Skip to contentSkip to conversation

Enable Bluetooth functionality for WCN3998.

PATCH In review Harish Bandi 2 participants 4 messages Apr 26, 2019

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v8 cover Enable Bluetooth functionality for WCN3998.

This patch series we add support for WCN3998 BT chip set. This new chip set is based from the WCN3990 with minimal power numbers. So here in this patch The major difference between wcn3990 and WCN3998 is only power numbers. where as init process and fw download is same with wcn3990.
So we add new compatible for WCN3998.
Removed the Reading of regulator values from dts.
Added new compatible for WCN3998.
Changes in V8:
Removed export of qca_is_wcn399x() and added as inline function Added robh reviewed by tag in commit text
Changes in V7:
Initialized rom_ver to 0 to fix compiler warning
Changed Commit text for DT patch
Changes in V6:
changed return value to false in the qca_is_wcn399x()stub Changes in V5:
changed is_qca_soc_type_wcn399x_family to
qca_is_wcn399x helper function
Moved the qca_is_wcn399x function to btqca.c
modified the DT document for wcn399x as per driver code
Changes in V4:
Added is_qca_soc_type_wcn399x_family helper function
to get the soc type is wcn399x or not.
Changes in V3:
updated to latest code base.

Harish Bandi (2):
Bluetooth: hci_qca: Added support for WCN3998
dt-bindings: net: bluetooth: Add device tree bindings for QTI chip

    WCN3998
 .../devicetree/bindings/net/qualcomm-bluetooth.txt |  5 +--
 drivers/bluetooth/btqca.c                          |  7 ++--
 drivers/bluetooth/btqca.h                          | 11 +++++-
 drivers/bluetooth/hci_qca.c                        | 40 ++++++++++++++--------
 4 files changed, 43 insertions(+), 20 deletions(-)
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#1 lore raw

PATCH v8 1/2 Bluetooth: hci_qca: Added support for WCN3998

Added new compatible for WCN3998 and corresponding voltage and current values to WCN3998 compatible.
Changed driver code to support WCN3998

---
Changes in V8:
- Removed export of qca_is_wcn399x() and added as inline function

---
 drivers/bluetooth/btqca.c   |  7 ++++---
 drivers/bluetooth/btqca.h   | 11 ++++++++++-
 drivers/bluetooth/hci_qca.c | 40 ++++++++++++++++++++++++++--------------
 3 files changed, 40 insertions(+), 18 deletions(-)
drivers/bluetooth/btqca.c +4 -3
index 6122685..cc12eec 100644
@@ -336,7 +336,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 {
 	struct rome_config config;
 	int err;
-	u8 rom_ver;
+	u8 rom_ver = 0;
 
 	bt_dev_dbg(hdev, "QCA setup on UART");
 
@@ -344,7 +344,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download rampatch file */
 	config.type = TLV_TYPE_PATCH;
-	if (soc_type == QCA_WCN3990) {
+	if (qca_is_wcn399x(soc_type)) {
 		/* Firmware files to download are based on ROM version.
 		 * ROM version is derived from last two bytes of soc_ver.
 		 */
@@ -365,7 +365,7 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 
 	/* Download NVM configuration */
 	config.type = TLV_TYPE_NVM;
-	if (soc_type == QCA_WCN3990)
+	if (qca_is_wcn399x(soc_type))
 		snprintf(config.fwname, sizeof(config.fwname),
 			 "qca/crnv%02x.bin", rom_ver);
 	else
@@ -410,6 +410,7 @@ int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 }
 EXPORT_SYMBOL_GPL(qca_set_bdaddr);
 
+
 MODULE_AUTHOR("Ben Young Tae Kim <[email protected]>");
 MODULE_DESCRIPTION("Bluetooth support for Qualcomm Atheros family ver " VERSION);
 MODULE_VERSION(VERSION);
drivers/bluetooth/btqca.h +10 -1
index 6fdc25d..4c4fe2b 100644
@@ -132,7 +132,8 @@ enum qca_btsoc_type {
 	QCA_INVALID = -1,
 	QCA_AR3002,
 	QCA_ROME,
-	QCA_WCN3990
+	QCA_WCN3990,
+	QCA_WCN3998,
 };
 
 #if IS_ENABLED(CONFIG_BT_QCA)
@@ -142,6 +143,10 @@ int qca_uart_setup(struct hci_dev *hdev, uint8_t baudrate,
 		   enum qca_btsoc_type soc_type, u32 soc_ver);
 int qca_read_soc_version(struct hci_dev *hdev, u32 *soc_version);
 int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
+static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
+{
+	return soc_type == QCA_WCN3990 || soc_type == QCA_WCN3998;
+}
 #else
 
 static inline int qca_set_bdaddr_rome(struct hci_dev *hdev, const bdaddr_t *bdaddr)
@@ -165,4 +170,8 @@ static inline int qca_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
 	return -EOPNOTSUPP;
 }
 
+static inline bool qca_is_wcn399x(enum qca_btsoc_type soc_type)
+{
+	return false;
+}
 #endif
drivers/bluetooth/hci_qca.c +26 -14
index 7f75652..c53ee8d 100644
@@ -521,7 +521,7 @@ static int qca_open(struct hci_uart *hu)
 	if (hu->serdev) {
 
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type != QCA_WCN3990) {
+		if (!qca_is_wcn399x(qcadev->btsoc_type)) {
 			gpiod_set_value_cansleep(qcadev->bt_en, 1);
 			/* Controller needs time to bootup. */
 			msleep(150);
@@ -629,7 +629,7 @@ static int qca_close(struct hci_uart *hu)
 
 	if (hu->serdev) {
 		qcadev = serdev_device_get_drvdata(hu->serdev);
-		if (qcadev->btsoc_type == QCA_WCN3990)
+		if (qca_is_wcn399x(qcadev->btsoc_type))
 			qca_power_shutdown(hu);
 		else
 			gpiod_set_value_cansleep(qcadev->bt_en, 0);
@@ -1011,7 +1011,7 @@ static int qca_set_baudrate(struct hci_dev *hdev, uint8_t baudrate)
 		      msecs_to_jiffies(CMD_TRANS_TIMEOUT_MS));
 
 	/* Give the controller time to process the request */
-	if (qca_soc_type(hu) == QCA_WCN3990)
+	if (qca_is_wcn399x(qca_soc_type(hu)))
 		msleep(10);
 	else
 		msleep(300);
@@ -1087,7 +1087,7 @@ static unsigned int qca_get_speed(struct hci_uart *hu,
 
 static int qca_check_speeds(struct hci_uart *hu)
 {
-	if (qca_soc_type(hu) == QCA_WCN3990) {
+	if (qca_is_wcn399x(qca_soc_type(hu))) {
 		if (!qca_get_speed(hu, QCA_INIT_SPEED) &&
 		    !qca_get_speed(hu, QCA_OPER_SPEED))
 			return -EINVAL;
@@ -1119,7 +1119,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		/* Disable flow control for wcn3990 to deassert RTS while
 		 * changing the baudrate of chip and host.
 		 */
-		if (soc_type == QCA_WCN3990)
+		if (qca_is_wcn399x(soc_type))
 			hci_uart_set_flow_control(hu, true);
 
 		qca_baudrate = qca_get_baudrate_value(speed);
@@ -1131,7 +1131,7 @@ static int qca_set_speed(struct hci_uart *hu, enum qca_speed_type speed_type)
 		host_set_baudrate(hu, speed);
 
 error:
-		if (soc_type == QCA_WCN3990)
+		if (qca_is_wcn399x(soc_type))
 			hci_uart_set_flow_control(hu, false);
 	}
 
@@ -1204,7 +1204,7 @@ static int qca_setup(struct hci_uart *hu)
 	/* Patch downloading has to be done without IBS mode */
 	clear_bit(STATE_IN_BAND_SLEEP_ENABLED, &qca->flags);
 
-	if (soc_type == QCA_WCN3990) {
+	if (qca_is_wcn399x(soc_type)) {
 		bt_dev_info(hdev, "setting up wcn3990");
 
 		/* Enable NON_PERSISTENT_SETUP QUIRK to ensure to execute
@@ -1235,7 +1235,7 @@ static int qca_setup(struct hci_uart *hu)
 		qca_baudrate = qca_get_baudrate_value(speed);
 	}
 
-	if (soc_type != QCA_WCN3990) {
+	if (!qca_is_wcn399x(soc_type)) {
 		/* Get QCA version information */
 		ret = qca_read_soc_version(hdev, &soc_ver);
 		if (ret)
@@ -1260,7 +1260,7 @@ static int qca_setup(struct hci_uart *hu)
 	}
 
 	/* Setup bdaddr */
-	if (soc_type == QCA_WCN3990)
+	if (qca_is_wcn399x(soc_type))
 		hu->hdev->set_bdaddr = qca_set_bdaddr;
 	else
 		hu->hdev->set_bdaddr = qca_set_bdaddr_rome;
@@ -1283,7 +1283,7 @@ static int qca_setup(struct hci_uart *hu)
 	.dequeue	= qca_dequeue,
 };
 
-static const struct qca_vreg_data qca_soc_data = {
+static const struct qca_vreg_data qca_soc_data_wcn3990 = {
 	.soc_type = QCA_WCN3990,
 	.vregs = (struct qca_vreg []) {
 		{ "vddio",   1800000, 1900000,  15000  },
@@ -1294,6 +1294,17 @@ static int qca_setup(struct hci_uart *hu)
 	.num_vregs = 4,
 };
 
+static const struct qca_vreg_data qca_soc_data_wcn3998 = {
+	.soc_type = QCA_WCN3998,
+	.vregs = (struct qca_vreg []) {
+		{ "vddio",   1800000, 1900000,  10000  },
+		{ "vddxo",   1800000, 1900000,  80000  },
+		{ "vddrf",   1300000, 1352000,  300000 },
+		{ "vddch0",  3300000, 3300000,  450000 },
+	},
+	.num_vregs = 4,
+};
+
 static void qca_power_shutdown(struct hci_uart *hu)
 {
 	struct qca_data *qca = hu->priv;
@@ -1427,8 +1438,8 @@ static int qca_serdev_probe(struct serdev_device *serdev)
 	qcadev->serdev_hu.serdev = serdev;
 	data = of_device_get_match_data(&serdev->dev);
 	serdev_device_set_drvdata(serdev, qcadev);
-	if (data && data->soc_type == QCA_WCN3990) {
-		qcadev->btsoc_type = QCA_WCN3990;
+	if (data && qca_is_wcn399x(data->soc_type)) {
+		qcadev->btsoc_type = data->soc_type;
 		qcadev->bt_power = devm_kzalloc(&serdev->dev,
 						sizeof(struct qca_power),
 						GFP_KERNEL);
@@ -1492,7 +1503,7 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 {
 	struct qca_serdev *qcadev = serdev_device_get_drvdata(serdev);
 
-	if (qcadev->btsoc_type == QCA_WCN3990)
+	if (qca_is_wcn399x(qcadev->btsoc_type))
 		qca_power_shutdown(&qcadev->serdev_hu);
 	else
 		clk_disable_unprepare(qcadev->susclk);
@@ -1502,7 +1513,8 @@ static void qca_serdev_remove(struct serdev_device *serdev)
 
 static const struct of_device_id qca_bluetooth_of_match[] = {
 	{ .compatible = "qcom,qca6174-bt" },
-	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data},
+	{ .compatible = "qcom,wcn3990-bt", .data = &qca_soc_data_wcn3990},
+	{ .compatible = "qcom,wcn3998-bt", .data = &qca_soc_data_wcn3998},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, qca_bluetooth_of_match);
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
#2 lore raw

PATCH v8 2/2 dt-bindings: net: bluetooth: Add device tree bindings for QTI chip WCN3998

In reply to Harish Bandi

Add compatible string for the Qualcomm WCN3998 Bluetooth controller

---
Changes in V7:
- Added robh reviewed by tag in commit text

---
 Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)
Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt +3 -2
index 824c0e2..7ef6118 100644
@@ -11,20 +11,21 @@ Required properties:
  - compatible: should contain one of the following:
    * "qcom,qca6174-bt"
    * "qcom,wcn3990-bt"
+   * "qcom,wcn3998-bt"
 
 Optional properties for compatible string qcom,qca6174-bt:
 
  - enable-gpios: gpio specifier used to enable chip
  - clocks: clock provided to the controller (SUSCLK_32KHZ)
 
-Required properties for compatible string qcom,wcn3990-bt:
+Required properties for compatible string qcom,wcn399x-bt:
 
  - vddio-supply: VDD_IO supply regulator handle.
  - vddxo-supply: VDD_XO supply regulator handle.
  - vddrf-supply: VDD_RF supply regulator handle.
  - vddch0-supply: VDD_CH0 supply regulator handle.
 
-Optional properties for compatible string qcom,wcn3990-bt:
+Optional properties for compatible string qcom,wcn399x-bt:
 
  - max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
 
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
maintainer
#3 lore raw
In reply to Harish Bandi

Hi Harish,

Quoted 31 lines

This patch series we add support for WCN3998 BT chip set. This new chip set is based from the WCN3990 with minimal power numbers. So here in this patch The major difference between wcn3990 and WCN3998 is only power numbers. where as init process and fw download is same with wcn3990.
So we add new compatible for WCN3998.
Removed the Reading of regulator values from dts.
Added new compatible for WCN3998.
Changes in V8:
Removed export of qca_is_wcn399x() and added as inline function Added robh reviewed by tag in commit text
Changes in V7:
Initialized rom_ver to 0 to fix compiler warning
Changed Commit text for DT patch
Changes in V6:
changed return value to false in the qca_is_wcn399x()stub Changes in V5:
changed is_qca_soc_type_wcn399x_family to
qca_is_wcn399x helper function
Moved the qca_is_wcn399x function to btqca.c
modified the DT document for wcn399x as per driver code
Changes in V4:
Added is_qca_soc_type_wcn399x_family helper function
to get the soc type is wcn399x or not.
Changes in V3:
updated to latest code base.

Harish Bandi (2):
Bluetooth: hci_qca: Added support for WCN3998
dt-bindings: net: bluetooth: Add device tree bindings for QTI chip
WCN3998

Quoted 5 lines
.../devicetree/bindings/net/qualcomm-bluetooth.txt |  5 +--
drivers/bluetooth/btqca.c                          |  7 ++--
drivers/bluetooth/btqca.h                          | 11 +++++-
drivers/bluetooth/hci_qca.c                        | 40 ++++++++++++++--------
4 files changed, 43 insertions(+), 20 deletions(-)

both patches have been applied to bluetooth-next tree.

Regards

Marcel