Skip to contentSkip to conversation

tipc: simplify stale link failure criteria

PATCH Applied Jon Maloy 2 participants 2 messages Jun 25, 2019

Subsystems (3)
lore
Share & tools
lore

Jon Maloy

author
#0 lore raw

PATCH 1/1 tipc: simplify stale link failure criteria

In commit a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission") we made link retransmission failure events dependent on the link tolerance, and not only of the number of failed retransmission attempts, as we did earlier. This works well. However, keeping the original, additional criteria of 99 failed retransmissions is now redundant, and may in some cases lead to failure detection times in the order of minutes instead of the expected 1.5 sec link tolerance value.

We now remove this criteria altogether.

---
 net/tipc/link.c | 9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)
net/tipc/link.c +2 -7
index bcfb0a4..af50b53 100644
@@ -107,7 +107,6 @@ struct tipc_stats {
  * @backlogq: queue for messages waiting to be sent
  * @snt_nxt: next sequence number to use for outbound messages
  * @prev_from: sequence number of most previous retransmission request
- * @stale_cnt: counter for number of identical retransmit attempts
  * @stale_limit: time when repeated identical retransmits must force link reset
  * @ackers: # of peers that needs to ack each packet before it can be released
  * @acked: # last packet acked by a certain peer. Used for broadcast.
@@ -167,7 +166,6 @@ struct tipc_link {
 	u16 snd_nxt;
 	u16 prev_from;
 	u16 window;
-	u16 stale_cnt;
 	unsigned long stale_limit;
 
 	/* Reception */
@@ -910,7 +908,6 @@ void tipc_link_reset(struct tipc_link *l)
 	l->acked = 0;
 	l->silent_intv_cnt = 0;
 	l->rst_cnt = 0;
-	l->stale_cnt = 0;
 	l->bc_peer_is_up = false;
 	memset(&l->mon_state, 0, sizeof(l->mon_state));
 	tipc_link_reset_stats(l);
@@ -1068,8 +1065,7 @@ static bool link_retransmit_failure(struct tipc_link *l, struct tipc_link *r,
 	if (r->prev_from != from) {
 		r->prev_from = from;
 		r->stale_limit = jiffies + msecs_to_jiffies(r->tolerance);
-		r->stale_cnt = 0;
-	} else if (++r->stale_cnt > 99 && time_after(jiffies, r->stale_limit)) {
+	} else if (time_after(jiffies, r->stale_limit)) {
 		pr_warn("Retransmission failure on link <%s>\n", l->name);
 		link_print(l, "State of link ");
 		pr_info("Failed msg: usr %u, typ %u, len %u, err %u\n",
@@ -1515,7 +1511,6 @@ int tipc_link_rcv(struct tipc_link *l, struct sk_buff *skb,
 
 		/* Forward queues and wake up waiting users */
 		if (likely(tipc_link_release_pkts(l, msg_ack(hdr)))) {
-			l->stale_cnt = 0;
 			tipc_link_advance_backlog(l, xmitq);
 			if (unlikely(!skb_queue_empty(&l->wakeupq)))
 				link_prepare_wakeup(l);
@@ -2584,7 +2579,7 @@ int tipc_link_dump(struct tipc_link *l, u16 dqueues, char *buf)
 	i += scnprintf(buf + i, sz - i, " %u", l->silent_intv_cnt);
 	i += scnprintf(buf + i, sz - i, " %u", l->rst_cnt);
 	i += scnprintf(buf + i, sz - i, " %u", l->prev_from);
-	i += scnprintf(buf + i, sz - i, " %u", l->stale_cnt);
+	i += scnprintf(buf + i, sz - i, " %u", 0);
 	i += scnprintf(buf + i, sz - i, " %u", l->acked);
 
 	list = &l->transmq;
Signature · 1 line
2.1.4
maintainer Applied
#1 lore raw

From: Jon Maloy <[email protected]>
Date: Tue, 25 Jun 2019 17:36:43 +0200

Quoted 9 lines

In commit a4dc70d46cf1 ("tipc: extend link reset criteria for stale packet retransmission") we made link retransmission failure events dependent on the link tolerance, and not only of the number of failed retransmission attempts, as we did earlier. This works well. However, keeping the original, additional criteria of 99 failed retransmissions is now redundant, and may in some cases lead to failure detection times in the order of minutes instead of the expected 1.5 sec link tolerance value.

Quoted 4 lines

We now remove this criteria altogether.

Applied.