hisi_lpc: Improve build test coverage
Subsystems (2)
v2 cover hisi_lpc: Improve build test coverage
This series aims to improve the build test cover of the driver by supporting building under COMPILE_TEST.
I also included "lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration" as it was never picked up for 5.4.
Two new patches are also included since v1:
- clean issues detected by sparse
- build logic_pio.o into /lib library
John Garry (5):
lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at
registration
logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO
bus: hisi_lpc: Clean some types
bus: hisi_lpc: Expand build test coverage
logic_pio: Build into a library
drivers/bus/Kconfig | 4 ++-- drivers/bus/hisi_lpc.c | 9 ++++----- include/linux/logic_pio.h | 4 ++-- lib/Makefile | 2 +- lib/logic_pio.c | 14 ++++++++------ 5 files changed, 17 insertions(+), 16 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/5 lib: logic_pio: Enforce LOGIC_PIO_INDIRECT region ops are set at registration
Since the only LOGIC_PIO_INDIRECT host (hisi-lpc) now sets the ops prior to registration, enforce this check for accessors ops at registration instead of in the IO port accessors to simplify and marginally optimise the code.
A slight misalignment is also tidied.
Also add myself as an author.
--- lib/logic_pio.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
lib/logic_pio.c +8 -6
@@ -3,6 +3,7 @@* Copyright (C) 2017 HiSilicon Limited, All Rights Reserved. * Author: Gabriele Paoloni <[email protected]> * Author: Zhichang Yuan <[email protected]> +* Author: John Garry <[email protected]> */ #define pr_fmt (fmt) "LOGIC PIO: " fmt
@@ -39,7 +40,8 @@ int logic_pio_register_range(struct logic_pio_hwaddr *new_range)resource_size_t iio_sz =MMIO_UPPER_LIMIT ;int ret =0 ; -if (!new_range || !new_range->fwnode || !new_range->size) +if (!new_range || !new_range->fwnode || !new_range->size || + (new_range->flags ==LOGIC_PIO_INDIRECT && !new_range->ops))return -EINVAL ; start = new_range->hw_start;
@@ -237,7 +239,7 @@ type logic_in##bw(unsigned long addr) \ }else if (addr >=MMIO_UPPER_LIMIT && addr <IO_SPACE_LIMIT ) { \struct logic_pio_hwaddr *entry =find_io_range (addr); \ \ -if (entry && entry->ops) \ +if (entry) \ ret = entry->ops->in (entry->hostdata, \ addr,sizeof (type)); \else \
@@ -253,7 +255,7 @@ void logic_out##bw(type value, unsigned long addr) \ }else if (addr >=MMIO_UPPER_LIMIT && addr <IO_SPACE_LIMIT ) { \struct logic_pio_hwaddr *entry =find_io_range (addr); \ \ -if (entry && entry->ops) \ +if (entry) \ entry->ops->out (entry->hostdata, \ addr, value,sizeof (type)); \else \
@@ -261,7 +263,7 @@ void logic_out##bw(type value, unsigned long addr) \ } \ } \ \ -void logic_ins##bw(unsigned long addr, void *buffer, \ +void logic_ins##bw(unsigned long addr, void *buffer, \ unsigned int count) \ { \ if (addr < MMIO_UPPER_LIMIT) { \
@@ -269,7 +271,7 @@ void logic_ins##bw(unsigned long addr, void *buffer, \ }else if (addr >=MMIO_UPPER_LIMIT && addr <IO_SPACE_LIMIT ) { \struct logic_pio_hwaddr *entry =find_io_range (addr); \ \ -if (entry && entry->ops) \ +if (entry) \ entry->ops->ins (entry->hostdata, \ addr, buffer,sizeof (type), count); \else \
@@ -286,7 +288,7 @@ void logic_outs##bw(unsigned long addr, const void *buffer, \ }else if (addr >=MMIO_UPPER_LIMIT && addr <IO_SPACE_LIMIT ) { \struct logic_pio_hwaddr *entry =find_io_range (addr); \ \ -if (entry && entry->ops) \ +if (entry) \ entry->ops->outs (entry->hostdata, \ addr, buffer,sizeof (type), count); \else \
Signature · 1 line
2.17.1
PATCH v2 2/5 logic_pio: Define PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO
In reply to John GarryWith the goal of expanding the test coverage of the HiSi LPC driver to !ARM64, define a dummy PIO_INDIRECT_SIZE for !CONFIG_INDIRECT_PIO, which is required by the named driver.
--- include/linux/logic_pio.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
include/linux/logic_pio.h +2 -2
@@ -108,10 +108,10 @@ void logic_outsl(unsigned long addr, const void *buffer, unsigned int count);* area by redefining the macro below. */ #define PIO_INDIRECT_SIZE 0x4000 -#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)#else -#define MMIO_UPPER_LIMIT IO_SPACE_LIMIT +#define PIO_INDIRECT_SIZE 0#endif /* CONFIG_INDIRECT_PIO */ +#define MMIO_UPPER_LIMIT (IO_SPACE_LIMIT - PIO_INDIRECT_SIZE)struct logic_pio_hwaddr *find_io_range_by_fwnode (struct fwnode_handle *fwnode); unsigned long logic_pio_trans_hwaddr(struct fwnode_handle *fwnode,
Signature · 1 line
2.17.1
PATCH v2 3/5 bus: hisi_lpc: Clean some types
In reply to John GarrySparse complains of these:drivers/bus/hisi_lpc.c:82:38: warning: incorrect type in argument 1 (different address spaces)drivers/bus/hisi_lpc.c:82:38: expected void const volatile [noderef] <asn:2>*addrdrivers/bus/hisi_lpc.c:82:38: got unsigned char *drivers/bus/hisi_lpc.c:131:35: warning: incorrect type in argument 1 (different address spaces)drivers/bus/hisi_lpc.c:131:35: expected unsigned char *mbasedrivers/bus/hisi_lpc.c:131:35: got void [noderef] <asn:2>*membasedrivers/bus/hisi_lpc.c:186:35: warning: incorrect type in argument 1 (different address spaces)drivers/bus/hisi_lpc.c:186:35: expected unsigned char *mbasedrivers/bus/hisi_lpc.c:186:35: got void [noderef] <asn:2>*membasedrivers/bus/hisi_lpc.c:228:16: warning: cast to restricted __le32 drivers/bus/hisi_lpc.c:251:13: warning: incorrect type in assignment (different base types)drivers/bus/hisi_lpc.c:251:13: expected unsigned int [unsigned] [usertype] valdrivers/bus/hisi_lpc.c:251:13: got restricted __le32 [usertype] <noident>
Clean them up.
--- drivers/bus/hisi_lpc.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
drivers/bus/hisi_lpc.c +4 -5
@@ -74,7 +74,7 @@ struct hisi_lpc_dev {/* About 10us. This is specific for single IO operations, such as inb */ #define LPC_PEROP_WAITCNT 100 -static int wait_lpc_idle (unsigned char *mbase,unsigned int waitcnt) +static int wait_lpc_idle (void __iomem *mbase,unsigned int waitcnt) {u32 status;
@@ -209,7 +209,7 @@ static u32 hisi_lpc_comm_in(void *hostdata, unsigned long pio, size_t dwidth)struct hisi_lpc_dev *lpcdev = hostdata;struct lpc_cycle_para iopara;unsigned long addr; -u32 rd_data =0 ; +__le32 rd_data =0 ;int ret;if (!lpcdev || !dwidth || dwidth >LPC_MAX_DWIDTH )
@@ -244,13 +244,12 @@ static void hisi_lpc_comm_out(void *hostdata, unsigned long pio,struct lpc_cycle_para iopara;const unsigned char *buf;unsigned long addr; +__le32 _val =cpu_to_le32 (val);if (!lpcdev || !dwidth || dwidth >LPC_MAX_DWIDTH )return ; - val =cpu_to_le32 (val); - - buf = (const unsigned char *)&val; + buf = (const unsigned char *)&_val; addr =hisi_lpc_pio_to_addr (lpcdev, pio); iopara.opflags =FG_INCRADDR_LPC ;
Signature · 1 line
2.17.1
PATCH v2 4/5 bus: hisi_lpc: Expand build test coverage
In reply to John GarryCurrently the driver will only ever be built for ARM64 because it selects CONFIG_INDIRECT_PIO, which itself depends on ARM64.
Expand build test coverage for the driver to other architectures by only selecting CONFIG_INDIRECT_PIO for ARM64, when we really want it.
--- drivers/bus/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/bus/Kconfig +2 -2
@@ -41,8 +41,8 @@ config MOXTET config HISILICON_LPC bool "Support for ISA I/O space on HiSilicon Hip06/7" - depends on ARM64 && (ARCH_HISI || COMPILE_TEST) - select INDIRECT_PIO + depends on (ARM64 && ARCH_HISI) || COMPILE_TEST + select INDIRECT_PIO if ARM64 help Driver to enable I/O access to devices attached to the Low Pin Count bus on the HiSilicon Hip06/7 SoC.
Signature · 1 line
2.17.1
kbuild test robot
build botRe: [PATCH v2 4/5] bus: hisi_lpc: Expand build test coverage
I love your patch! Yet something to improve:
Hi John,
I love your patch! Yet something to improve:
[auto build test ERROR on linus/master]
[cannot apply to v5.4-rc5 next-20191031]
[if your patch is applied to the wrong git tree, please drop us a note to help improve the system. BTW, we also suggest to use '--base' option to specify the base tree in git format-patch, please see https://stackoverflow.com/a/37406982]
url: https://github.com/0day-ci/linux/commits/John-Garry/lib-logic_pio-Enforce-LOGIC_PIO_INDIRECT-region-ops-are-set-at-registration/20191030-081925 base: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 23fdb198ae81f47a574296dab5167c5e136a02ba config: parisc-allmodconfig (attached as .config) compiler: hppa-linux-gcc (GCC) 7.4.0
reproduce:
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross
# save the attached .config to linux build tree
GCC_VERSION=7.4.0 make.cross ARCH=parisc
If you fix the issue, kindly add following tag
All errors (new ones prefixed by >>):
drivers//bus/hisi_lpc.c: In function 'hisi_lpc_target_in':
>> drivers//bus/hisi_lpc.c:137:2: error: implicit declaration of function 'readsb'; did you mean 'readb'? [-Werror=implicit-function-declaration]
readsb(lpcdev->membase + LPC_REG_RDATA, buf, opcnt);
^~~~~~
readb
drivers//bus/hisi_lpc.c: In function 'hisi_lpc_target_out':
>> drivers//bus/hisi_lpc.c:180:2: error: implicit declaration of function 'writesb'; did you mean 'writeb'? [-Werror=implicit-function-declaration]
writesb(lpcdev->membase + LPC_REG_WDATA, buf, opcnt);
^~~~~~~
writebcc1: some warnings being treated as errors
vim +137 drivers//bus/hisi_lpc.c
adf38bb0b5956a Zhichang Yuan 2018-03-21 90
adf38bb0b5956a Zhichang Yuan 2018-03-21 91 /*
adf38bb0b5956a Zhichang Yuan 2018-03-21 92 * hisi_lpc_target_in - trigger a series of LPC cycles for read operation
adf38bb0b5956a Zhichang Yuan 2018-03-21 93 * @lpcdev: pointer to hisi lpc device
adf38bb0b5956a Zhichang Yuan 2018-03-21 94 * @para: some parameters used to control the lpc I/O operations
adf38bb0b5956a Zhichang Yuan 2018-03-21 95 * @addr: the lpc I/O target port address
adf38bb0b5956a Zhichang Yuan 2018-03-21 96 * @buf: where the read back data is stored
adf38bb0b5956a Zhichang Yuan 2018-03-21 97 * @opcnt: how many I/O operations required, i.e. data width
adf38bb0b5956a Zhichang Yuan 2018-03-21 98 *
adf38bb0b5956a Zhichang Yuan 2018-03-21 99 * Returns 0 on success, non-zero on fail.
adf38bb0b5956a Zhichang Yuan 2018-03-21 100 */
adf38bb0b5956a Zhichang Yuan 2018-03-21 101 static int hisi_lpc_target_in(struct hisi_lpc_dev *lpcdev,
adf38bb0b5956a Zhichang Yuan 2018-03-21 102 struct lpc_cycle_para *para, unsigned long addr,
adf38bb0b5956a Zhichang Yuan 2018-03-21 103 unsigned char *buf, unsigned long opcnt)
adf38bb0b5956a Zhichang Yuan 2018-03-21 104 {
adf38bb0b5956a Zhichang Yuan 2018-03-21 105 unsigned int cmd_word;
adf38bb0b5956a Zhichang Yuan 2018-03-21 106 unsigned int waitcnt;
adf38bb0b5956a Zhichang Yuan 2018-03-21 107 unsigned long flags;
adf38bb0b5956a Zhichang Yuan 2018-03-21 108 int ret;
adf38bb0b5956a Zhichang Yuan 2018-03-21 109
adf38bb0b5956a Zhichang Yuan 2018-03-21 110 if (!buf || !opcnt || !para || !para->csize || !lpcdev)
adf38bb0b5956a Zhichang Yuan 2018-03-21 111 return -EINVAL;
adf38bb0b5956a Zhichang Yuan 2018-03-21 112
adf38bb0b5956a Zhichang Yuan 2018-03-21 113 cmd_word = 0; /* IO mode, Read */
adf38bb0b5956a Zhichang Yuan 2018-03-21 114 waitcnt = LPC_PEROP_WAITCNT;
adf38bb0b5956a Zhichang Yuan 2018-03-21 115 if (!(para->opflags & FG_INCRADDR_LPC)) {
adf38bb0b5956a Zhichang Yuan 2018-03-21 116 cmd_word |= LPC_REG_CMD_SAMEADDR;
adf38bb0b5956a Zhichang Yuan 2018-03-21 117 waitcnt = LPC_MAX_WAITCNT;
adf38bb0b5956a Zhichang Yuan 2018-03-21 118 }
adf38bb0b5956a Zhichang Yuan 2018-03-21 119
adf38bb0b5956a Zhichang Yuan 2018-03-21 120 /* whole operation must be atomic */
adf38bb0b5956a Zhichang Yuan 2018-03-21 121 spin_lock_irqsave(&lpcdev->cycle_lock, flags);
adf38bb0b5956a Zhichang Yuan 2018-03-21 122
adf38bb0b5956a Zhichang Yuan 2018-03-21 123 writel_relaxed(opcnt, lpcdev->membase + LPC_REG_OP_LEN);
adf38bb0b5956a Zhichang Yuan 2018-03-21 124 writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD);
adf38bb0b5956a Zhichang Yuan 2018-03-21 125 writel_relaxed(addr, lpcdev->membase + LPC_REG_ADDR);
adf38bb0b5956a Zhichang Yuan 2018-03-21 126
adf38bb0b5956a Zhichang Yuan 2018-03-21 127 writel(LPC_REG_STARTUP_SIGNAL_START,
adf38bb0b5956a Zhichang Yuan 2018-03-21 128 lpcdev->membase + LPC_REG_STARTUP_SIGNAL);
adf38bb0b5956a Zhichang Yuan 2018-03-21 129
adf38bb0b5956a Zhichang Yuan 2018-03-21 130 /* whether the operation is finished */
adf38bb0b5956a Zhichang Yuan 2018-03-21 131 ret = wait_lpc_idle(lpcdev->membase, waitcnt);
adf38bb0b5956a Zhichang Yuan 2018-03-21 132 if (ret) {
adf38bb0b5956a Zhichang Yuan 2018-03-21 133 spin_unlock_irqrestore(&lpcdev->cycle_lock, flags);
adf38bb0b5956a Zhichang Yuan 2018-03-21 134 return ret;
adf38bb0b5956a Zhichang Yuan 2018-03-21 135 }
adf38bb0b5956a Zhichang Yuan 2018-03-21 136
adf38bb0b5956a Zhichang Yuan 2018-03-21 @137 readsb(lpcdev->membase + LPC_REG_RDATA, buf, opcnt);
adf38bb0b5956a Zhichang Yuan 2018-03-21 138
adf38bb0b5956a Zhichang Yuan 2018-03-21 139 spin_unlock_irqrestore(&lpcdev->cycle_lock, flags);
adf38bb0b5956a Zhichang Yuan 2018-03-21 140
adf38bb0b5956a Zhichang Yuan 2018-03-21 141 return 0;
adf38bb0b5956a Zhichang Yuan 2018-03-21 142 }
adf38bb0b5956a Zhichang Yuan 2018-03-21 143
adf38bb0b5956a Zhichang Yuan 2018-03-21 144 /*
adf38bb0b5956a Zhichang Yuan 2018-03-21 145 * hisi_lpc_target_out - trigger a series of LPC cycles for write operation
adf38bb0b5956a Zhichang Yuan 2018-03-21 146 * @lpcdev: pointer to hisi lpc device
adf38bb0b5956a Zhichang Yuan 2018-03-21 147 * @para: some parameters used to control the lpc I/O operations
adf38bb0b5956a Zhichang Yuan 2018-03-21 148 * @addr: the lpc I/O target port address
adf38bb0b5956a Zhichang Yuan 2018-03-21 149 * @buf: where the data to be written is stored
adf38bb0b5956a Zhichang Yuan 2018-03-21 150 * @opcnt: how many I/O operations required, i.e. data width
adf38bb0b5956a Zhichang Yuan 2018-03-21 151 *
adf38bb0b5956a Zhichang Yuan 2018-03-21 152 * Returns 0 on success, non-zero on fail.
adf38bb0b5956a Zhichang Yuan 2018-03-21 153 */
adf38bb0b5956a Zhichang Yuan 2018-03-21 154 static int hisi_lpc_target_out(struct hisi_lpc_dev *lpcdev,
adf38bb0b5956a Zhichang Yuan 2018-03-21 155 struct lpc_cycle_para *para, unsigned long addr,
adf38bb0b5956a Zhichang Yuan 2018-03-21 156 const unsigned char *buf, unsigned long opcnt)
adf38bb0b5956a Zhichang Yuan 2018-03-21 157 {
adf38bb0b5956a Zhichang Yuan 2018-03-21 158 unsigned int waitcnt;
adf38bb0b5956a Zhichang Yuan 2018-03-21 159 unsigned long flags;
adf38bb0b5956a Zhichang Yuan 2018-03-21 160 u32 cmd_word;
adf38bb0b5956a Zhichang Yuan 2018-03-21 161 int ret;
adf38bb0b5956a Zhichang Yuan 2018-03-21 162
adf38bb0b5956a Zhichang Yuan 2018-03-21 163 if (!buf || !opcnt || !para || !lpcdev)
adf38bb0b5956a Zhichang Yuan 2018-03-21 164 return -EINVAL;
adf38bb0b5956a Zhichang Yuan 2018-03-21 165
adf38bb0b5956a Zhichang Yuan 2018-03-21 166 /* default is increasing address */
adf38bb0b5956a Zhichang Yuan 2018-03-21 167 cmd_word = LPC_REG_CMD_OP; /* IO mode, write */
adf38bb0b5956a Zhichang Yuan 2018-03-21 168 waitcnt = LPC_PEROP_WAITCNT;
adf38bb0b5956a Zhichang Yuan 2018-03-21 169 if (!(para->opflags & FG_INCRADDR_LPC)) {
adf38bb0b5956a Zhichang Yuan 2018-03-21 170 cmd_word |= LPC_REG_CMD_SAMEADDR;
adf38bb0b5956a Zhichang Yuan 2018-03-21 171 waitcnt = LPC_MAX_WAITCNT;
adf38bb0b5956a Zhichang Yuan 2018-03-21 172 }
adf38bb0b5956a Zhichang Yuan 2018-03-21 173
adf38bb0b5956a Zhichang Yuan 2018-03-21 174 spin_lock_irqsave(&lpcdev->cycle_lock, flags);
adf38bb0b5956a Zhichang Yuan 2018-03-21 175
adf38bb0b5956a Zhichang Yuan 2018-03-21 176 writel_relaxed(opcnt, lpcdev->membase + LPC_REG_OP_LEN);
adf38bb0b5956a Zhichang Yuan 2018-03-21 177 writel_relaxed(cmd_word, lpcdev->membase + LPC_REG_CMD);
adf38bb0b5956a Zhichang Yuan 2018-03-21 178 writel_relaxed(addr, lpcdev->membase + LPC_REG_ADDR);
adf38bb0b5956a Zhichang Yuan 2018-03-21 179
adf38bb0b5956a Zhichang Yuan 2018-03-21 @180 writesb(lpcdev->membase + LPC_REG_WDATA, buf, opcnt);
adf38bb0b5956a Zhichang Yuan 2018-03-21 181
adf38bb0b5956a Zhichang Yuan 2018-03-21 182 writel(LPC_REG_STARTUP_SIGNAL_START,
adf38bb0b5956a Zhichang Yuan 2018-03-21 183 lpcdev->membase + LPC_REG_STARTUP_SIGNAL);
adf38bb0b5956a Zhichang Yuan 2018-03-21 184
adf38bb0b5956a Zhichang Yuan 2018-03-21 185 /* whether the operation is finished */
adf38bb0b5956a Zhichang Yuan 2018-03-21 186 ret = wait_lpc_idle(lpcdev->membase, waitcnt);
adf38bb0b5956a Zhichang Yuan 2018-03-21 187
adf38bb0b5956a Zhichang Yuan 2018-03-21 188 spin_unlock_irqrestore(&lpcdev->cycle_lock, flags);
adf38bb0b5956a Zhichang Yuan 2018-03-21 189
adf38bb0b5956a Zhichang Yuan 2018-03-21 190 return ret;
adf38bb0b5956a Zhichang Yuan 2018-03-21 191 }
adf38bb0b5956a Zhichang Yuan 2018-03-21 192 :::::: The code at line 137 was first introduced by commit
:::::: adf38bb0b5956ab5469acb1ca981a9287c7ad1d8 HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
:::::: TO: Zhichang Yuan <[email protected]> :::::: CC: Bjorn Helgaas <[email protected]>
---
0-DAY kernel test infrastructure Open Source Technology Center
https://lists.01.org/pipermail/kbuild-all Intel Corporation
PATCH v2 5/5 logic_pio: Build into a library
In reply to John GarryObject file logic_pio.o is always built.
Ideally the object file should only be built when required. This is tricky, as that would be for archs which define PCI_IOBASE, but no common config option exists for that.
For now, continue to always build but at least ensure the symbols are not included in the vmlinux when not referenced.
--- lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
lib/Makefile +1 -1
@@ -108,7 +108,7 @@ obj-$(CONFIG_HAS_IOMEM) += iomap_copy.o devres.o obj-$(CONFIG_CHECK_SIGNATURE) += check_signature.o obj-$(CONFIG_DEBUG_LOCKING_API_SELFTESTS) += locking-selftest.o -obj-y += logic_pio.o +lib-y += logic_pio.o obj-$(CONFIG_GENERIC_HWEIGHT) += hweight.o
Signature · 1 line
2.17.1
Quoted 18 lines · John Garry
This series aims to improve the build test cover of the driver by supporting building under
COMPILE_TEST.I also included "lib:
logic_pio: EnforceLOGIC_PIO_INDIRECTregion ops are set at registration" as it was never picked up for 5.4.Two new patches are also included since v1:
- clean issues detected by sparse
- build logic_pio.o into /lib libraryJohn Garry (5):
lib:logic_pio: EnforceLOGIC_PIO_INDIRECTregion ops are set at
registration
logic_pio: DefinePIO_INDIRECT_SIZEfor !CONFIG_INDIRECT_PIO
bus:hisi_lpc: Clean some types
bus:hisi_lpc: Expand build test coverage
logic_pio: Build into a library
Quoted 7 lines
drivers/bus/Kconfig | 4 ++-- drivers/bus/hisi_lpc.c | 9 ++++----- include/linux/logic_pio.h | 4 ++-- lib/Makefile | 2 +- lib/logic_pio.c | 14 ++++++++------ 5 files changed, 17 insertions(+), 16 deletions(-)
Thanks!
Series applied to the hisilicon driver tree.
Best Regards,
Wei