Skip to contentSkip to conversation

patch "usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()" added to usb-next

PATCH [email protected] 1 participant 1 message Jul 3, 2019

Subsystems (3)
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-next branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will also be merged in the next major kernel release during the merge window.

If you have any questions about this process, please let me know.

From dfc4fdebc5d62ac4e2fe5428e59b273675515fb2 Mon Sep 17 00:00:00 2001
From: Martin Blumenstingl <[email protected]>
Date: Thu, 20 Jun 2019 19:50:22 +0200
Subject: usb: dwc2: use a longer AHB idle timeout in dwc2_core_reset()

Use a 10000us AHB idle timeout in dwc2_core_reset() and make it consistent with the other "wait for AHB master IDLE state" ocurrences.

This fixes a problem for me where dwc2 would not want to initialize when updating to 4.19 on a MIPS Lantiq VRX200 SoC. dwc2 worked fine with 4.14.
Testing on my board shows that it takes 180us until AHB master IDLE state is signalled. The very old vendor driver for this SoC (ifxhcd) used a 1 second timeout.
Use the same timeout that is used everywhere when polling for GRSTCTL_AHBIDLE instead of using a timeout that "works for one board" (180us in my case) to have consistent behavior across the dwc2 driver.

---
 drivers/usb/dwc2/core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/usb/dwc2/core.c +1 -1
index 8b499d643461..8e41d70fd298 100644
@@ -531,7 +531,7 @@ int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
 	}
 
 	/* Wait for AHB master IDLE state */
-	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 50)) {
+	if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
 		dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
 			 __func__);
 		return -EBUSY;
Signature · 1 line
2.22.0