arm64: dts: agilex: add QSPI support for Intel Agilex
PATCH v2 1/1 arm64: dts: agilex: add QSPI support for Intel Agilex
This patch adds QSPI flash interface in device tree for Intel Agilex
---
v2: update the qspi_rootfs partition size
--- arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+)
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +35 -0
@@ -73,3 +73,38 @@ &watchdog0 { status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <50000000>; + + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0CB50000>; + }; + }; + }; +};
Signature · 1 line
1.9.1
Quoted 17 lines · Joyce
This patch adds QSPI flash interface in device tree for Intel Agilex
Signed-off-by Ooi, Joyce <[email protected]>---
v2: update theqspi_rootfspartition size
---
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 35
++++++++++++++++++++++1 file changed, 35 insertions(+)arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +0
-0@@ -73,3 +73,38 @@ &watchdog0 {
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts line 83
Quoted 10 lines
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +8
-0status = "okay"; }; + +&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <50000000>;
QSPI can support up to 100MHz.
Quoted 27 lines
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +27
-0+ + m25p,fast-read; + cdns,page-size = <256>; + cdns,block-size = <16>; + cdns,read-delay = <1>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + qspi_boot: partition@0 { + label = "Boot and fpga data"; + reg = <0x0 0x034B0000>; + }; + + qspi_rootfs: partition@34B0000 { + label = "Root Filesystem - JFFS2"; + reg = <0x034B0000 0x0CB50000>; + }; + }; + }; +};
Quoted 21 lines · Ley Foon Tan
Quoted 20 lines · Joyce
This patch adds QSPI flash interface in device tree for Intel Agilex
Signed-off-by Ooi, Joyce <[email protected]>---
v2: update theqspi_rootfspartition size
---
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts | 35
++++++++++++++++++++++1 file changed, 35 insertions(+)arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +1
-0@@ -73,3 +73,38 @@ &watchdog0 { status = "okay"; }; +
Quoted 8 lines
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts line 83
Quoted 7 lines
arch/arm64/boot/dts/intel/socfpga_agilex_socdk.dts +7
-0+&qspi { + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mt25qu02g"; + reg = <0>; + spi-max-frequency = <50000000>;QSPI can support up to 100MHz.
I've updated the patch accordingly.
Dinh