Fix the inconsistency between the code and the manual page of mkfs.xfs
PATCH 1/1 Fix the inconsistency between the code and the manual page of mkfs.xfs
From: Alvin Zheng <[email protected]>
Signed-off-by Alvin Zheng <[email protected]>
--- man/man8/mkfs.xfs.8 | 12 +----------- 1 file changed, 1 insertion(+), 11 deletions(-)
man/man8/mkfs.xfs.8 +1 -11
@@ -115,9 +115,7 @@ When specifying parameters in units of sectors or filesystem blocks, the .B \-s option or the .B \-b -option first needs to be added to the command line. -Failure to specify the size of the units will result in illegal value errors -when parameters are quantified in those units. +option can be used to specify the size of the sector or block. If the size of the block or sector is not specified, the default size (block: 4KiB, sector: 512B) will be used. .PP Many feature options allow an optional argument of 0 or 1, to explicitly disable or enable the functionality.
@@ -136,10 +134,6 @@ The filesystem block size is specified with a in bytes. The default value is 4096 bytes (4 KiB), the minimum is 512, and the maximum is 65536 (64 KiB). .IP -To specify any options on the command line in units of filesystem blocks, this -option must be specified first so that the filesystem block size is -applied consistently to all options. -.IP Although .B mkfs.xfs will accept any of these values and create a valid filesystem,
@@ -894,10 +888,6 @@ is 512 bytes. The minimum value for sector size is .I sector_size must be a power of 2 size and cannot be made larger than the filesystem block size. -.IP -To specify any options on the command line in units of sectors, this -option must be specified first so that the sector size is -applied consistently to all options. .RE .TP .BI \-L " label"
Signature · 1 line
1.8.3.1