Skip to contentSkip to conversation

i2c: busses: tegra: Add suspend-resume support

PATCH Superseded Bitan Biswas 2 participants 4 messages Jun 6, 2019

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 i2c: busses: tegra: Add suspend-resume support

Post suspend I2C registers have power on reset values. Before any transfer initialize I2C registers to prevent I2C transfer timeout and implement suspend and resume callbacks needed. Fix below errors post suspend:

1) Tegra I2C transfer timeout during jetson tx2 resume:

[   27.520613] pca953x 1-0074: calling pca953x_resume+0x0/0x1b0 @ 2939, parent: i2c-1
[   27.633623] tegra-i2c 3160000.i2c: i2c transfer timed out
[   27.639162] pca953x 1-0074: Unable to sync registers 0x3-0x5. -110
[   27.645336] pca953x 1-0074: Failed to sync GPIO dir registers: -110
[   27.651596] PM: dpm_run_callback(): pca953x_resume+0x0/0x1b0 returns -110
[   27.658375] pca953x 1-0074: pca953x_resume+0x0/0x1b0 returned -110 after 127152 usecs
[   27.666194] PM: Device 1-0074 failed to resume: error -110

2) Tegra I2C transfer timeout error on jetson Xavier post resume.

Remove i2c bus lock-unlock calls in resume callback as i2c_mark_adapter_* (suspended-resumed) help ensure i2c core calls from client are not executed before i2c-tegra resume.

---
 drivers/i2c/busses/i2c-tegra.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/i2c/busses/i2c-tegra.c +23 -0
index ebaa78d..76b7926 100644
@@ -1687,7 +1687,30 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static int tegra_i2c_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static int tegra_i2c_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = tegra_i2c_init(i2c_dev, false);
+	if (ret)
+		return ret;
+
+	i2c_mark_adapter_resumed(&i2c_dev->adapter);
+	return 0;
+}
+
 static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
 	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
 			   NULL)
 };
Signature · 1 line
2.7.4
#1 lore raw

06.06.2019 8:54, Bitan Biswas пишет:

Quoted 41 lines

Post suspend I2C registers have power on reset values. Before any transfer initialize I2C registers to prevent I2C transfer timeout and implement suspend and resume callbacks needed. Fix below errors post suspend:

1) Tegra I2C transfer timeout during jetson tx2 resume:

[   27.520613] pca953x 1-0074: calling pca953x_resume+0x0/0x1b0 @ 2939, parent: i2c-1
[   27.633623] tegra-i2c 3160000.i2c: i2c transfer timed out
[   27.639162] pca953x 1-0074: Unable to sync registers 0x3-0x5. -110
[   27.645336] pca953x 1-0074: Failed to sync GPIO dir registers: -110
[   27.651596] PM: dpm_run_callback(): pca953x_resume+0x0/0x1b0 returns -110
[   27.658375] pca953x 1-0074: pca953x_resume+0x0/0x1b0 returned -110 after 127152 usecs
[   27.666194] PM: Device 1-0074 failed to resume: error -110

2) Tegra I2C transfer timeout error on jetson Xavier post resume.

Remove i2c bus lock-unlock calls in resume callback as i2c_mark_adapter_* (suspended-resumed) help ensure i2c core calls from client are not executed before i2c-tegra resume.

---
 drivers/i2c/busses/i2c-tegra.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
drivers/i2c/busses/i2c-tegra.c +7 -0
index ebaa78d..76b7926 100644
@@ -1687,7 +1687,30 @@ static int tegra_i2c_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_PM_SLEEP
+static int tegra_i2c_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&i2c_dev->adapter);
+
+	return 0;

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1706

Quoted 10 lines
drivers/i2c/busses/i2c-tegra.c +10 -0
+}
+
+static int tegra_i2c_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = tegra_i2c_init(i2c_dev, false);
+	if (ret)
+		return ret;

We're expecting that tegra_i2c_init returns a error code on a failure and nothing else, hence it will be a bit more expressive to name the returned variable as "err". There is nothing wrong with yours variant, this is just a very minor recommendation from me. Please note that a bit more wise choice of the names makes easier to follow the code for other people and hence results in a cleaner code.

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1708

Quoted 2 lines
drivers/i2c/busses/i2c-tegra.c +2 -0
+
+	i2c_mark_adapter_resumed(&i2c_dev->adapter);

Please add a blank line here for a better readability and to make the patch consistent. You added the blank line in a similar case of tegra_i2c_suspend() and this makes it inconsistent.

Quoted 9 lines
drivers/i2c/busses/i2c-tegra.c +4 -0
+	return 0;
+}
+
 static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
 	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
 			   NULL)
 };
#2 lore raw
Quoted 51 lines · Dmitry Osipenko

06.06.2019 8:54, Bitan Biswas пишет:

Quoted 50 lines

Post suspend I2C registers have power on reset values. Before any transfer initialize I2C registers to prevent I2C transfer timeout and implement suspend and resume callbacks needed. Fix below errors post suspend:

1) Tegra I2C transfer timeout during jetson tx2 resume:

[   27.520613] pca953x 1-0074: calling pca953x_resume+0x0/0x1b0 @ 2939, parent: i2c-1
[   27.633623] tegra-i2c 3160000.i2c: i2c transfer timed out
[   27.639162] pca953x 1-0074: Unable to sync registers 0x3-0x5. -110
[   27.645336] pca953x 1-0074: Failed to sync GPIO dir registers: -110
[   27.651596] PM: dpm_run_callback(): pca953x_resume+0x0/0x1b0 returns -110
[   27.658375] pca953x 1-0074: pca953x_resume+0x0/0x1b0 returned -110 after 127152 usecs
[   27.666194] PM: Device 1-0074 failed to resume: error -110

2) Tegra I2C transfer timeout error on jetson Xavier post resume.

Remove i2c bus lock-unlock calls in resume callback as i2c_mark_adapter_* (suspended-resumed) help ensure i2c core calls from client are not executed before i2c-tegra resume.

---
  drivers/i2c/busses/i2c-tegra.c | 23 +++++++++++++++++++++++
  1 file changed, 23 insertions(+)
drivers/i2c/busses/i2c-tegra.c +16 -0
index ebaa78d..76b7926 100644
@@ -1687,7 +1687,30 @@ static int tegra_i2c_remove(struct platform_device *pdev)
  }
 
  #ifdef CONFIG_PM_SLEEP
+static int tegra_i2c_suspend(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+	i2c_mark_adapter_suspended(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static int tegra_i2c_resume(struct device *dev)
+{
+	struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = tegra_i2c_init(i2c_dev, false);
+	if (ret)
Quoted 8 lines

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1706

Quoted 1 line
drivers/i2c/busses/i2c-tegra.c +1 -0
+		return ret;

We're expecting that tegra_i2c_init returns a error code on a failure and nothing else, hence it will be a bit more expressive to name the returned variable as "err". There is nothing wrong with yours variant, this is just a very minor recommendation from me. Please note that a bit more wise choice of the names makes easier to follow the code for other people and hence results in a cleaner code.

Agreed.

Quoted 8 lines

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1708

Quoted 3 lines
drivers/i2c/busses/i2c-tegra.c +2 -0
+
+	i2c_mark_adapter_resumed(&i2c_dev->adapter);

Please add a blank line here for a better readability and to make the patch consistent. You added the blank line in a similar case of tegra_i2c_suspend() and this makes it inconsistent.

OK.

Quoted 9 lines

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1716

Quoted 9 lines
drivers/i2c/busses/i2c-tegra.c +4 -0
+	return 0;
+}
+
  static const struct dev_pm_ops tegra_i2c_pm = {
+	SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
  	SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend, tegra_i2c_runtime_resume,
  			   NULL)
  };

I shall send updated patch with suggested changes.

-thanks,
Bitan

#3 lore raw

06.06.2019 16:58, Bitan Biswas пишет:

Quoted 79 lines · Dmitry Osipenko
Quoted 56 lines

06.06.2019 8:54, Bitan Biswas пишет:

Quoted 55 lines

Post suspend I2C registers have power on reset values. Before any transfer initialize I2C registers to prevent I2C transfer timeout and implement suspend and resume callbacks needed. Fix below errors post suspend:

1) Tegra I2C transfer timeout during jetson tx2 resume:

[   27.520613] pca953x 1-0074: calling pca953x_resume+0x0/0x1b0 @ 2939, parent: i2c-1
[   27.633623] tegra-i2c 3160000.i2c: i2c transfer timed out [   27.639162] pca953x 1-0074: Unable to sync registers 0x3-0x5. -110 [   27.645336] pca953x 1-0074: Failed to sync GPIO dir registers: -110 [   27.651596] PM: dpm_run_callback(): pca953x_resume+0x0/0x1b0 returns -110
[   27.658375] pca953x 1-0074: pca953x_resume+0x0/0x1b0 returned -110 after 127152 usecs
[   27.666194] PM: Device 1-0074 failed to resume: error -110

2) Tegra I2C transfer timeout error on jetson Xavier post resume.

Remove i2c bus lock-unlock calls in resume callback as i2c_mark_adapter_*
(suspended-resumed) help ensure i2c core calls from client are not executed before i2c-tegra resume.

---
  drivers/i2c/busses/i2c-tegra.c | 23 +++++++++++++++++++++++

  1 file changed, 23 insertions(+)
drivers/i2c/busses/i2c-tegra.c +16 -0
index ebaa78d..76b7926 100644
@@ -1687,7 +1687,30 @@ static int tegra_i2c_remove(struct
 platform_device *pdev)
   }
     #ifdef CONFIG_PM_SLEEP
+static int tegra_i2c_suspend(struct device *dev)
+{
+    struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+
+    i2c_mark_adapter_suspended(&i2c_dev->adapter);
+
+    return 0;
+}
+
+static int tegra_i2c_resume(struct device *dev)
+{
+    struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
+    int ret;
+
+    ret = tegra_i2c_init(i2c_dev, false);
+    if (ret)
Quoted 8 lines

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct platform_device *pdev) · line 1706

Quoted 1 line
drivers/i2c/busses/i2c-tegra.c +1 -0
+        return ret;

We're expecting that tegra_i2c_init returns a error code on a failure and nothing else, hence it will be a bit more expressive to name the returned variable as "err". There is nothing wrong with yours variant, this is just a very minor recommendation from me. Please note that a bit more wise choice of the names makes easier to follow the code for other people and hence results in a cleaner code.

Agreed.

Quoted 8 lines

drivers/i2c/busses/i2c-tegra.c static int tegra_i2c_remove(struct · line 1708

Quoted 3 lines
drivers/i2c/busses/i2c-tegra.c +2 -0
+
+    i2c_mark_adapter_resumed(&i2c_dev->adapter);

Please add a blank line here for a better readability and to make the patch consistent. You added the blank line in a similar case of tegra_i2c_suspend() and this makes it inconsistent.

OK.

Quoted 11 lines
Quoted 10 lines
Quoted 10 lines
drivers/i2c/busses/i2c-tegra.c +4 -0
+    return 0;
+}
+
   static const struct dev_pm_ops tegra_i2c_pm = {
+    SET_SYSTEM_SLEEP_PM_OPS(tegra_i2c_suspend, tegra_i2c_resume)
       SET_RUNTIME_PM_OPS(tegra_i2c_runtime_suspend,
 tegra_i2c_runtime_resume,
                  NULL)

  };

I shall send updated patch with suggested changes.

Yes, please.