ath10k: add peer id check in ath10k_peer_find_by_id
PATCH v2 1/1 ath10k: add peer id check in ath10k_peer_find_by_id
For some SDIO chip, the peer id is 65535 for MPDU with error status, then test_bit will trigger buffer overflow for peer's memory, if kasan enabled, it will report error.
Reason is when station is in disconnecting status, firmware do not delete the peer info since it not disconnected completely, meanwhile some AP will still send data packet to station, then hardware will receive the packet and send to firmware, firmware's logic will report peer id of 65535 for MPDU with error status.
Add check for overflow the size of peer's peer_ids will avoid the buffer overflow access.
Call trace of kasan:
dump_backtrace+0x0/0x2ec show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xc8/0xec print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load8_noabort+0x20/0x2c ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core] ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core] ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core] ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio] process_sdio_pending_irqs+0xec/0x370 sdio_run_irqs+0x68/0xe4 sdio_irq_work+0x1c/0x28 process_one_work+0x3d8/0x8b0 worker_thread+0x508/0x7cc kthread+0x24c/0x264 ret_from_fork+0x10/0x18
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.
---
v2: changed from BITS_PER_BYTE to BITS_PER_TYPE
drivers/net/wireless/ath/ath10k/txrx.c | 3 +++ 1 file changed, 3 insertions(+)
drivers/net/wireless/ath/ath10k/txrx.c +3 -0
@@ -157,6 +157,9 @@ struct ath10k_peer *ath10k_peer_find_by_id(struct ath10k *ar, int peer_id) {struct ath10k_peer *peer; +if (peer_id >=BITS_PER_TYPE (peer->peer_ids)) +return NULL ; +lockdep_assert_held (&ar->data_lock);list_for_each_entry (peer, &ar->peers, list)
Signature · 7 lines
1.9.1 _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k
Quoted 1 line
Signed-off-by Wen Gong <[email protected]>
Quoted 33 lines · Wen Gong
For some SDIO chip, the peer id is 65535 for MPDU with error status, then
test_bitwill trigger buffer overflow for peer's memory, if kasan enabled, it will report error.Reason is when station is in disconnecting status, firmware do not delete the peer info since it not disconnected completely, meanwhile some AP will still send data packet to station, then hardware will receive the packet and send to firmware, firmware's logic will report peer id of 65535 for MPDU with error status.
Add check for overflow the size of peer's
peer_idswill avoid the buffer overflow access.Call trace of kasan:
dump_backtrace+0x0/0x2ec show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xc8/0xec print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load8_noabort+0x20/0x2c ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core] ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core] ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core] ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio] process_sdio_pending_irqs+0xec/0x370 sdio_run_irqs+0x68/0xe4 sdio_irq_work+0x1c/0x28 process_one_work+0x3d8/0x8b0 worker_thread+0x508/0x7cc kthread+0x24c/0x264 ret_from_fork+0x10/0x18
Quoted 5 lines
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.Signed-off-by Wen Gong <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
49ed34b835e2 ath10k: add peer id check in ath10k_peer_find_by_id
Signature · 3 lines
https://patchwork.kernel.org/patch/10921671/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Quoted 33 lines · Wen Gong
For some SDIO chip, the peer id is 65535 for MPDU with error status, then
test_bitwill trigger buffer overflow for peer's memory, if kasan enabled, it will report error.Reason is when station is in disconnecting status, firmware do not delete the peer info since it not disconnected completely, meanwhile some AP will still send data packet to station, then hardware will receive the packet and send to firmware, firmware's logic will report peer id of 65535 for MPDU with error status.
Add check for overflow the size of peer's
peer_idswill avoid the buffer overflow access.Call trace of kasan:
dump_backtrace+0x0/0x2ec show_stack+0x20/0x2c __dump_stack+0x20/0x28 dump_stack+0xc8/0xec print_address_description+0x74/0x240 kasan_report+0x250/0x26c __asan_report_load8_noabort+0x20/0x2c ath10k_peer_find_by_id+0x180/0x1e4 [ath10k_core] ath10k_htt_t2h_msg_handler+0x100c/0x2fd4 [ath10k_core] ath10k_htt_htc_t2h_msg_handler+0x20/0x34 [ath10k_core] ath10k_sdio_irq_handler+0xcc8/0x1678 [ath10k_sdio] process_sdio_pending_irqs+0xec/0x370 sdio_run_irqs+0x68/0xe4 sdio_irq_work+0x1c/0x28 process_one_work+0x3d8/0x8b0 worker_thread+0x508/0x7cc kthread+0x24c/0x264 ret_from_fork+0x10/0x18
Quoted 5 lines
Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.Signed-off-by Wen Gong <[email protected]>Signed-off-by Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
49ed34b835e2 ath10k: add peer id check in ath10k_peer_find_by_id
Signature · 9 lines
https://patchwork.kernel.org/patch/10921671/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches _______________________________________________ ath10k mailing list [email protected] http://lists.infradead.org/mailman/listinfo/ath10k