Enable PSCI services for booting Linux
Subsystems (3)
cover Enable PSCI services for booting Linux
From: "Ang, Chee Hong" <[email protected]>
Add "SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support for booting Linux on Stratix 10 platform.
Ang, Chee Hong (3):
ARM: socfpga: stratix10: Enable PSCI system reset
ARM: socfpga: stratix10: Enable PSCI CPU_ON
ARM: socfpga: stratix10: Enable PSCI support for Stratix 10
arch/arm/mach-socfpga/Kconfig | 9 ++++++- arch/arm/mach-socfpga/Makefile | 3 +++ arch/arm/mach-socfpga/psci.c | 56 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 67 insertions(+), 1 deletion(-) create mode 100644 arch/arm/mach-socfpga/psci.c
Signature · 1 line
2.7.4
PATCH 1/3 ARM: socfpga: stratix10: Enable PSCI system reset
From: "Ang, Chee Hong" <[email protected]>
Enable psci_system_reset support for Stratix10. This PSCI function will eventually trigger the mailbox HPS_REBOOT to SDM.
--- arch/arm/mach-socfpga/Makefile | 3 +++ arch/arm/mach-socfpga/psci.c | 21 +++++++++++++++++++++ 2 files changed, 24 insertions(+) create mode 100644 arch/arm/mach-socfpga/psci.c
arch/arm/mach-socfpga/Makefile +3 -0
@@ -38,6 +38,9 @@ obj-y += system_manager_s10.o obj-y += timer_s10.o obj-y += wrap_pinmux_config_s10.o obj-y += wrap_pll_config_s10.o +ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_ARMV8_PSCI) += psci.o +endif endif ifdef CONFIG_SPL_BUILD
arch/arm/mach-socfpga/psci.c new file +21 -0
@@ -0,0 +1,21 @@ +/* +* Copyright (C) 2017 Intel Corporation <www.intel.com> +* +* SPDX-License-Identifier: GPL-2.0 +*/ + +#include <common.h> +#include <asm/io.h> +#include <asm/psci.h> +#include <errno.h> +#include <asm/arch/mailbox_s10.h> +#include <asm/secure.h> + +void __noreturn __secure psci_system_reset(void) +{ +mbox_send_cmd_psci (MBOX_ID_UBOOT ,MBOX_REBOOT_HPS , +MBOX_CMD_DIRECT ,0 ,NULL ,0 ,0 ,NULL ); + +while (1 ) + ; +}
Signature · 1 line
2.7.4
PATCH 2/3 ARM: socfpga: stratix10: Enable PSCI CPU_ON
In reply to chee.hong.ang at intel.comFrom: "Ang, Chee Hong" <[email protected]>
Enable psci_cpu_on support for Stratix10. This PSCI function will pass the cpu release address for CPU1-CPU3. Then send event signal shall be triggered to get these CPUs running Linux code.
--- arch/arm/mach-socfpga/psci.c | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+)
arch/arm/mach-socfpga/psci.c +35 -0
@@ -11,6 +11,9 @@#include <asm/arch/mailbox_s10.h> #include <asm/secure.h> +static u64 psci_cpu_on_64_cpuid __secure_data; +static u64 psci_cpu_on_64_entry_point __secure_data; + void __noreturn __secure psci_system_reset(void) { mbox_send_cmd_psci(MBOX_ID_UBOOT, MBOX_REBOOT_HPS,
@@ -19,3 +22,35 @@ void __noreturn __secure psci_system_reset(void)while (1 ) ; } + +/* This function will handle multiple core release based PSCI */ +void __secure psci_cpu_on_64_mpidr(void) +{ + asmvolatile ( +".align 5 \n" +"1: wfe \n" +" ldr x0, [%0] \n" +" ldr x1, [%1] \n" +" mrs x2, mpidr_el1 \n" +" and x2, x2, #0xff \n" +" cmp x0, x2 \n" +" b.ne 1b \n" +" br x1 \n" + : :"r" (&psci_cpu_on_64_cpuid),"r" (&psci_cpu_on_64_entry_point) + :"x0" ,"x1" ,"x2" ,"memory" ,"cc" ); +} + +int __secure psci_cpu_on_64(u32 function_id, u64 cpuid, u64 entry_point) +{ +/* Releases all secondary CPUs to jump into psci_cpu_on_64_mpidr */ +writeq (0 , &psci_cpu_on_64_cpuid); +writeq (0 , &psci_cpu_on_64_entry_point); +writeq ((u64)&psci_cpu_on_64_mpidr,CPU_RELEASE_ADDR ); + +/* to store in global so psci_cpu_on_64_mpidr function can refer */ +writeq (entry_point, &psci_cpu_on_64_entry_point); +writeq (cpuid, &psci_cpu_on_64_cpuid); + asmvolatile ("sev" ); + +return ARM_PSCI_RET_SUCCESS ; +}
Signature · 1 line
2.7.4
PATCH 3/3 ARM: socfpga: stratix10: Enable PSCI support for Stratix 10
In reply to chee.hong.ang at intel.comFrom: "Ang, Chee Hong" <[email protected]>
The address of PSCI text, data and stack sections start at 0x00001000 (SDRAM).
--- arch/arm/mach-socfpga/Kconfig | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
arch/arm/mach-socfpga/Kconfig +8 -1
@@ -12,6 +12,12 @@ config SPL_SYS_MALLOC_F_LEN config SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION_TYPE default 0xa2 +config ARMV8_SECURE_BASE + default 0x00001000 if TARGET_SOCFPGA_STRATIX10 + +config SYS_HAS_ARMV8_SECURE_BASE + default y if TARGET_SOCFPGA_STRATIX10 + config SYS_MALLOC_F_LEN default 0x2000 if TARGET_SOCFPGA_ARRIA10 default 0x2000 if TARGET_SOCFPGA_GEN5
@@ -56,8 +62,9 @@ config TARGET_SOCFPGA_GEN5 config TARGET_SOCFPGA_STRATIX10 bool select ARMV8_MULTIENTRY + select ARMV8_PSCI + select ARMV8_SEC_FIRMWARE_SUPPORT select ARMV8_SET_SMPEN - select ARMV8_SPIN_TABLE select FPGA_STRATIX10 choice
Signature · 1 line
2.7.4
Ang
cover Enable PSCI services for booting Linux
In reply to chee.hong.ang at intel.comQuoted 10 lines · chee.hong.ang at intel.com
From: "Ang, Chee Hong" <[email protected]>
Add "
SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support for booting Linux on Stratix 10 platform.Ang, Chee Hong (3):
ARM: socfpga: stratix10: Enable PSCI system reset
ARM: socfpga: stratix10: Enable PSCICPU_ON
ARM: socfpga: stratix10: Enable PSCI support for Stratix 10
Quoted 7 lines
arch/arm/mach-socfpga/Kconfig | 9 ++++++-
arch/arm/mach-socfpga/Makefile | 3 +++
arch/arm/mach-socfpga/psci.c | 56
++++++++++++++++++++++++++++++++++++++++++3 files changed, 67 insertions(+), 1 deletion(-)create mode 100644
arch/arm/mach-socfpga/psci.c
Hi Marek,
Any comment on this ? These PSCI patches are needed for booting Linux on our S10 platform.
BR,
Ang
cover Enable PSCI services for booting Linux
Quoted 18 lines · Chee Hong
Quoted 10 lines · chee.hong.ang at intel.com
From: "Ang, Chee Hong" <[email protected]>
Add "
SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support for booting Linux on Stratix 10 platform.Ang, Chee Hong (3):
ARM: socfpga: stratix10: Enable PSCI system reset
ARM: socfpga: stratix10: Enable PSCICPU_ON
ARM: socfpga: stratix10: Enable PSCI support for Stratix 10Quoted 7 lines
arch/arm/mach-socfpga/Kconfig | 9 ++++++-
arch/arm/mach-socfpga/Makefile | 3 +++
arch/arm/mach-socfpga/psci.c | 56
++++++++++++++++++++++++++++++++++++++++++3 files changed, 67 insertions(+), 1 deletion(-)create mode 100644
arch/arm/mach-socfpga/psci.c
Quoted 4 lines
Hi Marek,
Any comment on this ? These PSCI patches are needed for booting Linux on our S10 platform.
Same questions as in Re: [PATCH v1 0/3] Enable HPS execution stage notification , can we stop adding more and more stuff to arch/ and instead add it to drivers/ ? As you might have noticed, we are trying to remove stuff from arch/ and move as much as possible to drivers/ , but S10 is doing the exact opposite :(
Signature · 2 lines
Best regards, Marek Vasut
Ang
cover Enable PSCI services for booting Linux
Quoted 26 lines · Marek Vasut
Quoted 20 lines · Chee Hong
Quoted 11 lines · chee.hong.ang at intel.com
From: "Ang, Chee Hong" <[email protected]>
Add "
SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support for booting Linux on Stratix 10 platform.Ang, Chee Hong (3):
ARM: socfpga: stratix10: Enable PSCI system reset
ARM: socfpga: stratix10: Enable PSCICPU_ON
ARM: socfpga: stratix10: Enable PSCI support for Stratix 10Quoted 7 lines
arch/arm/mach-socfpga/Kconfig | 9 ++++++-
arch/arm/mach-socfpga/Makefile | 3 +++
arch/arm/mach-socfpga/psci.c | 56
++++++++++++++++++++++++++++++++++++++++++3 files changed, 67 insertions(+), 1 deletion(-)create mode 100644
arch/arm/mach-socfpga/psci.cQuoted 5 lines
Hi Marek,
Any comment on this ? These PSCI patches are needed for booting Linux
on our S10 platform.
Quoted 8 lines
Same questions as in Re: [PATCH v1 0/3] Enable HPS execution stage notification , can we stop adding more and more stuff to
arch/and instead add it todrivers/? As you might have noticed, we are trying to
remove stuff fromarch/and move as much as possible todrivers/, but
S10 is doing the exact opposite :(
Not all PSCI code fit in DM (drivers/). There should be a good place to keep the PSCI code for our platform. Can you advise us where should we place those PSCI implementation other than arch/ ?
cover Enable PSCI services for booting Linux
Quoted 35 lines · Chee Hong
Quoted 26 lines · Marek Vasut
Quoted 20 lines · Chee Hong
Quoted 11 lines · chee.hong.ang at intel.com
From: "Ang, Chee Hong" <[email protected]>
Add "
SYTEM_RESET" (cold reset) and "CPU_ON" (SMP) PSCI support for booting Linux on Stratix 10 platform.Ang, Chee Hong (3):
ARM: socfpga: stratix10: Enable PSCI system reset
ARM: socfpga: stratix10: Enable PSCICPU_ON
ARM: socfpga: stratix10: Enable PSCI support for Stratix 10Quoted 7 lines
arch/arm/mach-socfpga/Kconfig | 9 ++++++-
arch/arm/mach-socfpga/Makefile | 3 +++
arch/arm/mach-socfpga/psci.c | 56
++++++++++++++++++++++++++++++++++++++++++3 files changed, 67 insertions(+), 1 deletion(-)create mode 100644
arch/arm/mach-socfpga/psci.cQuoted 5 lines
Hi Marek,
Any comment on this ? These PSCI patches are needed for booting Linux
on our S10 platform.Quoted 8 lines
Same questions as in Re: [PATCH v1 0/3] Enable HPS execution stage notification , can we stop adding more and more stuff to
arch/and instead add it todrivers/? As you might have noticed, we are trying to
remove stuff fromarch/and move as much as possible todrivers/, but
S10 is doing the exact opposite :(
Quoted 3 lines
Not all PSCI code fit in DM (
drivers/). There should be a good place to keep the PSCI code for our platform. Can you advise us where should we place those PSCI implementation other thanarch/?
Look through this discussion:
https://www.mail-archive.com/u-boot at lists.denx.de/msg319458.html and possibly follow up on it.
Signature · 2 lines
Best regards, Marek Vasut