dt-bindings: ASoC: Add tas2770 smart PA dt bindings
PATCH v7 1/1 dt-bindings: ASoC: Add tas2770 smart PA dt bindings
From: Frank Shi <[email protected]>
Add tas2770 smart PA dt bindings
--- .../devicetree/bindings/sound/tas2770.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
Documentation/devicetree/bindings/sound/tas2770.txt new file +37 -0
@@ -0,0 +1,37 @@ +Texas Instruments TAS2770 Smart PA + +The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + + - compatible: - Should contain "ti,tas2770". + - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. + - ti,imon-slot-no:- TDM TX current sense time slot. + - ti,vmon-slot-no:- TDM TX voltage sense time slot. + +Optional properties: + +- interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. +- interrupts: interrupt specification for data-ready. + +Examples: + + tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&msm_gpio>; + interrupts = <97 0>; + ti,asi-format = <0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; +
Signature · 1 line
2.7.4
PATCH v7 1/1 tas2770: add tas2770 smart PA kernel driver
From: Frank Shi <[email protected]>
add tas2770 smart PA kernel driver
--- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2770.c | 808 +++++++++++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2770.h | 164 +++++++++ 4 files changed, 979 insertions(+) create mode 100644 sound/soc/codecs/tas2770.c create mode 100644 sound/soc/codecs/tas2770.h
sound/soc/codecs/Kconfig +5 -0
@@ -111,6 +111,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_STI_SAS select SND_SOC_TAS2552 if I2C + select SND_SOC_TAS2770 if I2C select SND_SOC_TAS5086 if I2C select SND_SOC_TAS571X if I2C select SND_SOC_TFA9879 if I2C
@@ -652,6 +653,10 @@ config SND_SOC_TAS2552 tristate "Texas Instruments TAS2552 Mono Audio amplifier" depends on I2C +config SND_SOC_TAS2770 + tristate "Texas Instruments TAS2770 speaker amplifier" + depends on I2C + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C
sound/soc/codecs/Makefile +2 -0
@@ -116,6 +116,7 @@ snd-soc-stac9766-objs := stac9766.o snd-soc-sti-sas-objs := sti-sas.o snd-soc-tas5086-objs := tas5086.o snd-soc-tas571x-objs := tas571x.o +snd-soc-tas2770-objs := tas2770.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
@@ -332,6 +333,7 @@ obj-$(CONFIG_SND_SOC_STI_SAS) += snd-soc-sti-sas.o obj-$(CONFIG_SND_SOC_TAS2552) += snd-soc-tas2552.o obj-$(CONFIG_SND_SOC_TAS5086) += snd-soc-tas5086.o obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o +obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
sound/soc/codecs/tas2770.c new file +808 -0
808 lines not on this page · raw message
sound/soc/codecs/tas2770.h new file +164 -0
164 lines not on this page · raw message
Signature · 1 line
2.7.4
Mark Brown
maintainerApplied "tas2770: add tas2770 smart PA kernel driver" to the asoc tree
The patch
tas2770: add tas2770 smart PA kernel driver
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 1a476abc723e644248dba975b71122fcf878703b Mon Sep 17 00:00:00 2001
From: Frank Shi <[email protected]>
Date: Fri, 20 Sep 2019 14:58:29 +0800
Subject: [PATCH] tas2770: add tas2770 smart PA kernel driver
add tas2770 smart PA kernel driver
--- sound/soc/codecs/Kconfig | 5 + sound/soc/codecs/Makefile | 2 + sound/soc/codecs/tas2770.c | 808 +++++++++++++++++++++++++++++++++++++ sound/soc/codecs/tas2770.h | 164 ++++++++ 4 files changed, 979 insertions(+) create mode 100644 sound/soc/codecs/tas2770.c create mode 100644 sound/soc/codecs/tas2770.h
sound/soc/codecs/Kconfig +5 -0
@@ -179,6 +179,7 @@ config SND_SOC_ALL_CODECS select SND_SOC_STAC9766 if SND_SOC_AC97_BUS select SND_SOC_STI_SAS select SND_SOC_TAS2552 if I2C + select SND_SOC_TAS2770 if I2C select SND_SOC_TAS5086 if I2C select SND_SOC_TAS571X if I2C select SND_SOC_TAS5720 if I2C
@@ -1104,6 +1105,10 @@ config SND_SOC_TAS2552 tristate "Texas Instruments TAS2552 Mono Audio amplifier" depends on I2C +config SND_SOC_TAS2770 + tristate "Texas Instruments TAS2770 speaker amplifier" + depends on I2C + config SND_SOC_TAS5086 tristate "Texas Instruments TAS5086 speaker amplifier" depends on I2C
sound/soc/codecs/Makefile +2 -0
@@ -196,6 +196,7 @@ snd-soc-tas571x-objs := tas571x.o snd-soc-tas5720-objs := tas5720.o snd-soc-tas6424-objs := tas6424.o snd-soc-tda7419-objs := tda7419.o +snd-soc-tas2770-objs := tas2770.o snd-soc-tfa9879-objs := tfa9879.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic23-i2c-objs := tlv320aic23-i2c.o
@@ -479,6 +480,7 @@ obj-$(CONFIG_SND_SOC_TAS571X) += snd-soc-tas571x.o obj-$(CONFIG_SND_SOC_TAS5720) += snd-soc-tas5720.o obj-$(CONFIG_SND_SOC_TAS6424) += snd-soc-tas6424.o obj-$(CONFIG_SND_SOC_TDA7419) += snd-soc-tda7419.o +obj-$(CONFIG_SND_SOC_TAS2770) += snd-soc-tas2770.o obj-$(CONFIG_SND_SOC_TFA9879) += snd-soc-tfa9879.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC23_I2C) += snd-soc-tlv320aic23-i2c.o
sound/soc/codecs/tas2770.c new file +808 -0
808 lines not on this page · raw message
sound/soc/codecs/tas2770.h new file +164 -0
164 lines not on this page · raw message
Signature · 1 line
2.20.1
Mark Brown
maintainerApplied "dt-bindings: ASoC: Add tas2770 smart PA dt bindings" to the asoc tree
In reply to [email protected]The patch
dt-bindings: ASoC: Add tas2770 smart PA dt bindings
has been applied to the asoc tree at
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.5
All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying to this mail.
Thanks,
Mark
From 4b7151dadfd450b837b6b28073ad9f19f4a7547c Mon Sep 17 00:00:00 2001
From: Frank Shi <[email protected]>
Date: Fri, 20 Sep 2019 14:58:28 +0800
Subject: [PATCH] dt-bindings: ASoC: Add tas2770 smart PA dt bindings
Add tas2770 smart PA dt bindings
--- .../devicetree/bindings/sound/tas2770.txt | 37 +++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/tas2770.txt
Documentation/devicetree/bindings/sound/tas2770.txt new file +37 -0
@@ -0,0 +1,37 @@ +Texas Instruments TAS2770 Smart PA + +The TAS2770 is a mono, digital input Class-D audio amplifier optimized for +efficiently driving high peak power into small loudspeakers. +Integrated speaker voltage and current sense provides for +real time monitoring of loudspeaker behavior. + +Required properties: + + - compatible: - Should contain "ti,tas2770". + - reg: - The i2c address. Should contain <0x4c>, <0x4d>,<0x4e>, or <0x4f>. + - #address-cells - Should be <1>. + - #size-cells - Should be <0>. + - ti,asi-format: - Sets TDM RX capture edge. 0->Rising; 1->Falling. + - ti,imon-slot-no:- TDM TX current sense time slot. + - ti,vmon-slot-no:- TDM TX voltage sense time slot. + +Optional properties: + +- interrupt-parent: the phandle to the interrupt controller which provides + the interrupt. +- interrupts: interrupt specification for data-ready. + +Examples: + + tas2770@4c { + compatible = "ti,tas2770"; + reg = <0x4c>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&msm_gpio>; + interrupts = <97 0>; + ti,asi-format = <0>; + ti,imon-slot-no = <0>; + ti,vmon-slot-no = <2>; + }; +
Signature · 1 line
2.20.1