sysreset: syscon: remove POWER reset cause
PATCH 1/1 sysreset: syscon: remove POWER reset cause
The sysreset of 'POWER' type is a PMIC reset defined as 'remove and restore power'.
So normally only COLD/WARN is supported by sysreset_syscon.
This modification allows to use the function sysreset_walk(SYSRESET_POWER) when it is supported by PMIC driver (see example in stpmic1).
Signed-off-by Patrick Delaunay <[email protected]>
---
drivers/sysreset/sysreset_syscon.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/sysreset/sysreset_syscon.c +3 -0
@@ -24,6 +24,9 @@ static int syscon_reboot_request(struct udevice *dev, enum sysreset_t type) {struct syscon_reboot_priv *priv =dev_get_priv (dev); +if (type ==SYSRESET_POWER ) +return -EPROTONOSUPPORT ; +regmap_write (priv->regmap, priv->offset, priv->mask);return -EINPROGRESS ;
Signature · 1 line
2.7.4
Quoted 8 lines · Patrick Delaunay
The sysreset of 'POWER' type is a PMIC reset defined as 'remove and restore power'.
So normally only COLD/WARN is supported bysysreset_syscon.This modification allows to use the function
sysreset_walk(SYSRESET_POWER)when it is supported by PMIC driver (see example in stpmic1).Signed-off-by Patrick Delaunay <[email protected]>
Applied to u-boot/master, thanks!
Signature · 8 lines
Tom -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 819 bytes Desc: not available URL: <http://lists.denx.de/pipermail/u-boot/attachments/20190427/6925dfde/attachment.sig>