Skip to contentSkip to conversation

aspeed: Add support for the swift-bmc board

PATCH Superseded Adriana Kobylak 4 participants 5 messages Jun 3, 2019 – Jun 11, 2019 Arm/Aspeed machine support

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 aspeed: Add support for the swift-bmc board

From: Adriana Kobylak <[email protected]>

The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.

---
 hw/arm/aspeed.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
hw/arm/aspeed.c +42 -0
index 33070a6..cd95b3c 100644
@@ -73,6 +73,9 @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
+/* TODO: Swift hardware value: ? (use romulus definition for now) */
+#define SWIFT_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -287,6 +290,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -378,6 +410,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
     }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
+    }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
Signature · 1 line
1.8.3.1
maintainer Reviewed-by on v1 1/1
#1 lore raw
Quoted 17 lines · Adriana Kobylak

From: Adriana Kobylak <[email protected]>

The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.

---
 hw/arm/aspeed.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
hw/arm/aspeed.c +0 -0
index 33070a6..cd95b3c 100644

hw/arm/aspeed.c struct AspeedBoardState { · line 77

Quoted 5 lines
hw/arm/aspeed.c +2 -0
@@ -73,6 +73,9 @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
+/* TODO: Swift hardware value: ? (use romulus definition for now) */
+#define SWIFT_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1

I got this from hardware: 0xF11AD206

The rest looks okay.

Quoted 60 lines
hw/arm/aspeed.c +40 -1
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -287,6 +290,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -378,6 +410,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
     }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
+    }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
--

1.8.3.1

#2 lore raw
Quoted 21 lines · Joel Stanley
Quoted 20 lines · Adriana Kobylak

From: Adriana Kobylak <[email protected]>

The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.

---
 hw/arm/aspeed.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)
hw/arm/aspeed.c +0 -0
index 33070a6..cd95b3c 100644
@@ -73,6 +73,9 @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
Quoted 4 lines

hw/arm/aspeed.c struct AspeedBoardState { · line 77

Quoted 2 lines
hw/arm/aspeed.c +2 -0
+/* TODO: Swift hardware value: ? (use romulus definition for now) */
+#define SWIFT_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1

I got this from hardware: 0xF11AD206

There are two differences from the value noted in the comment below:

1. Bit 4 is clear in your value
2. Bit 20 is set in your value

Bit 4 is reserved, so not sure if we should care about the difference.

Bit 20 is the SuperIO decode disable bit. I don't think we care much about it at the moment, but we may as we model more of the LPC interface in the future.

Andrew

Quoted 66 lines

The rest looks okay.

Quoted 60 lines
hw/arm/aspeed.c +40 -1
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -287,6 +290,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -378,6 +410,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
     }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
+    }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
--

1.8.3.1

#3 lore raw

PATCH v2 1/1 aspeed: Add support for the swift-bmc board

From: Adriana Kobylak <[email protected]>

The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.

---
 hw/arm/aspeed.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
hw/arm/aspeed.c +50 -0
index 33070a6..7fd0e0c 100644
@@ -73,6 +73,17 @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 (                                           \
+        AST2500_HW_STRAP1_DEFAULTS |                                    \
+        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
+        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
+        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
+        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
+        SCU_H_PLL_BYPASS_EN |                                           \
+        SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
+        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -287,6 +298,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -378,6 +418,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
     }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
+    }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",
Signature · 1 line
1.8.3.1
#4 lore raw

Hello Adriana,

Quoted 7 lines · Adriana Kobylak

From: Adriana Kobylak <[email protected]>

The Swift board is an OpenPOWER system hosting POWER processors. Add support for their BMC including the I2C devices as found on HW.

I pushed this patch in my tree for the moment as the patchset :

"aspeed: machine extensions and fixes" patchwork.ozlabs.org/cover/1105343/

still needs some more reviews.

Thanks,

C.

Quoted 80 lines
---
 hw/arm/aspeed.c | 50 ++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 50 insertions(+)
hw/arm/aspeed.c +50 -0
index 33070a6..7fd0e0c 100644
@@ -73,6 +73,17 @@ struct AspeedBoardState {
         SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
         SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
 
+/* Swift hardware value: 0xF11AD206 */
+#define SWIFT_BMC_HW_STRAP1 (                                           \
+        AST2500_HW_STRAP1_DEFAULTS |                                    \
+        SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE |                     \
+        SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE |                        \
+        SCU_AST2500_HW_STRAP_UART_DEBUG |                               \
+        SCU_AST2500_HW_STRAP_DDR4_ENABLE |                              \
+        SCU_H_PLL_BYPASS_EN |                                           \
+        SCU_AST2500_HW_STRAP_ACPI_ENABLE |                              \
+        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_MASTER))
+
 /* Witherspoon hardware value: 0xF10AD216 (but use romulus definition) */
 #define WITHERSPOON_BMC_HW_STRAP1 ROMULUS_BMC_HW_STRAP1
 
@@ -287,6 +298,35 @@ static void romulus_bmc_i2c_init(AspeedBoardState *bmc)
     i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 11), "ds1338", 0x32);
 }
 
+static void swift_bmc_i2c_init(AspeedBoardState *bmc)
+{
+    AspeedSoCState *soc = &bmc->soc;
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 3), "pca9552", 0x60);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "tmp105", 0x48);
+    /* The swift board expects a pca9551 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 7), "pca9552", 0x60);
+
+    /* The swift board expects an Epson RX8900 RTC but a ds1338 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "ds1338", 0x32);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 8), "pca9552", 0x60);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 9), "pca9552", 0x74);
+
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "tmp423", 0x4c);
+    /* The swift board expects a pca9539 but a pca9552 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 10), "pca9552",
+                     0x74);
+
+    /* The swift board expects a TMP275 but a TMP105 is compatible */
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x48);
+    i2c_create_slave(aspeed_i2c_get_bus(DEVICE(&soc->i2c), 12), "tmp105", 0x4a);
+}
+
 static void witherspoon_bmc_i2c_init(AspeedBoardState *bmc)
 {
     AspeedSoCState *soc = &bmc->soc;
@@ -378,6 +418,16 @@ static const AspeedBoardConfig aspeed_boards[] = {
         .i2c_init  = romulus_bmc_i2c_init,
         .ram       = 512 * MiB,
     }, {
+        .name      = MACHINE_TYPE_NAME("swift-bmc"),
+        .desc      = "OpenPOWER Swift BMC (ARM1176)",
+        .soc_name  = "ast2500-a1",
+        .hw_strap1 = SWIFT_BMC_HW_STRAP1,
+        .fmc_model = "mx66l1g45g",
+        .spi_model = "mx66l1g45g",
+        .num_cs    = 2,
+        .i2c_init  = swift_bmc_i2c_init,
+        .ram       = 512 * MiB,
+    }, {
         .name      = MACHINE_TYPE_NAME("witherspoon-bmc"),
         .desc      = "OpenPOWER Witherspoon BMC (ARM1176)",
         .soc_name  = "ast2500-a1",