ARM: at91: Add the chip ID for SAMA5D2 LPDDR2 SiP
PATCH 1/7 ARM: at91: Add the chip ID for SAMA5D2 LPDDR2 SiP
From: Nicolas Ferre <[email protected]>
The SAMA5D2 LPDDR2 SiP (System in Package) is added for SoC identification.
--- arch/arm/mach-at91/armv7/sama5d2_devices.c | 8 ++++++++ arch/arm/mach-at91/include/mach/sama5d2.h | 4 ++++ 2 files changed, 12 insertions(+)
arch/arm/mach-at91/armv7/sama5d2_devices.c +8 -0
@@ -57,8 +57,16 @@ char *get_cpu_name(void)return "SAMA5D27 512M bits DDR2 SDRAM" ;case ARCH_EXID_SAMA5D27C_D1G :return "SAMA5D27 1G bits DDR2 SDRAM" ; +case ARCH_EXID_SAMA5D27C_LD1G : +return "SAMA5D27 1G bits LPDDR2 SDRAM" ; +case ARCH_EXID_SAMA5D27C_LD2G : +return "SAMA5D27 2G bits LPDDR2 SDRAM" ;case ARCH_EXID_SAMA5D28C_D1G :return "SAMA5D28 1G bits DDR2 SDRAM" ; +case ARCH_EXID_SAMA5D28C_LD1G : +return "SAMA5D28 1G bits LPDDR2 SDRAM" ; +case ARCH_EXID_SAMA5D28C_LD2G : +return "SAMA5D28 2G bits LPDDR2 SDRAM" ; } }
arch/arm/mach-at91/include/mach/sama5d2.h +4 -0
@@ -220,7 +220,11 @@#define ARCH_EXID_SAMA5D225C_D1M 0x00000053#define ARCH_EXID_SAMA5D27C_D5M 0x00000032#define ARCH_EXID_SAMA5D27C_D1G 0x00000033 +#define ARCH_EXID_SAMA5D27C_LD1G 0x00000061 +#define ARCH_EXID_SAMA5D27C_LD2G 0x00000062#define ARCH_EXID_SAMA5D28C_D1G 0x00000013 +#define ARCH_EXID_SAMA5D28C_LD1G 0x00000071 +#define ARCH_EXID_SAMA5D28C_LD2G 0x00000072/* Checked if defined in ethernet driver macb */ #define cpu_is_sama5d2 _cpu_is_sama5d2
Signature · 1 line
2.7.4
PATCH 1/7 ARM: at91: Add the chip ID for SAMA5D2 LPDDR2 SiP
Quoted 7 lines · Eugen.Hristev at microchip.com
From: Nicolas Ferre <[email protected]>
The SAMA5D2 LPDDR2 SiP (System in Package) is added for SoC identification.
Signed-off-by Nicolas Ferre <[email protected]>---
Applied this series to u-boot-atmel/next to be queued for next merge window.
PATCH 2/7 board: atmel: add sama5d27_wlsom1_ek board
In reply to Eugen.Hristev at microchip.comFrom: Nicolas Ferre <[email protected]>
Add support for the SAMA5D27-WLSOM1-EK. It's based on the Microchip WireLess SoM which contains the SAMa5D27 LPDDR2 2Gbits SiP.
[eugen.hristev at microchip.com]: added u-boot specific dtsi and ported to 2019.10
--- arch/arm/dts/Makefile | 3 + arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi | 38 ++++++++++ arch/arm/dts/at91-sama5d27_wlsom1_ek.dts | 84 ++++++++++++++++++++++ arch/arm/dts/sama5d27_wlsom1.dtsi | 56 +++++++++++++++ arch/arm/mach-at91/Kconfig | 15 ++++ board/atmel/sama5d27_wlsom1_ek/Kconfig | 15 ++++ board/atmel/sama5d27_wlsom1_ek/MAINTAINERS | 7 ++ board/atmel/sama5d27_wlsom1_ek/Makefile | 7 ++ .../atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 80 +++++++++++++++++++++ configs/sama5d27_wlsom1_ek_mmc_defconfig | 72 +++++++++++++++++++ include/configs/sama5d27_wlsom1_ek.h | 34 +++++++++ 11 files changed, 411 insertions(+) create mode 100644 arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi create mode 100644 arch/arm/dts/at91-sama5d27_wlsom1_ek.dts create mode 100644 arch/arm/dts/sama5d27_wlsom1.dtsi create mode 040000 board/atmel/sama5d27_wlsom1_ek create mode 100644 board/atmel/sama5d27_wlsom1_ek/Kconfig create mode 100644 board/atmel/sama5d27_wlsom1_ek/MAINTAINERS create mode 100644 board/atmel/sama5d27_wlsom1_ek/Makefile create mode 100644 board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c create mode 100644 configs/sama5d27_wlsom1_ek_mmc_defconfig create mode 100644 include/configs/sama5d27_wlsom1_ek.h
arch/arm/dts/Makefile +3 -0
@@ -717,6 +717,9 @@ dtb-$(CONFIG_TARGET_SAMA5D2_XPLAINED) += \ dtb-$(CONFIG_TARGET_SAMA5D27_SOM1_EK) += \ at91-sama5d27_som1_ek.dtb +dtb-$(CONFIG_TARGET_SAMA5D27_WLSOM1_EK) += \ + at91-sama5d27_wlsom1_ek.dtb + dtb-$(CONFIG_TARGET_SAMA5D2_ICP) += \ at91-sama5d2_icp.dtb
arch/arm/dts/at91-sama5d27_wlsom1_ek-u-boot.dtsi new file +38 -0
@@ -0,0 +1,38 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * at91-sama5d27_wlsom1_ek-u-boot.dts - Device Tree file for SAMA5D27 WLSOM1 EK + * + * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries + * + * Author: Eugen Hristev <[email protected]> + */ + +/ { + chosen { + u-boot,dm-pre-reloc; + }; +}; + +&sdmmc0 { + u-boot,dm-pre-reloc; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; + +&sfr { + u-boot,dm-pre-reloc; +}; + +&pinctrl_sdmmc0_cmd_dat_default { + u-boot,dm-pre-reloc; +}; + +&pinctrl_sdmmc0_ck_cd_default { + u-boot,dm-pre-reloc; +}; + +&pinctrl_uart0_default { + u-boot,dm-pre-reloc; +};
arch/arm/dts/at91-sama5d27_wlsom1_ek.dts new file +84 -0
84 lines not on this page · raw message
arch/arm/dts/sama5d27_wlsom1.dtsi new file +56 -0
56 lines not on this page · raw message
arch/arm/mach-at91/Kconfig +15 -0
@@ -180,6 +180,20 @@ config TARGET_SAMA5D27_SOM1_EK processor-based SAMA5D2 MPU with up to 1 Gbit DDR2-SDRAM in a single package. +config TARGET_SAMA5D27_WLSOM1_EK + bool "SAMA5D27 WLSOM1 EK board" + select SAMA5D2 + select BOARD_EARLY_INIT_F + select BOARD_LATE_INIT + select CPU_V7A + help + The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package), + a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless + module providing bluetooth and wifi is also embedded. + The SAMA5D2 SiP integrates the ARM Cortex-A5 + processor-based SAMA5D2 MPU with 2 Gbit LPDDR2-SDRAM + in a single package. + config TARGET_SAMA5D2_ICP bool "SAMA5D2 Industrial Connectivity Platform (ICP)" select CPU_V7A
@@ -292,6 +306,7 @@ source "board/atmel/at91sam9x5ek/Kconfig" source "board/atmel/sama5d2_ptc_ek/Kconfig" source "board/atmel/sama5d2_xplained/Kconfig" source "board/atmel/sama5d27_som1_ek/Kconfig" +source "board/atmel/sama5d27_wlsom1_ek/Kconfig" source "board/atmel/sama5d2_icp/Kconfig" source "board/atmel/sama5d3_xplained/Kconfig" source "board/atmel/sama5d3xek/Kconfig"
board/atmel/sama5d27_wlsom1_ek/Kconfig new file +15 -0
@@ -0,0 +1,15 @@ +if TARGET_SAMA5D27_WLSOM1_EK + +config SYS_BOARD + default "sama5d27_wlsom1_ek" + +config SYS_VENDOR + default "atmel" + +config SYS_SOC + default "at91" + +config SYS_CONFIG_NAME + default "sama5d27_wlsom1_ek" + +endif
board/atmel/sama5d27_wlsom1_ek/MAINTAINERS new file +7 -0
@@ -0,0 +1,7 @@ +SAMA5D27 WLSOM1 EK BOARD +M: Nicolas Ferre <[email protected]> +M: Eugen Hristev <[email protected]> +S: Maintained +F: board/atmel/sama5d27_wlsom1_ek/ +F: include/configs/sama5d27_wlsom1_ek.h +F: configs/sama5d27_wlsom1_ek_mmc_defconfig
board/atmel/sama5d27_wlsom1_ek/Makefile new file +7 -0
@@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0+ +# +# Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries +# +# Author: Nicolas Ferre <[email protected]> + +obj-y += sama5d27_wlsom1_ek.o
board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c new file +80 -0
80 lines not on this page · raw message
configs/sama5d27_wlsom1_ek_mmc_defconfig new file +72 -0
72 lines not on this page · raw message
include/configs/sama5d27_wlsom1_ek.h new file +34 -0
@@ -0,0 +1,34 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* +* Configuration file for the SAMA5D27 WLSOM1 EK Board. +* +* Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries +* +* Author: Nicolas Ferre <[email protected]> +*/ + +#ifndef __CONFIG_H +#define __CONFIG_H + +#include "at91-sama5_common.h" + +#undef CONFIG_SYS_AT91_MAIN_CLOCK +#define CONFIG_SYS_AT91_MAIN_CLOCK 24000000/* from 24 MHz crystal */ + +/* SDRAM */ +#define CONFIG_SYS_SDRAM_BASE 0x20000000 +#define CONFIG_SYS_SDRAM_SIZE 0x10000000 + +#define CONFIG_SYS_INIT_SP_ADDR \ + (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) + +#define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ + +/* NAND flash */ +#undef CONFIG_CMD_NAND + +#ifdef CONFIG_SD_BOOT +#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#endif + +#endif
Signature · 1 line
2.7.4
PATCH 3/7 ARM: at91: sfr: convert to Kconfig
In reply to Eugen.Hristev at microchip.comFrom: Eugen Hristev <[email protected]>
This converts the at91 sfr to Kconfig
--- arch/arm/mach-at91/Kconfig | 9 ++++++++- arch/arm/mach-at91/Makefile | 5 +++-- arch/arm/mach-at91/atmel_sfr.c | 3 +++ 3 files changed, 14 insertions(+), 3 deletions(-)
arch/arm/mach-at91/Kconfig +8 -1
@@ -46,6 +46,7 @@ config AT91SAM9X5 config SAMA5D2 bool select CPU_V7A + select ATMEL_SFR config SAMA5D3 bool
@@ -54,6 +55,7 @@ config SAMA5D3 config SAMA5D4 bool select CPU_V7A + select ATMEL_SFR choice prompt "Atmel AT91 board select"
@@ -173,6 +175,7 @@ config TARGET_SAMA5D27_SOM1_EK select BOARD_LATE_INIT select CPU_V7A select SUPPORT_SPL + select ATMEL_SFR help The SAMA5D27 SOM1 embeds SAMA5D2 SiP(System in Package), a 64Mbit QSPI flash, KSZ8081 Phy and a Mac-address EEPROM
@@ -196,7 +199,7 @@ config TARGET_SAMA5D27_WLSOM1_EK config TARGET_SAMA5D2_ICP bool "SAMA5D2 Industrial Connectivity Platform (ICP)" - select CPU_V7A + select SAMA5D2 select SUPPORT_SPL select BOARD_EARLY_INIT_F select BOARD_LATE_INIT
@@ -292,6 +295,10 @@ config TARGET_WB50N endchoice +config ATMEL_SFR + bool + default n + config SYS_SOC default "at91"
arch/arm/mach-at91/Makefile +3 -2
@@ -7,10 +7,11 @@ obj-$(CONFIG_AT91SAM9G20) += sdram.o spl_at91.o obj-$(CONFIG_AT91SAM9M10G45) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9N12) += mpddrc.o spl_at91.o obj-$(CONFIG_AT91SAM9X5) += mpddrc.o spl_at91.o -obj-$(CONFIG_SAMA5D2) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o atmel_sfr.o +obj-$(CONFIG_SAMA5D2) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o obj-$(CONFIG_SAMA5D3) += bootparams_atmel.o mpddrc.o spl_atmel.o -obj-$(CONFIG_SAMA5D4) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o atmel_sfr.o +obj-$(CONFIG_SAMA5D4) += bootparams_atmel.o mpddrc.o spl_atmel.o matrix.o obj-y += spl.o +obj-$(CONFIG_ATMEL_SFR) += atmel_sfr.o endif obj-y += clock.o
arch/arm/mach-at91/atmel_sfr.c +3 -0
@@ -9,6 +9,7 @@#include <asm/io.h> #include <asm/arch/sama5_sfr.h> +#if defined(CONFIG_SAMA5D2 ) || defined(CONFIG_SAMA5D4 )void redirect_int_from_saic_to_aic (void ) {struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR ;
@@ -26,3 +27,5 @@ void configure_2nd_sram_as_l2_cache(void) writel(1, &sfr->l2cc_hramc); } +#endif +
Signature · 1 line
2.7.4
PATCH 4/7 ARM: at91: sfr: implement DDR input buffers open function
In reply to Eugen.Hristev at microchip.comFrom: Eugen Hristev <[email protected]>
Add a function in SFR implementation that will open the DDR input buffers.
This can be called at DRAM initialization time.
--- arch/arm/mach-at91/atmel_sfr.c | 11 +++++++++++ arch/arm/mach-at91/include/mach/at91_common.h | 3 +++ 2 files changed, 14 insertions(+)
arch/arm/mach-at91/atmel_sfr.c +11 -0
@@ -29,3 +29,14 @@ void configure_2nd_sram_as_l2_cache(void) }#endif +void configure_ddrcfg_input_buffers (bool open) +{ +struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR ; + +if (open) +writel (ATMEL_SFR_DDRCFG_FDQIEN |ATMEL_SFR_DDRCFG_FDQSIEN , + &sfr->ddrcfg); +else +writel (0 , &sfr->ddrcfg); +} +
arch/arm/mach-at91/include/mach/at91_common.h +3 -0
@@ -35,6 +35,9 @@ void at91_disable_wdt(void);void matrix_init (void );void redirect_int_from_saic_to_aic (void );void configure_2nd_sram_as_l2_cache (void ); +#ifdef CONFIG_ATMEL_SFR +void configure_ddrcfg_input_buffers (bool open); +#endif int at91_set_ethaddr (int offset);int at91_video_show_board_info (void );
Signature · 1 line
2.7.4
PATCH 5/7 board: laird: wb50n: use configure_ddrcfg_input_buffers
In reply to Eugen.Hristev at microchip.comFrom: Eugen Hristev <[email protected]>
Replace code with new function configure_ddrcfg_input_buffers from SFR mach driver.
--- arch/arm/mach-at91/Kconfig | 1 + board/laird/wb50n/wb50n.c | 4 +--- 2 files changed, 2 insertions(+), 3 deletions(-)
arch/arm/mach-at91/Kconfig +1 -0
@@ -292,6 +292,7 @@ config TARGET_WB50N select BOARD_LATE_INIT select CPU_V7A select SUPPORT_SPL + select ATMEL_SFR endchoice
board/laird/wb50n/wb50n.c +1 -3
@@ -172,13 +172,11 @@ static void ddr2_conf(struct atmel_mpddrc_config *ddr2)void mem_init (void ) { -struct atmel_sfr *sfr = (struct atmel_sfr *)ATMEL_BASE_SFR ;struct atmel_mpddrc_config ddr2;ddr2_conf (&ddr2); -writel (ATMEL_SFR_DDRCFG_FDQIEN |ATMEL_SFR_DDRCFG_FDQSIEN , - &sfr->ddrcfg); +configure_ddrcfg_input_buffers (true);/* enable MPDDR clock */ at91_periph_clk_enable (ATMEL_ID_MPDDRC );
Signature · 1 line
2.7.4
PATCH 6/7 ARM: at91: mpddrc: add lpddr2 initialization procedure
In reply to Eugen.Hristev at microchip.comFrom: Eugen Hristev <[email protected]>
Implement the lpddr2 initialization procedure for at91 mpddrc multi-port ddram controller.
--- arch/arm/mach-at91/include/mach/atmel_mpddrc.h | 23 ++++ arch/arm/mach-at91/mpddrc.c | 162 +++++++++++++++++++++++++ 2 files changed, 185 insertions(+)
arch/arm/mach-at91/include/mach/atmel_mpddrc.h +23 -0
@@ -18,6 +18,9 @@ struct atmel_mpddrc_config {u32 tpr1;u32 tpr2;u32 md; +u32 lpddr23_lpr; +u32 cal_mr4; +u32 tim_cal; };/*
@@ -61,6 +64,10 @@ int ddr2_init(const unsigned int base,const unsigned int ram_address, const struct atmel_mpddrc_config *mpddr_value); +int lpddr2_init (const unsigned int base, +const unsigned int ram_address, +const struct atmel_mpddrc_config *mpddr_value); +int ddr3_init (const unsigned int base,const unsigned int ram_address,const struct atmel_mpddrc_config *mpddr_value);
@@ -74,6 +81,11 @@ int ddr3_init(const unsigned int base,#define ATMEL_MPDDRC_MR_MODE_EXT_LMR_CMD 0x5#define ATMEL_MPDDRC_MR_MODE_DEEP_CMD 0x6#define ATMEL_MPDDRC_MR_MODE_LPDDR2_CMD 0x7 +#define ATMEL_MPDDRC_MR_MRS (v) (((v) & 0xFF) << 0x8) + +/* Bit field in refresh timer register */ +#define ATMEL_MPDDRC_RTR_ADJ_REF (0x1 << 16) +#define ATMEL_MPDDRC_RTR_MR4VALUE (v) (((v) & 0x7) << 20)/* Bit field in configuration register */ #define ATMEL_MPDDRC_CR_NC_MASK 0x3
@@ -157,6 +169,7 @@ int ddr3_init(const unsigned int base,#define ATMEL_MPDDRC_MD_DDR3_SDRAM 0x4#define ATMEL_MPDDRC_MD_LPDDR3_SDRAM 0x5#define ATMEL_MPDDRC_MD_DDR2_SDRAM 0x6 +#define ATMEL_MPDDRC_MD_LPDDR2_SDRAM 0x7#define ATMEL_MPDDRC_MD_DBW_MASK (0x1 << 4)#define ATMEL_MPDDRC_MD_DBW_32_BITS (0x0 << 4)#define ATMEL_MPDDRC_MD_DBW_16_BITS (0x1 << 4)
@@ -206,4 +219,14 @@ int ddr3_init(const unsigned int base,#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_TWO_CYCLE 0x2#define ATMEL_MPDDRC_RD_DATA_PATH_SHIFT_THREE_CYCLE 0x3 +/* Bit field in LPDDR2 - LPDDR3 Low Power Register */ +#define ATMEL_MPDDRC_LPDDR23_LPR_DS (x) (((x) & 0xf) << 24) + +/* Bit field in CAL_MR4 Calibration and MR4 Register */ +#define ATMEL_MPDDRC_CAL_MR4_COUNT_CAL (x) (((x) & 0xffff) << 0) +#define ATMEL_MPDDRC_CAL_MR4_MR4R (x) (((x) & 0xffff) << 16) + +/* Bit field in TIM_CAL Timing Calibration Register */ +#define ATMEL_MPDDRC_CALR_ZQCS (x) (((x) & 0xff) << 0) +#endif
arch/arm/mach-at91/mpddrc.c +162 -0
177 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 7/7 board: atmel: sama5d2_wlsom1_ek: add SPL support
In reply to Eugen.Hristev at microchip.comFrom: Eugen Hristev <[email protected]>
Add support for SPL for this board: DRAM initialization, PMC initialization, MMC boot.
--- arch/arm/mach-at91/Kconfig | 1 + .../atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c | 147 +++++++++++++++++++++ configs/sama5d27_wlsom1_ek_mmc_defconfig | 25 +++- include/configs/sama5d27_wlsom1_ek.h | 16 ++- 4 files changed, 185 insertions(+), 4 deletions(-)
arch/arm/mach-at91/Kconfig +1 -0
@@ -189,6 +189,7 @@ config TARGET_SAMA5D27_WLSOM1_EK select BOARD_EARLY_INIT_F select BOARD_LATE_INIT select CPU_V7A + select SUPPORT_SPL help The SAMA5D27 WLSOM1 embeds SAMA5D2 SiP (System in Package), a 64Mbit QSPI flash with Mac-address, KSZ8081 Phy. A wireless
board/atmel/sama5d27_wlsom1_ek/sama5d27_wlsom1_ek.c +147 -0
150 lines not on this page · raw message
configs/sama5d27_wlsom1_ek_mmc_defconfig +23 -2
@@ -2,12 +2,20 @@ CONFIG_ARM=y CONFIG_ARCH_AT91=y CONFIG_SYS_TEXT_BASE=0x26f00000 CONFIG_TARGET_SAMA5D27_WLSOM1_EK=y +CONFIG_SPL_GPIO_SUPPORT=y +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y CONFIG_SYS_MALLOC_F_LEN=0x2000 +CONFIG_SPL_MMC_SUPPORT=y +CONFIG_SPL_SERIAL_SUPPORT=y +CONFIG_SPL_DRIVERS_MISC_SUPPORT=y CONFIG_ENV_SIZE=0x4000 +CONFIG_SPL=y CONFIG_DEBUG_UART_BOARD_INIT=y CONFIG_DEBUG_UART_BASE=0xf801c000 CONFIG_DEBUG_UART_CLOCK=82000000 -CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_wlsom1_ek" +CONFIG_SPL_FS_FAT=y +CONFIG_SPL_LIBDISK_SUPPORT=y CONFIG_DEBUG_UART=y CONFIG_ENV_VARS_UBOOT_CONFIG=y CONFIG_FIT=y
@@ -15,9 +23,13 @@ CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2" CONFIG_SD_BOOT=y CONFIG_BOOTDELAY=3 CONFIG_USE_BOOTARGS=y -CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait" +CONFIG_MISC_INIT_R=y # CONFIG_DISPLAY_BOARDINFO is not set CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_TEXT_BASE=0x200000 +CONFIG_SPL_SEPARATE_BSS=y +CONFIG_SPL_DISPLAY_PRINT=y +# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set CONFIG_HUSH_PARSER=y CONFIG_CMD_BOOTZ=y # CONFIG_CMD_FLASH is not set
@@ -31,9 +43,15 @@ CONFIG_CMD_PING=y CONFIG_CMD_EXT4=y CONFIG_CMD_FAT=y CONFIG_OF_CONTROL=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d27_wlsom1_ek" +CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" CONFIG_ENV_IS_IN_FAT=y CONFIG_DM=y +CONFIG_SPL_DM=y +CONFIG_SPL_DM_SEQ_ALIAS=y CONFIG_CLK=y +CONFIG_SPL_CLK=y CONFIG_CLK_AT91=y CONFIG_AT91_UTMI=y CONFIG_AT91_H32MX=y
@@ -56,6 +74,7 @@ CONFIG_PHY_MICREL=y CONFIG_DM_ETH=y CONFIG_MACB=y CONFIG_PINCTRL=y +CONFIG_SPL_PINCTRL=y CONFIG_PINCTRL_AT91PIO4=y CONFIG_DM_SERIAL=y CONFIG_DEBUG_UART_ATMEL=y
@@ -64,9 +83,11 @@ CONFIG_ATMEL_USART=y CONFIG_SPI=y CONFIG_DM_SPI=y CONFIG_TIMER=y +CONFIG_SPL_TIMER=y CONFIG_ATMEL_PIT_TIMER=y CONFIG_W1=y CONFIG_W1_GPIO=y CONFIG_W1_EEPROM=y CONFIG_W1_EEPROM_DS24XXX=y CONFIG_OF_LIBFDT_OVERLAY=y +# CONFIG_EFI_LOADER_HII is not set
include/configs/sama5d27_wlsom1_ek.h +14 -2
@@ -19,16 +19,28 @@#define CONFIG_SYS_SDRAM_BASE 0x20000000#define CONFIG_SYS_SDRAM_SIZE 0x10000000 +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_INIT_SP_ADDR 0x218000 +#else #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE) +#endif #define CONFIG_SYS_LOAD_ADDR 0x22000000/* load address */ -/* NAND flash */ -#undef CONFIG_CMD_NAND +/* SPL */ +#define CONFIG_SPL_TEXT_BASE 0x200000 +#define CONFIG_SPL_MAX_SIZE 0x10000 +#define CONFIG_SPL_BSS_START_ADDR 0x20000000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 +#define CONFIG_SYS_SPL_MALLOC_START 0x20080000 +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 + +#define CONFIG_SYS_MONITOR_LEN (512 << 10)#ifdef CONFIG_SD_BOOT #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"#endif #endif
Signature · 1 line
2.7.4