arm64: meson-g12b: Add support for the Ugoos AM6
Subsystems (2)
v4 cover arm64: meson-g12b: Add support for the Ugoos AM6
This patchset adds support for the Ugoos AM6, an Android STB based on the Amlogic W400 reference design with the S922X chipset.
v2: correction of minor nits
v3: address regulator and GPIO corrections from Neil Armstrong (using schematic excerpts from Ugoos) and related v2 comments from Martin Blumenstingle. Add acks on patches 1/2 from Rob Herring.
v4: address nits from Martin except for the vcc_3v3 node as it's not known how to handle the vcc_3v3 regulator managed by ATF firmware, so it remains untouched/undeclared like other g12a/g12b/sm1 boards.
Christian Hewitt (3):
dt-bindings: Add vendor prefix for Ugoos
dt-bindings: arm: amlogic: Add support for the Ugoos AM6
arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +++++++++++++++++++++ 4 files changed, 561 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
Signature · 1 line
2.7.4
PATCH v4 1/3 dt-bindings: Add vendor prefix for Ugoos
Ugoos Industrial Co., Ltd. are a manufacturer of ARM based TV Boxes/Dongles, Digital Signage and Advertisement Solutions [0].
[0] (https://ugoos.com)
--- Documentation/devicetree/bindings/vendor-prefixes.yaml | 2 ++ 1 file changed, 2 insertions(+)
Documentation/devicetree/bindings/vendor-prefixes.yaml +2 -0
@@ -965,6 +965,8 @@ patternProperties: description: Ubiquiti Networks "^udoo,.*": description: Udoo + "^ugoos,.*": + description: Ugoos Industrial Co., Ltd. "^uniwest,.*": description: United Western Technologies Corp (UniWest) "^upisemi,.*":
Signature · 1 line
2.7.4
PATCH v4 2/3 dt-bindings: arm: amlogic: Add support for the Ugoos AM6
In reply to Christian HewittThe Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the S922X chipset.
--- Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + 1 file changed, 1 insertion(+)
Documentation/devicetree/bindings/arm/amlogic.yaml +1 -0
@@ -139,6 +139,7 @@ properties: items: - enum: - hardkernel,odroid-n2 + - ugoos,am6 - const: amlogic,g12b ...
Signature · 1 line
2.7.4
PATCH v4 3/3 arm64: dts: meson-g12b-ugoos-am6: add initial device-tree
In reply to Christian HewittThe Ugoos AM6 is based on the Amlogic W400 (G12B) reference design using the S922X chipset. Hardware specifications:
- 2GB LPDDR4 RAM
- 16GB eMMC storage
- 10/100/1000 Base-T Ethernet using External RGMII PHY
- 802.11 a/b/g/b/ac + BT 5.0 sdio wireless (Ampak 6398S)
- HDMI 2.0 (4k@60p) video
- Composite video + 2-channel audio output on 3.5mm jack
- S/PDIF audio output
- Aux input
- 1x USB 3.0
- 3x USB 2.0
- 1x micro SD card slot
The device-tree is largely based on meson-g12b-odroid-n2 but with audio and USB config copied from meson-g12a-x96-max.
--- arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +++++++++++++++++++++ 2 files changed, 558 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
arch/arm64/boot/dts/amlogic/Makefile +1 -0
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-g12b-ugoos-am6.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nanopi-k2.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-odroidc2.dtb
arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts new file +557 -0
557 lines not on this page · raw message
Signature · 1 line
2.7.4