Add support for MESH 11S for WCN3990
cover Add support for MESH 11S for WCN3990
Currently, mesh 11s is not supported for WCN3990. This patchset add the changes to enable the mesh for WCN3990.
Surabhi Vishnoi (3):
ath10k: Add wmi tlv vdev subtype for mesh in WCN3990
ath10k: Do not send probe response template for mesh
ath10k: Add wmi tlv service map for mesh 11s
drivers/net/wireless/ath/ath10k/mac.c | 4 ++++ drivers/net/wireless/ath/ath10k/wmi-tlv.c | 24 +++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 12 ++++++++++++ 3 files changed, 39 insertions(+), 1 deletion(-)
Signature · 7 lines
1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 1/3 ath10k: Add wmi tlv vdev subtype for mesh in WCN3990
There is a disparity in wmi and wmi tlv vdev subtype enum for WMI_VDEV_SUBTYPE_MESH_11S.
Add different enum for wmi tlv vdev subtype to support vdev of subtype mesh 11s for WCN3990.
Tested HW: WCN3990
--- drivers/net/wireless/ath/ath10k/wmi-tlv.c | 24 +++++++++++++++++++++++- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 10 ++++++++++ 2 files changed, 33 insertions(+), 1 deletion(-)
drivers/net/wireless/ath/ath10k/wmi-tlv.c +23 -1
@@ -1905,6 +1905,28 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_init(struct ath10k *ar)return skb; } +static int ath10k_wmi_tlv_op_get_vdev_subtype (struct ath10k *ar, +enum wmi_vdev_subtype subtype) +{ +switch (subtype) { +case WMI_VDEV_SUBTYPE_NONE : +return WMI_TLV_VDEV_SUBTYPE_NONE ; +case WMI_VDEV_SUBTYPE_P2P_DEVICE : +return WMI_TLV_VDEV_SUBTYPE_P2P_DEV ; +case WMI_VDEV_SUBTYPE_P2P_CLIENT : +return WMI_TLV_VDEV_SUBTYPE_P2P_CLI ; +case WMI_VDEV_SUBTYPE_P2P_GO : +return WMI_TLV_VDEV_SUBTYPE_P2P_GO ; +case WMI_VDEV_SUBTYPE_PROXY_STA : +return WMI_TLV_VDEV_SUBTYPE_PROXY_STA ; +case WMI_VDEV_SUBTYPE_MESH_11S : +return WMI_TLV_VDEV_SUBTYPE_MESH_11S ; +case WMI_VDEV_SUBTYPE_MESH_NON_11S : +return -ENOTSUPP ; + } +return -ENOTSUPP ; +} +static struct sk_buff * ath10k_wmi_tlv_op_gen_vdev_create(struct ath10k *ar, u32 vdev_id,
@@ -4305,7 +4327,7 @@ static struct sk_buff *ath10k_wmi_tlv_op_gen_config_pno_stop(struct ath10k *ar, .gen_tdls_peer_update = ath10k_wmi_tlv_op_gen_tdls_peer_update, .gen_adaptive_qcs = ath10k_wmi_tlv_op_gen_adaptive_qcs, .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill, - .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype, + .get_vdev_subtype = ath10k_wmi_tlv_op_get_vdev_subtype, .gen_echo = ath10k_wmi_tlv_op_gen_echo, .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf, .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
drivers/net/wireless/ath/ath10k/wmi-tlv.h +10 -0
@@ -1775,6 +1775,16 @@ struct wmi_tlv_start_scan_cmd {struct wmi_mac_addr mac_mask; } __packed; +enum wmi_tlv_vdev_subtype { +WMI_TLV_VDEV_SUBTYPE_NONE =0 , +WMI_TLV_VDEV_SUBTYPE_P2P_DEV =1 , +WMI_TLV_VDEV_SUBTYPE_P2P_CLI =2 , +WMI_TLV_VDEV_SUBTYPE_P2P_GO =3 , +WMI_TLV_VDEV_SUBTYPE_PROXY_STA =4 , +WMI_TLV_VDEV_SUBTYPE_MESH =5 , +WMI_TLV_VDEV_SUBTYPE_MESH_11S =6 , +}; +struct wmi_tlv_vdev_start_cmd {__le32 vdev_id;__le32 requestor_id;
Signature · 7 lines
1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Re: [PATCH 1/3] ath10k: Add wmi tlv vdev subtype for mesh in WCN3990
Quoted 10 lines · Surabhi Vishnoi
There is a disparity in wmi and wmi tlv vdev subtype enum for
WMI_VDEV_SUBTYPE_MESH_11S.Add different enum for wmi tlv vdev subtype to support vdev of subtype mesh 11s for WCN3990.
Tested HW: WCN3990
Signed-off-by Surabhi Vishnoi <[email protected]>Signed-off-by Kalle Valo <[email protected]>
3 patches applied to ath-next branch of ath.git, thanks.
a7368c395fc3 ath10k: Add wmi tlv vdev subtype for mesh in WCN3990 97354f2c4327 ath10k: Do not send probe response template for mesh 7835d8f8792d ath10k: Add wmi tlv service map for mesh 11s
Signature · 3 lines
https://patchwork.kernel.org/patch/10904959/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Re: [PATCH 1/3] ath10k: Add wmi tlv vdev subtype for mesh in WCN3990
In reply to Surabhi VishnoiQuoted 10 lines · Surabhi Vishnoi
There is a disparity in wmi and wmi tlv vdev subtype enum for
WMI_VDEV_SUBTYPE_MESH_11S.Add different enum for wmi tlv vdev subtype to support vdev of subtype mesh 11s for WCN3990.
Tested HW: WCN3990
Signed-off-by Surabhi Vishnoi <[email protected]>Signed-off-by Kalle Valo <[email protected]>
3 patches applied to ath-next branch of ath.git, thanks.
a7368c395fc3 ath10k: Add wmi tlv vdev subtype for mesh in WCN3990 97354f2c4327 ath10k: Do not send probe response template for mesh 7835d8f8792d ath10k: Add wmi tlv service map for mesh 11s
Signature · 9 lines
https://patchwork.kernel.org/patch/10904959/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 2/3 ath10k: Do not send probe response template for mesh
In reply to Surabhi VishnoiCurrently mac80211 do not support probe response template for mesh point. When WMI_SERVICE_BEACON_OFFLOAD is enabled, host driver tries to configure probe response template for mesh, but it fails because the interface type is not NL80211_IFTYPE_AP but NL80211_IFTYPE_MESH_POINT.
To avoid this failure, skip sending probe response template to firmware for mesh point.
Tested HW: WCN3990/QCA6174/QCA9984
--- drivers/net/wireless/ath/ath10k/mac.c | 4 ++++ 1 file changed, 4 insertions(+)
drivers/net/wireless/ath/ath10k/mac.c +4 -0
@@ -1630,6 +1630,10 @@ static int ath10k_mac_setup_prb_tmpl(struct ath10k_vif *arvif)if (arvif->vdev_type !=WMI_VDEV_TYPE_AP )return 0 ; +/* For mesh, probe response and beacon share the same template */ +if (ieee80211_vif_is_mesh (vif)) +return 0 ; + prb =ieee80211_proberesp_get (hw, vif);if (!prb) {ath10k_warn (ar,"failed to get probe resp template from mac80211\n" );
Signature · 7 lines
1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
PATCH 3/3 ath10k: Add wmi tlv service map for mesh 11s
In reply to Surabhi VishnoiWCN3990 firmware advertises the service WMI_TLV_SERVICE_MESH_11S for mesh 11s. Map this wmi tlv service to enable mesh 11s for WCN3990.
Tested HW: WCN3990
--- drivers/net/wireless/ath/ath10k/wmi-tlv.h | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/wireless/ath/ath10k/wmi-tlv.h +2 -0
@@ -1567,6 +1567,8 @@ enum wmi_tlv_service { WMI_SERVICE_SAP_AUTH_OFFLOAD, len);SVCMAP (WMI_TLV_SERVICE_MGMT_TX_WMI ,WMI_SERVICE_MGMT_TX_WMI , len); +SVCMAP (WMI_TLV_SERVICE_MESH_11S , +WMI_SERVICE_MESH_11S , len); } static inline void
Signature · 7 lines
1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k