Skip to contentSkip to conversation

ath10k: improve throughout of tcp/udp TX/RX of sdio

PATCH Superseded Wen Gong 3 participants 24 messages Aug 28, 2019 – Sep 4, 2019 Qualcomm Atheros ATH10K wireless driver

v3 of 10 Superseded Latest is v10 →

lore
Share & tools
lore

Wen Gong

author
#0 lore raw

v3 cover ath10k: improve throughout of tcp/udp TX/RX of sdio

The bottleneck of throughout on sdio chip is the bus bandwidth, to the patches are all to increase the use ratio of sdio bus.

udp-rx udp-tx tcp-rx tcp-tx

without patches(Mbps)  320        180       170       151
with patches(Mbps)     450        410       400       320

These patches only affect sdio bus chip, explanation is mentioned in each patch's commit log.

Alagu Sankar (1):
ath10k: enable RX bundle receive for sdio
v2: fix incorrect skb tail of rx bundle in ath10k_sdio_mbox_rx_process_packet
v3: change some code style
split fix incorrect skb tail of rx bundle to patch "adjust skb length in ath10k_sdio_mbox_rx_packet"

Wen Gong (7):
ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet
v2:no this patch
v2:new added

ath10k: change max RX bundle size from 8 to 32 for sdio
v2:change macro HTC_GET_BUNDLE_COUNT
v3:change some code style

ath10k: add workqueue for RX path of sdio
v2:no change
v3:change some code style

ath10k: disable TX complete indication of htt for sdio
v2:change some code style
v3:change some code style

ath10k: add htt TX bundle for sdio
v2:no change
v3:change some code style

ath10k: enable alt data of TX path for sdio
v2:no change
v3:change some code style

ath10k: enable napi on RX path for sdio
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/core.c   |  42 +++-
 drivers/net/wireless/ath/ath10k/core.h   |   4 +-
 drivers/net/wireless/ath/ath10k/hif.h    |   9 +
 drivers/net/wireless/ath/ath10k/htc.c    | 376 ++++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/htc.h    |  43 +++-
 drivers/net/wireless/ath/ath10k/htt.c    |  15 ++
 drivers/net/wireless/ath/ath10k/htt.h    |  20 +-
 drivers/net/wireless/ath/ath10k/htt_rx.c |  80 ++++++-
 drivers/net/wireless/ath/ath10k/htt_tx.c |  38 +++-
 drivers/net/wireless/ath/ath10k/hw.h     |   2 +-
 drivers/net/wireless/ath/ath10k/sdio.c   | 279 ++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/sdio.h   |  31 ++-
 12 files changed, 844 insertions(+), 95 deletions(-)
Signature · 1 line
1.9.1
author
#1 lore raw

PATCH v3 1/8 ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len).

Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet.

The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data).

Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:no this patch
v2:new added

 drivers/net/wireless/ath/ath10k/sdio.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +19 -8
index 8ed4fbd..1127e44 100644
@@ -381,16 +381,11 @@ static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar,
 	struct ath10k_htc_hdr *htc_hdr = (struct ath10k_htc_hdr *)skb->data;
 	bool trailer_present = htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT;
 	enum ath10k_htc_ep_id eid;
-	u16 payload_len;
 	u8 *trailer;
 	int ret;
 
-	payload_len = le16_to_cpu(htc_hdr->len);
-	skb->len = payload_len + sizeof(struct ath10k_htc_hdr);
-
 	if (trailer_present) {
-		trailer = skb->data + sizeof(*htc_hdr) +
-			  payload_len - htc_hdr->trailer_len;
+		trailer = skb->data + skb->len - htc_hdr->trailer_len;
 
 		eid = pipe_id_to_eid(htc_hdr->eid);
 
@@ -632,13 +627,29 @@ static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
 	struct sk_buff *skb = pkt->skb;
+	struct ath10k_htc_hdr *htc_hdr;
 	int ret;
 
 	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
 				 skb->data, pkt->alloc_len);
+
+	if (!ret) {
+		/* Update actual length. The original length may be incorrect,
+		 * as the FW will bundle multiple packets as long as their sizes
+		 * fit within the same aligned length (pkt->alloc_len).
+		 */
+		htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+		pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
+		if (pkt->act_len <= pkt->alloc_len) {
+			skb_put(skb, pkt->act_len);
+		} else {
+			ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
+				    pkt->act_len, pkt->alloc_len);
+			ret = -EMSGSIZE;
+		}
+	}
+
 	pkt->status = ret;
-	if (!ret)
-		skb_put(skb, pkt->act_len);
 
 	return ret;
 }
Signature · 1 line
1.9.1
NACKed-by on v3 1/8 NAK
#2 lore raw

Re: [PATCH v3 1/8] ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

Quoted 22 lines · Wen Gong

When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len).

Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet.

The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data).

Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available.

Quoted 5 lines

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

You are not the author of this patch, please reset the author in your git tree and resend.

Once you do that, the first line should say:
From: Nicolas Boichat <[email protected]>

Without this fix:

Quoted 63 lines

---
v2:no this patch
v2:new added

 drivers/net/wireless/ath/ath10k/sdio.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +19 -9
index 8ed4fbd..1127e44 100644
@@ -381,16 +381,11 @@ static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar,
        struct ath10k_htc_hdr *htc_hdr = (struct ath10k_htc_hdr *)skb->data;
        bool trailer_present = htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT;
        enum ath10k_htc_ep_id eid;
-       u16 payload_len;
        u8 *trailer;
        int ret;
 
-       payload_len = le16_to_cpu(htc_hdr->len);
-       skb->len = payload_len + sizeof(struct ath10k_htc_hdr);
-
        if (trailer_present) {
-               trailer = skb->data + sizeof(*htc_hdr) +
-                         payload_len - htc_hdr->trailer_len;
+               trailer = skb->data + skb->len - htc_hdr->trailer_len;
 
                eid = pipe_id_to_eid(htc_hdr->eid);
 
@@ -632,13 +627,29 @@ static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
 {
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sk_buff *skb = pkt->skb;
+       struct ath10k_htc_hdr *htc_hdr;
        int ret;
 
        ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
                                 skb->data, pkt->alloc_len);
+
+       if (!ret) {
+               /* Update actual length. The original length may be incorrect,
+                * as the FW will bundle multiple packets as long as their sizes
+                * fit within the same aligned length (pkt->alloc_len).
+                */
+               htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+               pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
+               if (pkt->act_len <= pkt->alloc_len) {
+                       skb_put(skb, pkt->act_len);
+               } else {
+                       ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
+                                   pkt->act_len, pkt->alloc_len);
+                       ret = -EMSGSIZE;
+               }
+       }
+
        pkt->status = ret;
-       if (!ret)
-               skb_put(skb, pkt->act_len);
 
        return ret;
 }
--

1.9.1

#3 lore raw

Re: [PATCH v3 1/8] ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

Quoted 30 lines · Nicolas Boichat
Quoted 22 lines · Wen Gong

When the FW bundles multiple packets, pkt->act_len may be incorrect as it refers to the first packet only (however, the FW will only bundle packets that fit into the same pkt->alloc_len).

Before this patch, the skb length would be set (incorrectly) to pkt->act_len in ath10k_sdio_mbox_rx_packet, and then later manually adjusted in ath10k_sdio_mbox_rx_process_packet.

The first problem is that ath10k_sdio_mbox_rx_process_packet does not use proper skb_put commands to adjust the length (it directly changes skb->len), so we end up with a mismatch between skb->head + skb->tail and skb->data + skb->len. This is quite serious, and causes corruptions in the TCP stack, as the stack tries to coalesce packets, and relies on skb->tail being correct (that is, skb_tail_pointer must point to the first byte_after_ the data).

Instead of re-adjusting the size in ath10k_sdio_mbox_rx_process_packet, this moves the code to ath10k_sdio_mbox_rx_packet, and also add a bounds check, as skb_put would crash the kernel if not enough space is available.

Quoted 5 lines

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

Quoted 9 lines

You are not the author of this patch, please reset the author in your git tree and resend.

Once you do that, the first line should say:
From: Nicolas Boichat <[email protected]>

Without this fix:

Also you dropped the Fixes line:

Fixes 8530b4e7b22bc3b ("ath10k: sdio: set skb len for all rx packets")
Quoted 58 lines
Quoted 58 lines

---
v2:no this patch
v2:new added

 drivers/net/wireless/ath/ath10k/sdio.c | 27 +++++++++++++++++++--------
 1 file changed, 19 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +19 -8
index 8ed4fbd..1127e44 100644
@@ -381,16 +381,11 @@ static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar,
        struct ath10k_htc_hdr *htc_hdr = (struct ath10k_htc_hdr *)skb->data;
        bool trailer_present = htc_hdr->flags & ATH10K_HTC_FLAG_TRAILER_PRESENT;
        enum ath10k_htc_ep_id eid;
-       u16 payload_len;
        u8 *trailer;
        int ret;
 
-       payload_len = le16_to_cpu(htc_hdr->len);
-       skb->len = payload_len + sizeof(struct ath10k_htc_hdr);
-
        if (trailer_present) {
-               trailer = skb->data + sizeof(*htc_hdr) +
-                         payload_len - htc_hdr->trailer_len;
+               trailer = skb->data + skb->len - htc_hdr->trailer_len;
 
                eid = pipe_id_to_eid(htc_hdr->eid);
 
@@ -632,13 +627,29 @@ static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
 {
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        struct sk_buff *skb = pkt->skb;
+       struct ath10k_htc_hdr *htc_hdr;
        int ret;
 
        ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
                                 skb->data, pkt->alloc_len);
+
+       if (!ret) {
+               /* Update actual length. The original length may be incorrect,
+                * as the FW will bundle multiple packets as long as their sizes
+                * fit within the same aligned length (pkt->alloc_len).
+                */
+               htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+               pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
+               if (pkt->act_len <= pkt->alloc_len) {
+                       skb_put(skb, pkt->act_len);
+               } else {
+                       ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
+                                   pkt->act_len, pkt->alloc_len);
+                       ret = -EMSGSIZE;
+               }
+       }
+
        pkt->status = ret;
-       if (!ret)
-               skb_put(skb, pkt->act_len);
 
Quoted 5 lines
Quoted 5 lines
drivers/net/wireless/ath/ath10k/sdio.c +0 -1
        return ret;
 }
--

1.9.1

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#4 lore raw

RE: [PATCH v3 1/8] ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

In reply to Wen Gong
Quoted 8 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 1/8] ath10k: adjust skb length in ath10k_sdio_mbox_rx_packet

Patch v4 sent, https://patchwork.kernel.org/patch/11126221/

Quoted 6 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#5 lore raw

PATCH v3 2/8 ath10k: enable RX bundle receive for sdio

In reply to Wen Gong

From: Alagu Sankar <[email protected]>

The existing implementation of initiating multiple sdio transfers for receive bundling is slowing down the receive speed. Combining the transfers using a bundle method would be ideal.

The transmission utilization ratio for sdio bus for small packet is slow, because the space and time cost for sdio bus is same for large length packet and small length packet. So the speed of data for large length packet is higher than small length.

Test result of different length of data:
data packet(byte) cost time(us) calculated rate(Mbps)

      256               28                73
      512               33               124
     1024               35               234
     1792               45               318
    14336              168               682
    28672              333               688
    57344              660               695

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2: fix incorrect skb tail of rx bundle in ath10k_sdio_mbox_rx_process_packet
v3: change some code style
split fix incorrect skb tail of rx bundle to patch "adjust skb length in ath10k_sdio_mbox_rx_packet"

 drivers/net/wireless/ath/ath10k/sdio.c | 106 +++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/sdio.h |   7 ++-
 2 files changed, 74 insertions(+), 39 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +69 -37
index 1127e44..23c998d 100644
@@ -24,6 +24,9 @@
 #include "trace.h"
 #include "sdio.h"
 
+#define ATH10K_SDIO_DMA_BUF_SIZE	(32 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE	(32 * 1024)
+
 /* inlined helper functions */
 
 static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
@@ -484,11 +487,11 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar,
-					     struct ath10k_sdio_rx_data *rx_pkts,
-					     struct ath10k_htc_hdr *htc_hdr,
-					     size_t full_len, size_t act_len,
-					     size_t *bndl_cnt)
+static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
+					 struct ath10k_sdio_rx_data *rx_pkts,
+					 struct ath10k_htc_hdr *htc_hdr,
+					 size_t full_len, size_t act_len,
+					 size_t *bndl_cnt)
 {
 	int ret, i;
 
@@ -529,6 +532,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	size_t full_len, act_len;
 	bool last_in_bundle;
 	int ret, i;
+	int pkt_cnt = 0;
 
 	if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
 		ath10k_warn(ar,
@@ -572,20 +576,22 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			 */
 			size_t bndl_cnt;
 
-			ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
-								&ar_sdio->rx_pkts[i],
-								htc_hdr,
-								full_len,
-								act_len,
-								&bndl_cnt);
+			struct ath10k_sdio_rx_data *rx_pkts =
+				&ar_sdio->rx_pkts[pkt_cnt];
+
+			ret = ath10k_sdio_mbox_alloc_bundle(ar,
+							    rx_pkts,
+							    htc_hdr,
+							    full_len,
+							    act_len,
+							    &bndl_cnt);
 
 			if (ret) {
 				ath10k_warn(ar, "alloc_bundle error %d\n", ret);
 				goto err;
 			}
 
-			n_lookaheads += bndl_cnt;
-			i += bndl_cnt;
+			pkt_cnt += bndl_cnt;
 			/*Next buffer will be the last in the bundle */
 			last_in_bundle = true;
 		}
@@ -597,7 +603,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 		if (htc_hdr->flags & ATH10K_HTC_FLAGS_RECV_1MORE_BLOCK)
 			full_len += ATH10K_HIF_MBOX_BLOCK_SIZE;
 
-		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i],
+		ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[pkt_cnt],
 						    act_len,
 						    full_len,
 						    last_in_bundle,
@@ -606,9 +612,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 			ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
 			goto err;
 		}
+		pkt_cnt++;
 	}
 
-	ar_sdio->n_rx_pkts = i;
+	ar_sdio->n_rx_pkts = pkt_cnt;
 
 	return 0;
 
@@ -622,10 +629,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
-				      struct ath10k_sdio_rx_data *pkt)
+static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt = &ar_sdio->rx_pkts[0];
 	struct sk_buff *skb = pkt->skb;
 	struct ath10k_htc_hdr *htc_hdr;
 	int ret;
@@ -633,46 +640,62 @@ static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
 	ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
 				 skb->data, pkt->alloc_len);
 
-	if (!ret) {
-		/* Update actual length. The original length may be incorrect,
-		 * as the FW will bundle multiple packets as long as their sizes
-		 * fit within the same aligned length (pkt->alloc_len).
-		 */
-		htc_hdr = (struct ath10k_htc_hdr *)skb->data;
-		pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
-		if (pkt->act_len <= pkt->alloc_len) {
-			skb_put(skb, pkt->act_len);
-		} else {
-			ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
-				    pkt->act_len, pkt->alloc_len);
-			ret = -EMSGSIZE;
-		}
+	if (ret) {
+		ar_sdio->n_rx_pkts = 0;
+		ath10k_sdio_mbox_free_rx_pkt(pkt);
+		return ret;
 	}
 
+	htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+	pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
 	pkt->status = ret;
+	skb_put(skb, pkt->act_len);
 
 	return ret;
 }
 
-static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
+static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
 {
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_data *pkt;
+	struct ath10k_htc_hdr *htc_hdr;
 	int ret, i;
+	u32 pkt_offset, virt_pkt_len;
 
+	virt_pkt_len = 0;
 	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
-		ret = ath10k_sdio_mbox_rx_packet(ar,
-						 &ar_sdio->rx_pkts[i]);
+		virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
+	}
+
+	if (virt_pkt_len < ATH10K_SDIO_DMA_BUF_SIZE) {
+		ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
+					 ar_sdio->vsg_buffer, virt_pkt_len);
 		if (ret)
 			goto err;
+	} else {
+		ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);
+	}
+
+	pkt_offset = 0;
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
+		pkt = &ar_sdio->rx_pkts[i];
+		htc_hdr = (struct ath10k_htc_hdr *)(ar_sdio->vsg_buffer + pkt_offset);
+		pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
+
+		skb_put_data(pkt->skb, htc_hdr, pkt->act_len);
+		pkt->status = 0;
+		pkt_offset += pkt->alloc_len;
 	}
 
 	return 0;
 
 err:
 	/* Free all packets that was not successfully fetched. */
-	for (; i < ar_sdio->n_rx_pkts; i++)
+	for (i = 0; i < ar_sdio->n_rx_pkts; i++)
 		ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
 
+	ar_sdio->n_rx_pkts = 0;
+
 	return ret;
 }
 
@@ -715,7 +738,10 @@ static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
 			 */
 			*done = false;
 
-		ret = ath10k_sdio_mbox_rx_fetch(ar);
+		if (ar_sdio->n_rx_pkts > 1)
+			ret = ath10k_sdio_mbox_rx_fetch_bundle(ar);
+		else
+			ret = ath10k_sdio_mbox_rx_fetch(ar);
 
 		/* Process fetched packets. This will potentially update
 		 * n_lookaheads depending on if the packets contain lookahead
@@ -1123,7 +1149,7 @@ static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
 					 MBOX_HOST_INT_STATUS_ADDRESS,
 					 &rx_word);
 		if (ret) {
-			ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
+			ath10k_warn(ar, "unable to read rx_lookahd: %d\n", ret);
 			return ret;
 		}
 
@@ -2018,6 +2044,12 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 		goto err_core_destroy;
 	}
 
+	ar_sdio->vsg_buffer = devm_kmalloc(ar->dev, ATH10K_SDIO_VSG_BUF_SIZE, GFP_KERNEL);
+	if (!ar_sdio->vsg_buffer) {
+		ret = -ENOMEM;
+		goto err_core_destroy;
+	}
+
 	ar_sdio->irq_data.irq_en_reg =
 		devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_enable_regs),
 			     GFP_KERNEL);
drivers/net/wireless/ath/ath10k/sdio.h +5 -2
index b8c7ac0..4896eca 100644
@@ -138,8 +138,8 @@ struct ath10k_sdio_irq_proc_regs {
 	u8 rx_lookahead_valid;
 	u8 host_int_status2;
 	u8 gmbox_rx_avail;
-	__le32 rx_lookahead[2];
-	__le32 rx_gmbox_lookahead_alias[2];
+	__le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
+	__le32 int_status_enable;
 };
 
 struct ath10k_sdio_irq_enable_regs {
@@ -196,6 +196,9 @@ struct ath10k_sdio {
 	struct ath10k *ar;
 	struct ath10k_sdio_irq_data irq_data;
 
+	/* temporary buffer for sdio read */
+	u8 *vsg_buffer;
+
 	/* temporary buffer for BMI requests */
 	u8 *bmi_buf;
 
Signature · 1 line
1.9.1
#6 lore raw

Re: [PATCH v3 2/8] ath10k: enable RX bundle receive for sdio

Quoted 185 lines · Wen Gong

From: Alagu Sankar <[email protected]>

The existing implementation of initiating multiple sdio transfers for receive bundling is slowing down the receive speed. Combining the transfers using a bundle method would be ideal.

The transmission utilization ratio for sdio bus for small packet is slow, because the space and time cost for sdio bus is same for large length packet and small length packet. So the speed of data for large length packet is higher than small length.

Test result of different length of data:
data packet(byte) cost time(us) calculated rate(Mbps)

      256               28                73
      512               33               124
     1024               35               234
     1792               45               318
    14336              168               682
    28672              333               688
    57344              660               695

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2: fix incorrect skb tail of rx bundle in ath10k_sdio_mbox_rx_process_packet
v3: change some code style
split fix incorrect skb tail of rx bundle to patch "adjust skb length in ath10k_sdio_mbox_rx_packet"

 drivers/net/wireless/ath/ath10k/sdio.c | 106 +++++++++++++++++++++------------
 drivers/net/wireless/ath/ath10k/sdio.h |   7 ++-
 2 files changed, 74 insertions(+), 39 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +36 -34
index 1127e44..23c998d 100644
@@ -24,6 +24,9 @@
 #include "trace.h"
 #include "sdio.h"
 
+#define ATH10K_SDIO_DMA_BUF_SIZE       (32 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE       (32 * 1024)
+
 /* inlined helper functions */
 
 static inline int ath10k_sdio_calc_txrx_padded_len(struct ath10k_sdio *ar_sdio,
@@ -484,11 +487,11 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
        return ret;
 }
 
-static int ath10k_sdio_mbox_alloc_pkt_bundle(struct ath10k *ar,
-                                            struct ath10k_sdio_rx_data *rx_pkts,
-                                            struct ath10k_htc_hdr *htc_hdr,
-                                            size_t full_len, size_t act_len,
-                                            size_t *bndl_cnt)
+static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
+                                        struct ath10k_sdio_rx_data *rx_pkts,
+                                        struct ath10k_htc_hdr *htc_hdr,
+                                        size_t full_len, size_t act_len,
+                                        size_t *bndl_cnt)
 {
        int ret, i;
 
@@ -529,6 +532,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
        size_t full_len, act_len;
        bool last_in_bundle;
        int ret, i;
+       int pkt_cnt = 0;
 
        if (n_lookaheads > ATH10K_SDIO_MAX_RX_MSGS) {
                ath10k_warn(ar,
@@ -572,20 +576,22 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
                         */
                        size_t bndl_cnt;
 
-                       ret = ath10k_sdio_mbox_alloc_pkt_bundle(ar,
-                                                               &ar_sdio->rx_pkts[i],
-                                                               htc_hdr,
-                                                               full_len,
-                                                               act_len,
-                                                               &bndl_cnt);
+                       struct ath10k_sdio_rx_data *rx_pkts =
+                               &ar_sdio->rx_pkts[pkt_cnt];
+
+                       ret = ath10k_sdio_mbox_alloc_bundle(ar,
+                                                           rx_pkts,
+                                                           htc_hdr,
+                                                           full_len,
+                                                           act_len,
+                                                           &bndl_cnt);
 
                        if (ret) {
                                ath10k_warn(ar, "alloc_bundle error %d\n", ret);
                                goto err;
                        }
 
-                       n_lookaheads += bndl_cnt;
-                       i += bndl_cnt;
+                       pkt_cnt += bndl_cnt;
                        /*Next buffer will be the last in the bundle */
                        last_in_bundle = true;
                }
@@ -597,7 +603,7 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
                if (htc_hdr->flags & ATH10K_HTC_FLAGS_RECV_1MORE_BLOCK)
                        full_len += ATH10K_HIF_MBOX_BLOCK_SIZE;
 
-               ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[i],
+               ret = ath10k_sdio_mbox_alloc_rx_pkt(&ar_sdio->rx_pkts[pkt_cnt],
                                                    act_len,
                                                    full_len,
                                                    last_in_bundle,
@@ -606,9 +612,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
                        ath10k_warn(ar, "alloc_rx_pkt error %d\n", ret);
                        goto err;
                }
+               pkt_cnt++;
        }
 
-       ar_sdio->n_rx_pkts = i;
+       ar_sdio->n_rx_pkts = pkt_cnt;
 
        return 0;
 
@@ -622,10 +629,10 @@ static int ath10k_sdio_mbox_rx_alloc(struct ath10k *ar,
        return ret;
 }
 
-static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
-                                     struct ath10k_sdio_rx_data *pkt)
+static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
 {
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+       struct ath10k_sdio_rx_data *pkt = &ar_sdio->rx_pkts[0];
        struct sk_buff *skb = pkt->skb;
        struct ath10k_htc_hdr *htc_hdr;
        int ret;
@@ -633,46 +640,62 @@ static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar,
        ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
                                 skb->data, pkt->alloc_len);
 
-       if (!ret) {
-               /* Update actual length. The original length may be incorrect,
-                * as the FW will bundle multiple packets as long as their sizes
-                * fit within the same aligned length (pkt->alloc_len).
-                */
-               htc_hdr = (struct ath10k_htc_hdr *)skb->data;
-               pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
-               if (pkt->act_len <= pkt->alloc_len) {
-                       skb_put(skb, pkt->act_len);
-               } else {
-                       ath10k_warn(ar, "rx packet too large (%zu > %zu)\n",
-                                   pkt->act_len, pkt->alloc_len);
-                       ret = -EMSGSIZE;
-               }
+       if (ret) {
+               ar_sdio->n_rx_pkts = 0;
+               ath10k_sdio_mbox_free_rx_pkt(pkt);
+               return ret;
        }
 
+       htc_hdr = (struct ath10k_htc_hdr *)skb->data;
+       pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);
        pkt->status = ret;
+       skb_put(skb, pkt->act_len);
 
        return ret;
 }
 
-static int ath10k_sdio_mbox_rx_fetch(struct ath10k *ar)
+static int ath10k_sdio_mbox_rx_fetch_bundle(struct ath10k *ar)
 {
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+       struct ath10k_sdio_rx_data *pkt;
+       struct ath10k_htc_hdr *htc_hdr;
        int ret, i;
+       u32 pkt_offset, virt_pkt_len;
 
+       virt_pkt_len = 0;
        for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
-               ret = ath10k_sdio_mbox_rx_packet(ar,
-                                                &ar_sdio->rx_pkts[i]);

drivers/net/wireless/ath/ath10k/sdio.c static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar, · line 676

Quoted 10 lines
drivers/net/wireless/ath/ath10k/sdio.c +8 -0
+               virt_pkt_len += ar_sdio->rx_pkts[i].alloc_len;
+       }
+
+       if (virt_pkt_len < ATH10K_SDIO_DMA_BUF_SIZE) {
+               ret = ath10k_sdio_readsb(ar, ar_sdio->mbox_info.htc_addr,
+                                        ar_sdio->vsg_buffer, virt_pkt_len);
                if (ret)
                        goto err;
+       } else {
+               ath10k_err(ar, "size exceeding limit %d\n", virt_pkt_len);

Should you set err and goto err here? It seems like you're going to process garbage if this happens.

Quoted 7 lines
drivers/net/wireless/ath/ath10k/sdio.c +7 -0
+       }
+
+       pkt_offset = 0;
+       for (i = 0; i < ar_sdio->n_rx_pkts; i++) {
+               pkt = &ar_sdio->rx_pkts[i];
+               htc_hdr = (struct ath10k_htc_hdr *)(ar_sdio->vsg_buffer + pkt_offset);
+               pkt->act_len = le16_to_cpu(htc_hdr->len) + sizeof(*htc_hdr);

drivers/net/wireless/ath/ath10k/sdio.c static int ath10k_sdio_mbox_rx_packet(struct ath10k *ar, · line 693

Quoted 10 lines
drivers/net/wireless/ath/ath10k/sdio.c +4 -0
+
+               skb_put_data(pkt->skb, htc_hdr, pkt->act_len);
+               pkt->status = 0;
+               pkt_offset += pkt->alloc_len;
        }
 
        return 0;
 
 err:
        /* Free all packets that was not successfully fetched. */

Well you're freeing everything, now.

Quoted 71 lines
drivers/net/wireless/ath/ath10k/sdio.c +14 -3
-       for (; i < ar_sdio->n_rx_pkts; i++)
+       for (i = 0; i < ar_sdio->n_rx_pkts; i++)
                ath10k_sdio_mbox_free_rx_pkt(&ar_sdio->rx_pkts[i]);
 
+       ar_sdio->n_rx_pkts = 0;
+
        return ret;
 }
 
@@ -715,7 +738,10 @@ static int ath10k_sdio_mbox_rxmsg_pending_handler(struct ath10k *ar,
                         */
                        *done = false;
 
-               ret = ath10k_sdio_mbox_rx_fetch(ar);
+               if (ar_sdio->n_rx_pkts > 1)
+                       ret = ath10k_sdio_mbox_rx_fetch_bundle(ar);
+               else
+                       ret = ath10k_sdio_mbox_rx_fetch(ar);
 
                /* Process fetched packets. This will potentially update
                 * n_lookaheads depending on if the packets contain lookahead
@@ -1123,7 +1149,7 @@ static int ath10k_sdio_bmi_get_rx_lookahead(struct ath10k *ar)
                                         MBOX_HOST_INT_STATUS_ADDRESS,
                                         &rx_word);
                if (ret) {
-                       ath10k_warn(ar, "unable to read RX_LOOKAHEAD_VALID: %d\n", ret);
+                       ath10k_warn(ar, "unable to read rx_lookahd: %d\n", ret);
                        return ret;
                }
 
@@ -2018,6 +2044,12 @@ static int ath10k_sdio_probe(struct sdio_func *func,
                goto err_core_destroy;
        }
 
+       ar_sdio->vsg_buffer = devm_kmalloc(ar->dev, ATH10K_SDIO_VSG_BUF_SIZE, GFP_KERNEL);
+       if (!ar_sdio->vsg_buffer) {
+               ret = -ENOMEM;
+               goto err_core_destroy;
+       }
+
        ar_sdio->irq_data.irq_en_reg =
                devm_kzalloc(ar->dev, sizeof(struct ath10k_sdio_irq_enable_regs),
                             GFP_KERNEL);
drivers/net/wireless/ath/ath10k/sdio.h +5 -3
index b8c7ac0..4896eca 100644
@@ -138,8 +138,8 @@ struct ath10k_sdio_irq_proc_regs {
        u8 rx_lookahead_valid;
        u8 host_int_status2;
        u8 gmbox_rx_avail;
-       __le32 rx_lookahead[2];
-       __le32 rx_gmbox_lookahead_alias[2];
+       __le32 rx_lookahead[2 * ATH10K_HIF_MBOX_NUM_MAX];
+       __le32 int_status_enable;
 };
 
 struct ath10k_sdio_irq_enable_regs {
@@ -196,6 +196,9 @@ struct ath10k_sdio {
        struct ath10k *ar;
        struct ath10k_sdio_irq_data irq_data;
 
+       /* temporary buffer for sdio read */
+       u8 *vsg_buffer;
+
        /* temporary buffer for BMI requests */
        u8 *bmi_buf;
 
--

1.9.1

#7 lore raw

RE: [PATCH v3 2/8] ath10k: enable RX bundle receive for sdio

In reply to Wen Gong
Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 2/8] ath10k: enable RX bundle receive for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126223/

Quoted 7 lines

1.9.1

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#8 lore raw

RE: [PATCH v3 2/8] ath10k: enable RX bundle receive for sdio

In reply to Wen Gong
Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 2/8] ath10k: enable RX bundle receive for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126223/

Quoted 6 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#9 lore raw

PATCH v3 3/8 ath10k: change max RX bundle size from 8 to 32 for sdio

In reply to Wen Gong

The max bundle size support by firmware is 32, change it from 8 to 32 will help performance. This results in significant performance improvement on RX path.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:change macro HTC_GET_BUNDLE_COUNT
v3:change some code style

 drivers/net/wireless/ath/ath10k/htc.h  | 8 +++++++-
 drivers/net/wireless/ath/ath10k/sdio.c | 6 +++---
 drivers/net/wireless/ath/ath10k/sdio.h | 4 ++--
 3 files changed, 12 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath10k/htc.h +7 -1
index f55d3ca..ffda8bf 100644
@@ -39,7 +39,7 @@
  * 4-byte aligned.
  */
 
-#define HTC_HOST_MAX_MSG_PER_RX_BUNDLE        8
+#define HTC_HOST_MAX_MSG_PER_RX_BUNDLE        32
 
 enum ath10k_htc_tx_flags {
 	ATH10K_HTC_FLAG_NEED_CREDIT_UPDATE = 0x01,
@@ -52,6 +52,12 @@ enum ath10k_htc_rx_flags {
 	ATH10K_HTC_FLAG_BUNDLE_MASK     = 0xF0
 };
 
+#define BUNDLE_EXTRA_MASK GENMASK(3, 2)
+
+#define HTC_GET_BUNDLE_COUNT(flags) \
+	    (FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, (flags)) +  \
+	    (FIELD_GET(BUNDLE_EXTRA_MASK, (flags)) << 4))
+
 struct ath10k_htc_hdr {
 	u8 eid; /* @enum ath10k_htc_ep_id */
 	u8 flags; /* @enum ath10k_htc_tx_flags, ath10k_htc_rx_flags */
drivers/net/wireless/ath/ath10k/sdio.c +3 -3
index 23c998d..bd808e5 100644
@@ -24,8 +24,8 @@
 #include "trace.h"
 #include "sdio.h"
 
-#define ATH10K_SDIO_DMA_BUF_SIZE	(32 * 1024)
-#define ATH10K_SDIO_VSG_BUF_SIZE	(32 * 1024)
+#define ATH10K_SDIO_DMA_BUF_SIZE	(64 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE	(64 * 1024)
 
 /* inlined helper functions */
 
@@ -495,7 +495,7 @@ static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
 {
 	int ret, i;
 
-	*bndl_cnt = FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, htc_hdr->flags);
+	*bndl_cnt = HTC_GET_BUNDLE_COUNT(htc_hdr->flags);
 
 	if (*bndl_cnt > HTC_HOST_MAX_MSG_PER_RX_BUNDLE) {
 		ath10k_warn(ar,
drivers/net/wireless/ath/ath10k/sdio.h +2 -2
index 4896eca..3ca76c7 100644
@@ -89,10 +89,10 @@
  * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
  *
  * in this case the driver must allocate
- * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's.
+ * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
  */
 #define ATH10K_SDIO_MAX_RX_MSGS \
-	(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE)
+	(HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)
 
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL   0x00000868u
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
Signature · 1 line
1.9.1
#10 lore raw

Re: [PATCH v3 3/8] ath10k: change max RX bundle size from 8 to 32 for sdio

Quoted 31 lines · Wen Gong

The max bundle size support by firmware is 32, change it from 8 to 32 will help performance. This results in significant performance improvement on RX path.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:change macro HTC_GET_BUNDLE_COUNT
v3:change some code style

 drivers/net/wireless/ath/ath10k/htc.h  | 8 +++++++-
 drivers/net/wireless/ath/ath10k/sdio.c | 6 +++---
 drivers/net/wireless/ath/ath10k/sdio.h | 4 ++--
 3 files changed, 12 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath10k/htc.h +1 -1
index f55d3ca..ffda8bf 100644
@@ -39,7 +39,7 @@
  * 4-byte aligned.
  */
 
-#define HTC_HOST_MAX_MSG_PER_RX_BUNDLE        8
+#define HTC_HOST_MAX_MSG_PER_RX_BUNDLE        32
 
 enum ath10k_htc_tx_flags {
        ATH10K_HTC_FLAG_NEED_CREDIT_UPDATE = 0x01,

drivers/net/wireless/ath/ath10k/htc.h enum ath10k_htc_rx_flags { · line 55

Quoted 4 lines
drivers/net/wireless/ath/ath10k/htc.h +1 -0
@@ -52,6 +52,12 @@ enum ath10k_htc_rx_flags {
        ATH10K_HTC_FLAG_BUNDLE_MASK     = 0xF0
 };
 
+#define BUNDLE_EXTRA_MASK GENMASK(3, 2)

Well, ATH10K_HTC_FLAG_BUNDLE_MASK is defined in a struct, set to a hex value. This is a macro, set to a GENMASK() value.

I don't care how you do it, but please be consistent.

In this case, please add ATH10K_HTC_FLAG_BUNDLE_EXTRA_MASK GENMASK = 0x0A in the enum above (sorry, I say structure in my previous comment).

Quoted 52 lines
drivers/net/wireless/ath/ath10k/htc.h +5 -0
+
+#define HTC_GET_BUNDLE_COUNT(flags) \
+           (FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, (flags)) +  \
+           (FIELD_GET(BUNDLE_EXTRA_MASK, (flags)) << 4))
+
 struct ath10k_htc_hdr {
        u8 eid; /* @enum ath10k_htc_ep_id */
        u8 flags; /* @enum ath10k_htc_tx_flags, ath10k_htc_rx_flags */
drivers/net/wireless/ath/ath10k/sdio.c +3 -3
index 23c998d..bd808e5 100644
@@ -24,8 +24,8 @@
 #include "trace.h"
 #include "sdio.h"
 
-#define ATH10K_SDIO_DMA_BUF_SIZE       (32 * 1024)
-#define ATH10K_SDIO_VSG_BUF_SIZE       (32 * 1024)
+#define ATH10K_SDIO_DMA_BUF_SIZE       (64 * 1024)
+#define ATH10K_SDIO_VSG_BUF_SIZE       (64 * 1024)
 
 /* inlined helper functions */
 
@@ -495,7 +495,7 @@ static int ath10k_sdio_mbox_alloc_bundle(struct ath10k *ar,
 {
        int ret, i;
 
-       *bndl_cnt = FIELD_GET(ATH10K_HTC_FLAG_BUNDLE_MASK, htc_hdr->flags);
+       *bndl_cnt = HTC_GET_BUNDLE_COUNT(htc_hdr->flags);
 
        if (*bndl_cnt > HTC_HOST_MAX_MSG_PER_RX_BUNDLE) {
                ath10k_warn(ar,
drivers/net/wireless/ath/ath10k/sdio.h +2 -3
index 4896eca..3ca76c7 100644
@@ -89,10 +89,10 @@
  * to the maximum value (HTC_HOST_MAX_MSG_PER_RX_BUNDLE).
  *
  * in this case the driver must allocate
- * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE) skb's.
+ * (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2) skb's.
  */
 #define ATH10K_SDIO_MAX_RX_MSGS \
-       (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * HTC_HOST_MAX_MSG_PER_RX_BUNDLE)
+       (HTC_HOST_MAX_MSG_PER_RX_BUNDLE * 2)
 
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL   0x00000868u
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
--

1.9.1

#11 lore raw

RE: [PATCH v3 3/8] ath10k: change max RX bundle size from 8 to 32 for sdio

Quoted 9 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Nicolas Boichat
Sent: Friday, August 30, 2019 11:11 AM
To: Wen Gong <[email protected]>
Cc: open list:NETWORKING DRIVERS (WIRELESS) <linux- [email protected]>; [email protected]
Subject: [EXT] Re: [PATCH v3 3/8] ath10k: change max RX bundle size from 8 to 32 for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126225/

Quoted 6 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#12 lore raw

PATCH v3 4/8 ath10k: add workqueue for RX path of sdio

In reply to Wen Gong

The thread of read rx message by sdio bus from firmware is synchronous, it will cost much time for process the left part of rx message which includes indicate the rx packet to uppper net stack. It will reduce the time of read from sdio.

This patch move the indication to a workqueue, it results in significant performance improvement on RX path.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/sdio.c | 116 ++++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/sdio.h |  20 ++++++
 2 files changed, 133 insertions(+), 3 deletions(-)
drivers/net/wireless/ath/ath10k/sdio.c +113 -3
index bd808e5..609bc0f 100644
@@ -412,6 +412,66 @@ static int ath10k_sdio_mbox_rx_process_packet(struct ath10k *ar,
 	return 0;
 }
 
+static struct ath10k_sdio_rx_request *ath10k_sdio_alloc_rx_req(struct ath10k *ar)
+{
+	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_request *rx_req;
+
+	spin_lock_bh(&ar_sdio->rx_lock);
+
+	if (list_empty(&ar_sdio->rx_req_freeq)) {
+		rx_req = NULL;
+		ath10k_dbg(ar, ATH10K_DBG_SDIO, "rx_req alloc fail\n");
+		goto out;
+	}
+
+	rx_req = list_first_entry(&ar_sdio->rx_req_freeq,
+				  struct ath10k_sdio_rx_request, list);
+	list_del(&rx_req->list);
+
+out:
+	spin_unlock_bh(&ar_sdio->rx_lock);
+	return rx_req;
+}
+
+static void ath10k_sdio_free_rx_req(struct ath10k *ar,
+				    struct ath10k_sdio_rx_request *rx_req)
+{
+	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+
+	memset(rx_req, 0, sizeof(*rx_req));
+
+	spin_lock_bh(&ar_sdio->rx_lock);
+	list_add_tail(&rx_req->list, &ar_sdio->rx_req_freeq);
+	spin_unlock_bh(&ar_sdio->rx_lock);
+}
+
+static int ath10k_sdio_prep_async_rx_req(struct ath10k *ar,
+					 struct sk_buff *skb,
+					 struct ath10k_htc_ep *ep)
+{
+	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
+	struct ath10k_sdio_rx_request *rx_req;
+
+	/* Allocate a rx request for the message and queue it on the
+	 * SDIO rx workqueue.
+	 */
+	rx_req = ath10k_sdio_alloc_rx_req(ar);
+	if (!rx_req) {
+		ath10k_warn(ar, "unable to allocate rx request for async request\n");
+		return -ENOMEM;
+	}
+
+	rx_req->skb = skb;
+	rx_req->ep = ep;
+
+	spin_lock_bh(&ar_sdio->wr_async_lock_rx);
+	list_add_tail(&rx_req->list, &ar_sdio->wr_asyncq_rx);
+	spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
+
+	return 0;
+}
+
 static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 					       u32 lookaheads[],
 					       int *n_lookahead)
@@ -465,10 +525,16 @@ static int ath10k_sdio_mbox_rx_process_packets(struct ath10k *ar,
 		if (ret)
 			goto out;
 
-		if (!pkt->trailer_only)
-			ep->ep_ops.ep_rx_complete(ar_sdio->ar, pkt->skb);
-		else
+		if (!pkt->trailer_only) {
+			ret = ath10k_sdio_prep_async_rx_req(ar, pkt->skb, ep);
+			if (ret)
+				kfree_skb(pkt->skb);
+			else
+				queue_work(ar->workqueue_aux,
+					   &ar_sdio->wr_async_work_rx);
+		} else {
 			kfree_skb(pkt->skb);
+		}
 
 		/* The RX complete handler now owns the skb...*/
 		pkt->skb = NULL;
@@ -1317,6 +1383,26 @@ static void __ath10k_sdio_write_async(struct ath10k *ar,
 	ath10k_sdio_free_bus_req(ar, req);
 }
 
+static void ath10k_rx_indication_async_work(struct work_struct *work)
+{
+	struct ath10k_sdio *ar_sdio = container_of(work, struct ath10k_sdio,
+						   wr_async_work_rx);
+	struct ath10k *ar = ar_sdio->ar;
+	struct ath10k_sdio_rx_request *req, *tmp_req;
+
+	spin_lock_bh(&ar_sdio->wr_async_lock_rx);
+
+	list_for_each_entry_safe(req, tmp_req, &ar_sdio->wr_asyncq_rx, list) {
+		list_del(&req->list);
+		spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
+		req->ep->ep_ops.ep_rx_complete(ar, req->skb);
+		ath10k_sdio_free_rx_req(ar, req);
+		spin_lock_bh(&ar_sdio->wr_async_lock_rx);
+	}
+
+	spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
+}
+
 static void ath10k_sdio_write_async_work(struct work_struct *work)
 {
 	struct ath10k_sdio *ar_sdio = container_of(work, struct ath10k_sdio,
@@ -1805,10 +1891,24 @@ static void ath10k_sdio_irq_disable(struct ath10k *ar)
 static void ath10k_sdio_hif_stop(struct ath10k *ar)
 {
 	struct ath10k_sdio_bus_request *req, *tmp_req;
+	struct ath10k_sdio_rx_request *rx_req, *tmp_rx_req;
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
 
 	ath10k_sdio_irq_disable(ar);
 
+	cancel_work_sync(&ar_sdio->wr_async_work_rx);
+
+	spin_lock_bh(&ar_sdio->wr_async_lock_rx);
+
+	/* Free all RX requests that have not been handled */
+	list_for_each_entry_safe(rx_req, tmp_rx_req, &ar_sdio->wr_asyncq_rx, list) {
+		list_del(&rx_req->list);
+		rx_req->ep->ep_ops.ep_rx_complete(ar, rx_req->skb);
+		ath10k_sdio_free_rx_req(ar, rx_req);
+	}
+
+	spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
+
 	cancel_work_sync(&ar_sdio->wr_async_work);
 
 	spin_lock_bh(&ar_sdio->wr_async_lock);
@@ -2087,6 +2187,16 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 	for (i = 0; i < ATH10K_SDIO_BUS_REQUEST_MAX_NUM; i++)
 		ath10k_sdio_free_bus_req(ar, &ar_sdio->bus_req[i]);
 
+	spin_lock_init(&ar_sdio->rx_lock);
+	spin_lock_init(&ar_sdio->wr_async_lock_rx);
+	INIT_LIST_HEAD(&ar_sdio->rx_req_freeq);
+	INIT_LIST_HEAD(&ar_sdio->wr_asyncq_rx);
+
+	INIT_WORK(&ar_sdio->wr_async_work_rx, ath10k_rx_indication_async_work);
+
+	for (i = 0; i < ARRAY_SIZE(ar_sdio->rx_req); i++)
+		ath10k_sdio_free_rx_req(ar, &ar_sdio->rx_req[i]);
+
 	dev_id_base = FIELD_GET(QCA_MANUFACTURER_ID_BASE, id->device);
 	switch (dev_id_base) {
 	case QCA_MANUFACTURER_ID_AR6005_BASE:
drivers/net/wireless/ath/ath10k/sdio.h +20 -0
index 3ca76c7..9bb438e 100644
@@ -38,6 +38,7 @@
 
 #define ATH10K_HIF_MBOX_NUM_MAX                 4
 #define ATH10K_SDIO_BUS_REQUEST_MAX_NUM         64
+#define ATH10K_SDIO_RX_REQUEST_MAX_NUM          1024
 
 #define ATH10K_SDIO_HIF_COMMUNICATION_TIMEOUT_HZ (100 * HZ)
 
@@ -98,6 +99,12 @@
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_OFF 0xFFFEFFFF
 #define ATH10K_FIFO_TIMEOUT_AND_CHIP_CONTROL_DISABLE_SLEEP_ON 0x10000
 
+struct ath10k_sdio_rx_request {
+	struct list_head list;
+	struct sk_buff *skb;
+	struct ath10k_htc_ep *ep;
+};
+
 struct ath10k_sdio_bus_request {
 	struct list_head list;
 
@@ -187,9 +194,17 @@ struct ath10k_sdio {
 	struct ath10k_sdio_bus_request bus_req[ATH10K_SDIO_BUS_REQUEST_MAX_NUM];
 	/* free list of bus requests */
 	struct list_head bus_req_freeq;
+
 	/* protects access to bus_req_freeq */
 	spinlock_t lock;
 
+	/* available rx requests */
+	struct ath10k_sdio_rx_request rx_req[ATH10K_SDIO_RX_REQUEST_MAX_NUM];
+	/* free list of rx requests */
+	struct list_head rx_req_freeq;
+	/* protects access to rx_req_freeq */
+	spinlock_t rx_lock;
+
 	struct ath10k_sdio_rx_data rx_pkts[ATH10K_SDIO_MAX_RX_MSGS];
 	size_t n_rx_pkts;
 
@@ -209,6 +224,11 @@ struct ath10k_sdio {
 	struct list_head wr_asyncq;
 	/* protects access to wr_asyncq */
 	spinlock_t wr_async_lock;
+
+	struct work_struct wr_async_work_rx;
+	struct list_head wr_asyncq_rx;
+	/* protects access to wr_asyncq_rx */
+	spinlock_t wr_async_lock_rx;
 };
 
 static inline struct ath10k_sdio *ath10k_sdio_priv(struct ath10k *ar)
Signature · 7 lines
1.9.1


_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k
#13 lore raw

RE: [PATCH v3 4/8] ath10k: add workqueue for RX path of sdio

Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 4/8] ath10k: add workqueue for RX path of sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126229/

Quoted 4 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#14 lore raw

PATCH v3 5/8 ath10k: disable TX complete indication of htt for sdio

In reply to Wen Gong

Tx complete message from firmware cost bus bandwidth of sdio, and bus bandwidth is the bollteneck of throughput, it will effect the bandwidth occupancy of data packet of TX and RX.

This patch disable TX complete indication from firmware for htt data packet, it results in significant performance improvement on TX path.

The downside of this patch is ath10k will not know the TX status of the data packet for poor signal situation. Although upper network stack or application layer have retry mechanism, the retry will be later than ath10k get the TX fail status if not disable TX complete.

This patch only effect sdio chip, it will not effect PCI, SNOC etc.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:change some code style
v3:change some code style

 drivers/net/wireless/ath/ath10k/core.c   |  9 ++++++++-
 drivers/net/wireless/ath/ath10k/hif.h    |  9 +++++++++
 drivers/net/wireless/ath/ath10k/htc.c    | 10 ++++++++++
 drivers/net/wireless/ath/ath10k/htc.h    |  3 +++
 drivers/net/wireless/ath/ath10k/htt.c    |  5 +++++
 drivers/net/wireless/ath/ath10k/htt.h    | 13 +++++++++++-
 drivers/net/wireless/ath/ath10k/htt_rx.c | 34 +++++++++++++++++++++++++++++++-
 drivers/net/wireless/ath/ath10k/htt_tx.c | 31 +++++++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h     |  2 +-
 drivers/net/wireless/ath/ath10k/sdio.c   | 23 +++++++++++++++++++++
 10 files changed, 135 insertions(+), 4 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +8 -1
index dc45d16..d56dcbd 100644
@@ -30,6 +30,7 @@
 
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
+static bool disable_tx_comp = true;
 static bool skip_otp;
 static bool rawmode;
 static bool fw_diag_log;
@@ -41,6 +42,9 @@
 module_param_named(debug_mask, ath10k_debug_mask, uint, 0644);
 module_param_named(cryptmode, ath10k_cryptmode_param, uint, 0644);
 module_param(uart_print, bool, 0644);
+
+/* If upper layer need the TX complete status, it can enable tx complete */
+module_param(disable_tx_comp, bool, 0644);
 module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
@@ -688,7 +692,10 @@ static void ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	/* Data transfer is not initiated, when reduced Tx completion
 	 * is used for SDIO. disable it until fixed
 	 */
-	param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
+	if (disable_tx_comp)
+		param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
+	else
+		param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
 
 	/* Alternate credit size of 1544 as used by SDIO firmware is
 	 * not big enough for mac80211 / native wifi frames. disable it
drivers/net/wireless/ath/ath10k/hif.h +9 -0
index 496ee34..0dd8973 100644
@@ -56,6 +56,8 @@ struct ath10k_hif_ops {
 
 	int (*swap_mailbox)(struct ath10k *ar);
 
+	int (*get_htt_tx_complete)(struct ath10k *ar);
+
 	int (*map_service_to_pipe)(struct ath10k *ar, u16 service_id,
 				   u8 *ul_pipe, u8 *dl_pipe);
 
@@ -144,6 +146,13 @@ static inline int ath10k_hif_swap_mailbox(struct ath10k *ar)
 	return 0;
 }
 
+static inline int ath10k_hif_get_htt_tx_complete(struct ath10k *ar)
+{
+	if (ar->hif.ops->get_htt_tx_complete)
+		return ar->hif.ops->get_htt_tx_complete(ar);
+	return 0;
+}
+
 static inline int ath10k_hif_map_service_to_pipe(struct ath10k *ar,
 						 u16 service_id,
 						 u8 *ul_pipe, u8 *dl_pipe)
drivers/net/wireless/ath/ath10k/htc.c +10 -0
index 1d4d1a1..4c6cdc2 100644
@@ -660,6 +660,16 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	return 0;
 }
 
+void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc,
+				      enum ath10k_htc_ep_id eid,
+				      bool enable)
+{
+	struct ath10k *ar = htc->ar;
+	struct ath10k_htc_ep *ep = &ar->htc.endpoint[eid];
+
+	ep->tx_credit_flow_enabled = enable;
+}
+
 int ath10k_htc_connect_service(struct ath10k_htc *htc,
 			       struct ath10k_htc_svc_conn_req *conn_req,
 			       struct ath10k_htc_svc_conn_resp *conn_resp)
drivers/net/wireless/ath/ath10k/htc.h +3 -0
index ffda8bf..0c93d19e 100644
@@ -373,6 +373,9 @@ struct ath10k_htc {
 int ath10k_htc_connect_service(struct ath10k_htc *htc,
 			       struct ath10k_htc_svc_conn_req  *conn_req,
 			       struct ath10k_htc_svc_conn_resp *conn_resp);
+void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc,
+				      enum ath10k_htc_ep_id eid,
+				      bool enable);
 int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid,
 		    struct sk_buff *packet);
 struct sk_buff *ath10k_htc_alloc_skb(struct ath10k *ar, int size);
drivers/net/wireless/ath/ath10k/htt.c +5 -0
index 7b75200..4354bf2 100644
@@ -10,6 +10,7 @@
 #include "htt.h"
 #include "core.h"
 #include "debug.h"
+#include "hif.h"
 
 static const enum htt_t2h_msg_type htt_main_t2h_msg_types[] = {
 	[HTT_MAIN_T2H_MSG_TYPE_VERSION_CONF] = HTT_T2H_MSG_TYPE_VERSION_CONF,
@@ -153,6 +154,10 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
 	htt->eid = conn_resp.eid;
 
+	htt->disable_tx_comp = ath10k_hif_get_htt_tx_complete(htt->ar);
+	if (htt->disable_tx_comp)
+		ath10k_htc_change_tx_credit_flow(&htt->ar->htc, htt->eid, true);
+
 	return 0;
 }
 
drivers/net/wireless/ath/ath10k/htt.h +12 -1
index 30c0800..889bf9f 100644
@@ -150,9 +150,19 @@ enum htt_data_tx_desc_flags1 {
 	HTT_DATA_TX_DESC_FLAGS1_MORE_IN_BATCH    = 1 << 12,
 	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD = 1 << 13,
 	HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD = 1 << 14,
-	HTT_DATA_TX_DESC_FLAGS1_RSVD1            = 1 << 15
+	HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE      = 1 << 15
 };
 
+#define HTT_TX_CREDIT_DELTA_ABS_M      0xffff0000
+#define HTT_TX_CREDIT_DELTA_ABS_S      16
+#define HTT_TX_CREDIT_DELTA_ABS_GET(word) \
+	    (((word) & HTT_TX_CREDIT_DELTA_ABS_M) >> HTT_TX_CREDIT_DELTA_ABS_S)
+
+#define HTT_TX_CREDIT_SIGN_BIT_M       0x00000100
+#define HTT_TX_CREDIT_SIGN_BIT_S       8
+#define HTT_TX_CREDIT_SIGN_BIT_GET(word) \
+	    (((word) & HTT_TX_CREDIT_SIGN_BIT_M) >> HTT_TX_CREDIT_SIGN_BIT_S)
+
 enum htt_data_tx_ext_tid {
 	HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST = 16,
 	HTT_DATA_TX_EXT_TID_MGMT                = 17,
@@ -2019,6 +2029,7 @@ struct ath10k_htt {
 	bool tx_mem_allocated;
 	const struct ath10k_htt_tx_ops *tx_ops;
 	const struct ath10k_htt_rx_ops *rx_ops;
+	bool disable_tx_comp;
 };
 
 struct ath10k_htt_tx_ops {
drivers/net/wireless/ath/ath10k/htt_rx.c +33 -1
index 83a7fb6..5bf3179 100644
@@ -3691,6 +3691,9 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 	}
 	case HTT_T2H_MSG_TYPE_MGMT_TX_COMPLETION: {
 		struct htt_tx_done tx_done = {};
+		struct ath10k_htt *htt = &ar->htt;
+		struct ath10k_htc *htc = &ar->htc;
+		struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid];
 		int status = __le32_to_cpu(resp->mgmt_tx_completion.status);
 		int info = __le32_to_cpu(resp->mgmt_tx_completion.info);
 
@@ -3716,6 +3719,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 			break;
 		}
 
+		if (htt->disable_tx_comp) {
+			spin_lock_bh(&htc->tx_lock);
+			ep->tx_credits++;
+			spin_unlock_bh(&htc->tx_lock);
+		}
+
 		status = ath10k_txrx_tx_unref(htt, &tx_done);
 		if (!status) {
 			spin_lock_bh(&htt->tx_lock);
@@ -3790,8 +3799,31 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 		skb_queue_tail(&htt->rx_in_ord_compl_q, skb);
 		return false;
 	}
-	case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND:
+	case HTT_T2H_MSG_TYPE_TX_CREDIT_UPDATE_IND: {
+		struct ath10k_htt *htt = &ar->htt;
+		struct ath10k_htc *htc = &ar->htc;
+		struct ath10k_htc_ep *ep = &ar->htc.endpoint[htt->eid];
+		u32 msg_word = __le32_to_cpu(*(__le32 *)resp);
+		int htt_credit_delta;
+
+		htt_credit_delta = HTT_TX_CREDIT_DELTA_ABS_GET(msg_word);
+		if (HTT_TX_CREDIT_SIGN_BIT_GET(msg_word))
+			htt_credit_delta = -htt_credit_delta;
+
+		ath10k_dbg(ar, ATH10K_DBG_HTT,
+			   "credit update: delta:%d\n",
+			   htt_credit_delta);
+
+		if (htt->disable_tx_comp) {
+			spin_lock_bh(&htc->tx_lock);
+			ep->tx_credits += htt_credit_delta;
+			spin_unlock_bh(&htc->tx_lock);
+			ath10k_dbg(ar, ATH10K_DBG_HTT,
+				   "credit total:%d\n",
+				   ep->tx_credits);
+		}
 		break;
+	}
 	case HTT_T2H_MSG_TYPE_CHAN_CHANGE: {
 		u32 phymode = __le32_to_cpu(resp->chan_change.phymode);
 		u32 freq = __le32_to_cpu(resp->chan_change.freq);
drivers/net/wireless/ath/ath10k/htt_tx.c +31 -0
index 2ef717f1..7eb753a8 100644
@@ -543,7 +543,35 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt)
 
 void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
 {
+	struct ath10k_htt *htt = &ar->htt;
+	struct htt_tx_done tx_done = {0};
+	struct htt_cmd_hdr *htt_hdr;
+	struct htt_data_tx_desc *desc_hdr;
+	u16 flags1;
+
 	dev_kfree_skb_any(skb);
+
+	if (!htt->disable_tx_comp)
+		return;
+
+	htt_hdr = (struct htt_cmd_hdr *)skb->data;
+	if (htt_hdr->msg_type != HTT_H2T_MSG_TYPE_TX_FRM)
+		return;
+
+	desc_hdr = (struct htt_data_tx_desc *)
+		(skb->data + sizeof(*htt_hdr));
+	flags1 = __le16_to_cpu(desc_hdr->flags1);
+
+	ath10k_dbg(ar, ATH10K_DBG_HTT,
+		   "htt tx complete msdu id:%u ,flags1:%x\n",
+		   __le16_to_cpu(desc_hdr->id), flags1);
+
+	if (flags1 & HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE)
+		return;
+
+	tx_done.status = HTT_TX_COMPL_STATE_ACK;
+	tx_done.msdu_id = __le16_to_cpu(desc_hdr->id);
+	ath10k_txrx_tx_unref(&ar->htt, &tx_done);
 }
 
 void ath10k_htt_hif_tx_complete(struct ath10k *ar, struct sk_buff *skb)
@@ -1261,6 +1289,9 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 		flags0 |= SM(ATH10K_HW_TXRX_MGMT,
 			     HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE);
 		flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT;
+
+		if (htt->disable_tx_comp)
+			flags1 |= HTT_DATA_TX_DESC_FLAGS1_TX_COMPLETE;
 		break;
 	}
 
drivers/net/wireless/ath/ath10k/hw.h +1 -1
index 2ae57c1..6349665 100644
@@ -759,7 +759,7 @@ struct ath10k_hw_ops {
 #define TARGET_TLV_NUM_TDLS_VDEVS		1
 #define TARGET_TLV_NUM_TIDS			((TARGET_TLV_NUM_PEERS) * 2)
 #define TARGET_TLV_NUM_MSDU_DESC		(1024 + 32)
-#define TARGET_TLV_NUM_MSDU_DESC_HL		64
+#define TARGET_TLV_NUM_MSDU_DESC_HL		1024
 #define TARGET_TLV_NUM_WOW_PATTERNS		22
 #define TARGET_TLV_MGMT_NUM_MSDU_DESC		(50)
 
drivers/net/wireless/ath/ath10k/sdio.c +23 -0
index 609bc0f..c641f1b 100644
@@ -1784,6 +1784,28 @@ static int ath10k_sdio_hif_swap_mailbox(struct ath10k *ar)
 	return 0;
 }
 
+static int ath10k_sdio_get_htt_tx_complete(struct ath10k *ar)
+{
+	u32 addr, val;
+	int ret;
+
+	addr = host_interest_item_address(HI_ITEM(hi_acs_flags));
+
+	ret = ath10k_sdio_hif_diag_read32(ar, addr, &val);
+	if (ret) {
+		ath10k_warn(ar,
+			    "unable to read hi_acs_flags for htt tx comple : %d\n", ret);
+		return ret;
+	}
+
+	ret = (val & HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_FW_ACK);
+
+	ath10k_dbg(ar, ATH10K_DBG_SDIO, "sdio reduce tx complete fw%sack\n",
+		   ret ? " " : " not ");
+
+	return ret;
+}
+
 /* HIF start/stop */
 
 static int ath10k_sdio_hif_start(struct ath10k *ar)
@@ -2067,6 +2089,7 @@ static void ath10k_sdio_hif_send_complete_check(struct ath10k *ar,
 	.start			= ath10k_sdio_hif_start,
 	.stop			= ath10k_sdio_hif_stop,
 	.swap_mailbox		= ath10k_sdio_hif_swap_mailbox,
+	.get_htt_tx_complete	= ath10k_sdio_get_htt_tx_complete,
 	.map_service_to_pipe	= ath10k_sdio_hif_map_service_to_pipe,
 	.get_default_pipe	= ath10k_sdio_hif_get_default_pipe,
 	.send_complete_check	= ath10k_sdio_hif_send_complete_check,
Signature · 1 line
1.9.1
#15 lore raw

RE: [PATCH v3 5/8] ath10k: disable TX complete indication of htt for sdio

Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 5/8] ath10k: disable TX complete indication of htt for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126231/

Quoted 6 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#16 lore raw

PATCH v3 6/8 ath10k: add htt TX bundle for sdio

In reply to Wen Gong

The transmission utilization ratio for sdio bus for small packet is slow, because the space and time cost for sdio bus is same for large length packet and small length packet. So the speed of data for large length packet is higher than small length.

Test result of different length of data:

data packet(byte) cost time(us) calculated rate(Mbps)

      256               28                73
      512               33               124
     1024               35               234
     1792               45               318
    14336              168               682
    28672              333               688
    57344              660               695

This patch change the TX packet from single packet to a large length bundle packet, max size is 32, it results in significant performance improvement on TX path.

This patch only effect sdio chip, it will not effect PCI, SNOC etc. It only enable bundle for sdio chip.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/core.c   |  14 +-
 drivers/net/wireless/ath/ath10k/core.h   |   4 +-
 drivers/net/wireless/ath/ath10k/htc.c    | 355 ++++++++++++++++++++++++++++---
 drivers/net/wireless/ath/ath10k/htc.h    |  21 +-
 drivers/net/wireless/ath/ath10k/htt.c    |   8 +
 drivers/net/wireless/ath/ath10k/htt.h    |   4 +
 drivers/net/wireless/ath/ath10k/htt_rx.c |   1 +
 drivers/net/wireless/ath/ath10k/htt_tx.c |   7 +-
 8 files changed, 377 insertions(+), 37 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +11 -3
index d56dcbd..9841533 100644
@@ -3195,6 +3195,11 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	if (!ar->workqueue_aux)
 		goto err_free_wq;
 
+	ar->workqueue_tx_complete =
+		create_singlethread_workqueue("ath10k_tx_complete_wq");
+	if (!ar->workqueue_tx_complete)
+		goto err_free_aux_wq;
+
 	mutex_init(&ar->conf_mutex);
 	mutex_init(&ar->dump_mutex);
 	spin_lock_init(&ar->data_lock);
@@ -3220,7 +3225,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	ret = ath10k_coredump_create(ar);
 	if (ret)
-		goto err_free_aux_wq;
+		goto err_free_tx_complete;
 
 	ret = ath10k_debug_create(ar);
 	if (ret)
@@ -3230,12 +3235,12 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 err_free_coredump:
 	ath10k_coredump_destroy(ar);
-
+err_free_tx_complete:
+	destroy_workqueue(ar->workqueue_tx_complete);
 err_free_aux_wq:
 	destroy_workqueue(ar->workqueue_aux);
 err_free_wq:
 	destroy_workqueue(ar->workqueue);
-
 err_free_mac:
 	ath10k_mac_destroy(ar);
 
@@ -3251,6 +3256,9 @@ void ath10k_core_destroy(struct ath10k *ar)
 	flush_workqueue(ar->workqueue_aux);
 	destroy_workqueue(ar->workqueue_aux);
 
+	flush_workqueue(ar->workqueue_tx_complete);
+	destroy_workqueue(ar->workqueue_tx_complete);
+
 	ath10k_debug_destroy(ar);
 	ath10k_coredump_destroy(ar);
 	ath10k_htt_tx_destroy(&ar->htt);
drivers/net/wireless/ath/ath10k/core.h +3 -1
index 4d7db07..be9eb37 100644
@@ -1079,7 +1079,7 @@ struct ath10k {
 	struct workqueue_struct *workqueue;
 	/* Auxiliary workqueue */
 	struct workqueue_struct *workqueue_aux;
-
+	struct workqueue_struct *workqueue_tx_complete;
 	/* prevents concurrent FW reconfiguration */
 	struct mutex conf_mutex;
 
@@ -1120,6 +1120,8 @@ struct ath10k {
 
 	struct work_struct register_work;
 	struct work_struct restart_work;
+	struct work_struct bundle_tx_work;
+	struct work_struct tx_complete_work;
 
 	/* cycle count is reported twice for each visited channel during scan.
 	 * access protected by data_lock
drivers/net/wireless/ath/ath10k/htc.c +325 -30

420 lines not on this page · raw message

drivers/net/wireless/ath/ath10k/htc.h +19 -2
index 0c93d19e..7b8e0d0 100644
@@ -40,6 +40,9 @@
  */
 
 #define HTC_HOST_MAX_MSG_PER_RX_BUNDLE        32
+#define HTC_HOST_MAX_MSG_PER_TX_BUNDLE        32
+#define HTC_HOST_MIN_MSG_PER_TX_BUNDLE        2
+#define HTC_HOST_MIN_CREDIT_PER_TX_BUNDLE     2
 
 enum ath10k_htc_tx_flags {
 	ATH10K_HTC_FLAG_NEED_CREDIT_UPDATE = 0x01,
@@ -70,8 +73,14 @@ struct ath10k_htc_hdr {
 		u8 seq_no; /* for tx */
 		u8 control_byte1;
 	} __packed;
-	u8 pad0;
-	u8 pad1;
+	union {
+		__le16 pad_len;
+		struct {
+			u8 pad0;
+			u8 pad1;
+		} __packed;
+	} __packed;
+
 } __packed __aligned(4);
 
 enum ath10k_ath10k_htc_msg_id {
@@ -340,7 +349,12 @@ struct ath10k_htc_ep {
 
 	u8 seq_no; /* for debugging */
 	int tx_credits;
+	int tx_credit_size;
 	bool tx_credit_flow_enabled;
+	bool bundle_tx;
+	struct sk_buff_head tx_req_head;
+	struct sk_buff_head tx_complete_head;
+
 };
 
 struct ath10k_htc_svc_tx_credits {
@@ -369,6 +383,7 @@ struct ath10k_htc {
 
 int ath10k_htc_init(struct ath10k *ar);
 int ath10k_htc_wait_target(struct ath10k_htc *htc);
+void ath10k_htc_setup_tx_req(struct ath10k_htc_ep *ep);
 int ath10k_htc_start(struct ath10k_htc *htc);
 int ath10k_htc_connect_service(struct ath10k_htc *htc,
 			       struct ath10k_htc_svc_conn_req  *conn_req,
@@ -378,6 +393,8 @@ void ath10k_htc_change_tx_credit_flow(struct ath10k_htc *htc,
 				      bool enable);
 int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid,
 		    struct sk_buff *packet);
+int ath10k_htc_send_hl(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid,
+		       struct sk_buff *packet);
 struct sk_buff *ath10k_htc_alloc_skb(struct ath10k *ar, int size);
 void ath10k_htc_tx_completion_handler(struct ath10k *ar, struct sk_buff *skb);
 void ath10k_htc_rx_completion_handler(struct ath10k *ar, struct sk_buff *skb);
drivers/net/wireless/ath/ath10k/htt.c +8 -0
index 4354bf2..127b4e4 100644
@@ -135,6 +135,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 {
 	struct ath10k_htc_svc_conn_req conn_req;
 	struct ath10k_htc_svc_conn_resp conn_resp;
+	struct ath10k *ar = htt->ar;
+	struct ath10k_htc_ep *ep;
 	int status;
 
 	memset(&conn_req, 0, sizeof(conn_req));
@@ -142,6 +144,7 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
 	conn_req.ep_ops.ep_tx_complete = ath10k_htt_htc_tx_complete;
 	conn_req.ep_ops.ep_rx_complete = ath10k_htt_htc_t2h_msg_handler;
+	conn_req.ep_ops.ep_tx_credits = ath10k_htt_op_ep_tx_credits;
 
 	/* connect to control service */
 	conn_req.service_id = ATH10K_HTC_SVC_ID_HTT_DATA_MSG;
@@ -154,6 +157,11 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
 	htt->eid = conn_resp.eid;
 
+	if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
+		ep = &ar->htc.endpoint[htt->eid];
+		ath10k_htc_setup_tx_req(ep);
+	}
+
 	htt->disable_tx_comp = ath10k_hif_get_htt_tx_complete(htt->ar);
 	if (htt->disable_tx_comp)
 		ath10k_htc_change_tx_credit_flow(&htt->ar->htc, htt->eid, true);
drivers/net/wireless/ath/ath10k/htt.h +4 -0
index 889bf9f..4851a2e 100644
@@ -2030,6 +2030,9 @@ struct ath10k_htt {
 	const struct ath10k_htt_tx_ops *tx_ops;
 	const struct ath10k_htt_rx_ops *rx_ops;
 	bool disable_tx_comp;
+	bool bundle_tx;
+	struct sk_buff_head tx_req_head;
+	struct sk_buff_head tx_complete_head;
 };
 
 struct ath10k_htt_tx_ops {
@@ -2276,6 +2279,7 @@ int ath10k_htt_tx_fetch_resp(struct ath10k *ar,
 			     __le16 fetch_seq_num,
 			     struct htt_tx_fetch_record *records,
 			     size_t num_records);
+void ath10k_htt_op_ep_tx_credits(struct ath10k *ar);
 
 void ath10k_htt_tx_txq_update(struct ieee80211_hw *hw,
 			      struct ieee80211_txq *txq);
drivers/net/wireless/ath/ath10k/htt_rx.c +1 -0
index 5bf3179..09825b1 100644
@@ -3821,6 +3821,7 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
 			ath10k_dbg(ar, ATH10K_DBG_HTT,
 				   "credit total:%d\n",
 				   ep->tx_credits);
+			ep->ep_ops.ep_tx_credits(htc->ar);
 		}
 		break;
 	}
drivers/net/wireless/ath/ath10k/htt_tx.c +6 -1
index 7eb753a8..e619b33 100644
@@ -541,6 +541,11 @@ void ath10k_htt_tx_free(struct ath10k_htt *htt)
 	ath10k_htt_tx_destroy(htt);
 }
 
+void ath10k_htt_op_ep_tx_credits(struct ath10k *ar)
+{
+	queue_work(ar->workqueue, &ar->bundle_tx_work);
+}
+
 void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb)
 {
 	struct ath10k_htt *htt = &ar->htt;
@@ -1357,7 +1362,7 @@ static int ath10k_htt_tx_hl(struct ath10k_htt *htt, enum ath10k_hw_txrx_mode txm
 	 */
 	tx_desc->peerid = __cpu_to_le32(HTT_INVALID_PEERID);
 
-	res = ath10k_htc_send(&htt->ar->htc, htt->eid, msdu);
+	res = ath10k_htc_send_hl(&htt->ar->htc, htt->eid, msdu);
 
 out:
 	return res;
Signature · 1 line
1.9.1
#17 lore raw

RE: [PATCH v3 6/8] ath10k: add htt TX bundle for sdio

Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 6/8] ath10k: add htt TX bundle for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126233/

Quoted 7 lines

1.9.1

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#18 lore raw

PATCH v3 7/8 ath10k: enable alt data of TX path for sdio

In reply to Wen Gong

The default credit size is 1792 bytes, but the IP mtu is 1500 bytes, then it has about 290 bytes's waste for each data packet on sdio transfer path for TX bundle, it will reduce the transmission utilization ratio for data packet.

This patch enable the small credit size in firmware, firmware will use the new credit size 1556 bytes, it will increase the transmission utilization ratio for data packet on TX patch. It results in significant performance improvement on TX path.

This patch only effect sdio chip, it will not effect PCI, SNOC etc.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/core.c | 19 +++++++++++++++++--
 drivers/net/wireless/ath/ath10k/htc.c  | 11 +++++++++--
 drivers/net/wireless/ath/ath10k/htc.h  | 11 +++++++++--
 3 files changed, 35 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +17 -2
index 9841533..9fd07c7 100644
@@ -31,6 +31,7 @@
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool disable_tx_comp = true;
+static bool alt_data = true;
 static bool skip_otp;
 static bool rawmode;
 static bool fw_diag_log;
@@ -45,6 +46,15 @@
 
 /* If upper layer need the TX complete status, it can enable tx complete */
 module_param(disable_tx_comp, bool, 0644);
+
+/* alt_data is only used for sdio chip, for previous version of firmware, its
+ * alt data size is 1544 which is not enough for native wifi, so it need to
+ * alt_data for the firmware.
+ * If the firmware has changed alt data size to 1556, then it can enable
+ * alt_data for the firmware.
+ * alt_data will not effect PCI, SNOC etc.
+ */
+module_param(alt_data, bool, 0644);
 module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
@@ -698,9 +708,14 @@ static void ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
 		param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
 
 	/* Alternate credit size of 1544 as used by SDIO firmware is
-	 * not big enough for mac80211 / native wifi frames. disable it
+	 * not big enough for mac80211 / native wifi frames. disable it.
+	 * If alternate credit size of 1556 as used by SDIO firmware is
+	 * big enough for mac80211 / native wifi frames. enable it
 	 */
-	param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+	if (alt_data && mode == ATH10K_FIRMWARE_MODE_NORMAL)
+		param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+	else
+		param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
 
 	if (mode == ATH10K_FIRMWARE_MODE_UTF)
 		param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
drivers/net/wireless/ath/ath10k/htc.c +9 -2
index 5269168..04298e1 100644
@@ -940,12 +940,15 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
 	 */
 	if (htc->control_resp_len >=
 	    sizeof(msg->hdr) + sizeof(msg->ready_ext)) {
+		htc->alt_data_credit_size =
+			__le16_to_cpu(msg->ready_ext.reserved) & 0x0fff;
 		htc->max_msgs_per_htc_bundle =
 			min_t(u8, msg->ready_ext.max_msgs_per_htc_bundle,
 			      HTC_HOST_MAX_MSG_PER_RX_BUNDLE);
 		ath10k_dbg(ar, ATH10K_DBG_HTC,
-			   "Extended ready message. RX bundle size: %d\n",
-			   htc->max_msgs_per_htc_bundle);
+			   "Extended ready message. RX bundle size: %d, alt size:%d\n",
+			   htc->max_msgs_per_htc_bundle,
+			   htc->alt_data_credit_size);
 	}
 
 	INIT_WORK(&ar->bundle_tx_work, ath10k_htc_bundle_tx_work);
@@ -1097,6 +1100,10 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
 	ep->tx_credits = tx_alloc;
 	ep->tx_credit_size = htc->target_credit_size;
 
+	if (conn_req->service_id == ATH10K_HTC_SVC_ID_HTT_DATA_MSG &&
+	    htc->alt_data_credit_size != 0)
+		ep->tx_credit_size = htc->alt_data_credit_size;
+
 	/* copy all the callbacks */
 	ep->ep_ops = conn_req->ep_ops;
 
drivers/net/wireless/ath/ath10k/htc.h +9 -2
index 7b8e0d0..f3a6ebb 100644
@@ -141,8 +141,14 @@ struct ath10k_htc_ready_extended {
 	struct ath10k_htc_ready base;
 	u8 htc_version; /* @enum ath10k_htc_version */
 	u8 max_msgs_per_htc_bundle;
-	u8 pad0;
-	u8 pad1;
+	union {
+		__le16 reserved;
+		struct {
+			u8 pad0;
+			u8 pad1;
+		} __packed;
+	} __packed;
+
 } __packed;
 
 struct ath10k_htc_conn_svc {
@@ -379,6 +385,7 @@ struct ath10k_htc {
 	int total_transmit_credits;
 	int target_credit_size;
 	u8 max_msgs_per_htc_bundle;
+	int alt_data_credit_size;
 };
 
 int ath10k_htc_init(struct ath10k *ar);
Signature · 1 line
1.9.1
#19 lore raw

Re: [PATCH v3 7/8] ath10k: enable alt data of TX path for sdio

Quoted 75 lines · Wen Gong

The default credit size is 1792 bytes, but the IP mtu is 1500 bytes, then it has about 290 bytes's waste for each data packet on sdio transfer path for TX bundle, it will reduce the transmission utilization ratio for data packet.

This patch enable the small credit size in firmware, firmware will use the new credit size 1556 bytes, it will increase the transmission utilization ratio for data packet on TX patch. It results in significant performance improvement on TX path.

This patch only effect sdio chip, it will not effect PCI, SNOC etc.

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00017-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/core.c | 19 +++++++++++++++++--
 drivers/net/wireless/ath/ath10k/htc.c  | 11 +++++++++--
 drivers/net/wireless/ath/ath10k/htc.h  | 11 +++++++++--
 3 files changed, 35 insertions(+), 6 deletions(-)
drivers/net/wireless/ath/ath10k/core.c +17 -2
index 9841533..9fd07c7 100644
@@ -31,6 +31,7 @@
 static unsigned int ath10k_cryptmode_param;
 static bool uart_print;
 static bool disable_tx_comp = true;
+static bool alt_data = true;
 static bool skip_otp;
 static bool rawmode;
 static bool fw_diag_log;
@@ -45,6 +46,15 @@
 
 /* If upper layer need the TX complete status, it can enable tx complete */
 module_param(disable_tx_comp, bool, 0644);
+
+/* alt_data is only used for sdio chip, for previous version of firmware, its
+ * alt data size is 1544 which is not enough for native wifi, so it need to
+ * alt_data for the firmware.
+ * If the firmware has changed alt data size to 1556, then it can enable
+ * alt_data for the firmware.
+ * alt_data will not effect PCI, SNOC etc.
+ */
+module_param(alt_data, bool, 0644);
 module_param(skip_otp, bool, 0644);
 module_param(rawmode, bool, 0644);
 module_param(fw_diag_log, bool, 0644);
@@ -698,9 +708,14 @@ static void ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
                param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
 
        /* Alternate credit size of 1544 as used by SDIO firmware is
-        * not big enough for mac80211 / native wifi frames. disable it
+        * not big enough for mac80211 / native wifi frames. disable it.
+        * If alternate credit size of 1556 as used by SDIO firmware is
+        * big enough for mac80211 / native wifi frames. enable it
         */
-       param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+       if (alt_data && mode == ATH10K_FIRMWARE_MODE_NORMAL)
+               param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+       else
+               param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
 
        if (mode == ATH10K_FIRMWARE_MODE_UTF)
                param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
drivers/net/wireless/ath/ath10k/htc.c +0 -0
index 5269168..04298e1 100644

drivers/net/wireless/ath/ath10k/htc.c int ath10k_htc_wait_target(struct ath10k_htc *htc) · line 944

Quoted 5 lines
drivers/net/wireless/ath/ath10k/htc.c +2 -0
@@ -940,12 +940,15 @@ int ath10k_htc_wait_target(struct ath10k_htc *htc)
         */
        if (htc->control_resp_len >=
            sizeof(msg->hdr) + sizeof(msg->ready_ext)) {
+               htc->alt_data_credit_size =
+                       __le16_to_cpu(msg->ready_ext.reserved) & 0x0fff;

Please define 0x0fff as a macro. (I believe most other masks are macros in this driver).

Quoted 53 lines
drivers/net/wireless/ath/ath10k/htc.c +7 -2
                htc->max_msgs_per_htc_bundle =
                        min_t(u8, msg->ready_ext.max_msgs_per_htc_bundle,
                              HTC_HOST_MAX_MSG_PER_RX_BUNDLE);
                ath10k_dbg(ar, ATH10K_DBG_HTC,
-                          "Extended ready message. RX bundle size: %d\n",
-                          htc->max_msgs_per_htc_bundle);
+                          "Extended ready message. RX bundle size: %d, alt size:%d\n",
+                          htc->max_msgs_per_htc_bundle,
+                          htc->alt_data_credit_size);
        }
 
        INIT_WORK(&ar->bundle_tx_work, ath10k_htc_bundle_tx_work);
@@ -1097,6 +1100,10 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc,
        ep->tx_credits = tx_alloc;
        ep->tx_credit_size = htc->target_credit_size;
 
+       if (conn_req->service_id == ATH10K_HTC_SVC_ID_HTT_DATA_MSG &&
+           htc->alt_data_credit_size != 0)
+               ep->tx_credit_size = htc->alt_data_credit_size;
+
        /* copy all the callbacks */
        ep->ep_ops = conn_req->ep_ops;
 
drivers/net/wireless/ath/ath10k/htc.h +9 -3
index 7b8e0d0..f3a6ebb 100644
@@ -141,8 +141,14 @@ struct ath10k_htc_ready_extended {
        struct ath10k_htc_ready base;
        u8 htc_version; /* @enum ath10k_htc_version */
        u8 max_msgs_per_htc_bundle;
-       u8 pad0;
-       u8 pad1;
+       union {
+               __le16 reserved;
+               struct {
+                       u8 pad0;
+                       u8 pad1;
+               } __packed;
+       } __packed;
+
 } __packed;
 
 struct ath10k_htc_conn_svc {
@@ -379,6 +385,7 @@ struct ath10k_htc {
        int total_transmit_credits;
        int target_credit_size;
        u8 max_msgs_per_htc_bundle;
+       int alt_data_credit_size;
 };
 
 int ath10k_htc_init(struct ath10k *ar);
--
Quoted 2 lines

1.9.1

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#20 lore raw

RE: [PATCH v3 7/8] ath10k: enable alt data of TX path for sdio

In reply to Wen Gong
Quoted 7 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Wen Gong
Sent: Wednesday, August 28, 2019 9:16 PM
To: [email protected]
Cc: [email protected]
Subject: [EXT] [PATCH v3 7/8] ath10k: enable alt data of TX path for sdio

Patch v4 sent, https://patchwork.kernel.org/patch/11126235/

Quoted 5 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

author
#21 lore raw

PATCH v3 8/8 ath10k: enable napi on RX path for sdio

In reply to Wen Gong

For tcp RX, the quantity of tcp acks to remote is 1/2 of the quantity of tcp data from remote, then it will have many small length packets on TX path of sdio bus, then it reduce the RX packets's bandwidth of tcp.

This patch enable napi on RX path, then the RX packet of tcp will not feed to tcp stack immeditely from mac80211 since GRO is enabled by default, it will feed to tcp stack after napi complete, if rx bundle is enabled, then it will feed to tcp stack one time for each bundle of RX. For example, RX bundle size is 32, then tcp stack will receive one large length packet, its length is neary 1500*32, then tcp stack will send a tcp ack for this large packet, this will reduce the tcp acks ratio from 1/2 to 1/32. This results in significant performance improvement for tcp RX.

Tcp rx throughout is 240Mbps without this patch, and it arrive 390Mbps with this patch. The cpu usage has no obvious difference with and without NAPI.

call stack for each RX packet on GRO path:
(skb length is about 1500 bytes)
skb_gro_receive ([kernel.kallsyms]) tcp4_gro_receive ([kernel.kallsyms]) inet_gro_receive ([kernel.kallsyms]) dev_gro_receive ([kernel.kallsyms]) napi_gro_receive ([kernel.kallsyms]) ieee80211_deliver_skb ([mac80211]) ieee80211_rx_handlers ([mac80211]) ieee80211_prepare_and_rx_handle ([mac80211]) ieee80211_rx_napi ([mac80211]) ath10k_htt_rx_proc_rx_ind_hl ([ath10k_core]) ath10k_htt_rx_pktlog_completion_handler ([ath10k_core]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms])

call stack for napi complete and send tcp ack from tcp stack:
(skb length is about 1500*32 bytes)
_tcp_ack_snd_check ([kernel.kallsyms]) tcp_v4_do_rcv ([kernel.kallsyms])
tcp_v4_rcv ([kernel.kallsyms]) local_deliver_finish ([kernel.kallsyms]) ip_local_deliver ([kernel.kallsyms])
ip_rcv_finish ([kernel.kallsyms])
ip_rcv ([kernel.kallsyms])
netif_receive_skb_core ([kernel.kallsyms]) netif_receive_skb_one_core([kernel.kallsyms]) netif_receive_skb ([kernel.kallsyms]) netif_receive_skb_internal ([kernel.kallsyms]) napi_gro_complete ([kernel.kallsyms]) napi_gro_flush ([kernel.kallsyms]) napi_complete_done ([kernel.kallsyms]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) __softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms])

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/htt.c    |  2 ++
 drivers/net/wireless/ath/ath10k/htt.h    |  3 +++
 drivers/net/wireless/ath/ath10k/htt_rx.c | 45 ++++++++++++++++++++++++++------
 drivers/net/wireless/ath/ath10k/sdio.c   | 33 +++++++++++++++++++++++
 4 files changed, 75 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/htt.c +2 -0
index 127b4e4..f69346f 100644
@@ -157,6 +157,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
 	htt->eid = conn_resp.eid;
 
+	skb_queue_head_init(&htt->rx_indication_head);
+
 	if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
 		ep = &ar->htc.endpoint[htt->eid];
 		ath10k_htc_setup_tx_req(ep);
drivers/net/wireless/ath/ath10k/htt.h +3 -0
index 4851a2e..462a25b 100644
@@ -1879,6 +1879,8 @@ struct ath10k_htt {
 	struct ath10k *ar;
 	enum ath10k_htc_ep_id eid;
 
+	struct sk_buff_head rx_indication_head;
+
 	u8 target_version_major;
 	u8 target_version_minor;
 	struct completion target_version_received;
@@ -2298,6 +2300,7 @@ int ath10k_htt_tx_mgmt_inc_pending(struct ath10k_htt *htt, bool is_mgmt,
 void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
 					     struct sk_buff *skb);
 int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget);
+int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget);
 void ath10k_htt_set_tx_ops(struct ath10k_htt *htt);
 void ath10k_htt_set_rx_ops(struct ath10k_htt *htt);
 #endif
drivers/net/wireless/ath/ath10k/htt_rx.c +37 -8

64 lines not on this page · raw message

drivers/net/wireless/ath/ath10k/sdio.c +33 -0
index c641f1b..23e92ea 100644
@@ -1400,6 +1400,9 @@ static void ath10k_rx_indication_async_work(struct work_struct *work)
 		spin_lock_bh(&ar_sdio->wr_async_lock_rx);
 	}
 
+	if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
+		napi_schedule(&ar->napi);
+
 	spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
 }
 
@@ -1813,6 +1816,8 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
 	struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
 	int ret;
 
+	napi_enable(&ar->napi);
+
 	/* Sleep 20 ms before HIF interrupts are disabled.
 	 * This will give target plenty of time to process the BMI done
 	 * request before interrupts are disabled.
@@ -1951,6 +1956,9 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
 	}
 
 	spin_unlock_bh(&ar_sdio->wr_async_lock);
+
+	napi_synchronize(&ar->napi);
+	napi_disable(&ar->napi);
 }
 
 #ifdef CONFIG_PM
@@ -2127,6 +2135,26 @@ static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
 
 #endif /* CONFIG_PM_SLEEP */
 
+static int ath10k_sdio_napi_poll(struct napi_struct *ctx, int budget)
+{
+	struct ath10k *ar = container_of(ctx, struct ath10k, napi);
+	int done;
+
+	done = ath10k_htt_rx_hl_indication(ar, budget);
+	ath10k_dbg(ar, ATH10K_DBG_SDIO, "napi poll: done: %d,budget:%d\n", done, budget);
+
+	if (done < budget)
+		napi_complete_done(ctx, done);
+
+	return done;
+}
+
+void ath10k_sdio_init_napi(struct ath10k *ar)
+{
+	netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_sdio_napi_poll,
+		       ATH10K_NAPI_BUDGET);
+}
+
 static int ath10k_sdio_probe(struct sdio_func *func,
 			     const struct sdio_device_id *id)
 {
@@ -2152,6 +2180,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
 		return -ENOMEM;
 	}
 
+	ath10k_sdio_init_napi(ar);
+
 	ath10k_dbg(ar, ATH10K_DBG_BOOT,
 		   "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
 		   func->num, func->vendor, func->device,
@@ -2272,6 +2302,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
 		   func->num, func->vendor, func->device);
 
 	ath10k_core_unregister(ar);
+
+	netif_napi_del(&ar->napi);
+
 	ath10k_core_destroy(ar);
 
 	flush_workqueue(ar_sdio->workqueue);
Signature · 1 line
1.9.1
#22 lore raw

Re: [PATCH v3 8/8] ath10k: enable napi on RX path for sdio

Quoted 140 lines · Wen Gong

For tcp RX, the quantity of tcp acks to remote is 1/2 of the quantity of tcp data from remote, then it will have many small length packets on TX path of sdio bus, then it reduce the RX packets's bandwidth of tcp.

This patch enable napi on RX path, then the RX packet of tcp will not feed to tcp stack immeditely from mac80211 since GRO is enabled by default, it will feed to tcp stack after napi complete, if rx bundle is enabled, then it will feed to tcp stack one time for each bundle of RX. For example, RX bundle size is 32, then tcp stack will receive one large length packet, its length is neary 1500*32, then tcp stack will send a tcp ack for this large packet, this will reduce the tcp acks ratio from 1/2 to 1/32. This results in significant performance improvement for tcp RX.

Tcp rx throughout is 240Mbps without this patch, and it arrive 390Mbps with this patch. The cpu usage has no obvious difference with and without NAPI.

call stack for each RX packet on GRO path:
(skb length is about 1500 bytes)
skb_gro_receive ([kernel.kallsyms]) tcp4_gro_receive ([kernel.kallsyms]) inet_gro_receive ([kernel.kallsyms]) dev_gro_receive ([kernel.kallsyms]) napi_gro_receive ([kernel.kallsyms]) ieee80211_deliver_skb ([mac80211]) ieee80211_rx_handlers ([mac80211]) ieee80211_prepare_and_rx_handle ([mac80211]) ieee80211_rx_napi ([mac80211]) ath10k_htt_rx_proc_rx_ind_hl ([ath10k_core]) ath10k_htt_rx_pktlog_completion_handler ([ath10k_core]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms])

call stack for napi complete and send tcp ack from tcp stack:
(skb length is about 1500*32 bytes)
_tcp_ack_snd_check ([kernel.kallsyms]) tcp_v4_do_rcv ([kernel.kallsyms])
tcp_v4_rcv ([kernel.kallsyms]) local_deliver_finish ([kernel.kallsyms]) ip_local_deliver ([kernel.kallsyms])
ip_rcv_finish ([kernel.kallsyms])
ip_rcv ([kernel.kallsyms])
netif_receive_skb_core ([kernel.kallsyms]) netif_receive_skb_one_core([kernel.kallsyms]) netif_receive_skb ([kernel.kallsyms]) netif_receive_skb_internal ([kernel.kallsyms]) napi_gro_complete ([kernel.kallsyms]) napi_gro_flush ([kernel.kallsyms]) napi_complete_done ([kernel.kallsyms]) ath10k_sdio_napi_poll ([ath10k_sdio]) net_rx_action ([kernel.kallsyms]) __softirqentry_text_start ([kernel.kallsyms]) do_softirq ([kernel.kallsyms])

Tested with QCA6174 SDIO with firmware
WLAN.RMH.4.4.1-00007-QCARMSWP-1.

---
v2:no change
v3:change some code style

 drivers/net/wireless/ath/ath10k/htt.c    |  2 ++
 drivers/net/wireless/ath/ath10k/htt.h    |  3 +++
 drivers/net/wireless/ath/ath10k/htt_rx.c | 45 ++++++++++++++++++++++++++------
 drivers/net/wireless/ath/ath10k/sdio.c   | 33 +++++++++++++++++++++++
 4 files changed, 75 insertions(+), 8 deletions(-)
drivers/net/wireless/ath/ath10k/htt.c +2 -0
index 127b4e4..f69346f 100644
@@ -157,6 +157,8 @@ int ath10k_htt_connect(struct ath10k_htt *htt)
 
        htt->eid = conn_resp.eid;
 
+       skb_queue_head_init(&htt->rx_indication_head);
+
        if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL) {
                ep = &ar->htc.endpoint[htt->eid];
                ath10k_htc_setup_tx_req(ep);
drivers/net/wireless/ath/ath10k/htt.h +3 -0
index 4851a2e..462a25b 100644
@@ -1879,6 +1879,8 @@ struct ath10k_htt {
        struct ath10k *ar;
        enum ath10k_htc_ep_id eid;
 
+       struct sk_buff_head rx_indication_head;
+
        u8 target_version_major;
        u8 target_version_minor;
        struct completion target_version_received;
@@ -2298,6 +2300,7 @@ int ath10k_htt_tx_mgmt_inc_pending(struct ath10k_htt *htt, bool is_mgmt,
 void ath10k_htt_rx_pktlog_completion_handler(struct ath10k *ar,
                                             struct sk_buff *skb);
 int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget);
+int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget);
 void ath10k_htt_set_tx_ops(struct ath10k_htt *htt);
 void ath10k_htt_set_rx_ops(struct ath10k_htt *htt);
 #endif
drivers/net/wireless/ath/ath10k/htt_rx.c +6 -8
index 09825b1..71b4afe 100644
@@ -2263,7 +2263,7 @@ static bool ath10k_htt_rx_proc_rx_ind_hl(struct ath10k_htt *htt,
        if (mpdu_ranges->mpdu_range_status == HTT_RX_IND_MPDU_STATUS_TKIP_MIC_ERR)
                rx_status->flag |= RX_FLAG_MMIC_ERROR;
 
-       ieee80211_rx_ni(ar->hw, skb);
+       ieee80211_rx_napi(ar->hw, NULL, skb, &ar->napi);
 
        /* We have delivered the skb to the upper layers (mac80211) so we
         * must not free it.
@@ -3664,14 +3664,12 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
                break;
        }
        case HTT_T2H_MSG_TYPE_RX_IND:
-               if (ar->bus_param.dev_type == ATH10K_DEV_TYPE_HL)
-                       return ath10k_htt_rx_proc_rx_ind_hl(htt,
-                                                           &resp->rx_ind_hl,
-                                                           skb,
-                                                           HTT_RX_PN_CHECK,
-                                                           HTT_RX_NON_TKIP_MIC);
-               else
+               if (ar->bus_param.dev_type != ATH10K_DEV_TYPE_HL) {
                        ath10k_htt_rx_proc_rx_ind_ll(htt, &resp->rx_ind);
+               } else {
+                       skb_queue_tail(&htt->rx_indication_head, skb);
+                       return false;
+               }
                break;
        case HTT_T2H_MSG_TYPE_PEER_MAP: {
                struct htt_peer_map_event ev = {

drivers/net/wireless/ath/ath10k/htt_rx.c static int ath10k_htt_rx_deliver_msdu(struct ath10k *ar, int quota, int budget) · line 3901

Quoted 10 lines
drivers/net/wireless/ath/ath10k/htt_rx.c +7 -0
@@ -3894,6 +3892,37 @@ static int ath10k_htt_rx_deliver_msdu(struct ath10k *ar, int quota, int budget)
        return quota;
 }
 
+int ath10k_htt_rx_hl_indication(struct ath10k *ar, int budget)
+{
+       struct htt_resp *resp;
+       struct ath10k_htt *htt = &ar->htt;
+       struct sk_buff *skb;
+       bool release;
+       int quota = 0;

Don't init to 0.

Quoted 61 lines
drivers/net/wireless/ath/ath10k/htt_rx.c +24 -0
+
+       for (quota = 0; quota < budget; quota++) {
+               skb = skb_dequeue(&htt->rx_indication_head);
+               if (!skb)
+                       break;
+
+               resp = (struct htt_resp *)skb->data;
+
+               release = ath10k_htt_rx_proc_rx_ind_hl(htt,
+                                                      &resp->rx_ind_hl,
+                                                      skb,
+                                                      HTT_RX_PN_CHECK,
+                                                      HTT_RX_NON_TKIP_MIC);
+
+               if (release)
+                       dev_kfree_skb_any(skb);
+
+               ath10k_dbg(ar, ATH10K_DBG_HTT, "rx indication poll pending count:%d\n",
+                          skb_queue_len(&htt->rx_indication_head));
+       }
+       return quota;
+}
+EXPORT_SYMBOL(ath10k_htt_rx_hl_indication);
+
 int ath10k_htt_txrx_compl_task(struct ath10k *ar, int budget)
 {
        struct ath10k_htt *htt = &ar->htt;
drivers/net/wireless/ath/ath10k/sdio.c +8 -0
index c641f1b..23e92ea 100644
@@ -1400,6 +1400,9 @@ static void ath10k_rx_indication_async_work(struct work_struct *work)
                spin_lock_bh(&ar_sdio->wr_async_lock_rx);
        }
 
+       if (test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
+               napi_schedule(&ar->napi);
+
        spin_unlock_bh(&ar_sdio->wr_async_lock_rx);
 }
 
@@ -1813,6 +1816,8 @@ static int ath10k_sdio_hif_start(struct ath10k *ar)
        struct ath10k_sdio *ar_sdio = ath10k_sdio_priv(ar);
        int ret;
 
+       napi_enable(&ar->napi);
+
        /* Sleep 20 ms before HIF interrupts are disabled.
         * This will give target plenty of time to process the BMI done
         * request before interrupts are disabled.
@@ -1951,6 +1956,9 @@ static void ath10k_sdio_hif_stop(struct ath10k *ar)
        }
 
        spin_unlock_bh(&ar_sdio->wr_async_lock);
+
+       napi_synchronize(&ar->napi);
+       napi_disable(&ar->napi);
 }
 
 #ifdef CONFIG_PM

drivers/net/wireless/ath/ath10k/sdio.c static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend, · line 2144

Quoted 10 lines
drivers/net/wireless/ath/ath10k/sdio.c +7 -0
@@ -2127,6 +2135,26 @@ static SIMPLE_DEV_PM_OPS(ath10k_sdio_pm_ops, ath10k_sdio_pm_suspend,
 
 #endif /* CONFIG_PM_SLEEP */
 
+static int ath10k_sdio_napi_poll(struct napi_struct *ctx, int budget)
+{
+       struct ath10k *ar = container_of(ctx, struct ath10k, napi);
+       int done;
+
+       done = ath10k_htt_rx_hl_indication(ar, budget);
+       ath10k_dbg(ar, ATH10K_DBG_SDIO, "napi poll: done: %d,budget:%d\n", done, budget);

This is a debug string, but still, please be consistent in spacing:
"napi poll: done: %d, budget: %d\n"

Quoted 36 lines
drivers/net/wireless/ath/ath10k/sdio.c +18 -1
+
+       if (done < budget)
+               napi_complete_done(ctx, done);
+
+       return done;
+}
+
+void ath10k_sdio_init_napi(struct ath10k *ar)
+{
+       netif_napi_add(&ar->napi_dev, &ar->napi, ath10k_sdio_napi_poll,
+                      ATH10K_NAPI_BUDGET);
+}
+
 static int ath10k_sdio_probe(struct sdio_func *func,
                             const struct sdio_device_id *id)
 {
@@ -2152,6 +2180,8 @@ static int ath10k_sdio_probe(struct sdio_func *func,
                return -ENOMEM;
        }
 
+       ath10k_sdio_init_napi(ar);
+
        ath10k_dbg(ar, ATH10K_DBG_BOOT,
                   "sdio new func %d vendor 0x%x device 0x%x block 0x%x/0x%x\n",
                   func->num, func->vendor, func->device,
@@ -2272,6 +2302,9 @@ static void ath10k_sdio_remove(struct sdio_func *func)
                   func->num, func->vendor, func->device);
 
        ath10k_core_unregister(ar);
+
+       netif_napi_del(&ar->napi);
+
        ath10k_core_destroy(ar);
 
        flush_workqueue(ar_sdio->workqueue);
--
Quoted 2 lines

1.9.1

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#23 lore raw

RE: [PATCH v3 8/8] ath10k: enable napi on RX path for sdio

Quoted 10 lines

-----Original Message-----
From: ath10k <[email protected]> On Behalf Of Nicolas Boichat
Sent: Friday, August 30, 2019 11:20 AM
To: Wen Gong <[email protected]>
Cc: open list:NETWORKING DRIVERS (WIRELESS) <linux- [email protected]>; [email protected]
Subject: [EXT] Re: [PATCH v3 8/8] ath10k: enable napi on RX path for sdio

On Fri, Aug 30, 2019 at 1:50 AM Wen Gong <[email protected]> wrote:

Patch v4 sent, https://patchwork.kernel.org/patch/11126239/

Quoted 5 lines

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k