cifs: fix strcat buffer overflow in smb21_set_oplock_level()
Subsystems (2)
PATCH 1/1 cifs: fix strcat buffer overflow in smb21_set_oplock_level()
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if cinode->oplock is unset by another thread after "RHW" or "RH" had been written to message.
--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
fs/cifs/smb2ops.c +1 -1
@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); }
Signature · 1 line
2.1.4
I think strcpy is clearer - but I don't think it can overflow since if R, W or W were written to "message" then cinode->oplock would be non-zero so we would never strcap "None"
Quoted 27 lines · Christoph Probst
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if
cinode->oplockis unset by another thread after "RHW" or "RH" had been written to message.Signed-off-by Christoph Probst <[email protected]>--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/cifs/smb2ops.c +1
-2@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); } --2.1.4
Signature · 3 lines
Thanks, Steve
Quoted 3 lines · Steve French via samba-technical
I think strcpy is clearer - but I don't think it can overflow since if R, W or W were written to "message" then
cinode->oplockwould be non-zero so we would never strcap "None"
Ahem. In Samba we have :
lib/util/safe_string.h:#define strcpy(dest,src) __ERROR__XX__NEVER_USE_STRCPY___;
Maybe you should do likewise :-).
Quoted 35 lines · Christoph Probst
Quoted 27 lines
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if
cinode->oplockis unset by another thread after "RHW" or "RH" had been written to message.Signed-off-by Christoph Probst <[email protected]>--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/cifs/smb2ops.c +1
-2@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); } --2.1.4
Signature · 3 lines
Thanks, Steve
We could always switch it to strncpy :)
In any case - he is correct, it is better than what was there because we should not strcat unless the array were locked across the whole function
Quoted 47 lines · Jeremy Allison
Quoted 3 lines · Steve French via samba-technical
I think strcpy is clearer - but I don't think it can overflow since if R, W or W were written to "message" then
cinode->oplockwould be non-zero so we would never strcap "None"Ahem. In Samba we have :
lib/util/safe_string.h:#define
strcpy(dest,src)__ERROR__XX__NEVER_USE_STRCPY___;Maybe you should do likewise :-).
Quoted 35 lines · Christoph Probst
Quoted 25 lines
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if
cinode->oplockis unset by another thread after "RHW" or "RH" had been written to message.Signed-off-by Christoph Probst <[email protected]>--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/cifs/smb2ops.c +1
-2@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); } --Quoted 2 lines
2.1.4
--
Thanks,Steve
Signature · 3 lines
Thanks, Steve
The patch itself is fine but I think we have a bigger problem here:
3052 >-------cinode->oplock = 0;
here we reset oplock level of the inode, so forcing all the IO go to the server.
3053 >-------if (oplock & SMB2_LEASE_READ_CACHING_HE) { 3054 >------->-------cinode->oplock |= CIFS_CACHE_READ_FLG; 3055 >------->-------strcat(message, "R");
3056 >-------}
3057 >-------if (oplock & SMB2_LEASE_HANDLE_CACHING_HE) { 3058 >------->-------cinode->oplock |= CIFS_CACHE_HANDLE_FLG; 3059 >------->-------strcat(message, "H");
3060 >-------}
3061 >-------if (oplock & SMB2_LEASE_WRITE_CACHING_HE) { 3062 >------->-------cinode->oplock |= CIFS_CACHE_WRITE_FLG;
this and 3 above cases are all racy with other threads opening the same file and the oplock break thread.
3063 >------->-------strcat(message, "W");
3064 >-------}
3065 >-------if (!cinode->oplock)
3066 >------->-------strcat(message, "None");
3067 >-------cifs_dbg(FYI, "%s Lease granted on inode %p\n", message, 3068 >------->------- &cinode->vfs_inode);
Besides the fix in the patch I would temporarily suggest to not touch cinode->oplock more than once in this function - have a local variable cifs_oplock which accumulates flags and set cinode->oplock at the very end. It reduce raciness a little bit but this code requires much more thinking about proper locking I guess.
Best regards,
Pavel Shilovskiy
пн, 6 мая 2019 г. в 10:02, Steve French via samba-technical <[email protected]>:
Quoted 63 lines
We could always switch it to strncpy :)
In any case - he is correct, it is better than what was there because we should not strcat unless the array were locked across the whole function
Quoted 6 lines · Jeremy Allison
Quoted 3 lines · Steve French via samba-technical
I think strcpy is clearer - but I don't think it can overflow since if R, W or W were written to "message" then
cinode->oplockwould be non-zero so we would never strcap "None"Quoted 41 lines
Ahem. In Samba we have :
lib/util/safe_string.h:#define
strcpy(dest,src)__ERROR__XX__NEVER_USE_STRCPY___;Maybe you should do likewise :-).
Quoted 35 lines · Christoph Probst
Quoted 25 lines
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if
cinode->oplockis unset by another thread after "RHW" or "RH" had been written to message.Signed-off-by Christoph Probst <[email protected]>--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/cifs/smb2ops.c +1
-2@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); } --Quoted 2 lines
2.1.4
--
Thanks,Steve
--
Thanks,Steve
Quoted 2 lines · Pavel Shilovsky
The patch itself is fine but I think we have a bigger problem here:
Good point. Perhaps make update to the same patch to include both changes
Quoted 99 lines
3052 >-------cinode->oplock = 0;
here we reset oplock level of the inode, so forcing all the IO go to the server.
3053 >-------if (oplock &
SMB2_LEASE_READ_CACHING_HE) { 3054 >------->-------cinode->oplock |=CIFS_CACHE_READ_FLG; 3055 >------->-------strcat(message, "R");
3056 >-------}
3057 >-------if (oplock &SMB2_LEASE_HANDLE_CACHING_HE) { 3058 >------->-------cinode->oplock |=CIFS_CACHE_HANDLE_FLG; 3059 >------->-------strcat(message, "H");
3060 >-------}
3061 >-------if (oplock &SMB2_LEASE_WRITE_CACHING_HE) { 3062 >------->-------cinode->oplock |=CIFS_CACHE_WRITE_FLG;this and 3 above cases are all racy with other threads opening the same file and the oplock break thread.
3063 >------->-------strcat(message, "W");
3064 >-------}
3065 >-------if (!cinode->oplock)
3066 >------->-------strcat(message, "None");
3067 >-------cifs_dbg(FYI, "%s Lease granted on inode %p\n", message, 3068 >------->-------&cinode->vfs_inode);Besides the fix in the patch I would temporarily suggest to not touch
cinode->oplockmore than once in this function - have a local variablecifs_oplockwhich accumulates flags and setcinode->oplockat the very end. It reduce raciness a little bit but this code requires much more thinking about proper locking I guess.Best regards,
Pavel Shilovskiyпн, 6 мая 2019 г. в 10:02, Steve French via samba-technical <[email protected]>:
Quoted 63 lines
We could always switch it to strncpy :)
In any case - he is correct, it is better than what was there because we should not strcat unless the array were locked across the whole function
Quoted 6 lines · Jeremy Allison
Quoted 3 lines · Steve French via samba-technical
I think strcpy is clearer - but I don't think it can overflow since if R, W or W were written to "message" then
cinode->oplockwould be non-zero so we would never strcap "None"Quoted 41 lines
Ahem. In Samba we have :
lib/util/safe_string.h:#define
strcpy(dest,src)__ERROR__XX__NEVER_USE_STRCPY___;Maybe you should do likewise :-).
Quoted 35 lines · Christoph Probst
Quoted 25 lines
Change strcat to strcpy in the "None" case as it is never valid to append "None" to any other message. It may also overflow char message[5], in a race condition on cinode if
cinode->oplockis unset by another thread after "RHW" or "RH" had been written to message.Signed-off-by Christoph Probst <[email protected]>--- fs/cifs/smb2ops.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)fs/cifs/smb2ops.c +1
-2@@ -2936,7 +2936,7 @@ smb21_set_oplock_level(struct cifsInodeInfo *cinode, __u32 oplock,strcat (message,"W" ); }if (!cinode->oplock) -strcat (message,"None" ); +strcpy (message,"None" );cifs_dbg (FYI ,"%s Lease granted on inode %p\n" , message, &cinode->vfs_inode); } --Quoted 2 lines
2.1.4
--
Thanks,Steve
--
Thanks,Steve
Signature · 3 lines
Thanks, Steve
Steve French schrieb am 06.05.2019 um 23:18 Uhr:
Quoted 6 lines
Quoted 2 lines · Pavel Shilovsky
The patch itself is fine but I think we have a bigger problem here:
Good point. Perhaps make update to the same patch to include both changes
I'll update my patch to implement the change suggested by Pavel.
I'll also switch the strcat to strncat and use strncpy in the "None"-case.
Regards,
Christoph
From: Christoph Probst
Quoted 6 lines
Sent: 07 May 2019 07:10
Steve French schrieb am 06.05.2019 um 23:18 Uhr:Quoted 3 lines
Quoted 1 line · Pavel Shilovsky
Quoted 7 lines
Quoted 3 lines
Quoted 1 line
The patch itself is fine but I think we have a bigger problem here:
Good point. Perhaps make update to the same patch to include both changes
I'll update my patch to implement the change suggested by Pavel.
I'll also switch the strcat to strncat and use strncpy in the "None"-case.
strncat() is never the function you are looking for. The 'n' is the maximum number of bytes to copy, not the length of the target buffer.
David
-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)