dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
PATCH v4 1/3 dt-bindings: watchdog: move i.MX system controller watchdog binding to SCU
i.MX system controller watchdog depends on SCU driver to support interrupt function, so it needs to be subnode of SCU node in DT, binding doc should be moved to fsl,scu.txt as well.
---
No change.
--- .../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++ .../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ---------------------- 2 files changed, 15 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt
Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt +15 -0
@@ -133,6 +133,16 @@ RTC bindings based on SCU Message Protocol Required properties: - compatible: should be "fsl,imx8qxp-sc-rtc"; +Watchdog bindings based on SCU Message Protocol +------------------------------------------------------------ + +Required properties: +- compatible: should be: + "fsl,imx8qxp-sc-wdt" + followed by "fsl,imx-sc-wdt"; +Optional properties: +- timeout-sec: contains the watchdog timeout in seconds. + Example (imx8qxp): ------------- aliases {
@@ -185,6 +195,11 @@ firmware { rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; };
Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt deleted +0 -24
@@ -1,24 +0,0 @@ -* Freescale i.MX System Controller Watchdog - -i.MX system controller watchdog is for i.MX SoCs with system controller inside, -the watchdog is managed by system controller, users can ONLY communicate with -system controller from secure mode for watchdog operations, so Linux i.MX system -controller watchdog driver will call ARM SMC API and trap into ARM-Trusted-Firmware -for watchdog operations, ARM-Trusted-Firmware is running at secure EL3 mode and -it will request system controller to execute the watchdog operation passed from -Linux kernel. - -Required properties: -- compatible: Should be : - "fsl,imx8qxp-sc-wdt" - followed by "fsl,imx-sc-wdt"; - -Optional properties: -- timeout-sec : Contains the watchdog timeout in seconds. - -Examples: - -watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; -};
Signature · 1 line
2.7.4
PATCH v4 2/3 arm64: dts: imx8qxp: Move watchdog node into scu node
i.MX system controller watchdog has pretimeout function which depends on i.MX SCU driver, so it should be a subnode of SCU.
---
No change.
--- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
arch/arm64/boot/dts/freescale/imx8qxp.dtsi +5 -5
@@ -149,6 +149,11 @@ rtc: rtc { compatible = "fsl,imx8qxp-sc-rtc"; }; + + watchdog { + compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; + timeout-sec = <60>; + }; }; timer {
@@ -517,9 +522,4 @@ power-domains = <&pd IMX_SC_R_GPIO_7>; }; }; - - watchdog { - compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt"; - timeout-sec = <60>; - }; };
Signature · 1 line
2.7.4
PATCH v4 3/3 watchdog: imx_sc: Add pretimeout support
In reply to Anson Huangi.MX system controller watchdog can support pretimeout IRQ via general SCU MU IRQ, it depends on IMX_SCU and driver MUST be probed after SCU IPC ready, then enable corresponding SCU IRQ group and register SCU IRQ notifier, when watchdog pretimeout IRQ fires, SCU MU IRQ will be handled and watchdog pretimeout notifier will be called to handle the event.
---
Changes since V3:
- use devm_add_action_or_reset instead of devm_add_action to make sure action is taken if add action failed;
- only enable pretimeout function if everything success, including irq group enabled, irq notifier register and add action.
--- drivers/watchdog/Kconfig | 1 + drivers/watchdog/imx_sc_wdt.c | 116 +++++++++++++++++++++++++++++++++++------- 2 files changed, 98 insertions(+), 19 deletions(-)
drivers/watchdog/Kconfig +1 -0
@@ -710,6 +710,7 @@ config IMX2_WDT config IMX_SC_WDT tristate "IMX SC Watchdog" depends on HAVE_ARM_SMCCC + depends on IMX_SCU select WATCHDOG_CORE help This is the driver for the system controller watchdog
drivers/watchdog/imx_sc_wdt.c +97 -19
180 lines not on this page · raw message
Signature · 1 line
2.7.4
Quoted 4 lines · Anson Huang
i.MX system controller watchdog depends on SCU driver to support interrupt function, so it needs to be subnode of SCU node in DT, binding doc should be moved to fsl,scu.txt as well.
Quoted 9 lines
Signed-off-by Anson Huang <[email protected]>---
No change.--- .../devicetree/bindings/arm/freescale/fsl,scu.txt | 15 ++++++++++++++ .../bindings/watchdog/fsl-imx-sc-wdt.txt | 24 ---------------------- 2 files changed, 15 insertions(+), 24 deletions(-) delete mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx-sc-wdt.txt