Skip to contentSkip to conversation

irqchip/irq-csky-mpintc: Update some features

PATCH Superseded [email protected] 2 participants 7 messages Jun 4, 2019

Subsystems (3)

v4 of 5 Superseded Latest is v5 →

lore
Share & tools
lore

[email protected]

author maintainer
#0 lore raw

v4 cover irqchip/irq-csky-mpintc: Update some features

From: Guo Ren <[email protected]>

Here are some patches for irq-csky-mpintc. Any feedback is welcome.

Changes for V4:
- Remove priority setting
- Add remove loop in csky_mpintc_handler in a seperate patch
- Add auto irq deliver fixup patch
- Add include file for devicetree document's example
- Add --cover-letter

Changes for V3:
- Use IRQ_TYPE_LEVEL_HIGH as default instead of IRQ_TYPE_NONE
- Remove unnecessary loop in csky_mpintc_handler
- Update commit log msg

Changes for V2:
- Fixup this_cpu_read() preempted problem
- Optimize the coding style
- Optimize #interrupt-cells to one style

Guo Ren (4):
irqchip/irq-csky-mpintc: Add triger type
dt-bindings: interrupt-controller: Update csky mpintc irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler

 .../bindings/interrupt-controller/csky,mpintc.txt  |  20 +++-
 drivers/irqchip/irq-csky-mpintc.c                  | 102 +++++++++++++++++++--
 2 files changed, 109 insertions(+), 13 deletions(-)
Signature · 1 line
2.7.4
author maintainer
#1 lore raw

PATCH v4 1/4 irqchip/irq-csky-mpintc: Add triger type

From: Guo Ren <[email protected]>

Support 4 triger types:
- IRQ_TYPE_LEVEL_HIGH
- IRQ_TYPE_LEVEL_LOW
- IRQ_TYPE_EDGE_RISING
- IRQ_TYPE_EDGE_FALLING

All of above could be set in DeviceTree file and it still compatible with the old DeviceTree format.

Cc Marc Zyngier <[email protected]>
---
 drivers/irqchip/irq-csky-mpintc.c | 80 ++++++++++++++++++++++++++++++++++++++-
 1 file changed, 78 insertions(+), 2 deletions(-)
drivers/irqchip/irq-csky-mpintc.c +78 -2
index c67c961..a451a07 100644
@@ -17,6 +17,7 @@
 #include <asm/reg_ops.h>
 
 static struct irq_domain *root_domain;
+
 static void __iomem *INTCG_base;
 static void __iomem *INTCL_base;
 
@@ -32,8 +33,8 @@ static void __iomem *INTCL_base;
 #define INTCG_CIDSTR	0x1000
 
 #define INTCL_PICTLR	0x0
+#define INTCL_CFGR	0x14
 #define INTCL_SIGR	0x60
-#define INTCL_HPPIR	0x68
 #define INTCL_RDYIR	0x6c
 #define INTCL_SENR	0xa0
 #define INTCL_CENR	0xa4
@@ -41,6 +42,35 @@ static void __iomem *INTCL_base;
 
 static DEFINE_PER_CPU(void __iomem *, intcl_reg);
 
+static unsigned long *__trigger;
+
+#define IRQ_OFFSET(irq) ((irq < COMM_IRQ_BASE) ? irq : (irq - COMM_IRQ_BASE))
+
+#define TRIG_BYTE_OFFSET(i)	((((i) * 2) / 32) * 4)
+#define TRIG_BIT_OFFSET(i)	 (((i) * 2) % 32)
+
+#define TRIG_VAL(trigger, irq)	(trigger << TRIG_BIT_OFFSET(IRQ_OFFSET(irq)))
+#define TRIG_VAL_MSK(irq)	    (~(3 << TRIG_BIT_OFFSET(IRQ_OFFSET(irq))))
+
+#define TRIG_BASE(irq) \
+	(TRIG_BYTE_OFFSET(IRQ_OFFSET(irq)) + ((irq < COMM_IRQ_BASE) ? \
+	(this_cpu_read(intcl_reg) + INTCL_CFGR) : (INTCG_base + INTCG_CICFGR)))
+
+static DEFINE_SPINLOCK(setup_lock);
+static void setup_trigger(unsigned long irq, unsigned long trigger)
+{
+	unsigned int tmp;
+
+	spin_lock(&setup_lock);
+
+	/* setup trigger */
+	tmp = readl_relaxed(TRIG_BASE(irq)) & TRIG_VAL_MSK(irq);
+
+	writel_relaxed(tmp | TRIG_VAL(trigger, irq), TRIG_BASE(irq));
+
+	spin_unlock(&setup_lock);
+}
+
 static void csky_mpintc_handler(struct pt_regs *regs)
 {
 	void __iomem *reg_base = this_cpu_read(intcl_reg);
@@ -56,6 +86,8 @@ static void csky_mpintc_enable(struct irq_data *d)
 {
 	void __iomem *reg_base = this_cpu_read(intcl_reg);
 
+	setup_trigger(d->hwirq, __trigger[d->hwirq]);
+
 	writel_relaxed(d->hwirq, reg_base + INTCL_SENR);
 }
 
@@ -73,6 +105,28 @@ static void csky_mpintc_eoi(struct irq_data *d)
 	writel_relaxed(d->hwirq, reg_base + INTCL_CACR);
 }
 
+static int csky_mpintc_set_type(struct irq_data *d, unsigned int type)
+{
+	switch (type & IRQ_TYPE_SENSE_MASK) {
+	case IRQ_TYPE_LEVEL_HIGH:
+		__trigger[d->hwirq] = 0;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		__trigger[d->hwirq] = 1;
+		break;
+	case IRQ_TYPE_EDGE_RISING:
+		__trigger[d->hwirq] = 2;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		__trigger[d->hwirq] = 3;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 #ifdef CONFIG_SMP
 static int csky_irq_set_affinity(struct irq_data *d,
 				 const struct cpumask *mask_val,
@@ -105,6 +159,7 @@ static struct irq_chip csky_irq_chip = {
 	.irq_eoi	= csky_mpintc_eoi,
 	.irq_enable	= csky_mpintc_enable,
 	.irq_disable	= csky_mpintc_disable,
+	.irq_set_type	= csky_mpintc_set_type,
 #ifdef CONFIG_SMP
 	.irq_set_affinity = csky_irq_set_affinity,
 #endif
@@ -125,9 +180,26 @@ static int csky_irqdomain_map(struct irq_domain *d, unsigned int irq,
 	return 0;
 }
 
+static int csky_irq_domain_xlate_cells(struct irq_domain *d,
+		struct device_node *ctrlr, const u32 *intspec,
+		unsigned int intsize, unsigned long *out_hwirq,
+		unsigned int *out_type)
+{
+	if (WARN_ON(intsize < 1))
+		return -EINVAL;
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1)
+		*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
+	else
+		*out_type = IRQ_TYPE_LEVEL_HIGH;
+
+	return 0;
+}
+
 static const struct irq_domain_ops csky_irqdomain_ops = {
 	.map	= csky_irqdomain_map,
-	.xlate	= irq_domain_xlate_onecell,
+	.xlate	= csky_irq_domain_xlate_cells,
 };
 
 #ifdef CONFIG_SMP
@@ -161,6 +233,10 @@ csky_mpintc_init(struct device_node *node, struct device_node *parent)
 	if (ret < 0)
 		nr_irq = INTC_IRQS;
 
+	__trigger  = kcalloc(nr_irq, sizeof(unsigned long), GFP_KERNEL);
+	if (__trigger == NULL)
+		return -ENXIO;
+
 	if (INTCG_base == NULL) {
 		INTCG_base = ioremap(mfcr("cr<31, 14>"),
 				     INTCL_SIZE*nr_cpu_ids + INTCG_SIZE);
Signature · 1 line
2.7.4
author maintainer
#2 lore raw

PATCH v4 2/4 dt-bindings: interrupt-controller: Update csky mpintc

In reply to [email protected]

From: Guo Ren <[email protected]>

Add trigger type setting for csky,mpintc. The driver also could support #interrupt-cells <1> and it wouldn't invalidate existing DTs. Here we only show the complete format.

---
 .../bindings/interrupt-controller/csky,mpintc.txt    | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)
Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt +16 -4
index ab921f1..e134053 100644
@@ -6,11 +6,16 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
 SMP soc, and it also could be used in non-SMP system.
 
 Interrupt number definition:
-
   0-15  : software irq, and we use 15 as our IPI_IRQ.
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
+Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
 =============================
 intc node bindings definition
 =============================
@@ -26,15 +31,22 @@ intc node bindings definition
 	- #interrupt-cells
 		Usage: required
 		Value type: <u32>
-		Definition: must be <1>
+		Definition: <2>
 	- interrupt-controller:
 		Usage: required
 
-Examples:
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
 ---------
+#include <dt-bindings/interrupt-controller/irq.h>
 
 	intc: interrupt-controller {
 		compatible = "csky,mpintc";
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 	};
+
+	device: device-example {
+		...
+		interrupts = <34 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&intc>;
+	};
Signature · 1 line
2.7.4
author maintainer
#3 lore raw

PATCH v4 3/4 irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

In reply to [email protected]

From: Guo Ren <[email protected]>

The csky,mpintc could deliver a external irq to one cpu or all cpus, but it couldn't deliver a external irq to a group of cpus with cpu_mask. So we only use auto deliver mode when affinity mask_val is equal to cpu_present_mask.

There is no limitation for only two cpus in SMP system.

Cc Marc Zyngier <[email protected]>
---
 drivers/irqchip/irq-csky-mpintc.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/irqchip/irq-csky-mpintc.c +13 -2
index a451a07..2740dd5 100644
@@ -143,8 +143,19 @@ static int csky_irq_set_affinity(struct irq_data *d,
 	if (cpu >= nr_cpu_ids)
 		return -EINVAL;
 
-	/* Enable interrupt destination */
-	cpu |= BIT(31);
+	/*
+	 * The csky,mpintc could support auto irq deliver, but it only
+	 * could deliver external irq to one cpu or all cpus. So it
+	 * doesn't support deliver external irq to a group of cpus
+	 * with cpu_mask.
+	 * SO we only use auto deliver mode when affinity mask_val is
+	 * equal to cpu_present_mask.
+	 *
+	 */
+	if (cpumask_equal(mask_val, cpu_present_mask))
+		cpu = 0;
+	else
+		cpu |= BIT(31);
 
 	writel_relaxed(cpu, INTCG_base + INTCG_CIDSTR + offset);
 
Signature · 1 line
2.7.4
#4 lore raw

Re: [PATCH V4 3/4] irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

Quoted 32 lines · On 04/06/2019 12:05, [email protected] wrote:

From: Guo Ren <[email protected]>

The csky,mpintc could deliver a external irq to one cpu or all cpus, but it couldn't deliver a external irq to a group of cpus with cpu_mask. So we only use auto deliver mode when affinity mask_val is equal to cpu_present_mask.

There is no limitation for only two cpus in SMP system.

Cc Marc Zyngier <[email protected]>
---
 drivers/irqchip/irq-csky-mpintc.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/irqchip/irq-csky-mpintc.c +6 -2
index a451a07..2740dd5 100644
@@ -143,8 +143,19 @@ static int csky_irq_set_affinity(struct irq_data *d,
 	if (cpu >= nr_cpu_ids)
 		return -EINVAL;
 
-	/* Enable interrupt destination */
-	cpu |= BIT(31);
+	/*
+	 * The csky,mpintc could support auto irq deliver, but it only
+	 * could deliver external irq to one cpu or all cpus. So it
+	 * doesn't support deliver external irq to a group of cpus
+	 * with cpu_mask.
+	 * SO we only use auto deliver mode when affinity mask_val is

drivers/irqchip/irq-csky-mpintc.c static int csky_irq_set_affinity(struct irq_data *d, · line 161

Quoted 10 lines
drivers/irqchip/irq-csky-mpintc.c +7 -0
+	 * equal to cpu_present_mask.
+	 *
+	 */
+	if (cpumask_equal(mask_val, cpu_present_mask))
+		cpu = 0;
+	else
+		cpu |= BIT(31);
 
 	writel_relaxed(cpu, INTCG_base + INTCG_CIDSTR + offset);
 

Isn't that the same patch as [1]? In which case, I've queued it as a fix already.

Thanks,

	M.

[1] https://lkml.org/lkml/2019/5/21/174

Signature · 1 line
Jazz is not dead. It just smells funny...
author maintainer
#5 lore raw

Re: [PATCH V4 3/4] irqchip/irq-csky-mpintc: Support auto irq deliver to all cpus

Hello Marc,

Quoted 41 lines · Marc Zyngier
Quoted 39 lines · On 04/06/2019 12:05, [email protected] wrote:

From: Guo Ren <[email protected]>

The csky,mpintc could deliver a external irq to one cpu or all cpus, but it couldn't deliver a external irq to a group of cpus with cpu_mask. So we only use auto deliver mode when affinity mask_val is equal to cpu_present_mask.

There is no limitation for only two cpus in SMP system.

Cc Marc Zyngier <[email protected]>
---
 drivers/irqchip/irq-csky-mpintc.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/irqchip/irq-csky-mpintc.c +13 -2
index a451a07..2740dd5 100644
@@ -143,8 +143,19 @@ static int csky_irq_set_affinity(struct irq_data *d,
      if (cpu >= nr_cpu_ids)
              return -EINVAL;
 
-     /* Enable interrupt destination */
-     cpu |= BIT(31);
+     /*
+      * The csky,mpintc could support auto irq deliver, but it only
+      * could deliver external irq to one cpu or all cpus. So it
+      * doesn't support deliver external irq to a group of cpus
+      * with cpu_mask.
+      * SO we only use auto deliver mode when affinity mask_val is
+      * equal to cpu_present_mask.
+      *
+      */
+     if (cpumask_equal(mask_val, cpu_present_mask))
+             cpu = 0;
+     else
+             cpu |= BIT(31);
 
Quoted 6 lines

drivers/irqchip/irq-csky-mpintc.c static int csky_irq_set_affinity(struct irq_data *d, · line 161

Quoted 3 lines
drivers/irqchip/irq-csky-mpintc.c +0 -0
      writel_relaxed(cpu, INTCG_base + INTCG_CIDSTR + offset);
 

Isn't that the same patch as [1]? In which case, I've queued it as a fix already.

Yes, they are the same. It's duplicate.

I think you've queued this one:
https://lore.kernel.org/lkml/[email protected]/

That's OK.

Best Regards
Guo Ren

author maintainer
#6 lore raw

PATCH v4 4/4 irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler

In reply to [email protected]

From: Guo Ren <[email protected]>

csky_mpintc_handler()
->handle_domain_irq()

    ->irq_exit()
      ->invoke_softirq()
        ->__do_softirq()
          ->local_irq_enable()

If new interrupt coming, it'll get into interrupt trap before return to csky_mpintc_handler(). So there is no need loop in csky_mpintc_handler.

Cc Marc Zyngier <[email protected]>
---
 drivers/irqchip/irq-csky-mpintc.c | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)
drivers/irqchip/irq-csky-mpintc.c +2 -5
index 2740dd5..122cd43 100644
@@ -75,11 +75,8 @@ static void csky_mpintc_handler(struct pt_regs *regs)
 {
 	void __iomem *reg_base = this_cpu_read(intcl_reg);
 
-	do {
-		handle_domain_irq(root_domain,
-				  readl_relaxed(reg_base + INTCL_RDYIR),
-				  regs);
-	} while (readl_relaxed(reg_base + INTCL_HPPIR) & BIT(31));
+	handle_domain_irq(root_domain,
+		readl_relaxed(reg_base + INTCL_RDYIR), regs);
 }
 
 static void csky_mpintc_enable(struct irq_data *d)
Signature · 1 line
2.7.4