Skip to contentSkip to conversation

Wierd /proc/cpuinfo with 2.4.11-pre4

DISCUSSION Dan Merillat 5 participants 9 messages Oct 5, 2001 – Oct 6, 2001

lore
Share & tools
lore
#0 lore raw
Quoted 2 lines

From dmesg:

CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0 Intel Pentium with F0 0F bug - workaround enabled.
Intel old style machine check architecture supported. Intel old style machine check reporting enabled on CPU#0.

CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0b

Checking 'hlt' instruction... OK.

Looks normal. Let's see /proc/cpuinfo...

processor : 0
vendor_id : GenuineIntel
cpu family : 5
model : 2
model name : Pentium 75 - 200
stepping : 11
cpu MHz : 132.634
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr mce cx8
bogomips : 264.60

processor : 1
vendor_id : unknown
cpu family : 0
model : 0
model name : unknown
stepping : 16
cpu MHz : 132.634
fdiv_bug : no
hlt_bug : no
f00f_bug : yes
coma_bug : yes
fpu : yes
fpu_exception : yes
cpuid level : 0
wp : yes
flags : fpu vme de pse tsc 3dnow lrti
bogomips : 0.02

processor : 2
vendor_id : ��0��0�
cpu family : 156
model : 48
model name : �
stepping : 192
cpu MHz : 132.634
cache size : 0 KB
fdiv_bug : yes
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 0
wp : yes
flags : fpu de tsc msr pae mce apic pge cmov pat clflush dts ia64 recovery longrun lrti
bogomips : 644790.84

processor : 3
vendor_id : L�)�
cpu family : 86
model : 41
model name : ��0���0�
stepping : 192
cache size : 0 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1048575
wp : no
flags : syscall 3dnowext 3dnow
bogomips : 0.00

processor : 4
vendor_id : ��)���)�}�)�y�)�u�)�p�)�
cpu family : 0
model : 0
model name : u�)�p�)�
stepping : 0
cpu MHz : 132.634
fdiv_bug : yes
hlt_bug : yes
f00f_bug : yes
coma_bug : yes
fpu : no
fpu_exception : no
cpuid level : 1
wp : no
flags : fpu tsc msr pae mce apic pge cmov pat clflush dts ia64 syscall 3dnowext 3dnow recovery lrti cxmmx centaur_mcr
bogomips : 0.00

processor : 5
vendor_id : unknown
cpu family : 0
model : 0
model name : unknown
stepping : 0
fdiv_bug : yes
hlt_bug : yes
f00f_bug : no
coma_bug : yes
fpu : no
fpu_exception : no
cpuid level : 0
wp : no
flags : cxmmx k6_mtrr cyrix_arr
bogomips : 0.00

processor : 6
vendor_id : unknown
cpu family : 0
model : 0
model name : unknown
stepping : 0
cache size : 0 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : no
coma_bug : no
fpu : no
fpu_exception : no
cpuid level : 0
wp : no
flags :
bogomips : 0.00

processor : 7
vendor_id : unknown
cpu family : 0
model : 0
model name : unknown
stepping : 0
cache size : 515 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : yes
coma_bug : yes
fpu : no
fpu_exception : no
cpuid level : 0
wp : no
flags :
bogomips : 644464.70

Wow! That's pretty impressive, a new kernel build gives me an additional _7_ CPUs!

Interesting bits of .config:

CONFIG_M586TSC=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set

Won't compile with UP APIC turned on, as others have noted.

Aside from /bin/ps getting confused about the system capabilities, it seems stable.

--Dan

#1 lore raw
Quoted 15 lines · Dan Merillat

From dmesg:
CPU: Before vendor init, caps: 000001bf 00000000 00000000, vendor = 0 Intel Pentium with F0 0F bug - workaround enabled.
Intel old style machine check architecture supported. Intel old style machine check reporting enabled on CPU#0.

CPU: After vendor init, caps: 000001bf 00000000 00000000 00000000
CPU:     After generic, caps: 000001bf 00000000 00000000 00000000
CPU:             Common caps: 000001bf 00000000 00000000 00000000
CPU: Intel Pentium 75 - 200 stepping 0b

Checking 'hlt' instruction... OK.

Looks normal. Let's see /proc/cpuinfo...

processor : 0

[snip]

Quoted 35 lines

processor : 7
vendor_id : unknown
cpu family : 0
model : 0
model name : unknown
stepping : 0
cache size : 515 KB
fdiv_bug : no
hlt_bug : yes
f00f_bug : yes
coma_bug : yes
fpu : no
fpu_exception : no
cpuid level : 0
wp : no
flags :
bogomips : 644464.70

Wow! That's pretty impressive, a new kernel build gives me an additional _7_ CPUs!

Interesting bits of .config:

CONFIG_M586TSC=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_SMP is not set
# CONFIG_X86_UP_APIC is not set
# CONFIG_X86_UP_IOAPIC is not set

Quoted 4 lines

Won't compile with UP APIC turned on, as others have noted.

Aside from /bin/ps getting confused about the system capabilities, it seems stable.

Same 8-processor incorrect info on my PIII Dell laptop -
redirecting '/usr/bin/top' stderr gets this:

[asuardi@dolphin linux]$ cat x fscanf failed on /proc/stat for cpu 1 fscanf failed on /proc/stat for cpu 2 fscanf failed on /proc/stat for cpu 3 fscanf failed on /proc/stat for cpu 4 fscanf failed on /proc/stat for cpu 5 fscanf failed on /proc/stat for cpu 6 fscanf failed on /proc/stat for cpu 7 fscanf failed on /proc/stat for cpu 1

So I'd assume anything touching /proc/cpuinfo is hosed.

--alessandro

"this is no time to get cute, it's a mad dog's promenade
so walk tall, or baby don't walk at all"
(Bruce Springsteen, 'New York City Serenade')

#2 lore raw
Quoted 2 lines
Quoted 2 lines

Wow! That's pretty impressive, a new kernel build gives me an additional _7_ CPUs!

Sorry. Mea culpa

setup.c renamed from setup.c.old +1 -1
@@ -2420,7 +2420,7 @@
 	 * WARNING - nasty evil hack ... if we print > 8, it overflows the
 	 * page buffer and corrupts memory - this needs fixing properly
 	 */
-	for (n = 0; n < 8; n++, c++) {
+	for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
 	/* for (n = 0; n < NR_CPUS; n++, c++) { */
 		int fpu_exception;
 #ifdef CONFIG_SMP

M.

PS. I just tested this since my last post. It seems to work.

#3 lore raw
Quoted 18 lines · Martin J. Bligh
Quoted 3 lines
Quoted 3 lines

Wow! That's pretty impressive, a new kernel build gives me an additional _7_ CPUs!

Sorry. Mea culpa

setup.c Fri Oct 5 14:28:51 2001 renamed from setup.c.old Fri Oct 5 14:20:29 2001 +1 -1
@@ -2420,7 +2420,7 @@
         * WARNING - nasty evil hack ... if we print > 8, it overflows the
         * page buffer and corrupts memory - this needs fixing properly
         */
-       for (n = 0; n < 8; n++, c++) {
+       for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
        /* for (n = 0; n < NR_CPUS; n++, c++) { */
                int fpu_exception;
 #ifdef CONFIG_SMP
Quoted 3 lines

M.

PS. I just tested this since my last post. It seems to work.

Doesn't build here...

gcc -D__KERNEL__ -I/share/src/linux-2.4.11-pre4/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -pipe -mpreferred-stack-boundary=2
-march=i686 -c -o setup.o setup.c
setup.c: In function `get_cpuinfo':
setup.c:2423: `clustered_apic_mode' undeclared (first use in this function)
setup.c:2423: (Each undeclared identifier is reported only once
setup.c:2423: for each function it appears in.)
make[1]: *** [setup.o] Error 1
make[1]: Leaving directory `/share/src/linux-2.4.11-pre4/arch/i386/kernel'
make: *** [_dir_arch/i386/kernel] Error 2

--alessandro

"this is no time to get cute, it's a mad dog's promenade
so walk tall, or baby don't walk at all"
(Bruce Springsteen, 'New York City Serenade')

#4 lore raw
Quoted 1 line

Doesn't build here...

Looks like you need the other patch I posted here too.

M.

Combined reformated patch below:

arch/i386/kernel/setup.c +1 -1
diff -urN virgin-2.4.11-pre4/arch/i386/kernel/setup.c numa-2.4.11-pre4/arch/i386/kernel/setup.c
@@ -2420,7 +2420,7 @@
 	 * WARNING - nasty evil hack ... if we print > 8, it overflows the
 	 * page buffer and corrupts memory - this needs fixing properly
 	 */
-	for (n = 0; n < 8; n++, c++) {
+	for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
 	/* for (n = 0; n < NR_CPUS; n++, c++) { */
 		int fpu_exception;
 #ifdef CONFIG_SMP
include/asm-i386/smp.h +12 -11
diff -urN virgin-2.4.11-pre4/include/asm-i386/smp.h numa-2.4.11-pre4/include/asm-i386/smp.h
@@ -22,7 +22,7 @@
 #endif
 #endif
 
-#if CONFIG_SMP
+#ifdef CONFIG_SMP
 # ifdef CONFIG_MULTIQUAD
 #  define TARGET_CPUS 0xf     /* all CPUs in *THIS* quad */
 #  define INT_DELIVERY_MODE 0     /* physical delivery on LOCAL quad */
@@ -31,9 +31,20 @@
 #  define INT_DELIVERY_MODE 1     /* logical delivery broadcast to all procs */
 # endif
 #else
+# define INT_DELIVERY_MODE 0     /* physical delivery on LOCAL quad */
 # define TARGET_CPUS 0x01
 #endif
 
+#ifndef clustered_apic_mode
+ #ifdef CONFIG_MULTIQUAD
+  #define clustered_apic_mode (1)
+  #define esr_disable (1)
+ #else /* !CONFIG_MULTIQUAD */
+  #define clustered_apic_mode (0)
+  #define esr_disable (0)
+ #endif /* CONFIG_MULTIQUAD */
+#endif 
+
 #ifdef CONFIG_SMP
 #ifndef ASSEMBLY
 
@@ -76,16 +87,6 @@
 extern volatile int physical_apicid_to_cpu[MAX_APICID];
 extern volatile int cpu_to_logical_apicid[NR_CPUS];
 extern volatile int logical_apicid_to_cpu[MAX_APICID];
-
-#ifndef clustered_apic_mode
- #ifdef CONFIG_MULTIQUAD
-  #define clustered_apic_mode (1)
-  #define esr_disable (1)
- #else /* !CONFIG_MULTIQUAD */
-  #define clustered_apic_mode (0)
-  #define esr_disable (0)
- #endif /* CONFIG_MULTIQUAD */
-#endif 
 
 /*
  * General functions that each host system must provide.
#5 lore raw
Quoted 3 lines · Martin J. Bligh
Quoted 1 line

Doesn't build here...

Looks like you need the other patch I posted here too.

Thanks, builds - boots - fixes /proc/cpuinfo on my UP :)

Quoted 55 lines

Combined reformated patch below:

diff -urN virgin-2.4.11-pre4/arch/i386/kernel/setup.c numa-2.4.11-pre4/arch/i386/kernel/setup.c

arch/i386/kernel/setup.c +1 -1
@@ -2420,7 +2420,7 @@
 	 * WARNING - nasty evil hack ... if we print > 8, it overflows the
 	 * page buffer and corrupts memory - this needs fixing properly
 	 */
-	for (n = 0; n < 8; n++, c++) {
+	for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
 	/* for (n = 0; n < NR_CPUS; n++, c++) { */
 		int fpu_exception;
 #ifdef CONFIG_SMP

diff -urN virgin-2.4.11-pre4/include/asm-i386/smp.h numa-2.4.11-pre4/include/asm-i386/smp.h

include/asm-i386/smp.h +12 -4
@@ -22,7 +22,7 @@
 #endif
 #endif
 
-#if CONFIG_SMP
+#ifdef CONFIG_SMP
 # ifdef CONFIG_MULTIQUAD
 #  define TARGET_CPUS 0xf     /* all CPUs in *THIS* quad */
 #  define INT_DELIVERY_MODE 0     /* physical delivery on LOCAL quad */
@@ -31,9 +31,20 @@
 #  define INT_DELIVERY_MODE 1     /* logical delivery broadcast to all procs */
 # endif
 #else
+# define INT_DELIVERY_MODE 0     /* physical delivery on LOCAL quad */
 # define TARGET_CPUS 0x01
 #endif
 
+#ifndef clustered_apic_mode
+ #ifdef CONFIG_MULTIQUAD
+  #define clustered_apic_mode (1)
+  #define esr_disable (1)
+ #else /* !CONFIG_MULTIQUAD */
+  #define clustered_apic_mode (0)
+  #define esr_disable (0)
+ #endif /* CONFIG_MULTIQUAD */
+#endif 
+
 #ifdef CONFIG_SMP
 #ifndef ASSEMBLY
 
@@ -76,16 +87,6 @@
 extern volatile int physical_apicid_to_cpu[MAX_APICID];
 extern volatile int cpu_to_logical_apicid[NR_CPUS];
 extern volatile int logical_apicid_to_cpu[MAX_APICID];
-
-#ifndef clustered_apic_mode
- #ifdef CONFIG_MULTIQUAD

include/asm-i386/smp.h line 92

Quoted 10 lines
include/asm-i386/smp.h +0 -7
-  #define clustered_apic_mode (1)
-  #define esr_disable (1)
- #else /* !CONFIG_MULTIQUAD */
-  #define clustered_apic_mode (0)
-  #define esr_disable (0)
- #endif /* CONFIG_MULTIQUAD */
-#endif 
 
 /*
  * General functions that each host system must provide.

--alessandro

"this is no time to get cute, it's a mad dog's promenade
so walk tall, or baby don't walk at all"
(Bruce Springsteen, 'New York City Serenade')

#6 lore raw
In reply to Martin J. Bligh
Quoted 14 lines · Alessandro Suardi

setup.c Fri Oct 5 14:28:51 2001 line 2426

Quoted 13 lines · Martin J. Bligh

Sorry. Mea culpa

setup.c Fri Oct 5 14:28:51 2001 renamed from setup.c.old Fri Oct 5 14:20:29 2001 +1 -1
@@ -2420,7 +2420,7 @@
         * WARNING - nasty evil hack ... if we print > 8, it overflows the
         * page buffer and corrupts memory - this needs fixing properly
         */
-       for (n = 0; n < 8; n++, c++) {
+       for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
        /* for (n = 0; n < NR_CPUS; n++, c++) { */
                int fpu_exception;
 #ifdef CONFIG_SMP

This will also fail if, for some reason "clustered_apic_mode" is set and you have less than 8 CPUs. What you really want is to have "max(8:NR_CPUS)" in the loop (or make the loop actually work with > 8 CPUs, which is probably the correct solution in the long run).

Cheers, Andreas
--
Andreas Dilger \ "If a man ate a pound of pasta and a pound of antipasto,
\ would they cancel out, leaving him still hungry?"
http://www-mddsp.enel.ucalgary.ca/People/adilger/ -- Dogbert

#7 lore raw
Quoted 4 lines

This will also fail if, for some reason "clustered_apic_mode" is set and you have less than 8 CPUs. What you really want is to have "max(8:NR_CPUS)" in the loop (or make the loop actually work with > 8 CPUs, which is probably the correct solution in the long run).

Nope, the cpu_online map should catch this. NR_CPUS is always 32 in SMP mode.

in get_cpuinfo ....

                if (!(cpu_online_map & (1<<n)))
                        continue;

I didn't notice that this would only work in SMP mode.

It's a horrible hack, but it's less horrible than corrupting memory randomly ;-)

M.

#8 lore raw
In reply to Martin J. Bligh
Quoted 18 lines · Martin J. Bligh
Quoted 3 lines
Quoted 3 lines

Wow! That's pretty impressive, a new kernel build gives me an additional _7_ CPUs!

Sorry. Mea culpa

setup.c Fri Oct 5 14:28:51 2001 renamed from setup.c.old Fri Oct 5 14:20:29 2001 +1 -1
@@ -2420,7 +2420,7 @@
         * WARNING - nasty evil hack ... if we print > 8, it overflows the
         * page buffer and corrupts memory - this needs fixing properly
         */
-       for (n = 0; n < 8; n++, c++) {
+       for (n = 0; n < (clustered_apic_mode ? 8 : NR_CPUS); n++, c++) {
        /* for (n = 0; n < NR_CPUS; n++, c++) { */
                int fpu_exception;
 #ifdef CONFIG_SMP
Quoted 3 lines

M.

PS. I just tested this since my last post. It seems to work.

It would be more appropriate to do:

	for (n = 0; n < min(8, NR_CPUS); n++, c++) {
Signature · 1 line
						Brian Gerst