shell: Introduce TST_TIMEOUT variable
v5 cover shell: Introduce TST_TIMEOUT variable
Hi,
hopefully the latest version.
Changes v4->v5:
* remove float related code (left from v3)
* remove "tst_test_cmds cut" check from tst_test.sh (there is check for cut and other later => it should be probably removed as well, but as a separate patch) (Cyril)
* remove unneeded IFS from test (Cyril)
* mention ceiling LTP_TIMEOUT_MUL in doc/user-guide.txt
Here is the diff:
user-guide.txt +1 -1
@@ -15,7 +15,7 @@ For running LTP network tests see `testcases/network/README.md`. 'n' or '0': never colorize. | 'LTP_TIMEOUT_MUL' | Multiply timeout, must be number >= 1 (> 1 is useful for slow machines to avoid unexpected timeout). - Variable is also used in shell tests. + Variable is also used in shell tests, but here ceiled to int. | 'PATH' | It's required to addjust path: `PATH="$PATH:$LTPROOT/testcases/bin"` | 'TMPDIR' | Base directory for template directory, which is required by C tests
newlib_tests/shell/test_timeout.sh +0 -2
@@ -15,8 +15,6 @@ echo "Testing timeout in shell API" echo failed=0 -IFS=" -" for i in $DATA; do file=$(echo $i | cut -d'|' -f1) timeout=$(echo $i | cut -d'|' -f2)
lib/tst_test.sh +1 -8
@@ -392,7 +392,6 @@ _tst_setup_timer() tst_is_num "$LTP_TIMEOUT_MUL" || tst_brk TCONF "$err ($LTP_TIMEOUT_MUL)" if ! tst_is_int "$LTP_TIMEOUT_MUL"; then - tst_test_cmds cut LTP_TIMEOUT_MUL=$(echo "$LTP_TIMEOUT_MUL" | cut -d. -f1) LTP_TIMEOUT_MUL=$((LTP_TIMEOUT_MUL+1)) tst_res TINFO "ceiling LTP_TIMEOUT_MUL to $LTP_TIMEOUT_MUL"
@@ -403,13 +402,7 @@ _tst_setup_timer() tst_brk TBROK "TST_TIMEOUT must be int >= 1! ($TST_TIMEOUT)" fi - local sec - if [ "$is_float" ]; then - sec=`echo | awk '{printf("%d\n", '$TST_TIMEOUT' * '$LTP_TIMEOUT_MUL'+ 0.5)}'` - else - sec=$((TST_TIMEOUT * LTP_TIMEOUT_MUL)) - fi - + local sec=$((TST_TIMEOUT * LTP_TIMEOUT_MUL)) local h=$((sec / 3600)) local m=$((sec / 60 % 60)) local s=$((sec % 60))
Petr Vorel (5):
shell: Add tst_is_num()
shell: Introduce TST_TIMEOUT variable, add checks
shell: Add timeout shell API tests memcg_stress_test.sh: use TST_TIMEOUT (replace LTP_TIMEOUT_MUL) net/if-mtu-change.sh: set TST_TIMEOUT
doc/test-writing-guidelines.txt | 14 ++++++-- doc/user-guide.txt | 2 +- lib/newlib_tests/shell/test_timeout.sh | 36 +++++++++++++++++++ lib/newlib_tests/shell/timeout01.sh | 13 +++++++ lib/newlib_tests/shell/timeout02.sh | 13 +++++++ .../memcg/stress/memcg_stress_test.sh | 2 +- testcases/lib/tst_test.sh | 32 +++++++++++++++-- .../network/stress/interface/if-mtu-change.sh | 4 ++- 8 files changed, 108 insertions(+), 8 deletions(-) create mode 100755 lib/newlib_tests/shell/test_timeout.sh create mode 100755 lib/newlib_tests/shell/timeout01.sh create mode 100755 lib/newlib_tests/shell/timeout02.sh
Signature · 1 line
2.23.0
PATCH v5 1/5 shell: Add tst_is_num()
Using grep -E, which more portable than using awk or anything else.
--- doc/test-writing-guidelines.txt | 6 ++++++ testcases/lib/tst_test.sh | 7 ++++++- 2 files changed, 12 insertions(+), 1 deletion(-)
doc/test-writing-guidelines.txt +6 -0
@@ -2338,6 +2338,12 @@ Checking for integers tst_is_int "$FOO" ------------------------------------------------------------------------------- +Checking for integers and floating point numbers +++++++++++++++++++++++++++++++++++++++++++++++++ +# returns zero if passed an integer or floating point number parameter, non-zero otherwise +tst_is_num "$FOO" +------------------------------------------------------------------------------- + Obtaining random numbers ++++++++++++++++++++++++
testcases/lib/tst_test.sh +6 -1
@@ -1,6 +1,6 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later -# Copyright (c) Linux Test Project, 2014-2018 +# Copyright (c) Linux Test Project, 2014-2019 # Author: Cyril Hrubis <[email protected]> # # LTP test library for shell.
@@ -344,6 +344,11 @@ tst_is_int() return $? } +tst_is_num() +{ + echo "$1" | grep -Eq '^[-+]?[0-9]+\.?[0-9]*$' +} + tst_usage() { if [ -n "$TST_USAGE" ]; then
Signature · 1 line
2.23.0
PATCH v5 2/5 shell: Introduce TST_TIMEOUT variable, add checks
In reply to Petr Vorelto unify shell API with C API.
TST_TIMEOUT should be set in tests only, it's equivalent of tst_test->timeout in C API.
Add checks requiring both TST_TIMEOUT and LTP_TIMEOUT_MUL >= 1, that allow to set TST_TIMEOUT lower than the default 300 sec (might be useful for some case).
LTP_TIMEOUT_MUL can be float, but will be ceiled to int. Using float would require awk/bc, which is unnecessary dependency and code complication (we do not care that much if it's multiplied precisely as far as the resulting timeout is never smaller than the precise calculation).
Also added cut dependency to _tst_setup_timer(), but that's not a problem as it was already required for shell API in tst_run().
--- doc/test-writing-guidelines.txt | 8 ++++++-- doc/user-guide.txt | 2 +- testcases/lib/tst_test.sh | 25 +++++++++++++++++++++++-- 3 files changed, 30 insertions(+), 5 deletions(-)
doc/test-writing-guidelines.txt +6 -2
@@ -2109,8 +2109,8 @@ tst_run '$TST_TEST_DATA' can be used with '$TST_CNT'. If '$TST_TEST_DATA_IFS' not specified, space as default value is used. Of course, it's possible to use separate functions. -2.3.2 Library variables -^^^^^^^^^^^^^^^^^^^^^^^ +2.3.2 Library environment variables for shell +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Similarily to the C library various checks and preparations can be requested simply by setting right '$TST_NEEDS_FOO'.
@@ -2126,6 +2126,10 @@ simply by setting right '$TST_NEEDS_FOO'. the test (see below). | 'TST_NEEDS_MODULE' | Test module name needed for the test (see below). | 'TST_NEEDS_DRIVERS'| Checks kernel drivers support for the test. +| 'TST_TIMEOUT' | Maximum timeout set for the test in sec. Must be int >= 1, + or -1 (special value to disable timeout), default is 300. + Variable is meant be set in tests, not by user. + It's equivalent of `tst_test.timeout` in C. |============================================================================= NOTE: Network tests (see testcases/network/README.md) use additional variables
doc/user-guide.txt +1 -1
@@ -15,7 +15,7 @@ For running LTP network tests see `testcases/network/README.md`. 'n' or '0': never colorize. | 'LTP_TIMEOUT_MUL' | Multiply timeout, must be number >= 1 (> 1 is useful for slow machines to avoid unexpected timeout). - Variable is also used in shell tests. + Variable is also used in shell tests, but here ceiled to int. | 'PATH' | It's required to addjust path: `PATH="$PATH:$LTPROOT/testcases/bin"` | 'TMPDIR' | Base directory for template directory, which is required by C tests
testcases/lib/tst_test.sh +23 -2
@@ -379,9 +379,30 @@ _tst_rescmp() _tst_setup_timer() { + TST_TIMEOUT=${TST_TIMEOUT:-300} LTP_TIMEOUT_MUL=${LTP_TIMEOUT_MUL:-1} - local sec=$((300 * LTP_TIMEOUT_MUL)) + if [ "$TST_TIMEOUT" = -1 ]; then + tst_res TINFO "Timeout per run is disabled" + return + fi + + local err="LTP_TIMEOUT_MUL must be number >= 1!" + + tst_is_num "$LTP_TIMEOUT_MUL" || tst_brk TCONF "$err ($LTP_TIMEOUT_MUL)" + + if ! tst_is_int "$LTP_TIMEOUT_MUL"; then + LTP_TIMEOUT_MUL=$(echo "$LTP_TIMEOUT_MUL" | cut -d. -f1) + LTP_TIMEOUT_MUL=$((LTP_TIMEOUT_MUL+1)) + tst_res TINFO "ceiling LTP_TIMEOUT_MUL to $LTP_TIMEOUT_MUL" + fi + [ "$LTP_TIMEOUT_MUL" -ge 1 ] || tst_brk TCONF "$err ($LTP_TIMEOUT_MUL)" + + if ! tst_is_int "$TST_TIMEOUT" || [ "$TST_TIMEOUT" -lt 1 ]; then + tst_brk TBROK "TST_TIMEOUT must be int >= 1! ($TST_TIMEOUT)" + fi + + local sec=$((TST_TIMEOUT * LTP_TIMEOUT_MUL)) local h=$((sec / 3600)) local m=$((sec / 60 % 60)) local s=$((sec % 60))
@@ -418,7 +439,7 @@ tst_run() NEEDS_CMDS|NEEDS_MODULE|MODPATH|DATAROOT);; NEEDS_DRIVERS|FS_TYPE|MNTPOINT|MNT_PARAMS);; IPV6|IPVER|TEST_DATA|TEST_DATA_IFS);; - RETRY_FUNC|RETRY_FN_EXP_BACKOFF);; + RETRY_FUNC|RETRY_FN_EXP_BACKOFF|TIMEOUT);; NET_MAX_PKT);; *) tst_res TWARN "Reserved variable TST_$_tst_i used!";; esac
Signature · 1 line
2.23.0
PATCH v5 3/5 shell: Add timeout shell API tests
In reply to Petr Vorel--- lib/newlib_tests/shell/test_timeout.sh | 36 ++++++++++++++++++++++++++ lib/newlib_tests/shell/timeout01.sh | 13 ++++++++++ lib/newlib_tests/shell/timeout02.sh | 13 ++++++++++ 3 files changed, 62 insertions(+) create mode 100755 lib/newlib_tests/shell/test_timeout.sh create mode 100755 lib/newlib_tests/shell/timeout01.sh create mode 100755 lib/newlib_tests/shell/timeout02.sh
lib/newlib_tests/shell/test_timeout.sh new file +36 -0
@@ -0,0 +1,36 @@ +#!/bin/sh + +PATH="$(dirname $0)/../../../testcases/lib/:$PATH" + +DATA=" +timeout01.sh||0 +timeout02.sh||0 +timeout02.sh|foo|32 +timeout02.sh|2|0 +timeout02.sh|1.1|0 +timeout02.sh|-10|32 +" + +echo "Testing timeout in shell API" +echo + +failed=0 +for i in $DATA; do + file=$(echo $i | cut -d'|' -f1) + timeout=$(echo $i | cut -d'|' -f2) + exp_exit=$(echo $i | cut -d'|' -f3) + + echo "=== $test (LTP_TIMEOUT_MUL='$timeout') ===" + LTP_TIMEOUT_MUL=$timeout ./$file + ret=$? + if [ $ret -ne $exp_exit ]; then + echo "FAILED (exit code: $ret, expected $exp_exit)" + failed=$((failed+1)) + else + echo "PASSED" + fi + echo +done + +echo "Failed tests: $failed" +exit $failed
lib/newlib_tests/shell/timeout01.sh new file +13 -0
@@ -0,0 +1,13 @@ +#!/bin/sh + +TST_TESTFUNC=do_test + +TST_TIMEOUT=-1 +. tst_test.sh + +do_test() +{ + tst_res TPASS "timeout $TST_TIMEOUT set" +} + +tst_run
lib/newlib_tests/shell/timeout02.sh new file +13 -0
@@ -0,0 +1,13 @@ +#!/bin/sh + +TST_TESTFUNC=do_test + +TST_TIMEOUT=2 +. tst_test.sh + +do_test() +{ + tst_res TPASS "timeout $TST_TIMEOUT set (LTP_TIMEOUT_MUL='$LTP_TIMEOUT_MUL')" +} + +tst_run
Signature · 1 line
2.23.0
PATCH v5 3/5 shell: Add timeout shell API tests
Quoted 18 lines · Petr Vorel
Signed-off-by Petr Vorel <[email protected]>--- lib/newlib_tests/shell/test_timeout.sh | 36 ++++++++++++++++++++++++++ lib/newlib_tests/shell/timeout01.sh | 13 ++++++++++ lib/newlib_tests/shell/timeout02.sh | 13 ++++++++++ 3 files changed, 62 insertions(+) create mode 100755 lib/newlib_tests/shell/test_timeout.sh create mode 100755 lib/newlib_tests/shell/timeout01.sh create mode 100755 lib/newlib_tests/shell/timeout02.shlib/newlib_tests/shell/test_timeout.sh new file +0
-0
lib/newlib_tests/shell/test_timeout.sh line 6
Quoted 6 lines
lib/newlib_tests/shell/test_timeout.sh new file +6
-0@@ -0,0 +1,36 @@ +#!/bin/sh + +PATH="$(dirname $0)/../../../testcases/lib/:$PATH" + +DATA=" +timeout01.sh||0
We only check if the lib doesn't produce any error, but we do not check if timeout is really unlimited. But I think we can do so when the shell-test-framework will be introduced and we can check for "TINFO: Timeout per run is disabled" output.
lib/newlib_tests/shell/test_timeout.sh line 11
Quoted 5 lines
lib/newlib_tests/shell/test_timeout.sh new file +5
-0+timeout02.sh||0 +timeout02.sh|foo|32 +timeout02.sh|2|0 +timeout02.sh|1.1|0 +timeout02.sh|-10|32
I think it is worth to add these tests as well:
timeout01.sh|2|0 timeout02.sh|-1.1|32 timeout02.sh|-10.1|32 timeout02.sh|-0.1|0
Quoted 66 lines
lib/newlib_tests/shell/test_timeout.sh new file +25
-0+" + +echo "Testing timeout in shell API" +echo + +failed=0 +for i in $DATA; do + file=$(echo $i | cut -d'|' -f1) + timeout=$(echo $i | cut -d'|' -f2) + exp_exit=$(echo $i | cut -d'|' -f3) + + echo "=== $test (LTP_TIMEOUT_MUL='$timeout') ===" + LTP_TIMEOUT_MUL=$timeout ./$file + ret=$? + if [ $ret -ne $exp_exit ]; then + echo "FAILED (exit code: $ret, expected $exp_exit)" + failed=$((failed+1)) + else + echo "PASSED" + fi + echo +done + +echo "Failed tests: $failed" +exit $failedlib/newlib_tests/shell/timeout01.sh new file +13
-0@@ -0,0 +1,13 @@ +#!/bin/sh + +TST_TESTFUNC=do_test + +TST_TIMEOUT=-1 +. tst_test.sh + +do_test() +{ + tst_res TPASS "timeout $TST_TIMEOUT set" +} + +tst_runlib/newlib_tests/shell/timeout02.sh new file +10
-0@@ -0,0 +1,13 @@ +#!/bin/sh + +TST_TESTFUNC=do_test + +TST_TIMEOUT=2 +. tst_test.sh + +do_test() +{ + tst_res TPASS "timeout $TST_TIMEOUT set(LTP_TIMEOUT_MUL='$LTP_TIMEOUT_MUL')"
lib/newlib_tests/shell/timeout02.sh new file +3
-0+} + +tst_run
PATCH v5 3/5 shell: Add timeout shell API tests
Hi Clements,
thanks for your notes.
Quoted 7 lines
lib/newlib_tests/shell/test_timeout.sh line 6
Quoted 2 lines
lib/newlib_tests/shell/test_timeout.sh new file +2
-0+DATA=" +timeout01.sh||0We only check if the lib doesn't produce any error, but we do not check if timeout is really unlimited. But I think we can do so when the shell-test-framework will be introduced and we can check for "TINFO: Timeout per run is disabled" output.
Yes, I'd prefer to do more enhancements after shell-test-framework being merged.
I plan to add also $(dirname $0) to PATH, so it can be run
-PATH="$(dirname $0)/../../../testcases/lib/:$PATH" +PATH="$(dirname $0):$(dirname $0)/../../../testcases/lib/:$PATH"
...
- LTP_TIMEOUT_MUL=$timeout ./$file
+ LTP_TIMEOUT_MUL=$timeout $file
And expect that shell-test-framework will handle this better.
Quoted 8 lines
lib/newlib_tests/shell/test_timeout.sh line 11
Quoted 5 lines
lib/newlib_tests/shell/test_timeout.sh new file +5
-0+timeout02.sh||0 +timeout02.sh|foo|32 +timeout02.sh|2|0 +timeout02.sh|1.1|0 +timeout02.sh|-10|32I think it is worth to add these tests as well:
Quoted 4 lines
timeout01.sh|2|0 timeout02.sh|-1.1|32 timeout02.sh|-10.1|32 timeout02.sh|-0.1|0
OK, no problem to add them.
timeout02 1 TCONF: LTP_TIMEOUT_MUL must be number >= 1! (0) BTW I wonder if TBROK shouldn't be used instead of TCONF. Anybody strong opinion?
Kind regards,
Petr
PATCH v5 3/5 shell: Add timeout shell API tests
Hi!
Quoted 3 lines
timeout02 1 TCONF:
LTP_TIMEOUT_MULmust be number >= 1! (0) BTW I wonder if TBROK shouldn't be used instead of TCONF. Anybody strong opinion?
If we fail to run a test because user passed wrong input data it has to be TBROK because TCONF can end up unnoticed.
Signature · 2 lines
Cyril Hrubis [email protected]
PATCH v5 3/5 shell: Add timeout shell API tests
Hi,
Quoted 6 lines
Quoted 3 lines
timeout02 1 TCONF:
LTP_TIMEOUT_MULmust be number >= 1! (0) BTW I wonder if TBROK shouldn't be used instead of TCONF. Anybody strong opinion?If we fail to run a test because user passed wrong input data it has to be TBROK because TCONF can end up unnoticed.
+1.
I'd like to merge v5 with following diff:
Please let me know if anything else is problematic.
Kind regards,
Petr
newlib_tests/shell/test_timeout.sh +7 -2
@@ -1,6 +1,6 @@ #!/bin/sh -PATH="$(dirname $0)/../../../testcases/lib/:$PATH" +PATH="$(dirname $0):$(dirname $0)/../../../testcases/lib/:$PATH" DATA=" timeout01.sh||0
@@ -9,6 +9,11 @@ timeout02.sh|foo|32 timeout02.sh|2|0 timeout02.sh|1.1|0 timeout02.sh|-10|32 + +timeout01.sh|2|0 +timeout02.sh|-1.1|32 +timeout02.sh|-10.1|32 +timeout02.sh|-0.1|0 " echo "Testing timeout in shell API"
@@ -21,7 +26,7 @@ for i in $DATA; do exp_exit=$(echo $i | cut -d'|' -f3) echo "=== $test (LTP_TIMEOUT_MUL='$timeout') ===" - LTP_TIMEOUT_MUL=$timeout ./$file + LTP_TIMEOUT_MUL=$timeout $file ret=$? if [ $ret -ne $exp_exit ]; then echo "FAILED (exit code: $ret, expected $exp_exit)"
lib/tst_test.sh +2 -2
@@ -389,14 +389,14 @@ _tst_setup_timer() local err="LTP_TIMEOUT_MUL must be number >= 1!" - tst_is_num "$LTP_TIMEOUT_MUL" || tst_brk TCONF "$err ($LTP_TIMEOUT_MUL)" + tst_is_num "$LTP_TIMEOUT_MUL" || tst_brk TBROK "$err ($LTP_TIMEOUT_MUL)" if ! tst_is_int "$LTP_TIMEOUT_MUL"; then LTP_TIMEOUT_MUL=$(echo "$LTP_TIMEOUT_MUL" | cut -d. -f1) LTP_TIMEOUT_MUL=$((LTP_TIMEOUT_MUL+1)) tst_res TINFO "ceiling LTP_TIMEOUT_MUL to $LTP_TIMEOUT_MUL" fi - [ "$LTP_TIMEOUT_MUL" -ge 1 ] || tst_brk TCONF "$err ($LTP_TIMEOUT_MUL)" + [ "$LTP_TIMEOUT_MUL" -ge 1 ] || tst_brk TBROK "$err ($LTP_TIMEOUT_MUL)" if ! tst_is_int "$TST_TIMEOUT" || [ "$TST_TIMEOUT" -lt 1 ]; then tst_brk TBROK "TST_TIMEOUT must be int >= 1! ($TST_TIMEOUT)"
PATCH v5 3/5 shell: Add timeout shell API tests
Hi!
Fine with me.
Signature · 2 lines
Cyril Hrubis [email protected]
PATCH v5 3/5 shell: Add timeout shell API tests
In reply to Petr VorelQuoted 6 lines · Petr Vorel
Hi,
Quoted 3 lines
Quoted 3 lines
timeout02 1 TCONF:
LTP_TIMEOUT_MULmust be number >= 1! (0) BTW I wonder if TBROK shouldn't be used instead of TCONF. Anybody strong opinion?
Quoted 7 lines
Quoted 2 lines
If we fail to run a test because user passed wrong input data it has to be TBROK because TCONF can end up unnoticed.
+1.
I'd like to merge v5 with following diff:
Please let me know if anything else is problematic.
Thanks for your work Petr!
For patchset:
Signature · 5 lines
Regards, Li Wang -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.linux.it/pipermail/ltp/attachments/20191012/4a38de5d/attachment.htm>
PATCH v5 3/5 shell: Add timeout shell API tests
Hi Li,
Quoted 3 lines
Thanks for your work Petr!
For patchset:Tested-by Li Wang <[email protected]>
I'm sorry, forget to add this tag.
Thanks for testing!
Kind regards,
Petr
PATCH v5 3/5 shell: Add timeout shell API tests
In reply to Petr VorelAck
PATCH v5 3/5 shell: Add timeout shell API tests
Hi,
Quoted 1 line
Ack
Thanks a lot, merged.
Kind regards,
Petr
PATCH v5 4/5 memcg_stress_test.sh: use TST_TIMEOUT (replace LTP_TIMEOUT_MUL)
In reply to Petr Vorelkeeping the same timeout
--- testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
testcases/kernel/controllers/memcg/stress/memcg_stress_test.sh +1 -1
@@ -17,7 +17,7 @@ TST_NEEDS_CMDS="mount umount cat kill mkdir rmdir grep awk cut" # Each test case runs for 900 secs when everything fine # therefore the default 5 mins timeout is not enough. -LTP_TIMEOUT_MUL=7 +TST_TIMEOUT=2100 . cgroup_lib.sh
Signature · 1 line
2.23.0
PATCH v5 5/5 net/if-mtu-change.sh: set TST_TIMEOUT
In reply to Petr VorelThe default setup (100 * 5 seconds just for sleep) is longer than default timeout. 30 sec for each iteration should be more than enough as a default.
--- testcases/network/stress/interface/if-mtu-change.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
testcases/network/stress/interface/if-mtu-change.sh +3 -1
@@ -1,6 +1,6 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0-or-later -# Copyright (c) 2017-2018 Petr Vorel <[email protected]> +# Copyright (c) 2017-2019 Petr Vorel <[email protected]> # Copyright (c) 2015-2017 Oracle and/or its affiliates. All Rights Reserved. # Copyright (c) International Business Machines Corp., 2005 # Author: Mitsuru Chinen <[email protected]>
@@ -13,6 +13,8 @@ TST_CLEANUP="do_cleanup" # The interval of the mtu change [second] CHANGE_INTERVAL=${CHANGE_INTERVAL:-5} +TST_TIMEOUT=$(((CHANGE_INTERVAL + 30) * MTU_CHANGE_TIMES)) + # The array of the value which MTU is changed into sequentially # 552 - net.ipv4.route.min_pmtu CHANGE_VALUES="784 1142 552 1500 552 1500 552 748 552 1142 1500"
Signature · 1 line
2.23.0
v5 cover shell: Introduce TST_TIMEOUT variable
In reply to Petr VorelHi!
Quoted 14 lines
Changes
v4->v5:
* remove float related code (left from v3)
* remove "tst_test_cmdscut" check fromtst_test.sh(there is check for cut and other later => it should be probably removed as well, but as a separate patch) (Cyril)
* remove unneeded IFS from test (Cyril)
* mention ceilingLTP_TIMEOUT_MULindoc/user-guide.txtHere is the diff:
user-guide.txt +0
-0
user-guide.txt For running LTP network tests see `testcases/network/README.md`. · line 18
Quoted 5 lines
user-guide.txt +1
-1@@ -15,7 +15,7 @@ For running LTP network tests see `testcases/network/README.md`. 'n' or '0': never colorize. | 'LTP_TIMEOUT_MUL' | Multiply timeout, must be number >= 1 (> 1 is useful for slow machines to avoid unexpected timeout). - Variable is also used in shell tests. + Variable is also used in shell tests, but here ceiled to int.
^ Drop the "here"
Other than that it's fine, you can add my Reviewed-by:
Signature · 2 lines
Cyril Hrubis [email protected]
v5 cover shell: Introduce TST_TIMEOUT variable
In reply to Petr VorelQuoted 4 lines · Petr Vorel
Hi,
hopefully the latest version.
Quoted 11 lines
Changes
v4->v5:
* remove float related code (left from v3)
* remove "tst_test_cmdscut" check fromtst_test.sh(there is check for
cut and other later => it should be probably removed as well, but as a
separate patch) (Cyril)
* remove unneeded IFS from test (Cyril)
* mention ceilingLTP_TIMEOUT_MULindoc/user-guide.txt
<snip>
For me this patchset looks good. I only add some nit comments on the tests, can be taken or not.
Thanks
Clemens