improve late microcode loading
v8 cover improve late microcode loading
Changes in version 8:
- block #NMI handling during microcode loading (Patch 16)
- Don't assume that all CPUs in the system have loaded a same ucode. So when parsing a blob, we attempt to save a patch as long as it matches with current cpu signature regardless of the revision of the patch. And also for loading, we only require the patch to be loaded isn't old than the cached one.
- store an update after the first successful loading on a CPU
- remove the patch that calls wbinvd() unconditionally before microcode loading. It is under internal discussion.
- divide two big patches into several patches to improve readability.
Sergey, could you help to test this series on an AMD machine? Regarding changes to AMD side, I didn't do any test for them due to lack of hardware. At least, two basic tests are needed:
* do a microcode update after system bootup
* don't bring all pCPUs up at bootup by specifying maxcpus option in xen command line and then do a microcode update and online all offlined CPUs via 'xen-hptool'.
The intention of this series is to make the late microcode loading more reliable by rendezvousing all cpus in stop_machine context. This idea comes from Ashok. I am porting his linux patch to Xen (see patch 14 and 15 for more details).
This series includes below changes:
1. Patch 1: always read microcode revision at boot time
2. Patch 2: an userspace tool for late microcode update
3. Patch 3-13: introduce a global microcode cache and some cleanup
4. Patch 14: synchronize late microcode loading
5. Patch 15: support parallel microcodes update on different cores
6. Patch 16: block #NMI handling during microcode loading
Currently, late microcode loading does a lot of things including parsing microcode blob, checking the signature/revision and performing update. Putting all of them into stop_machine context is a bad idea because of complexity (one issue I observed is memory allocation triggered one assertion in stop_machine context). To simplify the load process, parsing microcode is moved out of the load process. Remaining parts of load process is put to stop_machine context.
Previous change log:
Changes in version 7:
- cache one microcode update rather than a list of it. Assuming that all CPUs (including those will be plugged in later) in the system have the same signature, one update matches with one CPU should match with others. Thus, one update is enough for microcode updating during CPU hot-plug and resuming.
- To handle load failure, microcode update is cached after it is applied to avoid a broken update overriding a validated one. Unvalidated microcode updates are passed by arguments rather than another global variable, where this series slightly differs from Roger's suggestion in:
https://lists.xen.org/archives/html/xen-devel/2019-03/msg00776.html
- incorporate Sergey's patch (patch 10) to fix a bug: we maintain a variable to reflect current microcode revision. But in some cases, this variable isn't initialized during system boot time, which results in falsely reporting that processor is susceptible to some known vulnerabilities.
- fix issues reported by Sergey:
https://lists.xenproject.org/archives/html/xen-devel/2019-03/msg00901.html
- Responses to Sergey/Roger/Wei/Ashok's other comments.
Major changes in version 6:
- run wbinvd before updating microcode (patch 10)
- add an userspace tool for late microcode update (patch 1)
- scale time to wait by the number of remaining CPUs to respond
- remove 'cpu' parameters from some related callbacks and functins
- save an ucode patch only if its supported CPU is allowed to mix with current cpu.
Changes in version 5:
- support parallel microcode updates for all cores (see patch 8)
- Address Roger's comments on the last version.
Chao Gao (15):
misc/xen-ucode: Upload a microcode blob to the hypervisor microcode/intel: extend microcode_update_match() microcode/amd: fix memory leak
microcode/amd: distinguish old and mismatched ucode in
microcode_fits()
microcode: introduce a global cache of ucode patch
microcode: clean up microcode_resume_cpu
microcode: remove struct ucode_cpu_info
microcode: remove pointless 'cpu' parameter microcode/amd: call svm_host_osvw_init() in common code
microcode: pass a patch pointer to apply_microcode()
microcode: split out apply_microcode() from cpu_request_microcode()
microcode: unify loading update during CPU resuming and AP wakeup x86/microcode: Synchronize late microcode loading
microcode: remove microcode_update_lock
microcode: block #NMI handling when loading an ucode
Sergey Dyasli (1):
x86/microcode: always collect_cpu_info() during boot
tools/libxc/include/xenctrl.h | 1 + tools/libxc/xc_misc.c | 23 ++ tools/misc/Makefile | 4 + tools/misc/xen-ucode.c | 73 +++++++ xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/apic.c | 2 +- xen/arch/x86/microcode.c | 464 +++++++++++++++++++++++++++++++--------- xen/arch/x86/microcode_amd.c | 282 ++++++++++++------------ xen/arch/x86/microcode_intel.c | 204 ++++++++++-------- xen/arch/x86/smpboot.c | 5 +- xen/arch/x86/spec_ctrl.c | 2 +- xen/include/asm-x86/microcode.h | 43 ++-- xen/include/asm-x86/processor.h | 4 +- 13 files changed, 740 insertions(+), 369 deletions(-) create mode 100644 tools/misc/xen-ucode.c
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 1/16 misc/xen-ucode: Upload a microcode blob to the hypervisor
This patch provides a tool for late microcode update.
---
Changes in v8:
- Correct two coding style issues. No functional changes.
Changes in v7:
- introduce xc_microcode_update() rather than xc_platform_op()
- avoid creating bounce buffer twice
- rename xenmicrocode to xen-ucode, following naming tradition of other tools there.
--- tools/libxc/include/xenctrl.h | 1 + tools/libxc/xc_misc.c | 23 ++++++++++++++ tools/misc/Makefile | 4 +++ tools/misc/xen-ucode.c | 73 +++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 101 insertions(+) create mode 100644 tools/misc/xen-ucode.c
tools/libxc/include/xenctrl.h +1 -0
@@ -1244,6 +1244,7 @@ typedef uint32_t xc_node_to_node_dist_t;int xc_physinfo (xc_interface *xch,xc_physinfo_t *info);int xc_cputopoinfo (xc_interface *xch,unsigned *max_cpus,xc_cputopo_t *cputopo); +int xc_microcode_update (xc_interface *xch,const void *buf,size_t len);int xc_numainfo (xc_interface *xch,unsigned *max_nodes,xc_meminfo_t *meminfo,uint32_t *distance); int xc_pcitopoinfo(xc_interface *xch, unsigned num_devs,
tools/libxc/xc_misc.c +23 -0
@@ -226,6 +226,29 @@ int xc_physinfo(xc_interface *xch,return 0 ; } +int xc_microcode_update (xc_interface *xch,const void *buf,size_t len) +{ +int ret; +DECLARE_PLATFORM_OP ; + DECLARE_HYPERCALL_BUFFER(struct xenpf_microcode_update, uc); + + uc =xc_hypercall_buffer_alloc (xch, uc, len); +if ( uc ==NULL ) +return -1 ; + +memcpy (uc, buf, len); + + platform_op.cmd = XENPF_microcode_update; + platform_op.u.microcode.length = len; +set_xen_guest_handle (platform_op.u.microcode.data, uc); + + ret =do_platform_op (xch, &platform_op); + +xc_hypercall_buffer_free (xch, uc); + +return ret; +} +int xc_cputopoinfo (xc_interface *xch,unsigned *max_cpus,xc_cputopo_t *cputopo) {
tools/misc/Makefile +4 -0
@@ -22,6 +22,7 @@ INSTALL_SBIN-$(CONFIG_X86) += xen-hvmcrash INSTALL_SBIN-$(CONFIG_X86) += xen-hvmctx INSTALL_SBIN-$(CONFIG_X86) += xen-lowmemd INSTALL_SBIN-$(CONFIG_X86) += xen-mfndump +INSTALL_SBIN-$(CONFIG_X86) += xen-ucode INSTALL_SBIN += xencov INSTALL_SBIN += xenlockprof INSTALL_SBIN += xenperf
@@ -113,4 +114,7 @@ xen-lowmemd: xen-lowmemd.o xencov: xencov.o $(CC) $(LDFLAGS) -o $@ $< $(LDLIBS_libxenctrl) $(APPEND_LDFLAGS) +xen-ucode: xen-ucode.o + $(CC) $(LDFLAGS) -o $@ $< $(LDLIBS_libxenctrl) $(APPEND_LDFLAGS) + -include $(DEPS_INCLUDE)
tools/misc/xen-ucode.c new file +73 -0
73 lines not on this page · raw message
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 2/16 x86/microcode: always collect_cpu_info() during boot
In reply to Chao GaoFrom: Sergey Dyasli <[email protected]>
Currently cpu_sig struct is not updated during boot if no microcode blob is specified by "ucode=[<interger>| scan]".
It will result in cpu_sig.rev being 0 which affects APIC's check_deadline_errata() and retpoline_safe() functions.
Fix this by getting ucode revision early during boot and SMP bring up. While at it, protect early_microcode_update_cpu() for cases when microcode_ops is NULL.
---
Changes in v8:
- refine description.
- Jan asked if we could drop the call of collect_cpu_info() from microcode_update_cpu(). In theory, yes, but should be placed later in the series. Because there is an error path (__microcode_fini_cpu()) in which cpu_sig.rev is cleared, it is hard to make things right in all cases without removing the error path (which is done by following patches). Considering it is a good fix, put it here so that it can be merged without following patches.
--- xen/arch/x86/microcode.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)
xen/arch/x86/microcode.c +12 -0
@@ -383,10 +383,15 @@ static struct notifier_block microcode_percpu_nfb = {int __init early_microcode_update_cpu (bool start_update) { +unsigned int cpu =smp_processor_id (); +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);int rc =0 ;void *data =NULL ;size_t len; +if ( !microcode_ops ) +return -ENOSYS ; +if ( ucode_blob.size ) { len = ucode_blob.size;
@@ -397,6 +402,9 @@ int __init early_microcode_update_cpu(bool start_update) len = ucode_mod.mod_end; data =bootstrap_map (&ucode_mod); } + + microcode_ops->collect_cpu_info (cpu, &uci->cpu_sig); +if ( data ) {if ( start_update && microcode_ops->start_update )
@@ -413,6 +421,8 @@ int __init early_microcode_update_cpu(bool start_update)int __init early_microcode_init (void ) { +unsigned int cpu =smp_processor_id (); +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);int rc; rc =microcode_init_intel ();
@@ -425,6 +435,8 @@ int __init early_microcode_init(void)if ( microcode_ops ) { + microcode_ops->collect_cpu_info (cpu, &uci->cpu_sig); +if ( ucode_mod.mod_end || ucode_blob.size ) rc =early_microcode_update_cpu (true);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 02/16] x86/microcode: always collect_cpu_info() during boot
Quoted 14 lines · Chao Gao
From: Sergey Dyasli <[email protected]>
Currently
cpu_sigstruct is not updated during boot if no microcode blob is specified by "ucode=[<interger>| scan]".It will result in cpu_sig.rev being 0 which affects APIC's
check_deadline_errata()andretpoline_safe()functions.Fix this by getting ucode revision early during boot and SMP bring up. While at it, protect
early_microcode_update_cpu()for cases whenmicrocode_opsis NULL.Signed-off-by Sergey Dyasli <[email protected]>Signed-off-by Chao Gao <[email protected]>
Quoted 10 lines
---
Changes in v8:
- refine description.
- Jan asked if we could drop the call ofcollect_cpu_info()frommicrocode_update_cpu(). In theory, yes, but should be placed later in the series. Because there is an error path (__microcode_fini_cpu()) in which cpu_sig.rev is cleared, it is hard to make things right in all cases without removing the error path (which is done by following patches). Considering it is a good fix, put it here so that it can be merged without following patches.
Ok.
really want backporting.
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 02/16] x86/microcode: always collect_cpu_info() during boot
In reply to Chao GaoQuoted 4 lines · Chao Gao
xen/arch/x86/microcode.c +0
-0@@ -383,10 +383,15 @@ static struct notifier_block microcode_percpu_nfb = {
xen/arch/x86/microcode.c static struct notifier_block microcode_percpu_nfb = { · line 393
Quoted 10 lines
xen/arch/x86/microcode.c +4
-0int __init early_microcode_update_cpu (bool start_update) { +unsigned int cpu =smp_processor_id (); +struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);int rc =0 ;void *data =NULL ;size_t len; +if ( !microcode_ops ) +return -ENOSYS ;
For posterity (realizing the patch has gone in already) - I'm not convinced this should be an error condition, but the error produced here is being ignored anyway afaics (i.e. the function could as well return void). In no case is this an appropriate use of ENOSYS: This isn't even on a hypercall path.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 3/16 microcode/intel: extend microcode_update_match()
In reply to Chao Gaoto a more generic function. Then, this function can compare two given microcodes' signature/revision as well. Comparing two microcodes is used to update the global microcode cache (introduced by the later patches in this series) when a new microcode is given.
Note that enum microcode_match_result will be used in common code (aka microcode.c), it has been placed in the common header.
---
Changes in v8:
- make sure enough room for an extended header and signature array
Changes in v6:
- eliminate unnecessary type casting in microcode_update_match
- check if a patch has an extend header
Changes in v5:
- constify the extended_signature
- use named enum type for the return value of microcode_update_match
--- xen/arch/x86/microcode_intel.c | 57 ++++++++++++++++++++++------------------- xen/include/asm-x86/microcode.h | 6 +++++ 2 files changed, 36 insertions(+), 27 deletions(-)
xen/arch/x86/microcode_intel.c +30 -27
@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); - -return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; + + ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* +* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ; + +return MIS_UCODE ; }static int microcode_sanity_check (void *mc)
@@ -243,31 +264,13 @@ static int get_matching_microcode(const void *mc, unsigned int cpu) {struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);const struct microcode_header_intel *mc_header = mc; -const struct extended_sigtable *ext_header;unsigned long total_size =get_totalsize (mc_header); -int ext_sigcount, i; -struct extended_signature *ext_sig;void *new_mc; -if (microcode_update_match (cpu, mc_header, - mc_header->sig, mc_header->pf) ) - goto find; - -if ( total_size <= (get_datasize (mc_header) +MC_HEADER_SIZE ) ) +if (microcode_update_match (mc, uci->cpu_sig.sig, uci->cpu_sig.pf, + uci->cpu_sig.rev) !=NEW_UCODE )return 0 ; - ext_header = mc +get_datasize (mc_header) +MC_HEADER_SIZE ; - ext_sigcount = ext_header->count; - ext_sig = (void *)ext_header +EXT_HEADER_SIZE ; -for ( i =0 ; i < ext_sigcount; i++ ) - { -if (microcode_update_match (cpu, mc_header, - ext_sig->sig, ext_sig->pf) ) - goto find; - ext_sig++; - } -return 0 ; - find:pr_debug ("microcode: CPU%d found a matching microcode update with" " version %#x (current=%#x)\n" , cpu, mc_header->rev, uci->cpu_sig.rev);
xen/include/asm-x86/microcode.h +6 -0
@@ -3,6 +3,12 @@#include <xen/percpu.h> +enum microcode_match_result { +OLD_UCODE ,/* signature matched, but revision id is older or equal */ +NEW_UCODE ,/* signature matched, but revision id is newer */ +MIS_UCODE ,/* signature mismatched */ +}; +struct cpu_signature ;struct ucode_cpu_info ;
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 03/16] microcode/intel: extend microcode_update_match()
Quoted 15 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-5@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); -
xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 148
Quoted 10 lines
xen/arch/x86/microcode_intel.c +8
-2-return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;
Both here and ...
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/*
xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 163
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;
... here there's again an assumption that there's strict ordering between blobs, but as mentioned in reply to a later patch of an earlier version this isn't the case. Therefore the function can't be used to compare two arbitrary blobs, it may only be used to compare a blob with what is already loaded into a CPU. I think it is quite important to mention this restriction in a comment ahead of the function.
The code itself looks fine to me, and a comment could perhaps be added while committing; with such a comment
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 03/16] microcode/intel: extend microcode_update_match()
Quoted 52 lines · Jan Beulich
Quoted 15 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-5@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); -xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 148
Quoted 10 lines
xen/arch/x86/microcode_intel.c +8
-2-return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;Both here and ...
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 163
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;... here there's again an assumption that there's strict ordering between blobs, but as mentioned in reply to a later patch of an earlier version this isn't the case. Therefore the function can't be used to compare two arbitrary blobs, it may only be used to compare a blob with what is already loaded into a CPU. I think it is quite important to mention this restriction in a comment ahead of the function.
Quoted 2 lines
The code itself looks fine to me, and a comment could perhaps be added while committing; with such a comment
Agree. Because there will be a version 9, I can add a comment.
Quoted 1 line
Reviewed-by Jan Beulich <[email protected]>
Thanks.
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 03/16] microcode/intel: extend microcode_update_match()
Quoted 53 lines · Chao Gao
Quoted 52 lines · Jan Beulich
Quoted 15 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-5@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); -xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 148
Quoted 10 lines
xen/arch/x86/microcode_intel.c +8
-2-return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;Both here and ...
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 163
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;... here there's again an assumption that there's strict ordering between blobs, but as mentioned in reply to a later patch of an earlier version this isn't the case. Therefore the function can't be used to compare two arbitrary blobs, it may only be used to compare a blob with what is already loaded into a CPU. I think it is quite important to mention this restriction in a comment ahead of the function.
Quoted 4 lines
Quoted 2 lines
The code itself looks fine to me, and a comment could perhaps be added while committing; with such a comment
Agree. Because there will be a version 9, I can add a comment.
Having seen the uses in later patches, I think a comment is not the way to go. Instead I think you want to first match _both_ signatures against the local CPU (unless e.g. for either side this is logically guaranteed), and return DIS_UCODE upon mismatch. Only then should you actually compare the two signatures. While from a pure, abstract patch ordering perspective this isn't correct, we only care about patches applicable to the local CPU anyway, and for that case the extra restriction is fine. This way you'll be able to avoid taking extra precautions in vendor-independent code just to accommodate an Intel specific requirement.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 03/16] microcode/intel: extend microcode_update_match()
Quoted 57 lines · Jan Beulich
Quoted 56 lines · Chao Gao
Quoted 54 lines · Jan Beulich
Quoted 15 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-5@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); -xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 148
Quoted 10 lines
xen/arch/x86/microcode_intel.c +8
-2-return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;Both here and ...
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 163
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;... here there's again an assumption that there's strict ordering between blobs, but as mentioned in reply to a later patch of an earlier version this isn't the case. Therefore the function can't be used to compare two arbitrary blobs, it may only be used to compare a blob with what is already loaded into a CPU. I think it is quite important to mention this restriction in a comment ahead of the function.
The code itself looks fine to me, and a comment could perhaps be added while committing; with such a comment
Quoted 6 lines
Quoted 1 line
Agree. Because there will be a version 9, I can add a comment.
Having seen the uses in later patches, I think a comment is not the way to go. Instead I think you want to first match _both_ signatures against the local CPU (unless e.g. for either side this is logically guaranteed),
Yes. It is guaranteed at the first place: we ignore any patch that doesn't match with the CPU signature when parsing the ucode blob.
Quoted 7 lines
and return
DIS_UCODEupon mismatch. Only
then should you actually compare the two signatures. While from a pure, abstract patch ordering perspective this isn't correct, we only care about patches applicable to the local CPU anyway, and for that case the extra restriction is fine. This way you'll be able to avoid taking extra precautions in vendor-independent code just to accommodate an Intel specific requirement.
Yes. I agree and it seems that no further change is needed except the implementation of ->compare_patch. Please correct me if I am wrong.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 03/16] microcode/intel: extend microcode_update_match()
Quoted 60 lines · Chao Gao
Quoted 59 lines · Jan Beulich
Quoted 57 lines · Chao Gao
Quoted 52 lines · Jan Beulich
Quoted 15 lines · Chao Gao
xen/arch/x86/microcode_intel.c +3
-5@@ -134,14 +134,35 @@ static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig)return 0 ; } -static inline int microcode_update_match ( -unsigned int cpu_num,const struct microcode_header_intel *mc_header, -int sig,int pf) +static enum microcode_match_result microcode_update_match ( +const struct microcode_header_intel *mc_header,unsigned int sig, +unsigned int pf,unsigned int rev) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); -xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 148
Quoted 10 lines
xen/arch/x86/microcode_intel.c +8
-2-return (sigmatch (sig, uci->cpu_sig.sig, pf, uci->cpu_sig.pf) && - (mc_header->rev > uci->cpu_sig.rev)); +const struct extended_sigtable *ext_header; +const struct extended_signature *ext_sig; +unsigned long data_size =get_datasize (mc_header); +unsigned int i; +const void *end = (const void *)mc_header +get_totalsize (mc_header); + +if (sigmatch (sig, mc_header->sig, pf, mc_header->pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;Both here and ...
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+ ext_header = (const void *)(mc_header +1 ) + data_size; + ext_sig = (const void *)(ext_header +1 ); + +/* xen/arch/x86/microcode_intel.c static int collect_cpu_info(unsigned int cpu_num, struct cpu_signature *csig) · line 163
Quoted 10 lines
xen/arch/x86/microcode_intel.c +10
-0+* Make sure there is enough space to hold an extended header and enough +* array elements. +*/ +if ( (end < (const void *)ext_sig) || + (end < (const void *)(ext_sig + ext_header->count)) ) +return MIS_UCODE ; + +for ( i =0 ; i < ext_header->count; i++ ) +if (sigmatch (sig, ext_sig[i].sig, pf, ext_sig[i].pf) ) +return (mc_header->rev > rev) ?NEW_UCODE :OLD_UCODE ;... here there's again an assumption that there's strict ordering between blobs, but as mentioned in reply to a later patch of an earlier version this isn't the case. Therefore the function can't be used to compare two arbitrary blobs, it may only be used to compare a blob with what is already loaded into a CPU. I think it is quite important to mention this restriction in a comment ahead of the function.
Quoted 2 lines
The code itself looks fine to me, and a comment could perhaps be added while committing; with such a comment
Agree. Because there will be a version 9, I can add a comment.
Quoted 7 lines
Quoted 4 lines
Having seen the uses in later patches, I think a comment is not the way to go. Instead I think you want to first match _both_ signatures against the local CPU (unless e.g. for either side this is logically guaranteed),
Yes. It is guaranteed at the first place: we ignore any patch that doesn't match with the CPU signature when parsing the ucode blob.
Well, if that's the case, then perhaps a comment is really all that's needed, i.e. ...
Quoted 10 lines
Quoted 7 lines
and return
DIS_UCODEupon mismatch. Only
then should you actually compare the two signatures. While from a pure, abstract patch ordering perspective this isn't correct, we only care about patches applicable to the local CPU anyway, and for that case the extra restriction is fine. This way you'll be able to avoid taking extra precautions in vendor-independent code just to accommodate an Intel specific requirement.Yes. I agree and it seems that no further change is needed except the implementation of ->compare_patch. Please correct me if I am wrong.
... maybe not even the change here.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 4/16 microcode/amd: fix memory leak
In reply to Chao GaoTwo buffers, '->equiv_cpu_table' and '->mpb', inside 'mc_amd' might be allocated and in the error-handing path they are not freed properly.
---
changes in v8:
- new
- it is found by reading code. No test is done.
--- xen/arch/x86/microcode_amd.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)
xen/arch/x86/microcode_amd.c +11 -3
@@ -433,6 +433,9 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf, goto out; } + mc_amd->equiv_cpu_table_size =0 ; + mc_amd->equiv_cpu_table =NULL ; +/* * Multiple container file support: * 1. check if this container file has equiv_cpu_id match
@@ -479,6 +482,8 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,if ( error ) { +if ( mc_amd->equiv_cpu_table_size ) +xfree (mc_amd->equiv_cpu_table);xfree (mc_amd); goto out; }
@@ -549,11 +554,14 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,if ( save_error ) { -xfree (mc_amd); uci->mc.mc_amd = mc_old; + mc_old = mc_amd; } -else -xfree (mc_old); + +if ( mc_old->mpb_size ) +xfree (mc_old->mpb); +xfree (mc_old->equiv_cpu_table); +xfree (mc_old); out: #if CONFIG_HVM
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 04/16] microcode/amd: fix memory leak
xen/arch/x86/microcode_amd.c static int cpu_request_microcode(unsigned int cpu, const void *buf, · line 437
Quoted 8 lines · Chao Gao
xen/arch/x86/microcode_amd.c +2
-0@@ -433,6 +433,9 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf, goto out; } + mc_amd->equiv_cpu_table_size =0 ; + mc_amd->equiv_cpu_table =NULL ;
Instead of adding these, you could as well use xzalloc() further up and drop the explicit initialization of ->mpb and ->mpb_size to NULL/0 a few lines down.
xen/arch/x86/microcode_amd.c static int cpu_request_microcode(unsigned int cpu, const void *buf, · line 486
Quoted 6 lines
xen/arch/x86/microcode_amd.c +2
-0@@ -479,6 +482,8 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,if ( error ) { +if ( mc_amd->equiv_cpu_table_size ) +xfree (mc_amd->equiv_cpu_table);
Why the if()? There's no problem calling xfree() with a NULL argument.
Quoted 4 lines
xen/arch/x86/microcode_amd.c +0
-0@@ -549,11 +554,14 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,if ( save_error ) {
xen/arch/x86/microcode_amd.c static int cpu_request_microcode(unsigned int cpu, const void *buf, · line 563
Quoted 10 lines
xen/arch/x86/microcode_amd.c +5
-3-xfree (mc_amd); uci->mc.mc_amd = mc_old; + mc_old = mc_amd; } -else -xfree (mc_old); + +if ( mc_old->mpb_size ) +xfree (mc_old->mpb); +xfree (mc_old->equiv_cpu_table);
Same here. With the adjustments made (could possibly be done again while committing)
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 5/16 microcode/amd: distinguish old and mismatched ucode in microcode_fits()
In reply to Chao GaoSometimes, an ucode with a level lower than or equal to current CPU's patch level is useful. For example, to work around a broken bios which only loads ucode for BSP, when BSP parses an ucode blob during bootup, it is better to save an ucode with lower or equal level for APs
No functional change is made in this patch. But following patch would handle "old ucode" and "mismatched ucode" separately.
---
Changes in v8:
- new
--- xen/arch/x86/microcode_amd.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)
xen/arch/x86/microcode_amd.c +9 -9
@@ -152,8 +152,8 @@ static bool_t find_equiv_cpu_id(const struct equiv_cpu_entry *equiv_cpu_table,return 0 ; } -static bool_t microcode_fits (const struct microcode_amd *mc_amd, -unsigned int cpu) +static enum microcode_match_result microcode_fits ( +const struct microcode_amd *mc_amd,unsigned int cpu) {struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu);const struct microcode_header_amd *mc_header = mc_amd->mpb;
@@ -167,27 +167,27 @@ static bool_t microcode_fits(const struct microcode_amd *mc_amd, current_cpu_id =cpuid_eax (0x00000001 );if ( !find_equiv_cpu_id (equiv_cpu_table, current_cpu_id, &equiv_cpu_id) ) -return 0 ; +return MIS_UCODE ;if ( (mc_header->processor_rev_id) != equiv_cpu_id ) -return 0 ; +return MIS_UCODE ;if ( !verify_patch_size (mc_amd->mpb_size) ) {pr_debug ("microcode: patch size mismatch\n" ); -return 0 ; +return MIS_UCODE ; }if ( mc_header->patch_id <= uci->cpu_sig.rev ) {pr_debug ("microcode: patch is already at required level or greater.\n" ); -return 0 ; +return OLD_UCODE ; }pr_debug ("microcode: CPU%d found a matching microcode update with version %#x (current=%#x)\n" , cpu, mc_header->patch_id, uci->cpu_sig.rev); -return 1 ; +return NEW_UCODE ; }static int apply_microcode (unsigned int cpu)
@@ -502,7 +502,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,while ( (error =get_ucode_from_buffer_amd (mc_amd, buf, bufsize, &offset)) ==0 ) { -if (microcode_fits (mc_amd, cpu) ) +if (microcode_fits (mc_amd, cpu) ==NEW_UCODE ) { error =apply_microcode (cpu);if ( error )
@@ -583,7 +583,7 @@ static int microcode_resume_match(unsigned int cpu, const void *mc)struct microcode_amd *mc_amd = uci->mc.mc_amd;const struct microcode_amd *src = mc; -if ( !microcode_fits (src, cpu) ) +if (microcode_fits (src, cpu) !=NEW_UCODE )return 0 ;if ( src != mc_amd )
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 05/16] microcode/amd: distinguish old and mismatched ucode in microcode_fits()
Quoted 9 lines · Chao Gao
Sometimes, an ucode with a level lower than or equal to current CPU's patch level is useful. For example, to work around a broken bios which only loads ucode for BSP, when BSP parses an ucode blob during bootup, it is better to save an ucode with lower or equal level for APs
No functional change is made in this patch. But following patch would handle "old ucode" and "mismatched ucode" separately.
Signed-off-by Chao Gao <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 6/16 microcode: introduce a global cache of ucode patch
In reply to Chao Gaoto replace the current per-cpu cache 'uci->mc'.
With the assumption that all CPUs in the system have the same signature (family, model, stepping and 'pf'), one microcode update matches with one cpu should match with others. Having multiple microcode revisions on different cpus would cause system unstable and should be avoided. Hence, caching only one microcode update is good enough for all cases.
Introduce a global variable, microcode_cache, to store the newest matching microcode update. Whenever we get a new valid microcode update, its revision id is compared against that of the microcode update to determine whether the "microcode_cache" needs to be replaced. And this global cache is loaded to cpu in apply_microcode().
All operations on the cache is protected by 'microcode_mutex'.
Note that I deliberately avoid touching 'uci->mc' as I am going to remove it completely in the next patch.
---
Changes in v8:
- Free generic wrapper struct in general code
- Try to update cache as long as a patch covers current cpu. Previsouly, cache is updated only if the patch is newer than current update revision in the CPU. The small difference can work around a broken bios which only applies microcode update to BSP and software has to apply the same update to other CPUs.
Changes in v7:
- reworked to cache only one microcode patch rather than a list of microcode patches.
--- xen/arch/x86/microcode.c | 39 ++++++++++++++++++ xen/arch/x86/microcode_amd.c | 90 +++++++++++++++++++++++++++++++++++++---- xen/arch/x86/microcode_intel.c | 75 ++++++++++++++++++++++++++-------- xen/include/asm-x86/microcode.h | 17 ++++++++ 4 files changed, 198 insertions(+), 23 deletions(-)
xen/arch/x86/microcode.c +39 -0
@@ -61,6 +61,9 @@ static struct ucode_mod_blob __initdata ucode_blob;*/ static bool_t __initdata ucode_scan; +/* Protected by microcode_mutex */ +static struct microcode_patch *microcode_cache; +void __init microcode_set_module (unsigned int idx) { ucode_mod_idx = idx;
@@ -262,6 +265,42 @@ int microcode_resume_cpu(unsigned int cpu)return err; } +void microcode_free_patch (struct microcode_patch *microcode_patch) +{ + microcode_ops->free_patch (microcode_patch->mc); +xfree (microcode_patch); +} + +const struct microcode_patch *microcode_get_cache (void ) +{ +ASSERT (spin_is_locked (µcode_mutex)); + +return microcode_cache; +} + +/* Return true if cache gets updated. Otherwise, return false */ +bool microcode_update_cache (struct microcode_patch *patch) +{ + +ASSERT (spin_is_locked (µcode_mutex)); + +if ( !microcode_cache ) + microcode_cache = patch; +else if ( microcode_ops->compare_patch (patch, microcode_cache) == +NEW_UCODE ) + { +microcode_free_patch (microcode_cache); + microcode_cache = patch; + } +else + { +microcode_free_patch (patch); +return false; + } + +return true; +} +static int microcode_update_cpu (const void *buf,size_t size) {int err;
xen/arch/x86/microcode_amd.c +83 -7
120 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +59 -16
143 lines not on this page · raw message
xen/include/asm-x86/microcode.h +17 -0
@@ -12,6 +12,14 @@ enum microcode_match_result {struct cpu_signature ;struct ucode_cpu_info ; +struct microcode_patch { +union { +struct microcode_intel *mc_intel; +struct microcode_amd *mc_amd; +void *mc; + }; +}; +struct microcode_ops {int (*microcode_resume_match)(unsigned int cpu,const void *mc); int (*cpu_request_microcode)(unsigned int cpu, const void *buf,
@@ -19,6 +27,11 @@ struct microcode_ops {int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig);int (*apply_microcode)(unsigned int cpu);int (*start_update)(void ); +void (*free_patch)(void *mc); +bool (*match_cpu)(const struct microcode_patch *patch); +enum microcode_match_result (*compare_patch)( +const struct microcode_patch *new, +const struct microcode_patch *old); };struct cpu_signature {
@@ -39,4 +52,8 @@ struct ucode_cpu_info { DECLARE_PER_CPU(struct ucode_cpu_info, ucode_cpu_info);extern const struct microcode_ops *microcode_ops; +const struct microcode_patch *microcode_get_cache (void ); +bool microcode_update_cache (struct microcode_patch *patch); +void microcode_free_patch (struct microcode_patch *patch); +#endif /* ASM_X86__MICROCODE_H */
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 06/16] microcode: introduce a global cache of ucode patch
xen/arch/x86/microcode.c int microcode_resume_cpu(unsigned int cpu) · line 290
Quoted 9 lines · Chao Gao
xen/arch/x86/microcode.c +9
-0+bool microcode_update_cache (struct microcode_patch *patch) +{ + +ASSERT (spin_is_locked (µcode_mutex)); + +if ( !microcode_cache ) + microcode_cache = patch; +else if ( microcode_ops->compare_patch (patch, microcode_cache) == +NEW_UCODE )
Indentation is wrong here.
Quoted 19 lines
xen/arch/x86/microcode_amd.c +19
-0+static struct microcode_patch *alloc_microcode_patch ( +const struct microcode_amd *mc_amd) +{ + struct microcode_patch *microcode_patch = xmalloc(struct microcode_patch); + struct microcode_amd *cache = xmalloc(struct microcode_amd); +void *mpb =xmalloc_bytes (mc_amd->mpb_size); +struct equiv_cpu_entry *equiv_cpu_table = +xmalloc_bytes (mc_amd->equiv_cpu_table_size); + +if ( !microcode_patch || !cache || !mpb || !equiv_cpu_table ) + { +xfree (microcode_patch); +xfree (cache); +xfree (mpb); +xfree (equiv_cpu_table); +return ERR_PTR (-ENOMEM ); + } + +memcpy (mpb, mc_amd->mpb, mc_amd->mpb_size);
xen/arch/x86/microcode_amd.c static enum microcode_match_result microcode_fits( · line 228
Quoted 10 lines
xen/arch/x86/microcode_amd.c +10
-0+ cache->mpb = mpb; + cache->mpb_size = mc_amd->mpb_size; +memcpy (equiv_cpu_table, mc_amd->equiv_cpu_table, + mc_amd->equiv_cpu_table_size); + cache->equiv_cpu_table = equiv_cpu_table; + cache->equiv_cpu_table_size = mc_amd->equiv_cpu_table_size; + microcode_patch->mc_amd = cache; + +return microcode_patch; +}
Why is it that everything needs to be copied here, rather than simply shuffling one (or a few) pointer(s)? Can't the caller simply install the argument it passes here as the new cache blob?
xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 280
Quoted 7 lines
xen/arch/x86/microcode_intel.c +7
-0+static enum microcode_match_result compare_patch ( +const struct microcode_patch *new,const struct microcode_patch *old) +{ +const struct microcode_header_intel *old_header = &old->mc_intel->hdr; + +return microcode_update_match (&new->mc_intel->hdr, old_header->sig, + old_header->pf, old_header->rev);
So this is exactly what I said on the earlier patch the function cannot be used for. The way "pf" works precludes this, as said in reply to an earlier version, and no-one corrected me (i.e. I'm in no way excluding I'm misunderstanding something here).
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 06/16] microcode: introduce a global cache of ucode patch
Quoted 38 lines · Jan Beulich
xen/arch/x86/microcode.c int microcode_resume_cpu(unsigned int cpu) · line 290
Quoted 9 lines · Chao Gao
xen/arch/x86/microcode.c +9
-0+bool microcode_update_cache (struct microcode_patch *patch) +{ + +ASSERT (spin_is_locked (µcode_mutex)); + +if ( !microcode_cache ) + microcode_cache = patch; +else if ( microcode_ops->compare_patch (patch, microcode_cache) == +NEW_UCODE )Indentation is wrong here.
Quoted 25 lines
xen/arch/x86/microcode_amd.c +25
-0+static struct microcode_patch *alloc_microcode_patch ( +const struct microcode_amd *mc_amd) +{ + struct microcode_patch *microcode_patch = xmalloc(struct microcode_patch); + struct microcode_amd *cache = xmalloc(struct microcode_amd); +void *mpb =xmalloc_bytes (mc_amd->mpb_size); +struct equiv_cpu_entry *equiv_cpu_table = +xmalloc_bytes (mc_amd->equiv_cpu_table_size); + +if ( !microcode_patch || !cache || !mpb || !equiv_cpu_table ) + { +xfree (microcode_patch); +xfree (cache); +xfree (mpb); +xfree (equiv_cpu_table); +return ERR_PTR (-ENOMEM ); + } + +memcpy (mpb, mc_amd->mpb, mc_amd->mpb_size); + cache->mpb = mpb; + cache->mpb_size = mc_amd->mpb_size; +memcpy (equiv_cpu_table, mc_amd->equiv_cpu_table, + mc_amd->equiv_cpu_table_size); + cache->equiv_cpu_table = equiv_cpu_table; + cache->equiv_cpu_table_size = mc_amd->equiv_cpu_table_size;
Quoted 8 lines
xen/arch/x86/microcode_amd.c static enum microcode_match_result microcode_fits( · line 228
Quoted 4 lines
xen/arch/x86/microcode_amd.c +4
-0+ microcode_patch->mc_amd = cache; + +return microcode_patch; +}Why is it that everything needs to be copied here, rather than simply shuffling one (or a few) pointer(s)? Can't the caller simply install the argument it passes here as the new cache blob?
The old per-cpu cache would use the pointers. And the old cache struct is removed in "microcode: remove struct ucode_cpu_info". I can add a patch after that one to reuse the pointers. Otherwise, I may have to merge following two patches into this one.
Quoted 13 lines
xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 280
Quoted 8 lines
xen/arch/x86/microcode_intel.c +7
-0+static enum microcode_match_result compare_patch ( +const struct microcode_patch *new,const struct microcode_patch *old) +{ +const struct microcode_header_intel *old_header = &old->mc_intel->hdr; + +return microcode_update_match (&new->mc_intel->hdr, old_header->sig, + old_header->pf, old_header->rev);So this is exactly what I said on the earlier patch the function cannot be used for. The way "pf" works precludes this, as said in reply to an earlier version, and no-one corrected me (i.e. I'm in no way excluding I'm misunderstanding something here).
How about just check 'rev' here and leave a comment here to explain why?
We drops all mismatched patches (including that only has 'pf' mismatched) compared with current CPU signature. Given that, it is fine to only check the revision number.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 06/16] microcode: introduce a global cache of ucode patch
Quoted 48 lines · Chao Gao
Quoted 38 lines · Jan Beulich
xen/arch/x86/microcode.c int microcode_resume_cpu(unsigned int cpu) · line 290
Quoted 9 lines · Chao Gao
xen/arch/x86/microcode.c +9
-0+bool microcode_update_cache (struct microcode_patch *patch) +{ + +ASSERT (spin_is_locked (µcode_mutex)); + +if ( !microcode_cache ) + microcode_cache = patch; +else if ( microcode_ops->compare_patch (patch, microcode_cache) == +NEW_UCODE )Indentation is wrong here.
Quoted 25 lines
xen/arch/x86/microcode_amd.c +25
-0+static struct microcode_patch *alloc_microcode_patch ( +const struct microcode_amd *mc_amd) +{ + struct microcode_patch *microcode_patch = xmalloc(struct microcode_patch); + struct microcode_amd *cache = xmalloc(struct microcode_amd); +void *mpb =xmalloc_bytes (mc_amd->mpb_size); +struct equiv_cpu_entry *equiv_cpu_table = +xmalloc_bytes (mc_amd->equiv_cpu_table_size); + +if ( !microcode_patch || !cache || !mpb || !equiv_cpu_table ) + { +xfree (microcode_patch); +xfree (cache); +xfree (mpb); +xfree (equiv_cpu_table); +return ERR_PTR (-ENOMEM ); + } + +memcpy (mpb, mc_amd->mpb, mc_amd->mpb_size); + cache->mpb = mpb; + cache->mpb_size = mc_amd->mpb_size; +memcpy (equiv_cpu_table, mc_amd->equiv_cpu_table, + mc_amd->equiv_cpu_table_size); + cache->equiv_cpu_table = equiv_cpu_table; + cache->equiv_cpu_table_size = mc_amd->equiv_cpu_table_size;Quoted 8 lines
xen/arch/x86/microcode_amd.c static enum microcode_match_result microcode_fits( · line 228
Quoted 4 lines
xen/arch/x86/microcode_amd.c +4
-0+ microcode_patch->mc_amd = cache; + +return microcode_patch; +}Why is it that everything needs to be copied here, rather than simply shuffling one (or a few) pointer(s)? Can't the caller simply install the argument it passes here as the new cache blob?
Quoted 4 lines
The old per-cpu cache would use the pointers. And the old cache struct is removed in "microcode: remove struct
ucode_cpu_info". I can add a patch after that one to reuse the pointers. Otherwise, I may have to merge following two patches into this one.
If this is just a transitory step, then it's fine, but you should say so in the description (and the patch to re-use the already allocated space would then be nice to be part of this series).
Quoted 13 lines
Quoted 4 lines
Quoted 4 lines
xen/arch/x86/microcode_intel.c +4
-0+static enum microcode_match_result compare_patch ( +const struct microcode_patch *new,const struct microcode_patch *old) +{ +const struct microcode_header_intel *old_header = &old->mc_intel->hdr;Quoted 8 lines
xen/arch/x86/microcode_intel.c static int microcode_sanity_check(void *mc) · line 280
Quoted 3 lines
xen/arch/x86/microcode_intel.c +3
-0+ +return microcode_update_match (&new->mc_intel->hdr, old_header->sig, + old_header->pf, old_header->rev);So this is exactly what I said on the earlier patch the function cannot be used for. The way "pf" works precludes this, as said in reply to an earlier version, and no-one corrected me (i.e. I'm in no way excluding I'm misunderstanding something here).
Quoted 6 lines
How about just check 'rev' here and leave a comment here to explain why?
We drops all mismatched patches (including that only has 'pf' mismatched) compared with current CPU signature. Given that, it is fine to only check the revision number.
Ah, yes, that's apparently another option. But it'll require re-working microcode_update_match(), or not using it here, afaics.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 7/16 microcode: clean up microcode_resume_cpu
In reply to Chao GaoPreviously, a per-cpu ucode cache is maintained. Then each CPU had one per-cpu update cache and there might be multiple versions of microcode. Thus microcode_resume_cpu tried best to update microcode by loading every update cache until a successful load.
But now the cache struct is simplified a lot and only a single ucode is cached. a single invocation of ->apply_microcode() would load the cache and make microcode updated.
---
changes in v8:
- new
- separated from the following patch
--- xen/arch/x86/microcode.c | 40 ++--------------------------------- xen/arch/x86/microcode_amd.c | 47 ----------------------------------------- xen/arch/x86/microcode_intel.c | 6 ------ xen/include/asm-x86/microcode.h | 1 - 4 files changed, 2 insertions(+), 92 deletions(-)
xen/arch/x86/microcode.c +2 -38
@@ -215,8 +215,6 @@ int microcode_resume_cpu(unsigned int cpu) {int err;struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); -struct cpu_signature nsig; -unsigned int cpu2;if ( !microcode_ops )return 0 ;
@@ -224,42 +222,8 @@ int microcode_resume_cpu(unsigned int cpu)spin_lock (µcode_mutex); err = microcode_ops->collect_cpu_info (cpu, &uci->cpu_sig); -if ( err ) - { -__microcode_fini_cpu (cpu); -spin_unlock (µcode_mutex); -return err; - } - -if ( uci->mc.mc_valid ) - { - err = microcode_ops->microcode_resume_match (cpu, uci->mc.mc_valid); -if ( err >=0 ) - { -if ( err ) - err = microcode_ops->apply_microcode (cpu); -spin_unlock (µcode_mutex); -return err; - } - } - - nsig = uci->cpu_sig; -__microcode_fini_cpu (cpu); - uci->cpu_sig = nsig; - - err = -EIO ; -for_each_online_cpu ( cpu2 ) - { - uci = &per_cpu (ucode_cpu_info, cpu2); -if ( uci->mc.mc_valid && - microcode_ops->microcode_resume_match (cpu, uci->mc.mc_valid) >0 ) - { - err = microcode_ops->apply_microcode (cpu); -break ; - } - } - -__microcode_fini_cpu (cpu); +if (likely (!err) ) + err = microcode_ops->apply_microcode (cpu);spin_unlock (µcode_mutex);return err;
xen/arch/x86/microcode_amd.c +0 -47
59 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +0 -6
@@ -443,13 +443,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf,return error; } -static int microcode_resume_match (unsigned int cpu,const void *mc) -{ -return get_matching_microcode (mc, cpu); -} -static const struct microcode_ops microcode_intel_ops = { - .microcode_resume_match = microcode_resume_match, .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode,
xen/include/asm-x86/microcode.h +0 -1
@@ -21,7 +21,6 @@ struct microcode_patch { };struct microcode_ops { -int (*microcode_resume_match)(unsigned int cpu,const void *mc);int (*cpu_request_microcode)(unsigned int cpu,const void *buf,size_t size);int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 07/16] microcode: clean up microcode_resume_cpu
Quoted 10 lines · Chao Gao
Previously, a per-cpu ucode cache is maintained. Then each CPU had one per-cpu update cache and there might be multiple versions of microcode. Thus
microcode_resume_cputried best to update microcode by loading every update cache until a successful load.But now the cache struct is simplified a lot and only a single ucode is cached. a single invocation of ->apply_microcode() would load the cache and make microcode updated.
Signed-off-by Chao Gao <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 8/16 microcode: remove struct ucode_cpu_info
In reply to Chao GaoRemove the per-cpu cache field in struct ucode_cpu_info since it has been replaced by a global cache. It would leads to only one field remaining in ucode_cpu_info. Then, this struct is removed and the remaining field (cpu signature) is stored in per-cpu area.
The cpu status notifier is also removed. It was used to free the "mc" field to avoid memory leak.
---
Changes in v8:
- split microcode_resume_cpu() cleanup to a separate patch.
Changes in v6:
- remove the whole struct ucode_cpu_info instead of the per-cpu cache in it.
--- xen/arch/x86/apic.c | 2 +- xen/arch/x86/microcode.c | 57 +++++++-------------------------------- xen/arch/x86/microcode_amd.c | 60 +++++++++++------------------------------ xen/arch/x86/microcode_intel.c | 31 ++++++++------------- xen/arch/x86/spec_ctrl.c | 2 +- xen/include/asm-x86/microcode.h | 12 +-------- 6 files changed, 39 insertions(+), 125 deletions(-)
xen/arch/x86/apic.c +1 -1
@@ -1193,7 +1193,7 @@ static void __init check_deadline_errata(void)else rev = (unsigned long )m->driver_data; -if (this_cpu (ucode_cpu_info).cpu_sig.rev >= rev ) +if (this_cpu (cpu_sig).rev >= rev )return ;setup_clear_cpu_cap (X86_FEATURE_TSC_DEADLINE );
xen/arch/x86/microcode.c +9 -48
119 lines not on this page · raw message
xen/arch/x86/microcode_amd.c +16 -44
146 lines not on this page · raw message
xen/arch/x86/microcode_intel.c +11 -20
@@ -257,13 +257,13 @@ static int microcode_sanity_check(void *mc)static bool match_cpu (const struct microcode_patch *patch) { -const struct ucode_cpu_info *uci = &this_cpu (ucode_cpu_info); +const struct cpu_signature *sig = &this_cpu (cpu_sig);if ( !patch )return false; -return microcode_update_match (&patch->mc_intel->hdr, uci->cpu_sig.sig, - uci->cpu_sig.pf, uci->cpu_sig.rev) ==NEW_UCODE ; +return microcode_update_match (&patch->mc_intel->hdr, + sig->sig, sig->pf, sig->rev) ==NEW_UCODE ; }static void free_patch (void *mc)
@@ -287,7 +287,7 @@ static enum microcode_match_result compare_patch(*/ static int get_matching_microcode (const void *mc,unsigned int cpu) { -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu); +struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_intel *mc_header = mc;unsigned long total_size =get_totalsize (mc_header);void *new_mc =xmalloc_bytes (total_size);
@@ -303,8 +303,8 @@ static int get_matching_microcode(const void *mc, unsigned int cpu) new_patch->mc_intel = new_mc;/* Make sure that this patch covers current CPU */ -if (microcode_update_match (&new_patch->mc_intel->hdr, uci->cpu_sig.sig, - uci->cpu_sig.pf, uci->cpu_sig.rev) ==MIS_UCODE ) +if (microcode_update_match (&new_patch->mc_intel->hdr, sig->sig, + sig->pf, sig->rev) ==MIS_UCODE ) {microcode_free_patch (new_patch);return 0 ;
@@ -314,17 +314,8 @@ static int get_matching_microcode(const void *mc, unsigned int cpu)pr_debug ("microcode: CPU%d found a matching microcode update with" " version %#x (current=%#x)\n" , - cpu, mc_header->rev, uci->cpu_sig.rev); - new_mc =xmalloc_bytes (total_size); -if ( new_mc ==NULL ) - { -printk (KERN_ERR "microcode: error! Can not allocate memory\n" ); -return -ENOMEM ; - } + cpu, mc_header->rev, sig->rev); -memcpy (new_mc, mc, total_size); -xfree (uci->mc.mc_intel); - uci->mc.mc_intel = new_mc;return 1 ; }
@@ -334,7 +325,7 @@ static int apply_microcode(unsigned int cpu)uint64_t msr_content;unsigned int val[2 ];unsigned int cpu_num =raw_smp_processor_id (); -struct ucode_cpu_info *uci = &per_cpu (ucode_cpu_info, cpu_num); +struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_intel *mc_intel;const struct microcode_patch *patch =microcode_get_cache ();
@@ -365,14 +356,14 @@ static int apply_microcode(unsigned int cpu) {printk (KERN_ERR "microcode: CPU%d update from revision " "%#x to %#x failed. Resulting revision is %#x.\n" , cpu_num, - uci->cpu_sig.rev, mc_intel->hdr.rev, val[1 ]); + sig->rev, mc_intel->hdr.rev, val[1 ]);return -EIO ; }printk (KERN_INFO "microcode: CPU%d updated from revision " "%#x to %#x, date = %04x-%02x-%02x \n" , - cpu_num, uci->cpu_sig.rev, val[1 ], mc_intel->hdr.year, + cpu_num, sig->rev, val[1 ], mc_intel->hdr.year, mc_intel->hdr.month, mc_intel->hdr.day); - uci->cpu_sig.rev = val[1 ]; + sig->rev = val[1 ];return 0 ; }
xen/arch/x86/spec_ctrl.c +1 -1
@@ -438,7 +438,7 @@ static bool __init check_smt_enabled(void)/* Calculate whether Retpoline is known-safe on this CPU. */ static bool __init retpoline_safe (uint64_t caps) { -unsigned int ucode_rev =this_cpu (ucode_cpu_info).cpu_sig.rev; +unsigned int ucode_rev =this_cpu (cpu_sig).rev;if ( boot_cpu_data.x86_vendor & (X86_VENDOR_AMD |X86_VENDOR_HYGON ) )return true;
xen/include/asm-x86/microcode.h +1 -11
@@ -10,7 +10,6 @@ enum microcode_match_result { };struct cpu_signature ; -struct ucode_cpu_info ; struct microcode_patch { union {
@@ -39,16 +38,7 @@ struct cpu_signature {unsigned int rev; }; -struct ucode_cpu_info { -struct cpu_signature cpu_sig; -union { -struct microcode_intel *mc_intel; -struct microcode_amd *mc_amd; -void *mc_valid; - } mc; -}; - -DECLARE_PER_CPU(struct ucode_cpu_info, ucode_cpu_info); +DECLARE_PER_CPU(struct cpu_signature, cpu_sig);extern const struct microcode_ops *microcode_ops;const struct microcode_patch *microcode_get_cache (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 08/16] microcode: remove struct ucode_cpu_info
Quoted 9 lines · Chao Gao
Remove the per-cpu cache field in struct
ucode_cpu_infosince it has been replaced by a global cache. It would leads to only one field remaining inucode_cpu_info. Then, this struct is removed and the remaining field (cpu signature) is stored in per-cpu area.The cpu status notifier is also removed. It was used to free the "mc" field to avoid memory leak.
Signed-off-by Chao Gao <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 9/16 microcode: remove pointless 'cpu' parameter
In reply to Chao GaoSome callbacks in microcode_ops or related functions take a cpu id parameter. But at current call sites, the cpu id parameter is always equal to current cpu id. Some of them even use an assertion to guarantee this. Remove this redundent 'cpu' parameter.
---
Changes in v8:
- Use current_cpu_data in collect_cpu_info()
- keep the cpu parameter of check_final_patch_levels()
- use smp_processor_id() in get_matching_microcode() rather than define a local variable and label it "__maybe_unused"
--- xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/microcode.c | 20 ++++++++------------ xen/arch/x86/microcode_amd.c | 35 +++++++++++++---------------------- xen/arch/x86/microcode_intel.c | 28 ++++++++++------------------ xen/arch/x86/smpboot.c | 2 +- xen/include/asm-x86/microcode.h | 7 +++---- xen/include/asm-x86/processor.h | 2 +- 7 files changed, 37 insertions(+), 59 deletions(-)
xen/arch/x86/acpi/power.c +1 -1
@@ -253,7 +253,7 @@ static int enter_state(u32 state)console_end_sync (); -microcode_resume_cpu (0 ); +microcode_resume_cpu ();if ( !recheck_cpu_features (0 ) )panic ("Missing previously available feature(s)\n" );
xen/arch/x86/microcode.c +8 -12
@@ -196,19 +196,19 @@ struct microcode_info {char buffer[1 ]; }; -int microcode_resume_cpu (unsigned int cpu) +int microcode_resume_cpu (void ) {int err; -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +struct cpu_signature *sig = &this_cpu (cpu_sig);if ( !microcode_ops )return 0 ;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (cpu, sig); + err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->apply_microcode (cpu); + err = microcode_ops->apply_microcode ();spin_unlock (µcode_mutex);return err;
@@ -258,9 +258,9 @@ static int microcode_update_cpu(const void *buf, size_t size)spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (cpu, sig); + err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (cpu, buf, size); + err = microcode_ops->cpu_request_microcode (buf, size);spin_unlock (µcode_mutex);return err;
@@ -349,8 +349,6 @@ __initcall(microcode_init);int __init early_microcode_update_cpu (bool start_update) { -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);int rc =0 ;void *data =NULL ;size_t len;
@@ -369,7 +367,7 @@ int __init early_microcode_update_cpu(bool start_update) data =bootstrap_map (&ucode_mod); } - microcode_ops->collect_cpu_info (cpu, sig); + microcode_ops->collect_cpu_info (&this_cpu (cpu_sig));if ( data ) {
@@ -387,8 +385,6 @@ int __init early_microcode_update_cpu(bool start_update)int __init early_microcode_init (void ) { -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);int rc; rc =microcode_init_intel ();
@@ -401,7 +397,7 @@ int __init early_microcode_init(void)if ( microcode_ops ) { - microcode_ops->collect_cpu_info (cpu, sig); + microcode_ops->collect_cpu_info (&this_cpu (cpu_sig));if ( ucode_mod.mod_end || ucode_blob.size ) rc =early_microcode_update_cpu (true);
xen/arch/x86/microcode_amd.c +13 -22
@@ -78,23 +78,23 @@ struct mpbhdr {static DEFINE_SPINLOCK (microcode_update_lock);/* See comment in start_update() for cases when this routine fails */ -static int collect_cpu_info (unsigned int cpu,struct cpu_signature *csig) +static int collect_cpu_info (struct cpu_signature *csig) { -struct cpuinfo_x86 *c = &cpu_data[cpu]; +struct cpuinfo_x86 *c = ¤t_cpu_data;memset (csig,0 ,sizeof (*csig));if ( (c->x86_vendor !=X86_VENDOR_AMD ) || (c->x86 <0x10 ) ) {printk (KERN_ERR "microcode: CPU%d not a capable AMD processor\n" , - cpu); +smp_processor_id ());return -EINVAL ; }rdmsrl (MSR_AMD_PATCHLEVEL , csig->rev);pr_debug ("microcode: CPU%d collect_cpu_info: patch_id=%#x\n" , - cpu, csig->rev); +smp_processor_id (), csig->rev);return 0 ; }
@@ -153,17 +153,15 @@ static bool_t find_equiv_cpu_id(const struct equiv_cpu_entry *equiv_cpu_table, }static enum microcode_match_result microcode_fits ( -const struct microcode_amd *mc_amd,unsigned int cpu) +const struct microcode_amd *mc_amd) { +unsigned int cpu =smp_processor_id ();const struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *mc_header = mc_amd->mpb;const struct equiv_cpu_entry *equiv_cpu_table = mc_amd->equiv_cpu_table;unsigned int current_cpu_id;unsigned int equiv_cpu_id; -/* We should bind the task to the CPU */ -BUG_ON (cpu !=raw_smp_processor_id ()); - current_cpu_id =cpuid_eax (0x00000001 );if ( !find_equiv_cpu_id (equiv_cpu_table, current_cpu_id, &equiv_cpu_id) )
@@ -192,9 +190,7 @@ static enum microcode_match_result microcode_fits(static bool match_cpu (const struct microcode_patch *patch) { -if ( !patch ) -return false; -return microcode_fits (patch->mc_amd,smp_processor_id ()) ==NEW_UCODE ; +return patch && (microcode_fits (patch->mc_amd) ==NEW_UCODE ); } static struct microcode_patch *alloc_microcode_patch(
@@ -251,18 +247,16 @@ static enum microcode_match_result compare_patch(return MIS_UCODE ; } -static int apply_microcode (unsigned int cpu) +static int apply_microcode (void ) {unsigned long flags;uint32_t rev;int hw_err; +unsigned int cpu =smp_processor_id ();struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *hdr;const struct microcode_patch *patch =microcode_get_cache (); -/* We should bind the task to the CPU */ -BUG_ON (raw_smp_processor_id () != cpu); -if ( !match_cpu (patch) )return -EINVAL ;
@@ -453,19 +447,16 @@ static bool_t check_final_patch_levels(unsigned int cpu)return 0 ; } -static int cpu_request_microcode (unsigned int cpu,const void *buf, -size_t bufsize) +static int cpu_request_microcode (const void *buf,size_t bufsize) {struct microcode_amd *mc_amd;size_t offset =0 ;int error =0 ;unsigned int current_cpu_id;unsigned int equiv_cpu_id; +unsigned int cpu =smp_processor_id ();const struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); -/* We should bind the task to the CPU */ -BUG_ON (cpu !=raw_smp_processor_id ()); - current_cpu_id =cpuid_eax (0x00000001 );if ( *(const uint32_t *)buf !=UCODE_MAGIC )
@@ -564,14 +555,14 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf, }/* Update cache if this patch covers current CPU */ -if (microcode_fits (new_patch->mc_amd, cpu) !=MIS_UCODE ) +if (microcode_fits (new_patch->mc_amd) !=MIS_UCODE )microcode_update_cache (new_patch);else microcode_free_patch (new_patch);if (match_cpu (microcode_get_cache ()) ) { - error =apply_microcode (cpu); + error =apply_microcode ();if ( error )break ; }
xen/arch/x86/microcode_intel.c +10 -18
@@ -96,13 +96,12 @@ struct extended_sigtable {/* serialize access to the physical write to MSR 0x79 */ static DEFINE_SPINLOCK (microcode_update_lock); -static int collect_cpu_info (unsigned int cpu_num,struct cpu_signature *csig) +static int collect_cpu_info (struct cpu_signature *csig) { +unsigned int cpu_num =smp_processor_id ();struct cpuinfo_x86 *c = &cpu_data[cpu_num];uint64_t msr_content; -BUG_ON (cpu_num !=smp_processor_id ()); -memset (csig,0 ,sizeof (*csig));if ( (c->x86_vendor !=X86_VENDOR_INTEL ) || (c->x86 <6 ) )
@@ -285,9 +284,9 @@ static enum microcode_match_result compare_patch(* return 1 - found update * return < 0 - error */ -static int get_matching_microcode (const void *mc,unsigned int cpu) +static int get_matching_microcode (const void *mc) { -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +struct cpu_signature *sig = &this_cpu (cpu_sig);const struct microcode_header_intel *mc_header = mc;unsigned long total_size =get_totalsize (mc_header);void *new_mc =xmalloc_bytes (total_size);
@@ -314,24 +313,21 @@ static int get_matching_microcode(const void *mc, unsigned int cpu)pr_debug ("microcode: CPU%d found a matching microcode update with" " version %#x (current=%#x)\n" , - cpu, mc_header->rev, sig->rev); +smp_processord_id (), mc_header->rev, sig->rev);return 1 ; } -static int apply_microcode (unsigned int cpu) +static int apply_microcode (void ) {unsigned long flags;uint64_t msr_content;unsigned int val[2 ];unsigned int cpu_num =raw_smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +struct cpu_signature *sig = &this_cpu (cpu_sig);const struct microcode_intel *mc_intel;const struct microcode_patch *patch =microcode_get_cache (); -/* We should bind the task to the CPU */ -BUG_ON (cpu_num != cpu); -if ( !match_cpu (patch) )return -EINVAL ;
@@ -396,22 +392,18 @@ static long get_next_ucode_from_buffer(void **mc, const u8 *buf,return offset + total_size; } -static int cpu_request_microcode (unsigned int cpu,const void *buf, -size_t size) +static int cpu_request_microcode (const void *buf,size_t size) {long offset =0 ;int error =0 ;void *mc; -/* We should bind the task to the CPU */ -BUG_ON (cpu !=raw_smp_processor_id ()); -while ( (offset =get_next_ucode_from_buffer (&mc, buf, size, offset)) >0 ) { error =microcode_sanity_check (mc);if ( error )break ; - error =get_matching_microcode (mc, cpu); + error =get_matching_microcode (mc);if ( error <0 )break ;/*
@@ -429,7 +421,7 @@ static int cpu_request_microcode(unsigned int cpu, const void *buf, error = offset;if ( !error &&match_cpu (microcode_get_cache ()) ) - error =apply_microcode (cpu); + error =apply_microcode ();return error; }
xen/arch/x86/smpboot.c +1 -1
@@ -364,7 +364,7 @@ void start_secondary(void *unused)if ( system_state <= SYS_STATE_smp_boot )early_microcode_update_cpu (false);else -microcode_resume_cpu (cpu); +microcode_resume_cpu ();/* * If MSR_SPEC_CTRL is available, apply Xen's default setting and discard
xen/include/asm-x86/microcode.h +3 -4
@@ -20,10 +20,9 @@ struct microcode_patch { };struct microcode_ops { -int (*cpu_request_microcode)(unsigned int cpu,const void *buf, -size_t size); -int (*collect_cpu_info)(unsigned int cpu,struct cpu_signature *csig); -int (*apply_microcode)(unsigned int cpu); +int (*cpu_request_microcode)(const void *buf,size_t size); +int (*collect_cpu_info)(struct cpu_signature *csig); +int (*apply_microcode)(void );int (*start_update)(void );void (*free_patch)(void *mc);bool (*match_cpu)(const struct microcode_patch *patch);
xen/include/asm-x86/processor.h +1 -1
@@ -568,7 +568,7 @@ int guest_wrmsr_xen(struct vcpu *v, uint32_t idx, uint64_t val);void microcode_set_module (unsigned int );int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void ),unsigned long len); -int microcode_resume_cpu (unsigned int cpu); +int microcode_resume_cpu (void );int early_microcode_update_cpu (bool start_update);int early_microcode_init (void );int microcode_init_intel (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 09/16] microcode: remove pointless 'cpu' parameter
Quoted 20 lines · Chao Gao
xen/arch/x86/microcode_amd.c +3
-3@@ -78,23 +78,23 @@ struct mpbhdr {static DEFINE_SPINLOCK (microcode_update_lock);/* See comment in start_update() for cases when this routine fails */ -static int collect_cpu_info (unsigned int cpu,struct cpu_signature *csig) +static int collect_cpu_info (struct cpu_signature *csig) { -struct cpuinfo_x86 *c = &cpu_data[cpu]; +struct cpuinfo_x86 *c = ¤t_cpu_data;memset (csig,0 ,sizeof (*csig));if ( (c->x86_vendor !=X86_VENDOR_AMD ) || (c->x86 <0x10 ) ) {printk (KERN_ERR "microcode: CPU%d not a capable AMD processor\n" , - cpu); +smp_processor_id ());return -EINVAL ;
xen/arch/x86/microcode_amd.c struct mpbhdr { · line 100
Quoted 10 lines
xen/arch/x86/microcode_amd.c +1
-1}rdmsrl (MSR_AMD_PATCHLEVEL , csig->rev);pr_debug ("microcode: CPU%d collect_cpu_info: patch_id=%#x\n" , - cpu, csig->rev); +smp_processor_id (), csig->rev);return 0 ; }
Argh - I'd been wrong saying "The only other use of "cpu" is in a pr_debug()" in a reply to v7. I had managed to overlook the use in the printk(). This suggests that the earlier solution was better, as now we have at least two smp_processor_id() in the function, in a debug build three of them. I'm sorry.
preferably with the change above moved back to its v7 shape, but given this was my mistake I won't insist. If there was no need for v9, then this could also be done while committing.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 10/16 microcode/amd: call svm_host_osvw_init() in common code
In reply to Chao GaoIntroduce a vendor hook, .end_update, for svm_host_osvw_init(). The hook function is called on each cpu after loading an update. It is a preparation for spliting out apply_microcode() from cpu_request_microcode().
---
Changes in v8:
- new
--- xen/arch/x86/microcode.c | 3 +++ xen/arch/x86/microcode_amd.c | 21 ++++++++++----------- xen/include/asm-x86/microcode.h | 1 + 3 files changed, 14 insertions(+), 11 deletions(-)
xen/arch/x86/microcode.c +3 -0
@@ -277,6 +277,9 @@ static long do_microcode_update(void *_info)if ( error ) info->error = error; +if ( microcode_ops->end_update ) + microcode_ops->end_update (); + info->cpu =cpumask_next (info->cpu, &cpu_online_map);if ( info->cpu < nr_cpu_ids )return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info);
xen/arch/x86/microcode_amd.c +10 -11
@@ -600,10 +600,6 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)xfree (mc_amd); out: -#if CONFIG_HVM -svm_host_osvw_init (); -#endif -/* * In some cases we may return an error even if processor's microcode has * been updated. For example, the first patch in a container file is loaded
@@ -617,13 +613,8 @@ static int start_update(void) {#if CONFIG_HVM /* -* We assume here that svm_host_osvw_init() will be called on each cpu (from -* cpu_request_microcode()). -* -* Note that if collect_cpu_info() returns an error then -* cpu_request_microcode() will not invoked thus leaving OSVW bits not -* updated. Currently though collect_cpu_info() will not fail on processors -* supporting OSVW so we will not deal with this possibility. +* svm_host_osvw_init() will be called on each cpu by calling '.end_update' +* in common code. */ svm_host_osvw_reset ();#endif
@@ -631,11 +622,19 @@ static int start_update(void)return 0 ; } +static void end_update (void ) +{ +#if CONFIG_HVM +svm_host_osvw_init (); +#endif +} +static const struct microcode_ops microcode_amd_ops = { .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, .start_update = start_update, + .end_update = end_update, .free_patch = free_patch, .compare_patch = compare_patch, .match_cpu = match_cpu,
xen/include/asm-x86/microcode.h +1 -0
@@ -24,6 +24,7 @@ struct microcode_ops {int (*collect_cpu_info)(struct cpu_signature *csig);int (*apply_microcode)(void );int (*start_update)(void ); +void (*end_update)(void );void (*free_patch)(void *mc);bool (*match_cpu)(const struct microcode_patch *patch); enum microcode_match_result (*compare_patch)(
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 10/16] microcode/amd: call svm_host_osvw_init() in common code
xen/arch/x86/microcode.c static long do_microcode_update(void *_info) · line 285
Quoted 12 lines · Chao Gao
xen/arch/x86/microcode.c +3
-0@@ -277,6 +277,9 @@ static long do_microcode_update(void *_info)if ( error ) info->error = error; +if ( microcode_ops->end_update ) + microcode_ops->end_update (); + info->cpu =cpumask_next (info->cpu, &cpu_online_map);if ( info->cpu < nr_cpu_ids )return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info);
This being the only change in this file - don't you also need to alter the early ucode loading path?
xen/arch/x86/microcode.c static int start_update(void) · line 630
Quoted 10 lines
xen/arch/x86/microcode.c +6
-0@@ -631,11 +622,19 @@ static int start_update(void)return 0 ; } +static void end_update (void ) +{ +#if CONFIG_HVM +svm_host_osvw_init (); +#endif +}
Instead of leaving an empty function in the !HVM case, ...
xen/arch/x86/microcode.c static int start_update(void) · line 636
Quoted 6 lines
xen/arch/x86/microcode.c +1
-0static const struct microcode_ops microcode_amd_ops = { .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, .start_update = start_update, + .end_update = end_update,
... could you please leave this pointer uninitialized (i.e. NULL) in that case?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 10/16] microcode/amd: call svm_host_osvw_init() in common code
Quoted 7 lines · Jan Beulich
Quoted 6 lines · Chao Gao
xen/arch/x86/microcode.c +0
-0@@ -277,6 +277,9 @@ static long do_microcode_update(void *_info)if ( error ) info->error = error;
Quoted 9 lines
xen/arch/x86/microcode.c static long do_microcode_update(void *_info) · line 285
Quoted 6 lines
xen/arch/x86/microcode.c +3
-0+if ( microcode_ops->end_update ) + microcode_ops->end_update (); + info->cpu =cpumask_next (info->cpu, &cpu_online_map);if ( info->cpu < nr_cpu_ids )return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info);This being the only change in this file - don't you also need to alter the early ucode loading path?
Yes. I should have.
Quoted 21 lines
xen/arch/x86/microcode.c static int start_update(void) · line 630
Quoted 11 lines
xen/arch/x86/microcode.c +6
-0@@ -631,11 +622,19 @@ static int start_update(void)return 0 ; } +static void end_update (void ) +{ +#if CONFIG_HVM +svm_host_osvw_init (); +#endif +}Instead of leaving an empty function in the !HVM case, ...
xen/arch/x86/microcode.c static int start_update(void) · line 636
Quoted 6 lines
xen/arch/x86/microcode.c +1
-0static const struct microcode_ops microcode_amd_ops = { .cpu_request_microcode = cpu_request_microcode, .collect_cpu_info = collect_cpu_info, .apply_microcode = apply_microcode, .start_update = start_update, + .end_update = end_update,
Quoted 2 lines
... could you please leave this pointer uninitialized (i.e. NULL) in that case?
Will do.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 11/16 microcode: pass a patch pointer to apply_microcode()
In reply to Chao Gaoapply_microcode()'s always loading the cached ucode patch forces a patch to be stored before being loading. Make apply_microcode() accept a patch pointer to remove the limitation so that a patch can be stored after a successful loading.
---
Changes in v8:
- new
--- xen/arch/x86/microcode.c | 2 +- xen/arch/x86/microcode_amd.c | 5 ++--- xen/arch/x86/microcode_intel.c | 5 ++--- xen/include/asm-x86/microcode.h | 2 +- 4 files changed, 6 insertions(+), 8 deletions(-)
xen/arch/x86/microcode.c +1 -1
@@ -208,7 +208,7 @@ int microcode_resume_cpu(void) err = microcode_ops->collect_cpu_info (sig);if (likely (!err) ) - err = microcode_ops->apply_microcode (); + err = microcode_ops->apply_microcode (microcode_cache);spin_unlock (µcode_mutex);return err;
xen/arch/x86/microcode_amd.c +2 -3
@@ -247,7 +247,7 @@ static enum microcode_match_result compare_patch(return MIS_UCODE ; } -static int apply_microcode (void ) +static int apply_microcode (const struct microcode_patch *patch) {unsigned long flags;uint32_t rev;
@@ -255,7 +255,6 @@ static int apply_microcode(void)unsigned int cpu =smp_processor_id ();struct cpu_signature *sig = &per_cpu (cpu_sig, cpu);const struct microcode_header_amd *hdr; -const struct microcode_patch *patch =microcode_get_cache ();if ( !match_cpu (patch) )return -EINVAL ;
@@ -562,7 +561,7 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)if (match_cpu (microcode_get_cache ()) ) { - error =apply_microcode (); + error =apply_microcode (microcode_get_cache ());if ( error )break ; }
xen/arch/x86/microcode_intel.c +2 -3
@@ -318,7 +318,7 @@ static int get_matching_microcode(const void *mc)return 1 ; } -static int apply_microcode (void ) +static int apply_microcode (const struct microcode_patch *patch) {unsigned long flags;uint64_t msr_content;
@@ -326,7 +326,6 @@ static int apply_microcode(void)unsigned int cpu_num =raw_smp_processor_id ();struct cpu_signature *sig = &this_cpu (cpu_sig);const struct microcode_intel *mc_intel; -const struct microcode_patch *patch =microcode_get_cache ();if ( !match_cpu (patch) )return -EINVAL ;
@@ -421,7 +420,7 @@ static int cpu_request_microcode(const void *buf, size_t size) error = offset;if ( !error &&match_cpu (microcode_get_cache ()) ) - error =apply_microcode (); + error =apply_microcode (microcode_get_cache ());return error; }
xen/include/asm-x86/microcode.h +1 -1
@@ -22,7 +22,7 @@ struct microcode_patch {struct microcode_ops {int (*cpu_request_microcode)(const void *buf,size_t size);int (*collect_cpu_info)(struct cpu_signature *csig); -int (*apply_microcode)(void ); +int (*apply_microcode)(const struct microcode_patch *patch);int (*start_update)(void );void (*end_update)(void );void (*free_patch)(void *mc);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 11/16] microcode: pass a patch pointer to apply_microcode()
Quoted 6 lines · Chao Gao
apply_microcode()'s always loading the cached ucode patch forces a patch to be stored before being loading. Make
apply_microcode()accept a patch pointer to remove the limitation so that a patch can be stored after a successful loading.Signed-off-by Chao Gao <[email protected]>
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 12/16 microcode: split out apply_microcode() from cpu_request_microcode()
In reply to Chao GaoDuring late microcode loading, apply_microcode() is invoked in cpu_request_microcode(). To make late microcode update more reliable, we want to put the apply_microcode() into stop_machine context. So we split out it from cpu_request_microcode(). In general, for both early loading on BSP and late loading, cpu_request_microcode() is called first to get the matching microcode update contained by the blob and then apply_microcode() is invoked explicitly on each cpu in common code.
Given that all CPUs are supposed to have the same signature, parsing microcode only needs to be done once. So cpu_request_microcode() is also moved out of microcode_update_cpu().
In some cases (e.g. a broken bios), the system may have multiple revisions of microcode update. So we would try to load a microcode update as long as it covers current cpu. And if a cpu loads this patch successfully, the patch would be stored into the patch cache.
---
Changes in v8:
- divide the original patch into three patches to improve readability
- load an update on each cpu as long as the update covers current cpu
- store an update after the first successful loading on a CPU
- Make sure the current CPU (especially pf value) is covered by updates.
changes in v7:
- to handle load failure, unvalidated patches won't be cached. They are passed as function arguments. So if update failed, we needn't any cleanup to microcode cache.
--- xen/arch/x86/microcode.c | 181 ++++++++++++++++++++++++++++------------ xen/arch/x86/microcode_amd.c | 38 +++++---- xen/arch/x86/microcode_intel.c | 70 ++++++++-------- xen/include/asm-x86/microcode.h | 5 +- 4 files changed, 186 insertions(+), 108 deletions(-)
xen/arch/x86/microcode.c +129 -52
@@ -189,12 +189,20 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error; -char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *microcode_parse_blob (const char *buf, +uint32_t len) +{ +if (likely (!microcode_ops->collect_cpu_info (&this_cpu (cpu_sig))) ) +return microcode_ops->cpu_request_microcode (buf, len); + +return NULL ; +}int microcode_resume_cpu (void ) {
@@ -220,13 +228,6 @@ void microcode_free_patch(struct microcode_patch *microcode_patch)xfree (microcode_patch); } -const struct microcode_patch *microcode_get_cache (void ) -{ -ASSERT (spin_is_locked (µcode_mutex)); - -return microcode_cache; -} -/* Return true if cache gets updated. Otherwise, return false */ bool microcode_update_cache (struct microcode_patch *patch) {
@@ -250,49 +251,88 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); + +if (unlikely (err) ) +return err;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); +if ( patch ) + { +/* +* If a patch is specified, it should has newer revision than +* that of the patch cached. +*/ +if ( microcode_cache && + microcode_ops->compare_patch (patch, microcode_cache) !=NEW_UCODE ) + { +spin_unlock (µcode_mutex); +return -EINVAL ; + } + } +else if ( microcode_cache ) + patch = microcode_cache; +else +/* No patch to update */ + err = -ENOENT ; + +if ( patch ) + { + err = microcode_ops->apply_microcode (patch); +/* clean up patch cache if we failed to load the cached patch */ +if ( patch == microcode_cache && err == -EIO ) + { +microcode_free_patch (microcode_cache); + microcode_cache =NULL ; + } + } +spin_unlock (µcode_mutex);return err; } -static long do_microcode_update (void *_info) +static long do_microcode_update (void *patch) { -struct microcode_info *info = _info; -int error; - -BUG_ON (info->cpu !=smp_processor_id ()); +unsigned int cpu; - error =microcode_update_cpu (info->buffer, info->buffer_size); -if ( error ) - info->error = error; +/* store the patch after a successful loading */ +if ( !microcode_update_cpu (patch) && patch ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); + patch =NULL ; + }if ( microcode_ops->end_update ) microcode_ops->end_update (); - info->cpu =cpumask_next (info->cpu, &cpu_online_map); -if ( info->cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); + cpu =cpumask_next (smp_processor_id (), &cpu_online_map); +if ( cpu < nr_cpu_ids ) +return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + +/* Free the patch if no CPU has loaded it successfully. */ +if ( patch ) +microcode_free_patch (patch); - error = info->error; -xfree (info); -return error; +return 0 ; }int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void) buf,unsigned long len) {int ret; -struct microcode_info *info; +void *buffer; +struct microcode_patch *patch;if ( len != (uint32_t )len )return -E2BIG ;
@@ -300,32 +340,44 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)if ( microcode_ops ==NULL )return -EINVAL ; - info =xmalloc_bytes (sizeof (*info) + len); -if ( info ==NULL ) + buffer =xmalloc_bytes (len); +if ( !buffer )return -ENOMEM ; - ret =copy_from_guest (info->buffer, buf, len); -if ( ret !=0 ) +if (copy_from_guest (buffer, buf, len) ) { -xfree (info); -return ret; + ret = -EFAULT ; + goto free; } - info->buffer_size = len; - info->error =0 ; - info->cpu =cpumask_first (&cpu_online_map); -if ( microcode_ops->start_update ) { ret = microcode_ops->start_update ();if ( ret !=0 ) - { -xfree (info); -return ret; - } + goto free; + } + + patch =microcode_parse_blob (buffer, len); +if (IS_ERR (patch) ) + { + ret =PTR_ERR (patch); +printk (XENLOG_INFO "Parsing microcode blob error %d\n" , ret); + goto free; } -return continue_hypercall_on_cpu (info->cpu, do_microcode_update, info); +if ( !patch ) + { +printk (XENLOG_INFO "No ucode found. Update aborted!\n" ); + ret = -EINVAL ; + goto free; + } + + ret =continue_hypercall_on_cpu (cpumask_first (&cpu_online_map), + do_microcode_update, patch); + + free: +xfree (buffer); +return ret; }static int __init microcode_init (void )
@@ -372,15 +424,40 @@ int __init early_microcode_update_cpu(bool start_update) microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); +if ( !start_update ) +return microcode_update_cpu (NULL ); +if ( data ) { -if ( start_update && microcode_ops->start_update ) +struct microcode_patch *patch; + +if ( microcode_ops->start_update ) rc = microcode_ops->start_update ();if ( rc )return rc; -return microcode_update_cpu (data, len); + patch =microcode_parse_blob (data, len); +if (IS_ERR (patch) ) + { +printk (XENLOG_INFO "Parsing microcode blob error %ld\n" , +PTR_ERR (patch)); +return PTR_ERR (patch); + } + +if ( !patch ) + { +printk (XENLOG_INFO "No ucode found. Update aborted!\n" ); +return -EINVAL ; + } + +spin_lock (µcode_mutex); + rc =microcode_update_cache (patch); +spin_unlock (µcode_mutex); + +ASSERT (rc); + +return microcode_update_cpu (NULL ); }else return -ENOMEM ;
xen/arch/x86/microcode_amd.c +20 -18
@@ -446,9 +446,11 @@ static bool_t check_final_patch_levels(unsigned int cpu)return 0 ; } -static int cpu_request_microcode (const void *buf,size_t bufsize) +static struct microcode_patch *cpu_request_microcode (const void *buf, +size_t bufsize) {struct microcode_amd *mc_amd; +struct microcode_patch *patch =NULL ;size_t offset =0 ;int error =0 ;unsigned int current_cpu_id;
@@ -553,19 +555,22 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)break ; } -/* Update cache if this patch covers current CPU */ -if (microcode_fits (new_patch->mc_amd) !=MIS_UCODE ) -microcode_update_cache (new_patch); -else -microcode_free_patch (new_patch); - -if (match_cpu (microcode_get_cache ()) ) +/* +* If the new patch covers current CPU, compare patches and store the +* one with higher revision. +*/ +if ( (microcode_fits (new_patch->mc_amd) !=MIS_UCODE ) && + (!patch || (compare_patch (new_patch, patch) ==NEW_UCODE )) ) { - error =apply_microcode (microcode_get_cache ()); -if ( error ) -break ; +struct microcode_patch *tmp = patch; + + patch = new_patch; + new_patch = tmp; } +if ( new_patch ) +microcode_free_patch (new_patch); +if ( offset >= bufsize )break ;
@@ -599,13 +604,10 @@ static int cpu_request_microcode(const void *buf, size_t bufsize)xfree (mc_amd); out: -/* -* In some cases we may return an error even if processor's microcode has -* been updated. For example, the first patch in a container file is loaded -* successfully but subsequent container file processing encounters a -* failure. -*/ -return error; +if ( error && !patch ) + patch =ERR_PTR (error); + +return patch; }static int start_update (void )
xen/arch/x86/microcode_intel.c +35 -35
112 lines not on this page · raw message
xen/include/asm-x86/microcode.h +2 -3
@@ -20,7 +20,8 @@ struct microcode_patch { };struct microcode_ops { -int (*cpu_request_microcode)(const void *buf,size_t size); +struct microcode_patch *(*cpu_request_microcode)(const void *buf, +size_t size);int (*collect_cpu_info)(struct cpu_signature *csig);int (*apply_microcode)(const struct microcode_patch *patch);int (*start_update)(void );
@@ -41,8 +42,6 @@ struct cpu_signature { DECLARE_PER_CPU(struct cpu_signature, cpu_sig);extern const struct microcode_ops *microcode_ops; -const struct microcode_patch *microcode_get_cache (void ); -bool microcode_update_cache (struct microcode_patch *patch);void microcode_free_patch (struct microcode_patch *patch);#endif /* ASM_X86__MICROCODE_H */
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 12/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 10 lines · Chao Gao
xen/arch/x86/microcode.c +0
-4@@ -189,12 +189,20 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error;
xen/arch/x86/microcode.c static DEFINE_SPINLOCK(microcode_mutex); · line 199
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *microcode_parse_blob (const char *buf, +uint32_t len)
Btw - you'd have less issues with line length if you omitted the "microcode_" prefix from static functions.
Quoted 24 lines
xen/arch/x86/microcode.c +11
-5@@ -250,49 +251,88 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); + +if (unlikely (err) ) +return err;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (sig);
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 276
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); +if ( patch ) + { +/* +* If a patch is specified, it should has newer revision than +* that of the patch cached. +*/ +if ( microcode_cache && + microcode_ops->compare_patch (patch, microcode_cache) !=NEW_UCODE )
While I see that you've taken care of the one case in Intel specific code, this is again a case where I don't think you can validly call this hook in the Intel case. Albeit maybe it is okay, provided that the caller has already verified it against the CPU signature. Then again I wonder why this check gets done here rather than in the caller (next to that other check) anyway. Afaics this way you'd also avoid re-checking on every CPU a CPU-independent property.
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 308
Quoted 13 lines
xen/arch/x86/microcode.c +3
-8-static long do_microcode_update (void *_info) +static long do_microcode_update (void *patch) { -struct microcode_info *info = _info; -int error; - -BUG_ON (info->cpu !=smp_processor_id ()); +unsigned int cpu; - error =microcode_update_cpu (info->buffer, info->buffer_size); -if ( error ) - info->error = error; +/* store the patch after a successful loading */
Nit: Comments should start with an uppercase letter.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 12/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 60 lines · Jan Beulich
Quoted 10 lines · Chao Gao
xen/arch/x86/microcode.c +0
-4@@ -189,12 +189,20 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error;xen/arch/x86/microcode.c static DEFINE_SPINLOCK(microcode_mutex); · line 199
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *microcode_parse_blob (const char *buf, +uint32_t len)Btw - you'd have less issues with line length if you omitted the "
microcode_" prefix from static functions.Quoted 24 lines
xen/arch/x86/microcode.c +11
-5@@ -250,49 +251,88 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); + +if (unlikely (err) ) +return err;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (sig);xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 276
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); +if ( patch ) + { +/* +* If a patch is specified, it should has newer revision than +* that of the patch cached. +*/ +if ( microcode_cache && + microcode_ops->compare_patch (patch, microcode_cache) !=NEW_UCODE )
Quoted 7 lines
While I see that you've taken care of the one case in Intel specific code, this is again a case where I don't think you can validly call this hook in the Intel case. Albeit maybe it is okay, provided that the caller has already verified it against the CPU signature. Then again I wonder why this check gets done here rather than in the caller (next to that other check) anyway. Afaics this way you'd also avoid re-checking on every CPU a CPU-independent property.
As said in an earlier reply to patch 6, ->compare_patch can be simplified a lot. Do you think it is fine to call it here with that change?
About avoiding re-checking, we should check it with "microcode_mutex" held otherwise we cannot ensure nobody is updating the cache. If we want to avoid re-checking, then this lock is held for a long time from loading on the first core to the last core. And also for early loading and late loading, we pass 'NULL' to this function on following CPUs after the first successful loading. I am afraid that there is no redundant checking.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 12/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 69 lines · Chao Gao
Quoted 60 lines · Jan Beulich
Quoted 10 lines · Chao Gao
xen/arch/x86/microcode.c +0
-4@@ -189,12 +189,20 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error;xen/arch/x86/microcode.c static DEFINE_SPINLOCK(microcode_mutex); · line 199
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *microcode_parse_blob (const char *buf, +uint32_t len)Btw - you'd have less issues with line length if you omitted the "
microcode_" prefix from static functions.Quoted 24 lines
xen/arch/x86/microcode.c +11
-5@@ -250,49 +251,88 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); + +if (unlikely (err) ) +return err;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (sig);xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 276
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); +if ( patch ) + { +/* +* If a patch is specified, it should has newer revision than +* that of the patch cached. +*/ +if ( microcode_cache && + microcode_ops->compare_patch (patch, microcode_cache) !=NEW_UCODE )Quoted 7 lines
While I see that you've taken care of the one case in Intel specific code, this is again a case where I don't think you can validly call this hook in the Intel case. Albeit maybe it is okay, provided that the caller has already verified it against the CPU signature. Then again I wonder why this check gets done here rather than in the caller (next to that other check) anyway. Afaics this way you'd also avoid re-checking on every CPU a CPU-independent property.
Quoted 3 lines
As said in an earlier reply to patch 6, ->compare_patch can be simplified a lot. Do you think it is fine to call it here with that change?
As said there - yes, this looks to be an option.
Quoted 6 lines
About avoiding re-checking, we should check it with "
microcode_mutex" held otherwise we cannot ensure nobody is updating the cache. If we want to avoid re-checking, then this lock is held for a long time from loading on the first core to the last core. And also for early loading and late loading, we pass 'NULL' to this function on following CPUs after the first successful loading. I am afraid that there is no redundant checking.
There should not be any updating of the cache while one (system-wide) ucode load operation is in progress, or else you risk leaving the system in a "mixed ucode versions" state in the end. As said, also from a logical flow-of-events perspective it seems to me that it should be the caller to validate applicability of the patch before calling here. But as also said, I may as well be missing some important aspect here.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 12/16] microcode: split out apply_microcode() from cpu_request_microcode()
Quoted 83 lines · Jan Beulich
Quoted 69 lines · Chao Gao
Quoted 60 lines · Jan Beulich
Quoted 10 lines · Chao Gao
xen/arch/x86/microcode.c +0
-4@@ -189,12 +189,20 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig); -struct microcode_info { -unsigned int cpu; -uint32_t buffer_size; -int error;xen/arch/x86/microcode.c static DEFINE_SPINLOCK(microcode_mutex); · line 199
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-char buffer[1 ]; -}; +/* +* Return a patch that covers current CPU. If there are multiple patches, +* return the one with the highest revision number. Return error If no +* patch is found and an error occurs during the parsing process. Otherwise +* return NULL. +*/ +static struct microcode_patch *microcode_parse_blob (const char *buf, +uint32_t len)Btw - you'd have less issues with line length if you omitted the "
microcode_" prefix from static functions.Quoted 24 lines
xen/arch/x86/microcode.c +11
-5@@ -250,49 +251,88 @@ bool microcode_update_cache(struct microcode_patch *patch)return true; } -static int microcode_update_cpu (const void *buf,size_t size) +/* +* Load a microcode update to current CPU. +* +* If no patch is provided, the cached patch will be loaded. Microcode update +* during APs bringup and CPU resuming falls into this case. +*/ +static int microcode_update_cpu (const struct microcode_patch *patch) { -int err; -unsigned int cpu =smp_processor_id (); -struct cpu_signature *sig = &per_cpu (cpu_sig, cpu); +int err = microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); + +if (unlikely (err) ) +return err;spin_lock (µcode_mutex); - err = microcode_ops->collect_cpu_info (sig);xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 276
Quoted 10 lines
xen/arch/x86/microcode.c +8
-2-if (likely (!err) ) - err = microcode_ops->cpu_request_microcode (buf, size); +if ( patch ) + { +/* +* If a patch is specified, it should has newer revision than +* that of the patch cached. +*/ +if ( microcode_cache && + microcode_ops->compare_patch (patch, microcode_cache) !=NEW_UCODE )Quoted 7 lines
While I see that you've taken care of the one case in Intel specific code, this is again a case where I don't think you can validly call this hook in the Intel case. Albeit maybe it is okay, provided that the caller has already verified it against the CPU signature. Then again I wonder why this check gets done here rather than in the caller (next to that other check) anyway. Afaics this way you'd also avoid re-checking on every CPU a CPU-independent property.
Quoted 3 lines
As said in an earlier reply to patch 6, ->compare_patch can be simplified a lot. Do you think it is fine to call it here with that change?
As said there - yes, this looks to be an option.
Quoted 6 lines
About avoiding re-checking, we should check it with "
microcode_mutex" held otherwise we cannot ensure nobody is updating the cache. If we want to avoid re-checking, then this lock is held for a long time from loading on the first core to the last core. And also for early loading and late loading, we pass 'NULL' to this function on following CPUs after the first successful loading. I am afraid that there is no redundant checking.
Quoted 3 lines
There should not be any updating of the cache while one (system-wide) ucode load operation is in progress, or else you risk leaving the system in a "mixed ucode versions" state in the end. As said, also
Yes. I agree.
Quoted 3 lines
from a logical flow-of-events perspective it seems to me that it should be the caller to validate applicability of the patch before calling here.
Maybe we can just remove this check. The check is to avoid loading an older update than the cached one (an error is returned if it is the case). But actually, ->apply_microcode() will ensure the provided update's revision is newer than current update revision by calling match_cpu(). So probably this check is redundant.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 13/16 microcode: unify loading update during CPU resuming and AP wakeup
In reply to Chao GaoBoth are loading the cached patch. Since APs call the unified function, microcode_update_one(), during wakeup, the 'start_update' parameter which originally used to distinguish BSP and APs is redundant. So remove this parameter.
---
Changes in v8:
- split out from the previous patch
--- xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/microcode.c | 36 +++++++++++------------------------- xen/arch/x86/smpboot.c | 5 +---- xen/include/asm-x86/processor.h | 4 ++-- 4 files changed, 15 insertions(+), 32 deletions(-)
xen/arch/x86/acpi/power.c +1 -1
@@ -253,7 +253,7 @@ static int enter_state(u32 state)console_end_sync (); -microcode_resume_cpu (); +microcode_update_one ();if ( !recheck_cpu_features (0 ) )panic ("Missing previously available feature(s)\n" );
xen/arch/x86/microcode.c +11 -25
@@ -204,24 +204,6 @@ static struct microcode_patch *microcode_parse_blob(const char *buf,return NULL ; } -int microcode_resume_cpu (void ) -{ -int err; -struct cpu_signature *sig = &this_cpu (cpu_sig); - -if ( !microcode_ops ) -return 0 ; - -spin_lock (µcode_mutex); - - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->apply_microcode (microcode_cache); -spin_unlock (µcode_mutex); - -return err; -} -void microcode_free_patch (struct microcode_patch *microcode_patch) { microcode_ops->free_patch (microcode_patch->mc);
@@ -402,7 +384,16 @@ static int __init microcode_init(void) }__initcall (microcode_init); -int __init early_microcode_update_cpu (bool start_update) +/* Load a cached update to current cpu */ +int microcode_update_one (void ) +{ +return microcode_ops ?microcode_update_cpu (NULL ) :0 ; +} + +/* +* BSP calls this function to parse ucode blob and then apply an update. +*/ +int __init early_microcode_update_cpu (void ) {int rc =0 ;void *data =NULL ;
@@ -422,11 +413,6 @@ int __init early_microcode_update_cpu(bool start_update) data =bootstrap_map (&ucode_mod); } - microcode_ops->collect_cpu_info (&this_cpu (cpu_sig)); - -if ( !start_update ) -return microcode_update_cpu (NULL ); -if ( data ) {struct microcode_patch *patch;
@@ -480,7 +466,7 @@ int __init early_microcode_init(void) microcode_ops->collect_cpu_info (&this_cpu (cpu_sig));if ( ucode_mod.mod_end || ucode_blob.size ) - rc =early_microcode_update_cpu (true); + rc =early_microcode_update_cpu (); }return rc;
xen/arch/x86/smpboot.c +1 -4
@@ -361,10 +361,7 @@ void start_secondary(void *unused)initialize_cpu_data (cpu); -if ( system_state <= SYS_STATE_smp_boot ) -early_microcode_update_cpu (false); -else -microcode_resume_cpu (); +microcode_update_one ();/* * If MSR_SPEC_CTRL is available, apply Xen's default setting and discard
xen/include/asm-x86/processor.h +2 -2
@@ -568,9 +568,9 @@ int guest_wrmsr_xen(struct vcpu *v, uint32_t idx, uint64_t val);void microcode_set_module (unsigned int );int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void ),unsigned long len); -int microcode_resume_cpu (void ); -int early_microcode_update_cpu (bool start_update); +int early_microcode_update_cpu (void );int early_microcode_init (void ); +int microcode_update_one (void );int microcode_init_intel (void );int microcode_init_amd (void );
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 13/16] microcode: unify loading update during CPU resuming and AP wakeup
Quoted 59 lines · Chao Gao
Both are loading the cached patch. Since APs call the unified function,
microcode_update_one(), during wakeup, the 'start_update' parameter which originally used to distinguish BSP and APs is redundant. So remove this parameter.Signed-off-by Chao Gao <[email protected]>---
Changes in v8:
- split out from the previous patch--- xen/arch/x86/acpi/power.c | 2 +- xen/arch/x86/microcode.c | 36 +++++++++++------------------------- xen/arch/x86/smpboot.c | 5 +---- xen/include/asm-x86/processor.h | 4 ++-- 4 files changed, 15 insertions(+), 32 deletions(-)xen/arch/x86/acpi/power.c +1
-1@@ -253,7 +253,7 @@ static int enter_state(u32 state)console_end_sync (); -microcode_resume_cpu (); +microcode_update_one ();if ( !recheck_cpu_features (0 ) )panic ("Missing previously available feature(s)\n" );xen/arch/x86/microcode.c +0
-18@@ -204,24 +204,6 @@ static struct microcode_patch *microcode_parse_blob(const char *buf,return NULL ; } -int microcode_resume_cpu (void ) -{ -int err; -struct cpu_signature *sig = &this_cpu (cpu_sig); - -if ( !microcode_ops ) -return 0 ; - -spin_lock (µcode_mutex); - - err = microcode_ops->collect_cpu_info (sig); -if (likely (!err) ) - err = microcode_ops->apply_microcode (microcode_cache); -spin_unlock (µcode_mutex); - -return err; -} -void microcode_free_patch (struct microcode_patch *microcode_patch) { microcode_ops->free_patch (microcode_patch->mc);
xen/arch/x86/microcode.c static int __init microcode_init(void) · line 391
Quoted 9 lines
xen/arch/x86/microcode.c +5
-1@@ -402,7 +384,16 @@ static int __init microcode_init(void) }__initcall (microcode_init); -int __init early_microcode_update_cpu (bool start_update) +/* Load a cached update to current cpu */ +int microcode_update_one (void ) +{ +return microcode_ops ?microcode_update_cpu (NULL ) :0 ; +}
With both callers ignoring the return value, I wonder if the function should return void. Else it might be better (but I'm not entirely certain) for it to return -EOPNOTSUPP rather than 0.
xen/arch/x86/microcode.c static int __init microcode_init(void) · line 395
Quoted 3 lines
xen/arch/x86/microcode.c +3
-0+/* +* BSP calls this function to parse ucode blob and then apply an update. +*/
This is a single line comment, and hence wants its style changed accordingly.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 14/16 x86/microcode: Synchronize late microcode loading
In reply to Chao GaoThis patch ports microcode improvement patches from linux kernel.
Before you read any further: the early loading method is still the preferred one and you should always do that. The following patch is improving the late loading mechanism for long running jobs and cloud use cases.
Gather all cores and serialize the microcode update on them by doing it one-by-one to make the late update process as reliable as possible and avoid potential issues caused by the microcode update.
---
Changes in v8:
- to support blocking #NMI handling during loading ucode
* introduce a flag, 'loading_state', to mark the start or end of ucode loading.
* use a bitmap for cpu callin since if cpu may stay in #NMI handling, there are two places for a cpu to call in. bitmap won't be counted twice.
* don't wait for all CPUs callout, just wait for CPUs that perform the update. We have to do this because some threads may be stuck in NMI handling (where cannot reach the rendezvous).
- emit a warning if the system stays in stop_machine context for more than 1s
- comment that rdtsc is fine while loading an update
- use cmpxchg() to avoid panic being called on multiple CPUs
- Propagate revision number to other threads
- refine comments and prompt messages
Changes in v7:
- Check whether 'timeout' is 0 rather than "<=0" since it is unsigned int.
- reword the comment above microcode_update_cpu() to clearly state that one thread per core should do the update.
--- xen/arch/x86/microcode.c | 229 ++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 207 insertions(+), 22 deletions(-)
xen/arch/x86/microcode.c +207 -22
@@ -30,18 +30,41 @@#include <xen/smp.h> #include <xen/softirq.h> #include <xen/spinlock.h> +#include <xen/stop_machine.h> #include <xen/tasklet.h> #include <xen/guest_access.h> #include <xen/earlycpio.h> +#include <xen/watchdog.h> +#include <asm/delay.h> #include <asm/msr.h> #include <asm/processor.h> #include <asm/setup.h> #include <asm/microcode.h> +/* +* Before performing a late microcode update on any thread, we +* rendezvous all cpus in stop_machine context. The timeout for +* waiting for cpu rendezvous is 30ms. It is the timeout used by +* live patching +*/ +#define MICROCODE_CALLIN_TIMEOUT_US 30000 + +/* +* Timeout for each thread to complete update is set to 1s. It is a +* conservative choice considering all possible interference. +*/ +#define MICROCODE_UPDATE_TIMEOUT_US 1000000 +static module_t __initdata ucode_mod;static signed int __initdata ucode_mod_idx;static bool_t __initdata ucode_mod_forced; +static unsigned int nr_cores; +static enum { +LOADING_EXITED , +LOADING_ENTERED , +LOADING_ABORTED , +} loading_state;/* * If we scan the initramfs.cpio for the early microcode code
@@ -190,6 +213,16 @@ static DEFINE_SPINLOCK(microcode_mutex); DEFINE_PER_CPU(struct cpu_signature, cpu_sig);/* +* Count the CPUs that have entered, exited the rendezvous and succeeded in +* microcode update during late microcode update respectively. +* +* Note that a bitmap is used for callin to allow cpu to set a bit multiple +* times. It is required to do busy-loop in #NMI handling. +*/ +static cpumask_t cpu_callin_map; +static atomic_t cpu_out, cpu_updated; + +/* * Return a patch that covers current CPU. If there are multiple patches, * return the one with the highest revision number. Return error If no * patch is found and an error occurs during the parsing process. Otherwise
@@ -234,6 +267,35 @@ bool microcode_update_cache(struct microcode_patch *patch) }/* +* Wait for a condition to be met with a timeout (us). +*/ +static int wait_for_condition (int (*func)(void *data),void *data, +unsigned int timeout) +{ +while ( !func (data) ) + { +if ( !timeout-- ) + { +printk ("CPU%u: Timeout in %s\n" ,smp_processor_id (), __func__); +return -EBUSY ; + } +udelay (1 ); + } + +return 0 ; +} + +static int wait_cpu_callin (void *nr) +{ +return cpumask_weight (&cpu_callin_map) >= (unsigned long )nr; +} + +static int wait_cpu_callout (void *nr) +{ +return atomic_read (&cpu_out) >= (unsigned long )nr; +} + +/* * Load a microcode update to current CPU. * * If no patch is provided, the cached patch will be loaded. Microcode update
@@ -283,37 +345,105 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static int do_microcode_update (void *patch) { -unsigned int cpu; +unsigned int cpu =smp_processor_id (); +unsigned int cpu_nr =num_online_cpus (); +int ret; -/* store the patch after a successful loading */ -if ( !microcode_update_cpu (patch) && patch ) +/* Mark loading an ucode is in progress */ +cmpxchg (&loading_state,LOADING_EXITED ,LOADING_ENTERED ); +cpumask_set_cpu (cpu, &cpu_callin_map); + ret =wait_for_condition (wait_cpu_callin, (void *)(unsigned long )cpu_nr, +MICROCODE_CALLIN_TIMEOUT_US ); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +cmpxchg (&loading_state,LOADING_ENTERED ,LOADING_ABORTED ); +return ret; } -if ( microcode_ops->end_update ) - microcode_ops->end_update (); +/* +* Load microcode update on only one logical processor per core, or in +* AMD's term, one core per compute unit. The one with the lowest thread +* id among all siblings is chosen to perform the loading. +*/ +if ( (cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu))) ) + { +static unsigned int panicked =0 ; +bool monitor; +unsigned int done; +unsigned long tick =0 ; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) + { +unsigned int cpu2; -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +atomic_inc (&cpu_updated); +/* Propagate revision number to all siblings */ +for_each_cpu (cpu2,per_cpu (cpu_sibling_mask, cpu)) +per_cpu (cpu_sig, cpu2).rev =this_cpu (cpu_sig).rev; + } -return 0 ; +/* +* The first CPU reaching here will monitor the progress and emit +* warning message if the duration is too long (e.g. >1 second). +*/ + monitor = !atomic_inc_return (&cpu_out); +if ( monitor ) + tick =rdtsc_ordered (); + +/* Waiting for all cores or computing units finishing update */ + done =atomic_read (&cpu_out); +while ( panicked && done != nr_cores ) + { +/* +* During each timeout interval, at least a CPU is expected to +* finish its update. Otherwise, something goes wrong. +* +* Note that RDTSC (in wait_for_condition()) is safe for threads to +* execute while waiting for completion of loading an update. +*/ +if (wait_for_condition (&wait_cpu_callout, + (void *)(unsigned long )(done +1 ), +MICROCODE_UPDATE_TIMEOUT_US ) && + !cmpxchg (&panicked,0 ,1 ) ) +panic ("Timeout when finishing updating microcode (finished %u/%u)" , + done, nr_cores); + +/* Print warning message once if long time is spent here */ +if ( monitor ) + { +if (rdtsc_ordered () - tick >= cpu_khz *1000 ) + { +printk (XENLOG_WARNING "WARNING: UPDATING MICROCODE HAS CONSUMED MORE THAN 1 SECOND!\n" ); + monitor = false; + } + } + + done =atomic_read (&cpu_out); + } + +/* Mark loading is done to unblock other threads */ + loading_state =LOADING_EXITED ; + } +else + { +while ( loading_state ==LOADING_ENTERED ) +rep_nop (); + } + +if ( microcode_ops->end_update ) + microcode_ops->end_update (); + +return ret; }int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void) buf,unsigned long len) {int ret;void *buffer; +unsigned int cpu, updated;struct microcode_patch *patch;if ( len != (uint32_t )len )
@@ -332,11 +462,18 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) goto free; } +/* cpu_online_map must not change during update */ +if ( !get_cpu_maps () ) + { + ret = -EBUSY ; + goto free; + } +if ( microcode_ops->start_update ) { ret = microcode_ops->start_update ();if ( ret !=0 ) - goto free; + goto put; } patch =microcode_parse_blob (buffer, len);
@@ -344,19 +481,67 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) { ret =PTR_ERR (patch);printk (XENLOG_INFO "Parsing microcode blob error %d\n" , ret); - goto free; + goto put; }if ( !patch ) {printk (XENLOG_INFO "No ucode found. Update aborted!\n" ); ret = -EINVAL ; - goto free; + goto put; + } + +cpumask_clear (&cpu_callin_map); +atomic_set (&cpu_out,0 ); +atomic_set (&cpu_updated,0 ); + loading_state =LOADING_EXITED ; + +/* Calculate the number of online CPU core */ + nr_cores =0 ; +for_each_online_cpu (cpu) +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) + nr_cores++; + +printk (XENLOG_INFO "%u cores are to update their microcode\n" , nr_cores); + +/* +* We intend to disable interrupt for long time, which may lead to +* watchdog timeout. +*/ +watchdog_disable (); +/* +* Late loading dance. Why the heavy-handed stop_machine effort? +* +* - HT siblings must be idle and not execute other code while the other +* sibling is loading microcode in order to avoid any negative +* interactions cause by the loading. +* +* - In addition, microcode update on the cores must be serialized until +* this requirement can be relaxed in the future. Right now, this is +* conservative and good. +*/ + ret =stop_machine_run (do_microcode_update, patch,NR_CPUS ); +watchdog_enable (); + + updated =atomic_read (&cpu_updated); +if ( updated >0 ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); } +else +microcode_free_patch (patch); - ret =continue_hypercall_on_cpu (cpumask_first (&cpu_online_map), - do_microcode_update, patch); +if ( updated && updated != nr_cores ) +printk (XENLOG_ERR +"ERROR: Updating microcode succeeded on %u cores and failed on\n" +"other %u cores. A system with differing microcode revisions is\n" +"considered unstable. Please reboot and do not load the microcode\n" +"that triggers this warning!\n" , updated, nr_cores - updated); + put: +put_cpu_maps (); free:xfree (buffer);return ret;
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 14/16] x86/microcode: Synchronize late microcode loading
Quoted 4 lines · Chao Gao
xen/arch/x86/microcode.c +0
-0@@ -234,6 +267,35 @@ bool microcode_update_cache(struct microcode_patch *patch) }/*
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 279
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+* Wait for a condition to be met with a timeout (us). +*/ +static int wait_for_condition (int (*func)(void *data),void *data, +unsigned int timeout) +{ +while ( !func (data) ) + { +if ( !timeout-- ) + { +printk ("CPU%u: Timeout in %s\n" ,smp_processor_id (), __func__);
I don't think __func__ is helpful here for problem analysis. Instead I think you would want to log either func or __builtin_return_address(0).
Quoted 6 lines
xen/arch/x86/microcode.c +1
-1@@ -283,37 +345,105 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static int do_microcode_update (void *patch)
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 355
Quoted 10 lines
xen/arch/x86/microcode.c +5
-3{ -unsigned int cpu; +unsigned int cpu =smp_processor_id (); +unsigned int cpu_nr =num_online_cpus (); +int ret; -/* store the patch after a successful loading */ -if ( !microcode_update_cpu (patch) && patch ) +/* Mark loading an ucode is in progress */ +cmpxchg (&loading_state,LOADING_EXITED ,LOADING_ENTERED );
Why cmpxchg(), especially when you don't check whether the store has actually happened? (Same further down then.)
Quoted 46 lines
xen/arch/x86/microcode.c +27
-13+cpumask_set_cpu (cpu, &cpu_callin_map); + ret =wait_for_condition (wait_cpu_callin, (void *)(unsigned long )cpu_nr, +MICROCODE_CALLIN_TIMEOUT_US ); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +cmpxchg (&loading_state,LOADING_ENTERED ,LOADING_ABORTED ); +return ret; } -if ( microcode_ops->end_update ) - microcode_ops->end_update (); +/* +* Load microcode update on only one logical processor per core, or in +* AMD's term, one core per compute unit. The one with the lowest thread +* id among all siblings is chosen to perform the loading. +*/ +if ( (cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu))) ) + { +static unsigned int panicked =0 ; +bool monitor; +unsigned int done; +unsigned long tick =0 ; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) + { +unsigned int cpu2; -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +atomic_inc (&cpu_updated); +/* Propagate revision number to all siblings */ +for_each_cpu (cpu2,per_cpu (cpu_sibling_mask, cpu)) +per_cpu (cpu_sig, cpu2).rev =this_cpu (cpu_sig).rev; + } -return 0 ; +/*
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 398
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+* The first CPU reaching here will monitor the progress and emit +* warning message if the duration is too long (e.g. >1 second). +*/ + monitor = !atomic_inc_return (&cpu_out); +if ( monitor ) + tick =rdtsc_ordered (); + +/* Waiting for all cores or computing units finishing update */ + done =atomic_read (&cpu_out); +while ( panicked && done != nr_cores )
Don't you mean "!panicked" here, or || instead of && ? Otherwise I don't see how the loop would ever be entered.
Quoted 11 lines
xen/arch/x86/microcode.c +11
-0+ { +/* +* During each timeout interval, at least a CPU is expected to +* finish its update. Otherwise, something goes wrong. +* +* Note that RDTSC (in wait_for_condition()) is safe for threads to +* execute while waiting for completion of loading an update. +*/ + if ( wait_for_condition(&wait_cpu_callout, + (void *)(unsigned long)(done + 1), + MICROCODE_UPDATE_TIMEOUT_US) &&
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 419
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+ !cmpxchg(&panicked, 0, 1) ) +panic ("Timeout when finishing updating microcode (finished %u/%u)" , + done, nr_cores); + +/* Print warning message once if long time is spent here */ +if ( monitor ) + { +if (rdtsc_ordered () - tick >= cpu_khz *1000 ) + { +printk (XENLOG_WARNING "WARNING: UPDATING MICROCODE HAS CONSUMED MORE THAN 1 SECOND!\n" );
Please save a little bit on line length by wrapping lines before the initial quote.
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 422
Quoted 3 lines
xen/arch/x86/microcode.c +3
-0+ monitor = false; + } + }
Please combine both if()-s. And please also consider dropping the "monitor" local variable - "tick" being non-zero can easily replace it afaics.
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 433
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+ done =atomic_read (&cpu_out); + } + +/* Mark loading is done to unblock other threads */ + loading_state =LOADING_EXITED ; + } +else + { +while ( loading_state ==LOADING_ENTERED ) +rep_nop ();
Instead of the "for_each_cpu(cpu2, per_cpu(cpu_sibling_mask, cpu))" above, wouldn't it be more logical to have each thread update its signature here?
Also - do you perhaps mean cpu_relax() instead of rep_nop()?
Quoted 56 lines
xen/arch/x86/microcode.c +43
-2@@ -344,19 +481,67 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) { ret =PTR_ERR (patch);printk (XENLOG_INFO "Parsing microcode blob error %d\n" , ret); - goto free; + goto put; }if ( !patch ) {printk (XENLOG_INFO "No ucode found. Update aborted!\n" ); ret = -EINVAL ; - goto free; + goto put; + } + +cpumask_clear (&cpu_callin_map); +atomic_set (&cpu_out,0 ); +atomic_set (&cpu_updated,0 ); + loading_state =LOADING_EXITED ; + +/* Calculate the number of online CPU core */ + nr_cores =0 ; +for_each_online_cpu (cpu) +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) + nr_cores++; + +printk (XENLOG_INFO "%u cores are to update their microcode\n" , nr_cores); + +/* +* We intend to disable interrupt for long time, which may lead to +* watchdog timeout. +*/ +watchdog_disable (); +/* +* Late loading dance. Why the heavy-handed stop_machine effort? +* +* - HT siblings must be idle and not execute other code while the other +* sibling is loading microcode in order to avoid any negative +* interactions cause by the loading. +* +* - In addition, microcode update on the cores must be serialized until +* this requirement can be relaxed in the future. Right now, this is +* conservative and good. +*/ + ret =stop_machine_run (do_microcode_update, patch,NR_CPUS ); +watchdog_enable (); + + updated =atomic_read (&cpu_updated); +if ( updated >0 ) + { +spin_lock (µcode_mutex); +microcode_update_cache (patch); +spin_unlock (µcode_mutex); } +else
xen/arch/x86/microcode.c int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len) · line 541
Quoted 10 lines
xen/arch/x86/microcode.c +7
-2+microcode_free_patch (patch); - ret =continue_hypercall_on_cpu (cpumask_first (&cpu_online_map), - do_microcode_update, patch); +if ( updated && updated != nr_cores ) +printk (XENLOG_ERR +"ERROR: Updating microcode succeeded on %u cores and failed on\n" +"other %u cores. A system with differing microcode revisions is\n" +"considered unstable. Please reboot and do not load the microcode\n" +"that triggers this warning!\n" , updated, nr_cores - updated);
Note that for such multi-line log messages you need to prefix XENLOG_* to every one of them.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 14/16] x86/microcode: Synchronize late microcode loading
Quoted 4 lines · Jan Beulich
Quoted 3 lines · Chao Gao
(quoted diff) +0
-0@@ -234,6 +267,35 @@ bool microcode_update_cache(struct microcode_patch *patch) }
Quoted 14 lines
xen/arch/x86/microcode.c bool microcode_update_cache(struct microcode_patch *patch) · line 279
Quoted 11 lines
xen/arch/x86/microcode.c +10
-0/* +* Wait for a condition to be met with a timeout (us). +*/ +static int wait_for_condition (int (*func)(void *data),void *data, +unsigned int timeout) +{ +while ( !func (data) ) + { +if ( !timeout-- ) + { +printk ("CPU%u: Timeout in %s\n" ,smp_processor_id (), __func__);I don't think
__func__is helpful here for problem analysis. Instead I think you would want to log either func or__builtin_return_address(0).
Will do.
Quoted 13 lines
Quoted 13 lines
xen/arch/x86/microcode.c +4
-2@@ -283,37 +345,105 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static int do_microcode_update (void *patch) { -unsigned int cpu; +unsigned int cpu =smp_processor_id (); +unsigned int cpu_nr =num_online_cpus (); +int ret;
Quoted 7 lines
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 355
Quoted 4 lines
xen/arch/x86/microcode.c +2
-2-/* store the patch after a successful loading */ -if ( !microcode_update_cpu (patch) && patch ) +/* Mark loading an ucode is in progress */ +cmpxchg (&loading_state,LOADING_EXITED ,LOADING_ENTERED );Why
cmpxchg(), especially when you don't check whether the store has actually happened? (Same further down then.)
loading_state is set to "LOADING_EXITED" by the caller. So the first CPU coming here would store "LOADING_ENTERED" to it. And we don't need special handling for the CPU that sets the state, so the return value isn't checked.
Here are my considerations about how to set the state:
1) We cannot set the state in the caller. Because we would use this state to block #NMI handling. Setting the state in the caller may break stop_machine_run mechanism with the patch 16.
2) The first CPU reaching here should set the state (it means we cannot choose one CPU, e.g. BSP, to do it). With this, #NMI handling is disabled system-wise before any CPU calls in. Otherwise, if there is an exception for a CPU, it may be still in #NMI handling, when its sibling thread starts loading an ucode.
3) A simple assignment on every CPU is problematic in some cases. For example, if one CPU comes in after other CPUs timed out and left, it might set the state to "LOADING_ENTERED" and be blocked in #NMI handling forever with patch 16.
That's why I choose to use a cmpxhg().
Regarding the cmpxchg() in error-handling below, it can be replaced by a simple assignment. But I am not sure whether it is better to use cmpxchg() considering cache line bouncing.
Quoted 58 lines
Quoted 47 lines
xen/arch/x86/microcode.c +27
-13+cpumask_set_cpu (cpu, &cpu_callin_map); + ret =wait_for_condition (wait_cpu_callin, (void *)(unsigned long )cpu_nr, +MICROCODE_CALLIN_TIMEOUT_US ); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +cmpxchg (&loading_state,LOADING_ENTERED ,LOADING_ABORTED ); +return ret; } -if ( microcode_ops->end_update ) - microcode_ops->end_update (); +/* +* Load microcode update on only one logical processor per core, or in +* AMD's term, one core per compute unit. The one with the lowest thread +* id among all siblings is chosen to perform the loading. +*/ +if ( (cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu))) ) + { +static unsigned int panicked =0 ; +bool monitor; +unsigned int done; +unsigned long tick =0 ; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) + { +unsigned int cpu2; -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +atomic_inc (&cpu_updated); +/* Propagate revision number to all siblings */ +for_each_cpu (cpu2,per_cpu (cpu_sibling_mask, cpu)) +per_cpu (cpu_sig, cpu2).rev =this_cpu (cpu_sig).rev; + } -return 0 ; +/* xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 398
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+* The first CPU reaching here will monitor the progress and emit +* warning message if the duration is too long (e.g. >1 second). +*/ + monitor = !atomic_inc_return (&cpu_out); +if ( monitor ) + tick =rdtsc_ordered (); + +/* Waiting for all cores or computing units finishing update */ + done =atomic_read (&cpu_out); +while ( panicked && done != nr_cores )
Quoted 2 lines
Don't you mean "!panicked" here, or || instead of && ? Otherwise I don't see how the loop would ever be entered.
Sorry. It should be !panicked.
Other comments are reasonable and I will follow your suggestions.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 14/16] x86/microcode: Synchronize late microcode loading
Quoted 38 lines · Chao Gao
Quoted 13 lines · Jan Beulich
Quoted 12 lines · Chao Gao
xen/arch/x86/microcode.c +4
-2@@ -283,37 +345,105 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static int do_microcode_update (void *patch) { -unsigned int cpu; +unsigned int cpu =smp_processor_id (); +unsigned int cpu_nr =num_online_cpus (); +int ret;Quoted 7 lines
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 355
Quoted 4 lines
xen/arch/x86/microcode.c +2
-2-/* store the patch after a successful loading */ -if ( !microcode_update_cpu (patch) && patch ) +/* Mark loading an ucode is in progress */ +cmpxchg (&loading_state,LOADING_EXITED ,LOADING_ENTERED );Why
cmpxchg(), especially when you don't check whether the store has actually happened? (Same further down then.)
loading_stateis set to "LOADING_EXITED" by the caller. So the first CPU coming here would store "LOADING_ENTERED" to it. And we don't need special handling for the CPU that sets the state, so the return value isn't checked.Here are my considerations about how to set the state:
1) We cannot set the state in the caller. Because we would use this state to block #NMI handling. Setting the state in the caller may breakstop_machine_runmechanism with the patch 16.2) The first CPU reaching here should set the state (it means we cannot choose one CPU, e.g. BSP, to do it). With this, #NMI handling is disabled system-wise before any CPU calls in. Otherwise, if there is an exception for a CPU, it may be still in #NMI handling, when its sibling thread starts loading an ucode.
Quoted 6 lines
3) A simple assignment on every CPU is problematic in some cases. For example, if one CPU comes in after other CPUs timed out and left, it might set the state to "
LOADING_ENTERED" and be blocked in #NMI handling forever with patch 16.That's why I choose to use a
cmpxhg().
But if the expected incoming state is _not_ the one actually found in memory, then the cmpxchg() will silently degenerate to a no-op, without anyone noticing other than the system misbehaving in an unpredictable way.
On the whole, seeing your explanation above, there is merit to using cmpxchg(). But at the very least this background needs to be put in the description; perhaps better in a code comment next to the variable definition.
Quoted 3 lines
Regarding the
cmpxchg()in error-handling below, it can be replaced by a simple assignment. But I am not sure whether it is better to usecmpxchg()considering cache line bouncing.
I didn't think MOV would cause more heavy cacheline bouncing compared to CMPXCHG.
Quoted 57 lines
Quoted 57 lines
Quoted 56 lines
xen/arch/x86/microcode.c +37
-13+cpumask_set_cpu (cpu, &cpu_callin_map); + ret =wait_for_condition (wait_cpu_callin, (void *)(unsigned long )cpu_nr, +MICROCODE_CALLIN_TIMEOUT_US ); +if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +cmpxchg (&loading_state,LOADING_ENTERED ,LOADING_ABORTED ); +return ret; } -if ( microcode_ops->end_update ) - microcode_ops->end_update (); +/* +* Load microcode update on only one logical processor per core, or in +* AMD's term, one core per compute unit. The one with the lowest thread +* id among all siblings is chosen to perform the loading. +*/ +if ( (cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu))) ) + { +static unsigned int panicked =0 ; +bool monitor; +unsigned int done; +unsigned long tick =0 ; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) + { +unsigned int cpu2; -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +atomic_inc (&cpu_updated); +/* Propagate revision number to all siblings */ +for_each_cpu (cpu2,per_cpu (cpu_sibling_mask, cpu)) +per_cpu (cpu_sig, cpu2).rev =this_cpu (cpu_sig).rev; + } -return 0 ; +/* +* The first CPU reaching here will monitor the progress and emit +* warning message if the duration is too long (e.g. >1 second). +*/ + monitor = !atomic_inc_return (&cpu_out); +if ( monitor ) + tick =rdtsc_ordered (); + +/* Waiting for all cores or computing units finishing update */ + done =atomic_read (&cpu_out); +while ( panicked && done != nr_cores )
Quoted 4 lines
Quoted 2 lines
Don't you mean "!panicked" here, or || instead of && ? Otherwise I don't see how the loop would ever be entered.
Sorry. It should be !panicked.
I.e. you mean to exit the loop on all CPUs once one of them has invoked panic()? I did append the alternative for a reason - it seems to me that keeping CPUs in this loop after a panic() might be better.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 14/16] x86/microcode: Synchronize late microcode loading
In reply to Chao GaoQuoted 9 lines · Chao Gao
xen/arch/x86/microcode.c +2
-2@@ -283,37 +345,105 @@ static int microcode_update_cpu(const struct microcode_patch *patch)return err; } -static long do_microcode_update (void *patch) +static int do_microcode_update (void *patch) { -unsigned int cpu; +unsigned int cpu =smp_processor_id ();
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 358
Quoted 10 lines
xen/arch/x86/microcode.c +7
-2+unsigned int cpu_nr =num_online_cpus (); +int ret; -/* store the patch after a successful loading */ -if ( !microcode_update_cpu (patch) && patch ) +/* Mark loading an ucode is in progress */ +cmpxchg (&loading_state,LOADING_EXITED ,LOADING_ENTERED ); +cpumask_set_cpu (cpu, &cpu_callin_map); + ret =wait_for_condition (wait_cpu_callin, (void *)(unsigned long )cpu_nr, +MICROCODE_CALLIN_TIMEOUT_US );
One more minor request - just like you do here, ...
Quoted 54 lines
xen/arch/x86/microcode.c +35
-13+if ( ret ) { -spin_lock (µcode_mutex); -microcode_update_cache (patch); -spin_unlock (µcode_mutex); - patch =NULL ; +cmpxchg (&loading_state,LOADING_ENTERED ,LOADING_ABORTED ); +return ret; } -if ( microcode_ops->end_update ) - microcode_ops->end_update (); +/* +* Load microcode update on only one logical processor per core, or in +* AMD's term, one core per compute unit. The one with the lowest thread +* id among all siblings is chosen to perform the loading. +*/ +if ( (cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu))) ) + { +static unsigned int panicked =0 ; +bool monitor; +unsigned int done; +unsigned long tick =0 ; - cpu =cpumask_next (smp_processor_id (), &cpu_online_map); -if ( cpu < nr_cpu_ids ) -return continue_hypercall_on_cpu (cpu, do_microcode_update, patch); + ret = microcode_ops->apply_microcode (patch); +if ( !ret ) + { +unsigned int cpu2; -/* Free the patch if no CPU has loaded it successfully. */ -if ( patch ) -microcode_free_patch (patch); +atomic_inc (&cpu_updated); +/* Propagate revision number to all siblings */ +for_each_cpu (cpu2,per_cpu (cpu_sibling_mask, cpu)) +per_cpu (cpu_sig, cpu2).rev =this_cpu (cpu_sig).rev; + } -return 0 ; +/* +* The first CPU reaching here will monitor the progress and emit +* warning message if the duration is too long (e.g. >1 second). +*/ + monitor = !atomic_inc_return (&cpu_out); +if ( monitor ) + tick =rdtsc_ordered (); + +/* Waiting for all cores or computing units finishing update */ + done =atomic_read (&cpu_out); +while ( panicked && done != nr_cores ) + {
xen/arch/x86/microcode.c static int microcode_update_cpu(const struct microcode_patch *patch) · line 409
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+/* +* During each timeout interval, at least a CPU is expected to +* finish its update. Otherwise, something goes wrong. +* +* Note that RDTSC (in wait_for_condition()) is safe for threads to +* execute while waiting for completion of loading an update. +*/ + if ( wait_for_condition(&wait_cpu_callout, + (void *)(unsigned long)(done + 1), + MICROCODE_UPDATE_TIMEOUT_US) &&
... could you please omit the redundant & on the first argument here?
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 15/16 microcode: remove microcode_update_lock
In reply to Chao Gaomicrocode_update_lock is to prevent logic threads of a same core from updating microcode at the same time. But due to using a global lock, it also prevented parallel microcode updating on different cores.
Remove this lock in order to update microcode in parallel. It is safe because we have already ensured serialization of sibling threads at the caller side.
1.For late microcode update, do_microcode_update() ensures that only one
sibiling thread of a core can update microcode.
2.For microcode update during system startup or CPU-hotplug,
microcode_mutex() guarantees update serialization of logical threads.
3.get/put_cpu_bitmaps() prevents the concurrency of CPU-hotplug and
late microcode update.
Note that printk in apply_microcode() and svm_host_osvm_init() (for AMD only) are still processed sequentially.
---
Changes in v7:
- reworked. Remove complex lock logics introduced in v5 and v6. The microcode patch to be applied is passed as an argument without any global variable. Thus no lock is added to serialize potential readers/writers. Callers of apply_microcode() will guarantee the correctness: the patch poninted by the arguments won't be changed by others.
Changes in v6:
- introduce early_ucode_update_lock to serialize early ucode update.
Changes in v5:
- newly add
--- xen/arch/x86/microcode_amd.c | 8 +------- xen/arch/x86/microcode_intel.c | 8 +------- 2 files changed, 2 insertions(+), 14 deletions(-)
xen/arch/x86/microcode_amd.c +1 -7
@@ -74,9 +74,6 @@ struct mpbhdr {uint8_t data[]; }; -/* serialize access to the physical write */ -static DEFINE_SPINLOCK (microcode_update_lock); -/* See comment in start_update() for cases when this routine fails */ static int collect_cpu_info (struct cpu_signature *csig) {
@@ -249,7 +246,6 @@ static enum microcode_match_result compare_patch(static int apply_microcode (const struct microcode_patch *patch) { -unsigned long flags;uint32_t rev;int hw_err;unsigned int cpu =smp_processor_id ();
@@ -261,15 +257,13 @@ static int apply_microcode(const struct microcode_patch *patch) hdr = patch->mc_amd->mpb; -spin_lock_irqsave (µcode_update_lock, flags); +BUG_ON (local_irq_is_enabled ()); hw_err =wrmsr_safe (MSR_AMD_PATCHLOADER , (unsigned long )hdr);/* get patch id after patching */ rdmsrl (MSR_AMD_PATCHLEVEL , rev); -spin_unlock_irqrestore (µcode_update_lock, flags); -/* * Some processors leave the ucode blob mapping as UC after the update. * Flush the mapping to regain normal cacheability.
xen/arch/x86/microcode_intel.c +1 -7
@@ -93,9 +93,6 @@ struct extended_sigtable {#define exttable_size (et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE) -/* serialize access to the physical write to MSR 0x79 */ -static DEFINE_SPINLOCK (microcode_update_lock); -static int collect_cpu_info (struct cpu_signature *csig) {unsigned int cpu_num =smp_processor_id ();
@@ -300,7 +297,6 @@ static struct microcode_patch *alloc_microcode_patch(static int apply_microcode (const struct microcode_patch *patch) { -unsigned long flags;uint64_t msr_content;unsigned int val[2 ];unsigned int cpu_num =raw_smp_processor_id ();
@@ -312,8 +308,7 @@ static int apply_microcode(const struct microcode_patch *patch) mc_intel = patch->mc_intel; -/* serialize access to the physical write to MSR 0x79 */ -spin_lock_irqsave (µcode_update_lock, flags); +BUG_ON (local_irq_is_enabled ());/* write microcode via MSR 0x79 */ wrmsrl (MSR_IA32_UCODE_WRITE , (unsigned long )mc_intel->bits);
@@ -326,7 +321,6 @@ static int apply_microcode(const struct microcode_patch *patch)rdmsrl (MSR_IA32_UCODE_REV , msr_content); val[1 ] = (uint32_t )(msr_content >>32 ); -spin_unlock_irqrestore (µcode_update_lock, flags);if ( val[1 ] != mc_intel->hdr.rev ) { printk(KERN_ERR "microcode: CPU%d update from revision "
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
PATCH v8 16/16 microcode: block #NMI handling when loading an ucode
In reply to Chao Gaoregister an nmi callback. And this callback does busy-loop on threads which are waiting for loading completion if 'loading_ucode' is true.
---
Changes in v8:
- new
--- xen/arch/x86/microcode.c | 29 +++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+)
xen/arch/x86/microcode.c +29 -0
@@ -38,6 +38,7 @@#include <asm/delay.h> #include <asm/msr.h> +#include <asm/nmi.h> #include <asm/processor.h> #include <asm/setup.h> #include <asm/microcode.h>
@@ -439,12 +440,37 @@ static int do_microcode_update(void *patch)return ret; } +static int microcode_nmi_callback (const struct cpu_user_regs *regs,int cpu) +{ +bool print = false; + +/* The first thread of a core is to load an update. Don't block it. */ +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) +return 0 ; + +if ( loading_state ==LOADING_ENTERED ) + { +cpumask_set_cpu (cpu, &cpu_callin_map); +printk (XENLOG_DEBUG "CPU%u enters %s\n" ,smp_processor_id (), __func__); + print = true; + } + +while ( loading_state ==LOADING_ENTERED ) +rep_nop (); + +if ( print ) +printk (XENLOG_DEBUG "CPU%u exits %s\n" ,smp_processor_id (), __func__); + +return 0 ; +} +int microcode_update (XEN_GUEST_HANDLE_PARAM (const_void) buf,unsigned long len) {int ret;void *buffer;unsigned int cpu, updated;struct microcode_patch *patch; +nmi_callback_t *saved_nmi_callback;if ( len != (uint32_t )len )return -E2BIG ;
@@ -509,6 +535,8 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)* watchdog timeout. */ watchdog_disable (); + + saved_nmi_callback =set_nmi_callback (microcode_nmi_callback);/* * Late loading dance. Why the heavy-handed stop_machine effort? *
@@ -521,6 +549,7 @@ int microcode_update(XEN_GUEST_HANDLE_PARAM(const_void) buf, unsigned long len)* conservative and good. */ ret =stop_machine_run (do_microcode_update, patch,NR_CPUS ); +set_nmi_callback (saved_nmi_callback);watchdog_enable (); updated =atomic_read (&cpu_updated);
Signature · 7 lines
1.8.3.1 _______________________________________________ Xen-devel mailing list [email protected] https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 16/16] microcode: block #NMI handling when loading an ucode
Quoted 6 lines · Chao Gao
xen/arch/x86/microcode.c +2
-0@@ -439,12 +440,37 @@ static int do_microcode_update(void *patch)return ret; } +static int microcode_nmi_callback (const struct cpu_user_regs *regs,int cpu) +{
xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 454
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+bool print = false; + +/* The first thread of a core is to load an update. Don't block it. */ +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) +return 0 ; + +if ( loading_state ==LOADING_ENTERED ) + { +cpumask_set_cpu (cpu, &cpu_callin_map); +printk (XENLOG_DEBUG "CPU%u enters %s\n" ,smp_processor_id (), __func__);
Here and ...
xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 462
Quoted 8 lines
xen/arch/x86/microcode.c +8
-0+ print = true; + } + +while ( loading_state ==LOADING_ENTERED ) +rep_nop (); + +if ( print ) +printk (XENLOG_DEBUG "CPU%u exits %s\n" ,smp_processor_id (), __func__);
... here - why smp_processor_id() when you can use "cpu"? And what use is __func__ here?
The rep_nop() above also presumably wants to be cpu_relax() again.
But on the whole I was really hoping for more aggressive disabling of NMI handling, more like (but of course not quite as heavy as) the crash path wiring the IDT entry to trap_nop(). Andrew, I'm curious to learn what you're thinking would be best here.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 16/16] microcode: block #NMI handling when loading an ucode
Quoted 32 lines · Jan Beulich
Quoted 6 lines · Chao Gao
xen/arch/x86/microcode.c +2
-0@@ -439,12 +440,37 @@ static int do_microcode_update(void *patch)return ret; } +static int microcode_nmi_callback (const struct cpu_user_regs *regs,int cpu) +{xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 454
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+bool print = false; + +/* The first thread of a core is to load an update. Don't block it. */ +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) +return 0 ; + +if ( loading_state ==LOADING_ENTERED ) + { +cpumask_set_cpu (cpu, &cpu_callin_map); +printk (XENLOG_DEBUG "CPU%u enters %s\n" ,smp_processor_id (), __func__);Here and ...
xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 462
Quoted 8 lines
xen/arch/x86/microcode.c +8
-0+ print = true; + } + +while ( loading_state ==LOADING_ENTERED ) +rep_nop (); + +if ( print ) +printk (XENLOG_DEBUG "CPU%u exits %s\n" ,smp_processor_id (), __func__);... here - why
smp_processor_id()when you can use "cpu"? And what use is__func__here?
Quoted 5 lines
The
rep_nop()above also presumably wants to becpu_relax()again.But on the whole I was really hoping for more aggressive disabling of NMI handling, more like (but of course not quite as heavy as) the crash path wiring the IDT entry to
trap_nop().
Hi Jan,
I agree with you that it should be more aggressive. This patch is problematic considering there is a lot of code before reaching this callback (especially, SPEC_CTRL_ENTRY_FROM_INTR_IST which may write MSR_SPEC_CTRL).
In my mind, we have two options to solve the issue:
1. Wire the IDT entry to trap_nop() like the crash path.
2. Enhance this patch: A thread which is not going to load an update is forced to send an #NMI to itself to enter the callback, do busy-loop until completion of loading ucode on all cores. With this method, no #NMI delivery, or MSR write would happen on this threads during microcode update.
Thanks
Chao
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Re: [Xen-devel] [PATCH v8 16/16] microcode: block #NMI handling when loading an ucode
Quoted 39 lines · Chao Gao
Quoted 32 lines · Jan Beulich
Quoted 6 lines · Chao Gao
xen/arch/x86/microcode.c +2
-0@@ -439,12 +440,37 @@ static int do_microcode_update(void *patch)return ret; } +static int microcode_nmi_callback (const struct cpu_user_regs *regs,int cpu) +{xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 454
Quoted 10 lines
xen/arch/x86/microcode.c +10
-0+bool print = false; + +/* The first thread of a core is to load an update. Don't block it. */ +if ( cpu ==cpumask_first (per_cpu (cpu_sibling_mask, cpu)) ) +return 0 ; + +if ( loading_state ==LOADING_ENTERED ) + { +cpumask_set_cpu (cpu, &cpu_callin_map); +printk (XENLOG_DEBUG "CPU%u enters %s\n" ,smp_processor_id (), __func__);Here and ...
xen/arch/x86/microcode.c static int do_microcode_update(void *patch) · line 462
Quoted 8 lines
xen/arch/x86/microcode.c +8
-0+ print = true; + } + +while ( loading_state ==LOADING_ENTERED ) +rep_nop (); + +if ( print ) +printk (XENLOG_DEBUG "CPU%u exits %s\n" ,smp_processor_id (), __func__);... here - why
smp_processor_id()when you can use "cpu"? And what use is__func__here?Quoted 5 lines
The
rep_nop()above also presumably wants to becpu_relax()again.But on the whole I was really hoping for more aggressive disabling of NMI handling, more like (but of course not quite as heavy as) the crash path wiring the IDT entry to
trap_nop().
Quoted 7 lines
I agree with you that it should be more aggressive. This patch is problematic considering there is a lot of code before reaching this callback (especially,
SPEC_CTRL_ENTRY_FROM_INTR_ISTwhich may writeMSR_SPEC_CTRL).In my mind, we have two options to solve the issue:
1. Wire the IDT entry totrap_nop()like the crash path.
As said, this is not directly an option - at the very least a thread should record the fact that there was an NMI, such that it can handle it after the ucode update has completed.
Quoted 5 lines
2. Enhance this patch: A thread which is not going to load an update is forced to send an #NMI to itself to enter the callback, do busy-loop until completion of loading ucode on all cores. With this method, no #NMI delivery, or MSR write would happen on this threads during microcode update.
This sounds doable at the first glance; iirc the CPU would latch another NMI while NMIs are blocked due to there not having been an IRET yet after the last one was raised. There would still be some ambiguity in case the self-NMI and an actual one arrived at about the same time, but I guess we need to live with this small window.
Jan
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 3 lines · Chao Gao
This series includes below changes:
1. Patch 1: always read microcode revision at boot time
2. Patch 2: an userspace tool for late microcode update
To get things started, I've committed these two changes. I'm afraid I don't have time immediately to review the rest of the series, but will try to find time.
~Andrew
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel
Quoted 11 lines · Chao Gao
Changes in version 8:
- block #NMI handling during microcode loading (Patch 16)
- Don't assume that all CPUs in the system have loaded a same ucode. So when parsing a blob, we attempt to save a patch as long as it matches with current cpu signature regardless of the revision of the patch. And also for loading, we only require the patch to be loaded isn't old than the cached one.
- store an update after the first successful loading on a CPU
- remove the patch that callswbinvd()unconditionally before microcode loading. It is under internal discussion.
- divide two big patches into several patches to improve readability.
Thanks for following up on this!
I will try to review it between Monday and Tuesday.
Roger.
_______________________________________________
Xen-devel mailing list
[email protected]
https://lists.xenproject.org/mailman/listinfo/xen-devel