xen/arm: Black list everything with a PPI
PATCH 1/1 xen/arm: Black list everything with a PPI
XEN should not forward PPIs to Dom0 as it only support SPIs. One of solution to this problem is to skip any device that uses PPI source completely while building domain itself.
This patch goes through all the interrupt sources of device and skip it if one of interrupt source is PPI. It fixes XEN boot on i.MX8MQ by skipping PMU node.
---
* This replaces following patch.
https://patchwork.kernel.org/patch/10899881/
--- xen/arch/arm/domain_build.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
xen/arch/arm/domain_build.c +16 -1
@@ -1334,6 +1334,7 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo,DT_MATCH_COMPATIBLE ("arm,cortex-a15-pmu" ),DT_MATCH_COMPATIBLE ("arm,cortex-a53-edac" ),DT_MATCH_COMPATIBLE ("arm,armv8-pmuv3" ), +DT_MATCH_COMPATIBLE ("arm,cortex-a53-pmu" ),DT_MATCH_PATH ("/cpus" ), DT_MATCH_TYPE("memory"),/* The memory mapped timer is not supported by Xen. */
@@ -1353,7 +1354,7 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo, { /* sentinel */ }, };struct dt_device_node *child; -int res; +int res, i, nirq, irq_id;const char *name;const char *path;
@@ -1399,6 +1400,20 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo,return 0 ; } +/* Skip the node, using PPI source */ + nirq =dt_number_of_irq (node); + +for ( i =0 ; i < nirq ; i++ ) + { + irq_id =platform_get_irq (node, i); + +if ( irq_id >=16 && irq_id <32 ) + { +dt_dprintk (" Skip node with (PPI source)\n" ); +return 0 ; + } + } +/* * Xen is using some path for its own purpose. Warn if a node * already exists with the same path.
Signature · 7 lines
2.7.4 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Sorry Just sent the wrong patch , Please ignore this.
Quoted 61 lines · Amit Singh Tomar
XEN should not forward PPIs to Dom0 as it only support SPIs. One of solution to this problem is to skip any device that uses PPI source completely while building domain itself.
This patch goes through all the interrupt sources of device and skip it if one of interrupt source is PPI. It fixes XEN boot on i.MX8MQ by skipping PMU node.
Suggested-by Julien Grall <[email protected]>Signed-off-by Amit Singh Tomar <[email protected]>---
* This replaces following patch.
https://patchwork.kernel.org/patch/10899881/--- xen/arch/arm/domain_build.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)xen/arch/arm/domain_build.c +16
-2@@ -1334,6 +1334,7 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo,DT_MATCH_COMPATIBLE ("arm,cortex-a15-pmu" ),DT_MATCH_COMPATIBLE ("arm,cortex-a53-edac" ),DT_MATCH_COMPATIBLE ("arm,armv8-pmuv3" ), +DT_MATCH_COMPATIBLE ("arm,cortex-a53-pmu" ),DT_MATCH_PATH ("/cpus" ), DT_MATCH_TYPE("memory"),/* The memory mapped timer is not supported by Xen. */ @@ -1353,7 +1354,7 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo, { /* sentinel */ }, };struct dt_device_node *child; -int res; +int res, i, nirq, irq_id;const char *name;const char *path;@@ -1399,6 +1400,20 @@ static int __init handle_node(struct domain *d, struct kernel_info *kinfo,return 0 ; } +/* Skip the node, using PPI source */ + nirq =dt_number_of_irq (node); + +for ( i =0 ; i < nirq ; i++ ) + { + irq_id =platform_get_irq (node, i); + +if ( irq_id >=16 && irq_id <32 ) + { +dt_dprintk (" Skip node with (PPI source)\n" ); +return 0 ; + } + } +/* * Xen is using some path for its own purpose. Warn if a node * already exists with the same path. --
Quoted 2 lines
2.7.4
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel