Add Cavium ARCH_THUNDER2 platform
Subsystems (2)
v2 cover Add Cavium ARCH_THUNDER2 platform
Here's the updated patchset, please let me know if thereare any comments. If a pull request is needed(with a public git tree), I can set one up on github.
This patchset adds support for the new ThunderX2 CN99XX processor family.
Changes are to add: the config option, the required device tree files, the device tree bindings documentation and the defconfig entry.
Changes from v1 -> v2:
* split Kconfig.platforms changes and device tree changes
* Added MAINTAINERS entry
JC.
Jayachandran C (5):
arm64: add THUNDER2 processor family
MAINTAINERS: Add Cavium ThunderX2 entry
arm64: dts: add device trees for ARCH_THUNDER2
dt-bindings: arm64 ARCH_THUNDER2 platform documentation
arm64: add ARCH_THUNDER2 to defconfig
.../devicetree/bindings/arm/cavium-thunder2.txt | 5 + Documentation/devicetree/bindings/arm/cpus.txt | 1 + MAINTAINERS | 7 + arch/arm64/Kconfig.platforms | 7 + arch/arm64/boot/dts/cavium/Makefile | 1 + arch/arm64/boot/dts/cavium/thunder-99xx.dts | 34 +++++ arch/arm64/boot/dts/cavium/thunder-99xx.dtsi | 147 +++++++++++++++++++++ arch/arm64/configs/defconfig | 1 + 8 files changed, 203 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/cavium-thunder2.txt create mode 100644 arch/arm64/boot/dts/cavium/thunder-99xx.dts create mode 100644 arch/arm64/boot/dts/cavium/thunder-99xx.dtsi
Signature · 1 line
2.7.4
PATCH v2 1/5 arm64: add THUNDER2 processor family
Add support for ThunderX2 CN99XX arm64 server processors.
Introduce a new arm64 platform config option ARCH_THUNDER2 for these processors.
--- arch/arm64/Kconfig.platforms | 7 +++++++ 1 file changed, 7 insertions(+)
arch/arm64/Kconfig.platforms +7 -0
@@ -190,6 +190,13 @@ config ARCH_THUNDER help This enables support for Cavium's Thunder Family of SoCs. +config ARCH_THUNDER2 + bool "Cavium ThunderX2 Server Processors" + select GPIOLIB + help + This enables support for Cavium's ThunderX2 CN99XX family of + server processors. + config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" select ARCH_HAS_RESET_CONTROLLER
Signature · 1 line
2.7.4
Arnd Bergmann
AppliedPATCH v2 1/5 arm64: add THUNDER2 processor family
Quoted 19 lines · CET Jayachandran C
Add support for ThunderX2 CN99XX arm64 server processors.
Introduce a new arm64 platform config option
ARCH_THUNDER2for these processors.Signed-off-by Jayachandran C <[email protected]>--- arch/arm64/Kconfig.platforms | 7 +++++++ 1 file changed, 7 insertions(+)arch/arm64/Kconfig.platforms +0
-0@@ -190,6 +190,13 @@ config ARCH_THUNDER help This enables support for Cavium's Thunder Family of SoCs.
arch/arm64/Kconfig.platforms config ARCH_THUNDER · line 202
Quoted 10 lines
arch/arm64/Kconfig.platforms +7
-0+config ARCH_THUNDER2 + bool "Cavium ThunderX2 Server Processors" + select GPIOLIB + help + This enables support for Cavium's ThunderX2 CN99XX family of + server processors. + config ARCH_UNIPHIER bool "Socionext UniPhier SoC Family" select ARCH_HAS_RESET_CONTROLLER
Applied this one to next/arm64, thanks!
Arnd
PATCH v2 2/5 MAINTAINERS: Add Cavium ThunderX2 entry
In reply to Jayachandran CAdd maintainer information for Cavium ThunderX2 ARM64 processor family.
--- MAINTAINERS | 7 +++++++ 1 file changed, 7 insertions(+)
MAINTAINERS +7 -0
@@ -2972,6 +2972,13 @@ S: Maintained F: drivers/iio/light/cm* F: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst +CAVIUM THUNDERX2 ARM64 SOC +M: Jayachandran C <[email protected]> +L: linux-arm-kernel at lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm64/boot/dts/cavium/thunder-99xx* +F: Documentation/devicetree/bindings/arm/cavium-thunder2.txt + CAVIUM I2C DRIVER M: Jan Glauber <[email protected]> M: David Daney <[email protected]>
Signature · 1 line
2.7.4
Arnd Bergmann
AppliedPATCH v2 2/5 MAINTAINERS: Add Cavium ThunderX2 entry
Quoted 4 lines · CET Jayachandran C
Add maintainer information for Cavium ThunderX2 ARM64 processor family.
Signed-off-by Jayachandran C <[email protected]>
Applied to next/soc, thanks!
Arnd
PATCH v2 3/5 arm64: dts: add device trees for ARCH_THUNDER2
In reply to Jayachandran CAdd device tree files for Cavium's ThunderX2 CN99XX arm64 server processors. The file cavium/thunder-99xx.dtsi has been added for the CPU and on-chip devices, and cavium/thunder-99xx.dts has been added for the evaluation board using the chip.
Update the Makefile to build the thunder-99xx.dtb when the ARCH_THUNDER2 option is selected.
--- arch/arm64/boot/dts/cavium/Makefile | 1 + arch/arm64/boot/dts/cavium/thunder-99xx.dts | 34 +++++++ arch/arm64/boot/dts/cavium/thunder-99xx.dtsi | 147 +++++++++++++++++++++++++++ 3 files changed, 182 insertions(+) create mode 100644 arch/arm64/boot/dts/cavium/thunder-99xx.dts create mode 100644 arch/arm64/boot/dts/cavium/thunder-99xx.dtsi
arch/arm64/boot/dts/cavium/Makefile +1 -0
@@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb +dtb-$(CONFIG_ARCH_THUNDER2) += thunder-99xx.dtb always := $(dtb-y) subdir-y := $(dts-dirs)
arch/arm64/boot/dts/cavium/thunder-99xx.dts new file +34 -0
@@ -0,0 +1,34 @@ +/* + * dts file for Cavium ThunderX2 CN99XX based Evaluation Boards + * + * Copyright (c) 2017 Cavium Inc. + * Copyright (c) 2013-2016 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "thunder-99xx.dtsi" + +/ { + model = "Cavium ThunderX2 CN99XX"; + compatible = "cavium,thunder-99xx"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000 0x0 0x80000000>, /* 2G @ 2G */ + <0x00000008 0x80000000 0x0 0x80000000>; /* 2G @ 34G */ + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +};
arch/arm64/boot/dts/cavium/thunder-99xx.dtsi new file +147 -0
147 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH v2 4/5 dt-bindings: arm64 ARCH_THUNDER2 platform documentation
In reply to Jayachandran CAdd documentation for Cavium ThunderX2 CN99XX ARM64 processor family. The processor core will use the ID "cavium,thunder2" and the SoC will use the ID "cavium,thunder-99xx".
--- Documentation/devicetree/bindings/arm/cavium-thunder2.txt | 5 +++++ Documentation/devicetree/bindings/arm/cpus.txt | 1 + 2 files changed, 6 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/cavium-thunder2.txt
Documentation/devicetree/bindings/arm/cavium-thunder2.txt new file +5 -0
@@ -0,0 +1,5 @@ +Cavium Thunder2 Family device tree bindings +------------------------------------------- + +Boards with Cavium ThunderX2 CN99XX shall have the root property: + compatible = "cavium,thunder-99xx";
Documentation/devicetree/bindings/arm/cpus.txt +1 -0
@@ -169,6 +169,7 @@ nodes to be present and contain the properties described below. "brcm,brahma-b15" "brcm,vulcan" "cavium,thunder" + "cavium,thunder2" "faraday,fa526" "intel,sa110" "intel,sa1100"
Signature · 1 line
2.7.4
PATCH v2 5/5 arm64: add ARCH_THUNDER2 to defconfig
In reply to Jayachandran CThis will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors.
--- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+)
arch/arm64/configs/defconfig +1 -0
@@ -53,6 +53,7 @@ CONFIG_ARCH_STRATIX10=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_SPRD=y CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_THUNDER2=y CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VULCAN=y
Signature · 1 line
2.7.4
Arnd Bergmann
AppliedPATCH v2 5/5 arm64: add ARCH_THUNDER2 to defconfig
Quoted 4 lines · CET Jayachandran C
This will allow the default kernel build to boot on Cavium ThunderX2 CN99XX processors.
Signed-off-by Jayachandran C <[email protected]>
Applied to next/arm64, thanks!
Arnd
v2 cover Add Cavium ARCH_THUNDER2 platform
In reply to Jayachandran CLe 02/04/17 ? 16:57, Jayachandran C a ?crit :
Quoted 7 lines
Here's the updated patchset, please let me know if thereare any comments. If a pull request is needed(with a public git tree), I can set one up on github.
This patchset adds support for the new ThunderX2 CN99XX processor family.
Quoted 6 lines
Changes are to add: the config option, the required device tree files, the device tree bindings documentation and the defconfig entry.
Changes from v1 -> v2:
* splitKconfig.platformschanges and device tree changes
* AddedMAINTAINERSentry
Does that mean support for Broadcom Vulcan should be removed then? If do, do you mind doing that?
Signature · 1 line
Florian
v2 cover Add Cavium ARCH_THUNDER2 platform
Quoted 11 lines · Florian Fainelli
Le 02/04/17 ? 16:57, Jayachandran C a ?crit :
Quoted 10 lines
Here's the updated patchset, please let me know if thereare any comments. If a pull request is needed(with a public git tree), I can set one up on github.
This patchset adds support for the new ThunderX2 CN99XX processor family.
Changes are to add: the config option, the required device tree files, the device tree bindings documentation and the defconfig entry.
Quoted 6 lines
Quoted 3 lines
Changes from v1 -> v2:
* splitKconfig.platformschanges and device tree changes
* AddedMAINTAINERSentryDoes that mean support for Broadcom Vulcan should be removed then? If do, do you mind doing that?
I will send patches for removing ARCH_VULCAN once ARCH_THUNDER2 is merged and the driver dependencies are updated by another set of patches. Otherwise we have a problem (especially in distribution config files) of not being able to select the drivers (for SPI, GPIO and I2C) for the platform.
Thanks,
JC.