KPC2000: kpc2000_spi.c: Fix alignment and style problems.
PATCH 1/1 KPC2000: kpc2000_spi.c: Fix alignment and style problems.
Fixed alignment and style issues raised by checkpatch.pl
--- drivers/staging/kpc2000/kpc2000_spi.c | 49 ++++++++++++++++++++--------------- 1 file changed, 28 insertions(+), 21 deletions(-)
drivers/staging/kpc2000/kpc2000_spi.c +28 -21
@@ -30,19 +30,27 @@#include "kpc.h" static struct mtd_partition p2kr0_spi0_parts[] = { - { .name ="SLOT_0" , .size =7798784 , .offset =0 , }, - { .name ="SLOT_1" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_2" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_3" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="CS0_EXTRA" , .size =MTDPART_SIZ_FULL , .offset =MTDPART_OFS_NXTBLK }, + { .name ="SLOT_0" , .size =7798784 , .offset =0 ,}, + { .name ="SLOT_1" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="SLOT_2" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="SLOT_3" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="CS0_EXTRA" , .size =MTDPART_SIZ_FULL , .offset = +MTDPART_OFS_NXTBLK }, };static struct mtd_partition p2kr0_spi1_parts[] = { - { .name ="SLOT_4" , .size =7798784 , .offset =0 , }, - { .name ="SLOT_5" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_6" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_7" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="CS1_EXTRA" , .size =MTDPART_SIZ_FULL , .offset =MTDPART_OFS_NXTBLK }, + { .name ="SLOT_4" , .size =7798784 , .offset =0 ,}, + { .name ="SLOT_5" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="SLOT_6" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="SLOT_7" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK }, + { .name ="CS1_EXTRA" , .size =MTDPART_SIZ_FULL , .offset = +MTDPART_OFS_NXTBLK }, };static struct flash_platform_data p2kr0_spi0_pdata = {
@@ -50,6 +58,7 @@ static struct flash_platform_data p2kr0_spi0_pdata = { .nr_parts = ARRAY_SIZE(p2kr0_spi0_parts), .parts = p2kr0_spi0_parts, }; +static struct flash_platform_data p2kr0_spi1_pdata = { .name ="SPI1" , .nr_parts =ARRAY_SIZE (p2kr0_spi1_parts),
@@ -165,7 +174,7 @@ kp_spi_read_reg(struct kp_spi_controller_state *cs, int idx)u64 val; addr += idx; -if ((idx ==KP_SPI_REG_CONFIG ) && (cs->conf_cache >=0 )) +if (idx ==KP_SPI_REG_CONFIG && cs->conf_cache >=0 )return cs->conf_cache; val =readq (addr);
@@ -227,8 +236,7 @@ kp_spi_txrx_pio(struct spi_device *spidev, struct spi_transfer *transfer)kp_spi_write_reg (cs,KP_SPI_REG_TXDATA , val); processed++; } - } -else if (rx) { + }else if (rx) {for (i =0 ; i < c ; i++) {char test =0 ;
@@ -315,19 +323,18 @@ kp_spi_transfer_one_message(struct spi_master *master, struct spi_message *m)if (transfer->speed_hz >KP_SPI_CLK || (len && !(rx_buf || tx_buf))) {dev_dbg (kpspi->dev," transfer: %d Hz, %d %s%s, %d bpw\n" , - transfer->speed_hz, - len, - tx_buf ?"tx" :"" , - rx_buf ?"rx" :"" , - transfer->bits_per_word); + transfer->speed_hz, + len, + tx_buf ?"tx" :"" , + rx_buf ?"rx" :"" , + transfer->bits_per_word);dev_dbg (kpspi->dev," transfer -EINVAL\n" );return -EINVAL ; }if (transfer->speed_hz && transfer->speed_hz < (KP_SPI_CLK >>15 )) {dev_dbg (kpspi->dev,"speed_hz %d below minimum %d Hz\n" , - transfer->speed_hz, -KP_SPI_CLK >>15 ); + transfer->speed_hz,KP_SPI_CLK >>15 );dev_dbg (kpspi->dev," speed_hz -EINVAL\n" );return -EINVAL ; }
@@ -478,7 +485,7 @@ kp_spi_probe(struct platform_device *pldev)/* register the slave boards */ #define NEW_SPI_DEVICE_FROM_BOARD_INFO_TABLE (table) \ for (i = 0 ; i < ARRAY_SIZE(table) ; i++) { \ - spi_new_device(master, &(table[i])); \ + spi_new_device(master, &table[i]); \ }switch ((drvdata->card_id &0xFFFF0000 ) >>16 ) {
Signature · 1 line
2.7.4
Greg KH
maintainerQuoted 1 line · Chandra Annamaneni
Fixed alignment and style issues raised by checkpatch.pl
Why is this padded?
Also, you need to break this up into "one logical change per patch", you can't "fix all style issues" at once, sorry.
Please fix this up and send it as a patch series.
thanks,
greg k-h
Quoted 6 lines · Chandra Annamaneni
drivers/staging/kpc2000/kpc2000_spi.c +0
-0@@ -30,19 +30,27 @@#include "kpc.h"
drivers/staging/kpc2000/kpc2000_spi.c line 35
Quoted 10 lines
drivers/staging/kpc2000/kpc2000_spi.c +3
-5static struct mtd_partition p2kr0_spi0_parts[] = { - { .name ="SLOT_0" , .size =7798784 , .offset =0 , }, - { .name ="SLOT_1" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_2" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="SLOT_3" , .size =7798784 , .offset =MTDPART_OFS_NXTBLK }, - { .name ="CS0_EXTRA" , .size =MTDPART_SIZ_FULL , .offset =MTDPART_OFS_NXTBLK }, + { .name ="SLOT_0" , .size =7798784 , .offset =0 ,}, + { .name ="SLOT_1" , .size =7798784 , .offset = +MTDPART_OFS_NXTBLK },
This looks worse than the original code... :( You could maybe make it a little bit tighter if you used space characters.
{ .name = "SLOT_0", .size = 7798784, .offset = 0, },
{ .name = "SLOT_1", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
{ .name = "SLOT_2", .size = 7798784, .offset = MTDPART_OFS_NXTBLK},
{ .name = "SLOT_3", .size = 7798784, .offset = MTDPART_OFS_NXTBLK}, { .name = "CS0_EXTRA", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_NXTBLK},
It still goes over 80 characters, but that's okay. Or we could just leave the original code as is.
[ snip ]
drivers/staging/kpc2000/kpc2000_spi.c kp_spi_read_reg(struct kp_spi_controller_state *cs, int idx) · line 177
Quoted 9 lines
drivers/staging/kpc2000/kpc2000_spi.c +1
-1static struct flash_platform_data p2kr0_spi1_pdata = { .name ="SPI1" , .nr_parts =ARRAY_SIZE (p2kr0_spi1_parts),@@ -165,7 +174,7 @@ kp_spi_read_reg(struct kp_spi_controller_state *cs, int idx)u64 val; addr += idx; -if ((idx ==KP_SPI_REG_CONFIG ) && (cs->conf_cache >=0 )) +if (idx ==KP_SPI_REG_CONFIG && cs->conf_cache >=0 )
I like these changes but Greg doesn't. So don't bother with this one.
drivers/staging/kpc2000/kpc2000_spi.c kp_spi_read_reg(struct kp_spi_controller_state *cs, int idx) · line 180
Quoted 3 lines
drivers/staging/kpc2000/kpc2000_spi.c +0
-0return cs->conf_cache; val =readq (addr);
The rest of the changes are fine. Split them into multiple patches and resend.
regards,
dan carpenter