aspeed: Add support for the swift-bmc board
PATCH 1/1 aspeed: Add support for the swift-bmc board
From: Adriana Kobylak <[email protected]>
The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.
Signed-off-by Adriana Kobylak <[email protected]>
--- hw/arm/aspeed.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)
hw/arm/aspeed.c +41 -0
@@ -70,6 +70,9 @@ struct AspeedBoardState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* TODO: Swift hardware value: ? (use romulus definition for now) */ +#define SWIFT_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 +/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
@@ -290,6 +293,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),11 ),"ds1338" ,0x32 ); } +static void swift_bmc_i2c_init (AspeedBoardState *bmc) +{ +AspeedSoCState *soc = &bmc->soc; + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),3 ),"pca9552" ,0x60 ); + +/* The swift board expects a TMP275 but a TMP105 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),7 ),"tmp105" ,0x48 ); +/* The swift board expects a pca9551 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),7 ),"pca9552" ,0x60 ); + +/* The swift board expects an Epson RX8900 I2C RTC but a ds1338 is +* good enough */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),8 ),"ds1338" ,0x32 ); +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),8 ),"pca9552" ,0x60 ); + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),9 ),"tmp423" ,0x4c ); +/* The swift board expects a pca9539 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),9 ),"pca9552" ,0x74 ); + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),10 ),"tmp423" ,0x4c ); +/* The swift board expects a pca9539 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),10 ),"pca9552" ,0x74 ); + +/* The swift board expects a TMP275 but a TMP105 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),12 ),"tmp105" ,0x48 ); +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),12 ),"tmp105" ,0x4a ); +} +static void witherspoon_bmc_i2c_init (AspeedBoardState *bmc) {AspeedSoCState *soc = &bmc->soc;
@@ -400,6 +432,15 @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = romulus_bmc_i2c_init, }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .desc = "OpenPOWER Swift BMC (ARM1176)", + .soc_name = "ast2500-a1", + .hw_strap1 = SWIFT_BMC_HW_STRAP1, + .fmc_model = "mx66l1g45g", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = swift_bmc_i2c_init, + }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .desc = "OpenPOWER Witherspoon BMC (ARM1176)", .soc_name = "ast2500-a1",
Signature · 1 line
1.8.3.1
Quoted 6 lines · Adriana Kobylak
From: Adriana Kobylak <[email protected]>
The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.
Signed-off-by Adriana Kobylak <[email protected]>
This looks good !
Could you please run ./scripts/checkpatch.pl on your patch and send to mainline ? You will need to copy a few people and mailing lists. Run ./scripts/get_maintainer.pl to know who.
When done, you can add :
Reviewed-by Cédric Le Goater <[email protected]>
Thanks,
C.
Quoted 71 lines
--- hw/arm/aspeed.c | 41 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)hw/arm/aspeed.c +41
-0@@ -70,6 +70,9 @@ struct AspeedBoardState { SCU_AST2500_HW_STRAP_ACPI_ENABLE | \ SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER)) +/* TODO: Swift hardware value: ? (use romulus definition for now) */ +#define SWIFT_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1 +/* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */ #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1@@ -290,6 +293,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),11 ),"ds1338" ,0x32 ); } +static void swift_bmc_i2c_init (AspeedBoardState *bmc) +{ +AspeedSoCState *soc = &bmc->soc; + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),3 ),"pca9552" ,0x60 ); + +/* The swift board expects a TMP275 but a TMP105 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),7 ),"tmp105" ,0x48 ); +/* The swift board expects a pca9551 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),7 ),"pca9552" ,0x60 ); + +/* The swift board expects an Epson RX8900 I2C RTC but a ds1338 is +* good enough */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),8 ),"ds1338" ,0x32 ); +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),8 ),"pca9552" ,0x60 ); + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),9 ),"tmp423" ,0x4c ); +/* The swift board expects a pca9539 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),9 ),"pca9552" ,0x74 ); + +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),10 ),"tmp423" ,0x4c ); +/* The swift board expects a pca9539 but a pca9552 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),10 ),"pca9552" ,0x74 ); + +/* The swift board expects a TMP275 but a TMP105 is compatible */ +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),12 ),"tmp105" ,0x48 ); +i2c_create_slave (aspeed_i2c_get_bus (DEVICE (&soc->i2c),12 ),"tmp105" ,0x4a ); +} +static void witherspoon_bmc_i2c_init (AspeedBoardState *bmc) {AspeedSoCState *soc = &bmc->soc;@@ -400,6 +432,15 @@ static const AspeedBoardConfig aspeed_boards[] = { .num_cs = 2, .i2c_init = romulus_bmc_i2c_init, }, { + .name = MACHINE_TYPE_NAME("swift-bmc"), + .desc = "OpenPOWER Swift BMC (ARM1176)", + .soc_name = "ast2500-a1", + .hw_strap1 = SWIFT_BMC_HW_STRAP1, + .fmc_model = "mx66l1g45g", + .spi_model = "mx66l1g45g", + .num_cs = 2, + .i2c_init = swift_bmc_i2c_init, + }, { .name = MACHINE_TYPE_NAME("witherspoon-bmc"), .desc = "OpenPOWER Witherspoon BMC (ARM1176)", .soc_name = "ast2500-a1",