drm/amd/powerplay: bug fix for memory clock request from display
Subsystems (2)
PATCH 1/1 drm/amd/powerplay: bug fix for memory clock request from display
In some cases, display fixes memory clock frequency to a high value rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset, this causes the bug which makes the memory clock goes into a low value. Then due to the insuffcient memory clock, the screen flicks.
--- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +2 -0
@@ -1354,6 +1354,8 @@ static int smu_resume(void *handle)if (smu->is_apu)smu_set_gfx_cgpg (&adev->smu, true); + smu->disable_uclk_switch =0 ; +mutex_unlock (&smu->mutex);pr_info ("SMU is resumed successfully!\n" );
Signature · 6 lines
2.7.4 _______________________________________________ amd-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/amd-gfx
A message that is not in the archive (sent off-list or not yet received): 1571216302-898-1-git-send-email-kenneth.feng-5C7GfCeVMHo@public.gmane.org
Xiao, Jack
Reviewed-by Jack Xiao-----Original Message-----
From: amd-gfx <[email protected]> On Behalf Of Kenneth Feng
Sent: Wednesday, October 16, 2019 4:58 PM
To: [email protected]
Cc: Feng, Kenneth <[email protected]>
Subject: [PATCH] drm/amd/powerplay: bug fix for memory clock request from display
In some cases, display fixes memory clock frequency to a high value rather than the natural memory clock switching.
When we comes back from s3 resume, the request from display is not reset, this causes the bug which makes the memory clock goes into a low value. Then due to the insuffcient memory clock, the screen flicks.
--- drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c +2 -0
@@ -1354,6 +1354,8 @@ static int smu_resume(void *handle)if (smu->is_apu)smu_set_gfx_cgpg (&adev->smu, true); + smu->disable_uclk_switch =0 ; +mutex_unlock (&smu->mutex);pr_info ("SMU is resumed successfully!\n" );
--
2.7.4
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx
_______________________________________________
amd-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/amd-gfx