Skip to contentSkip to conversation

dmaengine: tegra210-adma: Fixes for v5.2

PATCH Applied Jon Hunter 2 participants 5 messages May 16, 2019 – May 21, 2019

Subsystems (3)
lore
Share & tools
lore

Jon Hunter

author maintainer
#0 lore raw

cover dmaengine: tegra210-adma: Fixes for v5.2

Here are 3 fixes for the Tegra210 ADMA driver for v5.2.

Jon Hunter (3):
dmaengine: tegra210-adma: Fix crash during probe
dmaengine: tegra210-adma: Fix channel FIFO configuration
dmaengine: tegra210-adma: Fix spelling

 drivers/dma/tegra210-adma.c | 57 ++++++++++++++++++++++++++++-----------------
 1 file changed, 36 insertions(+), 21 deletions(-)
Signature · 1 line
2.7.4
author maintainer
#1 lore raw

PATCH 1/3 dmaengine: tegra210-adma: Fix crash during probe

Commit f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status") added support to save and restore the DMA channel registers when runtime suspending the ADMA. This change is causing the kernel to crash when probing the ADMA, if the device is probed deferred when looking up the channel interrupts. The crash occurs because not all of the channel base addresses have been setup at this point and in the clean-up path of the probe, pm_runtime_suspend() is called invoking its callback which expects all the channel base addresses to be initialised.

Although this could be fixed by simply checking for a NULL address, on further review of the driver it seems more appropriate that we only call pm_runtime_get_sync() after all the channel interrupts and base addresses have been configured. Therefore, fix this crash by moving the calls to pm_runtime_enable(), pm_runtime_get_sync() and tegra_adma_init() after the DMA channels have been initialised.

Fixes f33e7bb3eb92 ("dmaengine: tegra210-adma: restore channel status")
---
 drivers/dma/tegra210-adma.c | 26 +++++++++++++-------------
 1 file changed, 13 insertions(+), 13 deletions(-)
drivers/dma/tegra210-adma.c +13 -13
index 21f6be16d013..3ec3d71acd25 100644
@@ -845,16 +845,6 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		return PTR_ERR(tdma->ahub_clk);
 	}
 
-	pm_runtime_enable(&pdev->dev);
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0)
-		goto rpm_disable;
-
-	ret = tegra_adma_init(tdma);
-	if (ret)
-		goto rpm_put;
-
 	INIT_LIST_HEAD(&tdma->dma_dev.channels);
 	for (i = 0; i < tdma->nr_channels; i++) {
 		struct tegra_adma_chan *tdc = &tdma->channels[i];
@@ -873,6 +863,16 @@ static int tegra_adma_probe(struct platform_device *pdev)
 		tdc->tdma = tdma;
 	}
 
+	pm_runtime_enable(&pdev->dev);
+
+	ret = pm_runtime_get_sync(&pdev->dev);
+	if (ret < 0)
+		goto rpm_disable;
+
+	ret = tegra_adma_init(tdma);
+	if (ret)
+		goto rpm_put;
+
 	dma_cap_set(DMA_SLAVE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_PRIVATE, tdma->dma_dev.cap_mask);
 	dma_cap_set(DMA_CYCLIC, tdma->dma_dev.cap_mask);
@@ -916,13 +916,13 @@ static int tegra_adma_probe(struct platform_device *pdev)
 
 dma_remove:
 	dma_async_device_unregister(&tdma->dma_dev);
-irq_dispose:
-	while (--i >= 0)
-		irq_dispose_mapping(tdma->channels[i].irq);
 rpm_put:
 	pm_runtime_put_sync(&pdev->dev);
 rpm_disable:
 	pm_runtime_disable(&pdev->dev);
+irq_dispose:
+	while (--i >= 0)
+		irq_dispose_mapping(tdma->channels[i].irq);
 
 	return ret;
 }
Signature · 1 line
2.7.4
author maintainer
#2 lore raw

PATCH 2/3 dmaengine: tegra210-adma: Fix channel FIFO configuration

In reply to Jon Hunter

Commit ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips") removed the default settings DMA channel RX and TX FIFO sizes and this is breaking DMA transfers. The intention was to move the default settings to the chip specific data structure because this commit was preparing for adding support for Tegra186 where the fields for the FIFO CTRL register are slightly different.

Fix the configuration of the FIFO sizes by adding default values for the FIFO CTRL register for both Tegra210 and Tegra186 and store the values in the chip specific structure.

Fixes ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")
---
 drivers/dma/tegra210-adma.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)
drivers/dma/tegra210-adma.c +22 -7
index 3ec3d71acd25..3f50fd11c380 100644
@@ -53,10 +53,14 @@
 #define ADMA_CH_CONFIG_MAX_BUFS				8
 
 #define ADMA_CH_FIFO_CTRL				0x2c
-#define ADMA_CH_FIFO_CTRL_OVRFW_THRES(val)		(((val) & 0xf) << 24)
-#define ADMA_CH_FIFO_CTRL_STARV_THRES(val)		(((val) & 0xf) << 16)
-#define ADMA_CH_FIFO_CTRL_TX_FIFO_SIZE_SHIFT		8
-#define ADMA_CH_FIFO_CTRL_RX_FIFO_SIZE_SHIFT		0
+#define TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0xf) << 24)
+#define TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0xf) << 16)
+#define TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0xf) << 8)
+#define TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0xf)
+#define TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(val)	(((val) & 0x1f) << 24)
+#define TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(val)	(((val) & 0x1f) << 16)
+#define TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(val)		(((val) & 0x1f) << 8)
+#define TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(val)		((val) & 0x1f)
 
 #define ADMA_CH_LOWER_SRC_ADDR				0x34
 #define ADMA_CH_LOWER_TRG_ADDR				0x3c
@@ -71,8 +75,15 @@
 
 #define TEGRA_ADMA_BURST_COMPLETE_TIME			20
 
-#define ADMA_CH_FIFO_CTRL_DEFAULT	(ADMA_CH_FIFO_CTRL_OVRFW_THRES(1) | \
-					 ADMA_CH_FIFO_CTRL_STARV_THRES(1))
+#define TEGRA210_FIFO_CTRL_DEFAULT (TEGRA210_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
+				    TEGRA210_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
+				    TEGRA210_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
+				    TEGRA210_ADMA_CH_FIFO_CTRL_RXSIZE(3))
+
+#define TEGRA186_FIFO_CTRL_DEFAULT (TEGRA186_ADMA_CH_FIFO_CTRL_OFLWTHRES(1) | \
+				    TEGRA186_ADMA_CH_FIFO_CTRL_STRVTHRES(1) | \
+				    TEGRA186_ADMA_CH_FIFO_CTRL_TXSIZE(3)    | \
+				    TEGRA186_ADMA_CH_FIFO_CTRL_RXSIZE(3))
 
 #define ADMA_CH_REG_FIELD_VAL(val, mask, shift)	(((val) & mask) << shift)
 
@@ -85,6 +96,7 @@ struct tegra_adma;
  * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
  * @ch_req_rx_shift: Register offset for AHUB receive channel select.
  * @ch_base_offset: Reister offset of DMA channel registers.
+ * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
  * @ch_req_mask: Mask for Tx or Rx channel select.
  * @ch_req_max: Maximum number of Tx or Rx channels available.
  * @ch_reg_size: Size of DMA channel register space.
@@ -97,6 +109,7 @@ struct tegra_adma_chip_data {
 	unsigned int ch_req_tx_shift;
 	unsigned int ch_req_rx_shift;
 	unsigned int ch_base_offset;
+	unsigned int ch_fifo_ctrl;
 	unsigned int ch_req_mask;
 	unsigned int ch_req_max;
 	unsigned int ch_reg_size;
@@ -600,7 +613,7 @@ static int tegra_adma_set_xfer_params(struct tegra_adma_chan *tdc,
 			 ADMA_CH_CTRL_FLOWCTRL_EN;
 	ch_regs->config |= cdata->adma_get_burst_config(burst_size);
 	ch_regs->config |= ADMA_CH_CONFIG_WEIGHT_FOR_WRR(1);
-	ch_regs->fifo_ctrl = ADMA_CH_FIFO_CTRL_DEFAULT;
+	ch_regs->fifo_ctrl = cdata->ch_fifo_ctrl;
 	ch_regs->tc = desc->period_len & ADMA_CH_TC_COUNT_MASK;
 
 	return tegra_adma_request_alloc(tdc, direction);
@@ -784,6 +797,7 @@ static const struct tegra_adma_chip_data tegra210_chip_data = {
 	.ch_req_tx_shift	= 28,
 	.ch_req_rx_shift	= 24,
 	.ch_base_offset		= 0,
+	.ch_fifo_ctrl		= TEGRA210_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0xf,
 	.ch_req_max		= 10,
 	.ch_reg_size		= 0x80,
@@ -797,6 +811,7 @@ static const struct tegra_adma_chip_data tegra186_chip_data = {
 	.ch_req_tx_shift	= 27,
 	.ch_req_rx_shift	= 22,
 	.ch_base_offset		= 0x10000,
+	.ch_fifo_ctrl		= TEGRA186_FIFO_CTRL_DEFAULT,
 	.ch_req_mask		= 0x1f,
 	.ch_req_max		= 20,
 	.ch_reg_size		= 0x100,
Signature · 1 line
2.7.4
author maintainer
#3 lore raw

PATCH 3/3 dmaengine: tegra210-adma: Fix spelling

In reply to Jon Hunter

Correct spelling of 'register' in Tegra210 ADMA driver.

Fixes ded1f3db4cd6 ("dmaengine: tegra210-adma: prepare for supporting newer Tegra chips")
---
 drivers/dma/tegra210-adma.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/dma/tegra210-adma.c +1 -1
index 3f50fd11c380..17ea4dd99c62 100644
@@ -95,7 +95,7 @@ struct tegra_adma;
  * @global_int_clear: Register offset of DMA global interrupt clear.
  * @ch_req_tx_shift: Register offset for AHUB transmit channel select.
  * @ch_req_rx_shift: Register offset for AHUB receive channel select.
- * @ch_base_offset: Reister offset of DMA channel registers.
+ * @ch_base_offset: Register offset of DMA channel registers.
  * @ch_fifo_ctrl: Default value for channel FIFO CTRL register.
  * @ch_req_mask: Mask for Tx or Rx channel select.
  * @ch_req_max: Maximum number of Tx or Rx channels available.
Signature · 1 line
2.7.4
maintainer Applied
#4 lore raw
In reply to Jon Hunter
Quoted 2 lines · Jon Hunter

Here are 3 fixes for the Tegra210 ADMA driver for v5.2.

Applied all, thanks

Signature · 1 line
~Vinod