Skip to contentSkip to conversation

regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

PATCH In review Kiran Gunda 2 participants 2 messages Oct 4, 2019

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct the voltage selector accordingly.

---
Depends-on: This patch depends on "Add regulator support for SC7180"

 drivers/regulator/qcom-rpmh-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/qcom-rpmh-regulator.c +2 -2
index 8ae7ddf..c86ad40 100644
@@ -735,8 +735,8 @@ static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_bypass_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
-	.n_voltages = 136,
+	.voltage_range = REGULATOR_LINEAR_RANGE(3000000, 0, 31, 32000),
+	.n_voltages = 32,
 	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project
maintainer
#1 lore raw

Applied "regulator: qcom-rpmh: Fix PMIC5 BoB min voltage" to the regulator tree

The patch

regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

has been applied to the regulator tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-5.4

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From 77fd66c9ff3e992718a79fa6407148935d34b50f Mon Sep 17 00:00:00 2001
From: Kiran Gunda <[email protected]>
Date: Fri, 4 Oct 2019 15:46:55 +0530
Subject: [PATCH] regulator: qcom-rpmh: Fix PMIC5 BoB min voltage

Correct the PMIC5 BoB min voltage from 0.3V to 3V. Also correct the voltage selector accordingly.

---
 drivers/regulator/qcom-rpmh-regulator.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/regulator/qcom-rpmh-regulator.c +2 -2
index db6c085da65e..0246b6f99fb5 100644
@@ -735,8 +735,8 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_bypass_ops,
-	.voltage_range = REGULATOR_LINEAR_RANGE(300000, 0, 135, 32000),
-	.n_voltages = 136,
+	.voltage_range = REGULATOR_LINEAR_RANGE(3000000, 0, 31, 32000),
+	.n_voltages = 32,
 	.pmic_mode_map = pmic_mode_map_pmic5_bob,
 	.of_map_mode = rpmh_regulator_pmic4_bob_of_map_mode,
 };
Signature · 1 line
2.20.1