Skip to contentSkip to conversation

board: mediatek: Add pumpkin board support

PATCH Superseded Fabien Parent 2 participants 2 messages Jun 14, 2019 1 message not in the archive

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): [email protected]

#1 lore raw

PATCH v2 1/1 board: mediatek: Add pumpkin board support

+u-boot at lists.denx.de

Quoted 382 lines · Fabien Parent

The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC.

---

V2:
* Set MTK_BROM_HEADER_INFO to 'emmc' since we only support eMMC right now.

---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/mt8516-pumpkin.dts    | 110 +++++++++++++++++++++++++++++
 arch/arm/mach-mediatek/Kconfig     |   1 +
 board/mediatek/pumpkin/Kconfig     |  13 ++++
 board/mediatek/pumpkin/MAINTAINERS |   6 ++
 board/mediatek/pumpkin/Makefile    |   3 +
 board/mediatek/pumpkin/pumpkin.c   |  14 ++++
 configs/pumpkin_defconfig          |  64 +++++++++++++++++
 include/configs/pumpkin.h          |  58 +++++++++++++++
 9 files changed, 271 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/mt8516-pumpkin.dts
 create mode 100644 board/mediatek/pumpkin/Kconfig
 create mode 100644 board/mediatek/pumpkin/MAINTAINERS
 create mode 100644 board/mediatek/pumpkin/Makefile
 create mode 100644 board/mediatek/pumpkin/pumpkin.c
 create mode 100644 configs/pumpkin_defconfig
 create mode 100644 include/configs/pumpkin.h
arch/arm/dts/Makefile +2 -1
index 528fb909d5..1f66172530 100644
@@ -766,7 +766,8 @@ dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
 
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
        mt7623n-bananapi-bpi-r2.dtb \
-       mt7629-rfb.dtb
+       mt7629-rfb.dtb \
+       mt8516-pumpkin.dtb
 
 dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
arch/arm/dts/mt8516-pumpkin.dts new file +110 -0
new file mode 100644
index 0000000000..cd43c1f5e3
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2019 BayLibre SAS.
+ * Author: Fabien Parent <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8516.dtsi"
+
+/ {
+       model = "Pumpkin MT8516";
+
+       chosen {
+               stdout-path = &uart0;
+       };
+
+       memory at 40000000 {
+               device_type = "memory";
+               reg = <0x40000000 0x20000000>;
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+
+               /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+               bl31_secmon_reserved: secmon at 43000000 {
+                       no-map;
+                       reg = <0 0x43000000 0 0x20000>;
+               };
+       };
+
+       reg_1p8v: regulator-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_default>;
+       bus-width = <4>;
+       max-frequency = <200000000>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       cap-mmc-hw-reset;
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_1p8v>;
+       non-removable;
+       status = "okay";
+};
+
+&pinctrl {
+       mmc0_pins_default: mmc0default {
+               mux {
+                       function = "msdc";
+                       groups =  "msdc0";
+               };
+
+               conf-cmd-data {
+                       pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+                              "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+                              "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               conf-clk {
+                       pins = "MSDC0_CLK";
+                       bias-pull-down;
+               };
+
+               conf-rst {
+                       pins = "MSDC0_RSTB";
+                       bias-pull-up;
+               };
+       };
+
+       uart0_pins: uart0 {
+               mux {
+                       function = "uart";
+                       groups = "uart0_0_rxd_txd";
+               };
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
arch/arm/mach-mediatek/Kconfig +1 -0
index b5e91d4a7d..a7d594f48a 100644
@@ -45,5 +45,6 @@ endchoice
 
 source "board/mediatek/mt7623/Kconfig"
 source "board/mediatek/mt7629/Kconfig"
+source "board/mediatek/pumpkin/Kconfig"
 
 endif
board/mediatek/pumpkin/Kconfig new file +13 -0
new file mode 100644
index 0000000000..fb81fa8906
@@ -0,0 +1,13 @@
+if TARGET_MT8516
+
+config SYS_BOARD
+       default "pumpkin"
+
+config SYS_CONFIG_NAME
+       default "pumpkin"
+
+config MTK_BROM_HEADER_INFO
+       string
+       default "media=nor"
+
+endif
board/mediatek/pumpkin/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..16beadc027
@@ -0,0 +1,6 @@
+Pumpkin
+M:     Fabien Parent <[email protected]>
+S:     Maintained
+F:     board/mediatek/pumpkin
+F:     include/configs/pumpkin.h
+F:     configs/pumpkin_defconfig
board/mediatek/pumpkin/Makefile new file +3 -0
new file mode 100644
index 0000000000..75fce4a393
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:     GPL-2.0
+
+obj-y += pumpkin.o
board/mediatek/pumpkin/pumpkin.c new file +14 -0
new file mode 100644
index 0000000000..c20e91c9e6
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 BayLibre SAS
+ */
+
+#include <common.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+       return 0;
+}
configs/pumpkin_defconfig new file +64 -0
new file mode 100644
index 0000000000..06e2b8f5b9
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_SYS_TEXT_BASE=0x4C000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_TARGET_MT8516=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0x11005000
+CONFIG_DEBUG_UART_CLOCK=26000000
+# CONFIG_PSCI_RESET is not set
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_MEMORY is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_BLOCK_CACHE is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_DEFAULT_DEVICE_TREE="mt8516-pumpkin"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+# CONFIG_NET is not set
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_DM_GPIO=y
+# CONFIG_INPUT is not set
+CONFIG_DM_MMC=y
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_MMC_MTK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MT8516=y
+CONFIG_RAM=y
+CONFIG_BAUDRATE=921600
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_MTK=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MTK_SERIAL=y
+CONFIG_WDT=y
+CONFIG_WDT_MTK=y
+# CONFIG_EFI_LOADER is not set
include/configs/pumpkin.h new file +58 -1
new file mode 100644
index 0000000000..b81e587983
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Pumpkin board
+ *
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Fabien Parent <[email protected]
+ */
+
+#ifndef __PUMPKIN_H
+#define __PUMPKIN_H
+
+#include <linux/sizes.h>
+
+#define CONFIG_ENV_SIZE                        SZ_4K
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN          SZ_4M
+
+#define CONFIG_CPU_ARMV8
+#define COUNTER_FREQUENCY              13000000
+
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    -4
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_COM1                0x11005000
+#define CONFIG_SYS_NS16550_CLK         26000000
+
+#define CONFIG_SYS_UBOOT_START         CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE + SZ_2M - \
+                                                GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+
+/* Environment settings */
+#include <config_distro_bootcmd.h>
+
+#define MMCBOOT \
+       "mmcdev=0\0" \
+       "kernel_partition=2\0" \
+       "rootfs_partition=3\0" \
+       "mmc_discover_partition=" \
+               "part start mmc ${mmcdev} ${kernel_partition} kernel_part_addr;" \
+               "part size mmc ${mmcdev} ${kernel_partition} kernel_part_size;\0" \
+       "mmcboot=" \
+               "mmc dev ${mmcdev};" \
+               "run mmc_discover_partition;" \
+               "mmc read ${kerneladdr} ${kernel_part_addr} ${kernel_part_size};" \
+               "setenv bootargs ${bootargs} root=/dev/mmcblk${mmcdev}p${rootfs_partition} rootwait; " \
+               "bootm ${kerneladdr}; \0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "kerneladdr=0x4A000000\0" \
+       "bootargs= " \
+               "console=tty0 console=ttyS0,921600n1 " \
+               "earlycon=uart8250,mmio32,0x11005000\0 " \
+       MMCBOOT \
+       "bootcmd=run mmcboot;\0"
+
+#endif
--

2.20.1

#2 lore raw

PATCH v2 1/1 board: mediatek: Add pumpkin board support

Quoted 235 lines · Fabien Parent

+u-boot at lists.denx.de

Quoted 232 lines · Fabien Parent

The pumpkin board is made by Gossamer Engineering and is using a MediaTek SoC. The board currently comes in two available version:
MT8516 SoC and MT8167 SoC.
The board provides the following IOs: eMMC, NAND, SD card, USB type-A, Ethernet, Wi-Fi, Bluetooth, Audio (jack out, 2 PDM port, 1 analog in), serial over USB, and an expansion header.

Additionally there is a HDMI port, DSI port, and camera port only on the MT8167 version of the board.

The board can be powered by battery and/or via a USB Type-C port and is using a PMIC MT6392.

The eMMC and NAND are sharing pins and cannot be used together.

This commit is adding the basic boot support for the Pumpkin MT8516 board on the eMMC.

---

V2:
* Set MTK_BROM_HEADER_INFO to 'emmc' since we only support eMMC right now.

---
 arch/arm/dts/Makefile              |   3 +-
 arch/arm/dts/mt8516-pumpkin.dts    | 110 +++++++++++++++++++++++++++++
 arch/arm/mach-mediatek/Kconfig     |   1 +
 board/mediatek/pumpkin/Kconfig     |  13 ++++
 board/mediatek/pumpkin/MAINTAINERS |   6 ++
 board/mediatek/pumpkin/Makefile    |   3 +
 board/mediatek/pumpkin/pumpkin.c   |  14 ++++
 configs/pumpkin_defconfig          |  64 +++++++++++++++++
 include/configs/pumpkin.h          |  58 +++++++++++++++
 9 files changed, 271 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/mt8516-pumpkin.dts
 create mode 100644 board/mediatek/pumpkin/Kconfig
 create mode 100644 board/mediatek/pumpkin/MAINTAINERS
 create mode 100644 board/mediatek/pumpkin/Makefile
 create mode 100644 board/mediatek/pumpkin/pumpkin.c
 create mode 100644 configs/pumpkin_defconfig
 create mode 100644 include/configs/pumpkin.h
arch/arm/dts/Makefile +2 -1
index 528fb909d5..1f66172530 100644
@@ -766,7 +766,8 @@ dtb-$(CONFIG_SOC_K3_AM6) += k3-am654-base-board.dtb k3-am654-r5-base-board.dtb
 
 dtb-$(CONFIG_ARCH_MEDIATEK) += \
        mt7623n-bananapi-bpi-r2.dtb \
-       mt7629-rfb.dtb
+       mt7629-rfb.dtb \
+       mt8516-pumpkin.dtb
 
 dtb-$(CONFIG_TARGET_GE_BX50V3) += imx6q-bx50v3.dtb
 dtb-$(CONFIG_TARGET_MX53PPD) += imx53-ppd.dtb
arch/arm/dts/mt8516-pumpkin.dts new file +110 -0
new file mode 100644
index 0000000000..cd43c1f5e3
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2019 BayLibre SAS.
+ * Author: Fabien Parent <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <config.h>
+#include "mt8516.dtsi"
+
+/ {
+       model = "Pumpkin MT8516";
+
+       chosen {
+               stdout-path = &uart0;
+       };
+
+       memory at 40000000 {
+               device_type = "memory";
+               reg = <0x40000000 0x20000000>;
+       };
+
+       reserved-memory {
+               #address-cells = <2>;
+               #size-cells = <2>;
+
+               /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+               bl31_secmon_reserved: secmon at 43000000 {
+                       no-map;
+                       reg = <0 0x43000000 0 0x20000>;
+               };
+       };
+
+       reg_1p8v: regulator-1p8v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-1.8V";
+               regulator-min-microvolt = <1800000>;
+               regulator-max-microvolt = <1800000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+
+       reg_3p3v: regulator-3p3v {
+               compatible = "regulator-fixed";
+               regulator-name = "fixed-3.3V";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+               regulator-boot-on;
+               regulator-always-on;
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_default>;
+       bus-width = <4>;
+       max-frequency = <200000000>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       cap-mmc-hw-reset;
+       vmmc-supply = <&reg_3p3v>;
+       vqmmc-supply = <&reg_1p8v>;
+       non-removable;
+       status = "okay";
+};
+
+&pinctrl {
+       mmc0_pins_default: mmc0default {
+               mux {
+                       function = "msdc";
+                       groups =  "msdc0";
+               };
+
+               conf-cmd-data {
+                       pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
+                              "MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
+                              "MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
+                       input-enable;
+                       bias-pull-up;
+               };
+
+               conf-clk {
+                       pins = "MSDC0_CLK";
+                       bias-pull-down;
+               };
+
+               conf-rst {
+                       pins = "MSDC0_RSTB";
+                       bias-pull-up;
+               };
+       };
+
+       uart0_pins: uart0 {
+               mux {
+                       function = "uart";
+                       groups = "uart0_0_rxd_txd";
+               };
+       };
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins>;
+       status = "okay";
+};
+
+&watchdog {
+       status = "okay";
+};
arch/arm/mach-mediatek/Kconfig +1 -0
index b5e91d4a7d..a7d594f48a 100644
@@ -45,5 +45,6 @@ endchoice
 
 source "board/mediatek/mt7623/Kconfig"
 source "board/mediatek/mt7629/Kconfig"
+source "board/mediatek/pumpkin/Kconfig"
 
 endif
board/mediatek/pumpkin/Kconfig new file +13 -0
new file mode 100644
index 0000000000..fb81fa8906
@@ -0,0 +1,13 @@
+if TARGET_MT8516
+
+config SYS_BOARD
+       default "pumpkin"
+
+config SYS_CONFIG_NAME
+       default "pumpkin"
+
+config MTK_BROM_HEADER_INFO
+       string
+       default "media=nor"
+
+endif
board/mediatek/pumpkin/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000000..16beadc027
@@ -0,0 +1,6 @@
+Pumpkin
+M:     Fabien Parent <[email protected]>
+S:     Maintained
+F:     board/mediatek/pumpkin
+F:     include/configs/pumpkin.h
+F:     configs/pumpkin_defconfig
board/mediatek/pumpkin/Makefile new file +3 -0
new file mode 100644
index 0000000000..75fce4a393
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier:     GPL-2.0
+
+obj-y += pumpkin.o
board/mediatek/pumpkin/pumpkin.c new file +1 -0
new file mode 100644
index 0000000000..c20e91c9e6
@@ -0,0 +1,14 @@
+// SPDX-License-Identifier: GPL-2.0
Quoted 8 lines

board/mediatek/pumpkin/pumpkin.c line 9

Quoted 8 lines
board/mediatek/pumpkin/pumpkin.c new file +8 -0
+/*
+ * Copyright (C) 2019 BayLibre SAS
+ */
+
+#include <common.h>
+#include <dm.h>
+
+DECLARE_GLOBAL_DATA_PTR;

I don't see anywhere to use gd so suggest to drop it.

Quoted 141 lines
Quoted 141 lines
board/mediatek/pumpkin/pumpkin.c new file +4 -0
+int board_init(void)
+{
+       return 0;
+}
configs/pumpkin_defconfig new file +64 -0
new file mode 100644
index 0000000000..06e2b8f5b9
@@ -0,0 +1,64 @@
+CONFIG_ARM=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_SYS_TEXT_BASE=0x4C000000
+CONFIG_SYS_MALLOC_F_LEN=0x4000
+CONFIG_TARGET_MT8516=y
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0x11005000
+CONFIG_DEBUG_UART_CLOCK=26000000
+# CONFIG_PSCI_RESET is not set
+CONFIG_DEBUG_UART=y
+CONFIG_FIT=y
+# CONFIG_FIT_ENABLE_SHA256_SUPPORT is not set
+# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
+CONFIG_DEFAULT_FDT_FILE="mt8516-pumpkin"
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_HUSH_PARSER=y
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_BOOTD is not set
+# CONFIG_CMD_BOOTI is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_GO is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_ENV_EXISTS is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_MEMORY is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPT=y
+# CONFIG_RANDOM_UUID is not set
+# CONFIG_CMD_LOADB is not set
+# CONFIG_CMD_LOADS is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+# CONFIG_CMD_ITEST is not set
+# CONFIG_CMD_SOURCE is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_BLOCK_CACHE is not set
+# CONFIG_CMD_MISC is not set
+CONFIG_DEFAULT_DEVICE_TREE="mt8516-pumpkin"
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+# CONFIG_NET is not set
+CONFIG_SPL_DM_SEQ_ALIAS=y
+CONFIG_CLK=y
+CONFIG_DM_GPIO=y
+# CONFIG_INPUT is not set
+CONFIG_DM_MMC=y
+# CONFIG_MMC_QUIRKS is not set
+CONFIG_MMC_MTK=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_MT8516=y
+CONFIG_RAM=y
+CONFIG_BAUDRATE=921600
+CONFIG_DM_SERIAL=y
+CONFIG_DEBUG_UART_MTK=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MTK_SERIAL=y
+CONFIG_WDT=y
+CONFIG_WDT_MTK=y
+# CONFIG_EFI_LOADER is not set
include/configs/pumpkin.h new file +58 -1
new file mode 100644
index 0000000000..b81e587983
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration for Pumpkin board
+ *
+ * Copyright (C) 2019 BayLibre, SAS
+ * Author: Fabien Parent <[email protected]
+ */
+
+#ifndef __PUMPKIN_H
+#define __PUMPKIN_H
+
+#include <linux/sizes.h>
+
+#define CONFIG_ENV_SIZE                        SZ_4K
+#define CONFIG_SYS_LOAD_ADDR           CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MALLOC_LEN          SZ_4M
+
+#define CONFIG_CPU_ARMV8
+#define COUNTER_FREQUENCY              13000000
+
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE    -4
+#define CONFIG_SYS_NS16550_MEM32
+#define CONFIG_SYS_NS16550_COM1                0x11005000
+#define CONFIG_SYS_NS16550_CLK         26000000
+
+#define CONFIG_SYS_UBOOT_START         CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_INIT_SP_ADDR                (CONFIG_SYS_TEXT_BASE + SZ_2M - \
+                                                GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+
+/* Environment settings */
+#include <config_distro_bootcmd.h>
+
+#define MMCBOOT \
+       "mmcdev=0\0" \
+       "kernel_partition=2\0" \
+       "rootfs_partition=3\0" \
+       "mmc_discover_partition=" \
+               "part start mmc ${mmcdev} ${kernel_partition} kernel_part_addr;" \
+               "part size mmc ${mmcdev} ${kernel_partition} kernel_part_size;\0" \
+       "mmcboot=" \
+               "mmc dev ${mmcdev};" \
+               "run mmc_discover_partition;" \
+               "mmc read ${kerneladdr} ${kernel_part_addr} ${kernel_part_size};" \
+               "setenv bootargs ${bootargs} root=/dev/mmcblk${mmcdev}p${rootfs_partition} rootwait; " \
+               "bootm ${kerneladdr}; \0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+       "kerneladdr=0x4A000000\0" \
+       "bootargs= " \
+               "console=tty0 console=ttyS0,921600n1 " \
+               "earlycon=uart8250,mmio32,0x11005000\0 " \
+       MMCBOOT \
+       "bootcmd=run mmcboot;\0"
+
+#endif
--

2.20.1