doc: release note for the IPsec library
PATCH 1/1 doc: release note for the IPsec library
Update release notes for changes to the IPsec library.
--- doc/guides/rel_notes/release_19_08.rst | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
doc/guides/rel_notes/release_19_08.rst +15 -1
@@ -224,6 +224,20 @@ New Features Added multiple cores feature to compression perf tool application. +* **Updated the IPsec library.** + + Added missing functionality for IPsec RFC's (4301, 403, 7321) compliance. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for SA lifetime (soft/hard limit bytes/time). + + * Expanded IV generation code to make it complain with particular algorithm + requirements (CBC, GCM, etc.). + + * Added support for RFC 4301, section 5.1.2. Header Construction for Tunnel + Mode. + Removed Items -------------
@@ -384,7 +398,7 @@ The libraries prepended with a plus sign were incremented in this version. librte_gso.so.1 librte_hash.so.2 librte_ip_frag.so.1 - librte_ipsec.so.1 + + librte_ipsec.so.1 librte_jobstats.so.1 librte_kni.so.2 librte_kvargs.so.1
Signature · 1 line
2.7.4
PATCH v2 1/1 doc: release note for the IPsec library
Update release notes for changes to the IPsec library.
---
changes in v2:
revised content.
doc/guides/rel_notes/release_19_08.rst | 8 ++++++++ 1 file changed, 8 insertions(+)
doc/guides/rel_notes/release_19_08.rst +8 -0
@@ -224,6 +224,14 @@ New Features Added multiple cores feature to compression perf tool application. +* **Updated the IPsec library.** + + Added missing functionality to ``librte_ipsec``. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for packets that consist of multiple segments. + Removed Items -------------
Signature · 1 line
2.7.4
PATCH v3 1/1 doc: release note for the IPsec library
Update release notes for changes to the IPsec library.
---
changes in v3:
revised content
doc/guides/rel_notes/release_19_08.rst | 8 ++++++++ 1 file changed, 8 insertions(+)
doc/guides/rel_notes/release_19_08.rst +8 -0
@@ -224,6 +224,14 @@ New Features Added multiple cores feature to compression perf tool application. +* **Updated the IPsec library.** + + Added the following functionality to ``librte_ipsec``. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for packets that consist of multiple segments. + Removed Items -------------
Signature · 1 line
2.7.4
Quoted 30 lines
-----Original Message-----
From: Iremonger, Bernard
Sent: Thursday, July 25, 2019 3:39 PM
To: [email protected]; Ananyev, Konstantin <[email protected]>; [email protected]; Mcnamara, John <[email protected]>
Cc: Iremonger, Bernard <[email protected]>
Subject: [PATCH v3] doc: release note for the IPsec libraryUpdate release notes for changes to the IPsec library.
Signed-off-by Bernard Iremonger <[email protected]>---
changes in v3:
revised contentdoc/guides/rel_notes/release_19_08.rst | 8 ++++++++ 1 file changed, 8 insertions(+)doc/guides/rel_notes/release_19_08.rst +2
-0@@ -224,6 +224,14 @@ New Features Added multiple cores feature to compression perf tool application. +* **Updated the IPsec library.** +
doc/guides/rel_notes/release_19_08.rst New Features
Quoted 10 lines
doc/guides/rel_notes/release_19_08.rst +6
-1+ Added the following functionality to ``librte_ipsec``. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for packets that consist of multiple segments. + Removed Items ------------- --
Quoted 1 line
2.7.4
Hi Bernard,
Quoted 19 lines
Update release notes for changes to the IPsec library.
Signed-off-by Bernard Iremonger <[email protected]>---
changes in v3:
revised contentdoc/guides/rel_notes/release_19_08.rst | 8 ++++++++ 1 file changed, 8 insertions(+)doc/guides/rel_notes/release_19_08.rst +0
-0@@ -224,6 +224,14 @@ New Features Added multiple cores feature to compression perf tool application.
doc/guides/rel_notes/release_19_08.rst New Features · line 235
Quoted 10 lines
doc/guides/rel_notes/release_19_08.rst +8
-0+* **Updated the IPsec library.** + + Added the following functionality to ``librte_ipsec``. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for packets that consist of multiple segments. +
Ipsec library changes are already there in the release note. Could you please consolidate all changes in ipsec lib in a single bullet.
Also the ipsec-secgw application changes can also be there in that single bullet. As the features are same for ipsec lib and ipsec application.
So I would say, we can combine the two commits in a single bullet already there in the release note for header reconstruction.
http://patches.dpdk.org/patch/57122/
http://patches.dpdk.org/patch/57124/
-Akhil
Hi Akhil,
Quoted 46 lines
-----Original Message-----
From: Akhil Goyal [mailto:[email protected]]
Sent: Friday, July 26, 2019 11:27 AM
To: Iremonger, Bernard <[email protected]>; [email protected]; Ananyev, Konstantin <[email protected]>; Mcnamara, John <[email protected]>
Subject: RE: [PATCH v3] doc: release note for the IPsec libraryHi Bernard,
Quoted 19 lines
Update release notes for changes to the IPsec library.
Signed-off-by Bernard Iremonger <[email protected]>---
changes in v3:
revised contentdoc/guides/rel_notes/release_19_08.rst | 8 ++++++++ 1 file changed, 8 insertions(+)doc/guides/rel_notes/release_19_08.rst +0
-0@@ -224,6 +224,14 @@ New Features Added multiple cores feature to compression perf tool application.doc/guides/rel_notes/release_19_08.rst New Features · line 235
Quoted 10 lines
doc/guides/rel_notes/release_19_08.rst +8
-0+* **Updated the IPsec library.** + + Added the following functionality to ``librte_ipsec``. + + * Added support for transport mode with IPv6 extension headers. + + * Added support for packets that consist of multiple segments. +Ipsec library changes are already there in the release note. Could you please consolidate all changes in ipsec lib in a single bullet.
Also the ipsec-secgw application changes can also be there in that single bullet. As the features are same for ipsec lib and ipsec application.
Quoted 7 lines
So I would say, we can combine the two commits in a single bullet already there in the release note for header reconstruction.
http://patches.dpdk.org/patch/57122/
http://patches.dpdk.org/patch/57124/-Akhil
I will update existing bullet with info in patches 57122 and 57124.
Regards,
Bernard.
PATCH v4 1/1 doc: release note for the IPsec library and application
In reply to Bernard IremongerUpdate release notes for changes to the IPsec library.
Update release notes for changes to the IPsec Security Gateway application
--- doc/guides/rel_notes/release_19_08.rst | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)
doc/guides/rel_notes/release_19_08.rst +13 -4
@@ -200,11 +200,20 @@ New Features handshake between two separate hosts and can share local memory for peer host to directly access. -* **Updated IPSec library Header Reconstruction.** +* **Updated IPSec library and IPsec Security Gateway application.** - Updated the IPSec library with ECN and DSCP field header reconstruction - feature followed by RFC4301. The IPSec-secgw sample application is also - updated to support this feature by default. + Added the following functionality to ``librte_ipsec`` and ``ipsec-secgw`` + + * Updated ``librte_ipsec`` with ECN and DSCP field header reconstruction + feature followed by RFC4301. + + * Added support for transport mode with IPv6 extension headers to + ``librte_ipsec``. + + * Added support for packets that consist of multiple segments to + ``librte_ipsec``. + + * Updated the ``ipsec-secgw`` sample application to support these features. * **Updated telemetry library for global metrics support.**
Signature · 1 line
2.7.4
Re: [dpdk-dev] [PATCH v4] doc: release note for the IPsec library and application
Quoted 4 lines
Update release notes for changes to the IPsec library.
Update release notes for changes to the IPsec Security Gateway application
Description and the release note updates use redundant words which can be avoided. It could be something like
"Update release notes for recently supported features in ipsec lib and application."
Quoted 12 lines
Signed-off-by Bernard Iremonger <[email protected]>--- doc/guides/rel_notes/release_19_08.rst | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)doc/guides/rel_notes/release_19_08.rst +0
-0
doc/guides/rel_notes/release_19_08.rst New Features · line 205
Quoted 10 lines
doc/guides/rel_notes/release_19_08.rst +2
-4@@ -200,11 +200,20 @@ New Features handshake between two separate hosts and can share local memory for peer host to directly access. -* **Updated IPSec library Header Reconstruction.** +* **Updated IPSec library and IPsec Security Gateway application.** - Updated the IPSec library with ECN and DSCP field header reconstruction - feature followed by RFC4301. The IPSec-secgw sample application is also - updated to support this feature by default. + Added the following functionality to ``librte_ipsec`` and ``ipsec-secgw``
Added following features to ``librte_ipsec``. Corresponding changes are also added in ``ipsec-secgw`` sample application.
doc/guides/rel_notes/release_19_08.rst New Features · line 208
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Updated ``librte_ipsec`` with ECN and DSCP field header reconstruction + feature followed by RFC4301.
* ECN and DSCP field header reconstruction as per RFC4301
doc/guides/rel_notes/release_19_08.rst New Features · line 211
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Added support for transport mode with IPv6 extension headers to + ``librte_ipsec``.
* Transport mode with IPv6 extension headers
doc/guides/rel_notes/release_19_08.rst New Features · line 214
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Added support for packets that consist of multiple segments to + ``librte_ipsec``.
* Support packets with multiple segments.
doc/guides/rel_notes/release_19_08.rst New Features · line 216
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +2
-0+ + * Updated the ``ipsec-secgw`` sample application to support these features.
This bullet can be removed.
doc/guides/rel_notes/release_19_08.rst New Features · line 219
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +0
-0* **Updated telemetry library for global metrics support.**
-Akhil
Re: [dpdk-dev] [PATCH v4] doc: release note for the IPsec library and application
Hi Akhil,
Quoted 12 lines
-----Original Message-----
From: Akhil Goyal [mailto:[email protected]]
Sent: Friday, July 26, 2019 1:36 PM
To: Iremonger, Bernard <[email protected]>; [email protected]; Ananyev, Konstantin <[email protected]>; Mcnamara, John <[email protected]>; Zhang, Roy Fan <[email protected]>
Subject: RE: [PATCH v4] doc: release note for the IPsec library and applicationQuoted 3 lines
Update release notes for changes to the IPsec library. Update release notes for changes to the IPsec Security Gateway
Quoted 8 lines
application
Description and the release note updates use redundant words which can be avoided.
It could be something like"Update release notes for recently supported features in ipsec lib and application."
Ok, will change.
Quoted 18 lines
doc/guides/rel_notes/release_19_08.rst New Features · line 200
Quoted 12 lines
Signed-off-by Bernard Iremonger <[email protected]>--- doc/guides/rel_notes/release_19_08.rst | 17 +++++++++++++---- 1 file changed, 13 insertions(+), 4 deletions(-)doc/guides/rel_notes/release_19_08.rst +0
-0@@ -200,11 +200,20 @@ New Features handshake between two separate hosts and can share local memory forpeer
Quoted 5 lines
doc/guides/rel_notes/release_19_08.rst +1
-1host to directly access. -* **Updated IPSec library Header Reconstruction.** +* **Updated IPSec library and IPsec Security Gateway application.**
Quoted 7 lines
doc/guides/rel_notes/release_19_08.rst New Features · line 205
Quoted 4 lines
doc/guides/rel_notes/release_19_08.rst +1
-3- Updated the IPSec library with ECN and DSCP field header reconstruction - feature followed by RFC4301. The IPSec-secgw sample application is also - updated to support this feature by default. + Added the following functionality to ``librte_ipsec`` and ``ipsec-secgw``Added following features to ``librte_ipsec``. Corresponding changes are also added in ``ipsec-secgw`` sample application.
Ok, will change.
Quoted 11 lines
doc/guides/rel_notes/release_19_08.rst New Features · line 208
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Updated ``librte_ipsec`` with ECN and DSCP field header reconstruction + feature followed by RFC4301.* ECN and DSCP field header reconstruction as per RFC4301
doc/guides/rel_notes/release_19_08.rst New Features · line 211
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Added support for transport mode with IPv6 extension headers to + ``librte_ipsec``.* Transport mode with IPv6 extension headers
Ok, will change
Quoted 6 lines
doc/guides/rel_notes/release_19_08.rst New Features · line 214
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +3
-0+ + * Added support for packets that consist of multiple segments to + ``librte_ipsec``.* Support packets with multiple segments.
Ok, will change.
Quoted 6 lines
doc/guides/rel_notes/release_19_08.rst New Features
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +2
-0+ + * Updated the ``ipsec-secgw`` sample application to support thesefeatures.
This bullet can be removed.
Ok, will remove.
Quoted 5 lines
doc/guides/rel_notes/release_19_08.rst New Features · line 219
Quoted 3 lines
doc/guides/rel_notes/release_19_08.rst +0
-0* **Updated telemetry library for global metrics support.**-Akhil
Regards,
Bernard.
PATCH v5 1/1 doc: release note for the IPsec library and application
In reply to Bernard IremongerUpdate release notes for recently supported features in IPsec library and IPsec Security Gateway application.
--- doc/guides/rel_notes/release_19_08.rst | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
doc/guides/rel_notes/release_19_08.rst +9 -4
@@ -200,11 +200,16 @@ New Features handshake between two separate hosts and can share local memory for peer host to directly access. -* **Updated IPSec library Header Reconstruction.** +* **Updated IPSec library and IPsec Security Gateway application.** - Updated the IPSec library with ECN and DSCP field header reconstruction - feature followed by RFC4301. The IPSec-secgw sample application is also - updated to support this feature by default. + Added the following features to ``librte_ipsec``. Corresponding changes are + also added in ``ipsec-secgw`` sample application + + * ECN and DSCP field header reconstruction as per RFC4301. + + * Transport mode with IPv6 extension headers. + + * Support packets with multiple segments. * **Updated telemetry library for global metrics support.**
Signature · 1 line
2.7.4
Re: [dpdk-dev] [PATCH v5] doc: release note for the IPsec library and application
Quoted 10 lines
Update release notes for recently supported features in IPsec library and IPsec Security Gateway application.
Signed-off-by Bernard Iremonger <[email protected]>--- doc/guides/rel_notes/release_19_08.rst | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
Akhil Goyal
AppliedRe: [dpdk-dev] [PATCH v5] doc: release note for the IPsec library and application
Quoted 11 lines
Quoted 10 lines
Update release notes for recently supported features in IPsec library and IPsec Security Gateway application.
Signed-off-by Bernard Iremonger <[email protected]>--- doc/guides/rel_notes/release_19_08.rst | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)Acked-by Akhil Goyal <[email protected]>
Applied to dpdk-next-crypto
Thanks.