test_verifier #13 fails on arm64: "retval 65507 != -29"
Subsystems (7)
PATCH RESEND 1/1 test_verifier #13 fails on arm64: "retval 65507 != -29"
Full failure message:
...
#13/p valid read map access into a read-only array 2 FAIL retval 65507 != -29 verification time 14 usec
stack depth 8
processed 14 insns (limit 1000000) max_states_per_insn 0 total_states 2 peak_states 2 mark_read 1
...
this on 5.2-rc6, arm64 defconfig + CONFIG_BPF* enabled (full config here [1]). Any idea what could be wrong?
1: http://paste.ubuntu.com/p/tXXFGCPwbp/
Signature · 2 lines
bye, p.
Quoted 10 lines · Paolo Pisati
Full failure message:
...
#13/p valid read map access into a read-only array 2 FAIL retval 65507 != -29 verification time 14 usec
stack depth 8
processed 14 insns (limit 1000000)max_states_per_insn0total_states2peak_states2mark_read1
...
Quoted 2 lines
this on 5.2-rc6, arm64 defconfig + CONFIG_BPF* enabled (full config here [1]). Any idea what could be wrong?
Below is the test case.
{
"valid read map access into a read-only array 2",
.insns = {
BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
BPF_LD_MAP_FD(BPF_REG_1, 0),
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_map_lookup_elem),
BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6),
BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
BPF_MOV64_IMM(BPF_REG_2, 4),
BPF_MOV64_IMM(BPF_REG_3, 0),
BPF_MOV64_IMM(BPF_REG_4, 0),
BPF_MOV64_IMM(BPF_REG_5, 0),
BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
BPF_FUNC_csum_diff),
BPF_EXIT_INSN(),
},
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
.fixup_map_array_ro = { 3 },
.result = ACCEPT,
.retval = -29,
},The issue may be with helper bpf_csum_diff().
Maybe you can check bpf_csum_diff() helper return value to confirm and take a further look at bpf_csum_diff implementations between x64 and amd64.
Quoted 28 lines · Yonghong Song
Below is the test case.
{ "valid read map access into a read-only array 2", .insns = { BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_2, 4), BPF_MOV64_IMM(BPF_REG_3, 0), BPF_MOV64_IMM(BPF_REG_4, 0), BPF_MOV64_IMM(BPF_REG_5, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_csum_diff), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, .fixup_map_array_ro = { 3 }, .result = ACCEPT, .retval = -29, },
Quoted 4 lines
The issue may be with helper
bpf_csum_diff().
Maybe you can checkbpf_csum_diff()helper return value to confirm and take a further look atbpf_csum_diffimplementations between x64 and amd64.
Indeed, the different result comes from csum_partial() or, more precisely, do_csum().
x86-64 uses an asm optimized version residing in arch/x86/lib/csum-partial_64.c, while the generic version is in lib/checksum.c.
I replaced the x86-64 csum_partial() / do_csum() code, with the one in lib/checksum.c and by doing so i reproduced the same error on x86-64 (thus, it's not an arch dependent issue).
I added some debugging to bpf_csum_diff(), and here are the results with different checksum implementation code:
http://paste.debian.net/1091037/
lib/checksum.c:
...
[ 206.084537] ____bpf_csum_diff from_size: 1 to_size: 0 [ 206.085274] ____bpf_csum_diff from[0]: 28 [ 206.085276] ____bpf_csum_diff diff[0]: 4294967267 [ 206.085277] ____bpf_csum_diff diff_size: 4 seed: 0
After csum_partial() call:
[ 206.086059] ____bpf_csum_diff csum: 65507 - 0xffe3
arch/x86/lib/csum-partial_64.c
...
[ 40.467308] ____bpf_csum_diff from_size: 1 to_size: 0 [ 40.468141] ____bpf_csum_diff from[0]: 28 [ 40.468143] ____bpf_csum_diff diff[0]: 4294967267 [ 40.468144] ____bpf_csum_diff diff_size: 4 seed: 0
After csum_partial() call:
[ 40.468937] ____bpf_csum_diff csum: -29 - 0xffffffe3
One thing that i noticed, x86-64 csum-partial_64.c::do_csum() doesn't reduce the calculated checksum to 16bit before returning it (unless the input value is odd - *):
arch/x86/lib/csum-partial_64.c::do_csum()
...
if (unlikely(odd)) {
result = from32to16(result);
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
}
return result;
}contrary to all the other do_csum() implementations (that i could understand):
lib/checksum.c::do_csum()
arch/alpha/lib/checksum.c::do_csum()
arch/parisc/lib/checksum.c::do_csum()
Apparently even ia64 does the folding (arch/ia64/lib/do_csum.S see a comment right before .do_csum_exit:), and arch/c6x/lib/csum_64plus.S too (see arch/c6x/lib/csum_64plus.S).
Funnily enough, if i change do_csum() for x86-64, folding the checksum to 16 bit (following all the other implementations):
arch/x86/lib/csum-partial_64.c +0 -0
@@ -112,8 +112,8 @@ static unsigned do_csum(const unsigned char *buff, unsigned
len)
if (len & 1)
result += *buff;
result = add32_with_carry(result>>32, result & 0xffffffff);
+ result = from32to16(result);
if (unlikely(odd)) {
- result = from32to16(result);
result = ((result >> 8) & 0xff) | ((result & 0xff) << 8);
}
return result;then, the x86-64 result match the others: 65507 or 0xffe3.
As a last attempt, i tried running the bpf test_verifier on an armhf platform, and i got a completely different number:
[ 57.667999] ____bpf_csum_diff from_size: 1 to_size: 0 [ 57.668016] ____bpf_csum_diff from[0]: 28 [ 57.668028] ____bpf_csum_diff diff[0]: 4294967267 [ 57.668039] ____bpf_csum_diff diff_size: 4 seed: 0
After csum_partial() call:
[ 57.668052] ____bpf_csum_diff::2002 csum: 131042 - 0x0001ffe2
Not sure what to make of these number, but i have a question: whats is the correct checksum of the memory chunk passed to csum_partial()? Is it really -29?
Because, at least 2 other implementations i tested (the arm assembly code and the c implementation in lib/checksum.c) computes a different value, so either there's a bug in checksum calcution (2 out of 3???), or we are interpreting the returned value from csum_partial() somehow wrongly.
*: originally, the x86-64 did the 16bit folding, but the logic was changed to what we have today during a big rewrite - search for:
commit 3ef076bb685a461bbaff37a1f06010fc4d7ce733
Author: Andi Kleen <[email protected]> Date: Fri Jun 13 04:27:34 2003 -0700
[PATCH] x86-64 merge
in this historic repo:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Signature · 2 lines
bye, p.
cc Andi Kleen re: refactoring, do you have any insight here?
Quoted 30 lines · Paolo Pisati
Quoted 28 lines · Yonghong Song
Below is the test case.
{ "valid read map access into a read-only array 2", .insns = { BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_2, 4), BPF_MOV64_IMM(BPF_REG_3, 0), BPF_MOV64_IMM(BPF_REG_4, 0), BPF_MOV64_IMM(BPF_REG_5, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_csum_diff), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, .fixup_map_array_ro = { 3 }, .result = ACCEPT, .retval = -29, },
Quoted 7 lines
Quoted 4 lines
The issue may be with helper
bpf_csum_diff().
Maybe you can checkbpf_csum_diff()helper return value to confirm and take a further look atbpf_csum_diffimplementations between x64 and amd64.Indeed, the different result comes from
csum_partial()or, more precisely,do_csum().
I assume this is checksum used for ipv4 header checksum ([0]), right? It's defined as "16-bit one's complement of the one's complement sum of all 16-bit words", so at the end it has to be folded into 16-bit anyways.
Reading csum_partial/csum_fold, seems like after calculation of checksum (so-called unfolded checksum), it is supposed to be passed into csum_fold() to convert it into 16-bit one and invert.
So maybe that's what is missing from bpf_csum_diff()? Though I've never used it and don't even know exactly what is its purpose, so might be (and probably am) totally wrong here (e.g., it might be that BPF app is supposed to do that or something).
[0] https://en.wikipedia.org/wiki/IPv4_header_checksum
Quoted 112 lines
x86-64 uses an asm optimized version residing in
arch/x86/lib/csum-partial_64.c, while the generic version is inlib/checksum.c.I replaced the x86-64
csum_partial()/do_csum()code, with the one inlib/checksum.cand by doing so i reproduced the same error on x86-64 (thus, it's not an arch dependent issue).I added some debugging to
bpf_csum_diff(), and here are the results with different checksum implementation code:http://paste.debian.net/1091037/
lib/checksum.c:
...[ 206.084537] ____bpf_csum_diff from_size: 1 to_size: 0 [ 206.085274] ____bpf_csum_diff from[0]: 28 [ 206.085276] ____bpf_csum_diff diff[0]: 4294967267 [ 206.085277] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 206.086059] ____bpf_csum_diff csum: 65507 - 0xffe3
arch/x86/lib/csum-partial_64.c
...[ 40.467308] ____bpf_csum_diff from_size: 1 to_size: 0 [ 40.468141] ____bpf_csum_diff from[0]: 28 [ 40.468143] ____bpf_csum_diff diff[0]: 4294967267 [ 40.468144] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 40.468937] ____bpf_csum_diff csum: -29 - 0xffffffe3One thing that i noticed, x86-64 csum-partial_64.c::do_csum() doesn't reduce the calculated checksum to 16bit before returning it (unless the input value is odd - *):
arch/x86/lib/csum-partial_64.c::do_csum()
... if (unlikely(odd)) { result = from32to16(result); result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); } return result; }contrary to all the other
do_csum()implementations (that i could understand):lib/checksum.c::do_csum()
arch/alpha/lib/checksum.c::do_csum()
arch/parisc/lib/checksum.c::do_csum()Apparently even ia64 does the folding (
arch/ia64/lib/do_csum.Ssee a comment right before .do_csum_exit:), andarch/c6x/lib/csum_64plus.Stoo (seearch/c6x/lib/csum_64plus.S).Funnily enough, if i change
do_csum()for x86-64, folding the checksum to 16 bit (following all the other implementations):arch/x86/lib/csum-partial_64.c +1
-1@@ -112,8 +112,8 @@ static unsigned do_csum(const unsigned char *buff, unsigned len)if (len &1 ) result += *buff; result =add32_with_carry (result>>32 , result &0xffffffff ); + result =from32to16 (result);if (unlikely (odd)) { - result =from32to16 (result); result = ((result >>8 ) &0xff ) | ((result &0xff ) <<8 ); }return result;then, the x86-64 result match the others: 65507 or
0xffe3.As a last attempt, i tried running the bpf
test_verifieron an armhf platform, and i got a completely different number:[ 57.667999] ____bpf_csum_diff from_size: 1 to_size: 0 [ 57.668016] ____bpf_csum_diff from[0]: 28 [ 57.668028] ____bpf_csum_diff diff[0]: 4294967267 [ 57.668039] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 57.668052] ____bpf_csum_diff::2002 csum: 131042 - 0x0001ffe2Not sure what to make of these number, but i have a question: whats is the correct checksum of the memory chunk passed to
csum_partial()? Is it really -29?Because, at least 2 other implementations i tested (the arm assembly code and the c implementation in
lib/checksum.c) computes a different value, so either there's a bug in checksum calcution (2 out of 3???), or we are interpreting the returned value fromcsum_partial()somehow wrongly.*: originally, the x86-64 did the 16bit folding, but the logic was changed to what we have today during a big rewrite - search for:
commit
3ef076bb685a461bbaff37a1f06010fc4d7ce733Author: Andi Kleen <[email protected]> Date: Fri Jun 13 04:27:34 2003 -0700[PATCH] x86-64 mergein this historic repo:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
--
bye,
p.
Quoted 2 lines · Andrii Nakryiko
cc Andi Kleen re: refactoring, do you have any insight here?
OK, let's try again...
Quoted 168 lines · Paolo Pisati
Quoted 30 lines · Yonghong Song
Quoted 28 lines
Below is the test case.
{ "valid read map access into a read-only array 2", .insns = { BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), BPF_LD_MAP_FD(BPF_REG_1, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 6), BPF_MOV64_REG(BPF_REG_1, BPF_REG_0), BPF_MOV64_IMM(BPF_REG_2, 4), BPF_MOV64_IMM(BPF_REG_3, 0), BPF_MOV64_IMM(BPF_REG_4, 0), BPF_MOV64_IMM(BPF_REG_5, 0), BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_csum_diff), BPF_EXIT_INSN(), }, .prog_type = BPF_PROG_TYPE_SCHED_CLS, .fixup_map_array_ro = { 3 }, .result = ACCEPT, .retval = -29, },Quoted 7 lines
Quoted 4 lines
The issue may be with helper
bpf_csum_diff().
Maybe you can checkbpf_csum_diff()helper return value to confirm and take a further look atbpf_csum_diffimplementations between x64 and amd64.Indeed, the different result comes from
csum_partial()or, more precisely,do_csum().I assume this is checksum used for ipv4 header checksum ([0]), right? It's defined as "16-bit one's complement of the one's complement sum of all 16-bit words", so at the end it has to be folded into 16-bit anyways.
Reading csum_partial/csum_fold, seems like after calculation of checksum (so-called unfolded checksum), it is supposed to be passed into
csum_fold()to convert it into 16-bit one and invert.So maybe that's what is missing from
bpf_csum_diff()? Though I've never used it and don't even know exactly what is its purpose, so might be (and probably am) totally wrong here (e.g., it might be that BPF app is supposed to do that or something).[0] https://en.wikipedia.org/wiki/IPv4_header_checksum
Quoted 112 lines
x86-64 uses an asm optimized version residing in
arch/x86/lib/csum-partial_64.c, while the generic version is inlib/checksum.c.I replaced the x86-64
csum_partial()/do_csum()code, with the one inlib/checksum.cand by doing so i reproduced the same error on x86-64 (thus, it's not an arch dependent issue).I added some debugging to
bpf_csum_diff(), and here are the results with different checksum implementation code:http://paste.debian.net/1091037/
lib/checksum.c:
...[ 206.084537] ____bpf_csum_diff from_size: 1 to_size: 0 [ 206.085274] ____bpf_csum_diff from[0]: 28 [ 206.085276] ____bpf_csum_diff diff[0]: 4294967267 [ 206.085277] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 206.086059] ____bpf_csum_diff csum: 65507 - 0xffe3
arch/x86/lib/csum-partial_64.c
...[ 40.467308] ____bpf_csum_diff from_size: 1 to_size: 0 [ 40.468141] ____bpf_csum_diff from[0]: 28 [ 40.468143] ____bpf_csum_diff diff[0]: 4294967267 [ 40.468144] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 40.468937] ____bpf_csum_diff csum: -29 - 0xffffffe3One thing that i noticed, x86-64 csum-partial_64.c::do_csum() doesn't reduce the calculated checksum to 16bit before returning it (unless the input value is odd - *):
arch/x86/lib/csum-partial_64.c::do_csum()
... if (unlikely(odd)) { result = from32to16(result); result = ((result >> 8) & 0xff) | ((result & 0xff) << 8); } return result; }contrary to all the other
do_csum()implementations (that i could understand):lib/checksum.c::do_csum()
arch/alpha/lib/checksum.c::do_csum()
arch/parisc/lib/checksum.c::do_csum()Apparently even ia64 does the folding (
arch/ia64/lib/do_csum.Ssee a comment right before .do_csum_exit:), andarch/c6x/lib/csum_64plus.Stoo (seearch/c6x/lib/csum_64plus.S).Funnily enough, if i change
do_csum()for x86-64, folding the checksum to 16 bit (following all the other implementations):arch/x86/lib/csum-partial_64.c +1
-1@@ -112,8 +112,8 @@ static unsigned do_csum(const unsigned char *buff, unsigned len)if (len &1 ) result += *buff; result =add32_with_carry (result>>32 , result &0xffffffff ); + result =from32to16 (result);if (unlikely (odd)) { - result =from32to16 (result); result = ((result >>8 ) &0xff ) | ((result &0xff ) <<8 ); }return result;then, the x86-64 result match the others: 65507 or
0xffe3.As a last attempt, i tried running the bpf
test_verifieron an armhf platform, and i got a completely different number:[ 57.667999] ____bpf_csum_diff from_size: 1 to_size: 0 [ 57.668016] ____bpf_csum_diff from[0]: 28 [ 57.668028] ____bpf_csum_diff diff[0]: 4294967267 [ 57.668039] ____bpf_csum_diff diff_size: 4 seed: 0After
csum_partial()call:[ 57.668052] ____bpf_csum_diff::2002 csum: 131042 - 0x0001ffe2Not sure what to make of these number, but i have a question: whats is the correct checksum of the memory chunk passed to
csum_partial()? Is it really -29?Because, at least 2 other implementations i tested (the arm assembly code and the c implementation in
lib/checksum.c) computes a different value, so either there's a bug in checksum calcution (2 out of 3???), or we are interpreting the returned value fromcsum_partial()somehow wrongly.*: originally, the x86-64 did the 16bit folding, but the logic was changed to what we have today during a big rewrite - search for:
commit
3ef076bb685a461bbaff37a1f06010fc4d7ce733Author: Andi Kleen <[email protected]> Date: Fri Jun 13 04:27:34 2003 -0700[PATCH] x86-64 mergein this historic repo:
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
--
bye,
p.
Quoted 3 lines
Quoted 3 lines
Reading csum_partial/csum_fold, seems like after calculation of checksum (so-called unfolded checksum), it is supposed to be passed into
csum_fold()to convert it into 16-bit one and invert.
Yes, you always need to fold at the end.
The low level code does fold sometimes, but not always.
-Andi
cover Fold checksum at the end of bpf_csum_diff and fix
From: Paolo Pisati <[email protected]>
After applying patch 0001, all checksum implementations i could test (x86-64, arm64 and arm), now agree on the return value.
Patch 0002 fix the expected return value for test #13: i did the calculation manually, and it correspond.
Unfortunately, after applying patch 0001, other test cases now fail in test_verifier:
$ sudo ./tools/testing/selftests/bpf/test_verifier ... #417/p helper access to variable memory: size = 0 allowed on NULL (ARG_PTR_TO_MEM_OR_NULL) FAIL retval 65535 != 0 #419/p helper access to variable memory: size = 0 allowed on != NULL stack pointer (ARG_PTR_TO_MEM_OR_NULL) FAIL retval 65535 != 0 #423/p helper access to variable memory: size possible = 0 allowed on != NULL packet pointer (ARG_PTR_TO_MEM_OR_NULL) FAIL retval 65535 != 0 ... Summary: 1500 PASSED, 0 SKIPPED, 3 FAILED
And there are probably other fallouts in other selftests - someone familiar should take a look before applying these patches.
Paolo Pisati (2):
bpf: bpf_csum_diff: fold the checksum before returning the
value
bpf, selftest: fix checksum value for test #13
net/core/filter.c | 2 +- tools/testing/selftests/bpf/verifier/array_access.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
Signature · 1 line
2.17.1
PATCH 1/2 bpf: bpf_csum_diff: fold the checksum before returning the value
From: Paolo Pisati <[email protected]>
With this change, bpf_csum_diff behave homogeneously among different checksum calculation code / csum_partial() (tested on x86-64, arm64 and arm).
--- net/core/filter.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
net/core/filter.c +1 -1
@@ -1990,7 +1990,7 @@ BPF_CALL_5(bpf_csum_diff, __be32 *, from, u32, from_size,for (i =0 ; i < to_size /sizeof (__be32); i++, j++) sp->diff[j] = to[i]; -return csum_partial (sp->diff, diff_size, seed); +return csum_fold (csum_partial (sp->diff, diff_size, seed)); }static const struct bpf_func_proto bpf_csum_diff_proto = {
Signature · 1 line
2.17.1
PATCH 2/2 bpf, selftest: fix checksum value for test #13
In reply to Paolo PisatiFrom: Paolo Pisati <[email protected]>
--- tools/testing/selftests/bpf/verifier/array_access.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
tools/testing/selftests/bpf/verifier/array_access.c +1 -1
@@ -255,7 +255,7 @@ .prog_type = BPF_PROG_TYPE_SCHED_CLS, .fixup_map_array_ro = { 3 }, .result = ACCEPT, - .retval =-29 , + .retval =28 , }, { "invalid write map access into a read-only array 1",
Signature · 1 line
2.17.1
Re: [PATCH 2/2] bpf, selftest: fix checksum value for test #13
Quoted 3 lines · Paolo Pisati
From: Paolo Pisati <[email protected]>
Please include description, in addition to subject.
Also, when submitting patches, please add bpf or bpf-next (e.g., [PATCH bpf 2/2] to indicate which tree it's supposed to go into). For this one it's probably bpf.
Quoted 21 lines
Signed-off-by Paolo Pisati <[email protected]>--- tools/testing/selftests/bpf/verifier/array_access.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)tools/testing/selftests/bpf/verifier/array_access.c +1
-2@@ -255,7 +255,7 @@ .prog_type = BPF_PROG_TYPE_SCHED_CLS, .fixup_map_array_ro = { 3 }, .result = ACCEPT, - .retval =-29 , + .retval =28 , }, { "invalid write map access into a read-only array 1", --2.17.1