Skip to contentSkip to conversation

msm:disp:dpu1: setup display datapath for SC7180 target

PATCH Superseded Kalyan Thota 1 participant 1 message Nov 20, 2019

Subsystems (3)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/1 msm:disp:dpu1: setup display datapath for SC7180 target

Add changes to setup display datapath on SC7180 target.

Changes in v1:
- Add changes to support ctl_active on SC7180 target.
- While selecting the number of mixers in the topology consider the interface width.

Changes in v2:
- Spawn topology mixer selection into seperate patch (Rob Clark).
- Add co-developed-by tags in the commit msg (Stephen Boyd).

This patch has dependency on the below series

https://patchwork.kernel.org/patch/11253539/

---
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c   | 21 +++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c     |  1 +
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c         | 84 +++++++++++++++++++++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h         | 24 +++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c        | 28 ++++++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h        |  6 ++
 6 files changed, 159 insertions(+), 5 deletions(-)
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c +19 -2
index b9c84fb..8cc8ad12 100644
@@ -280,6 +280,14 @@ static void dpu_encoder_phys_vid_setup_timing_engine(
 	phys_enc->hw_intf->ops.setup_timing_gen(phys_enc->hw_intf,
 			&timing_params, fmt);
 	phys_enc->hw_ctl->ops.setup_intf_cfg(phys_enc->hw_ctl, &intf_cfg);
+
+	/* setup which pp blk will connect to this intf */
+	if (phys_enc->hw_intf->ops.bind_pingpong_blk)
+		phys_enc->hw_intf->ops.bind_pingpong_blk(
+				phys_enc->hw_intf,
+				true,
+				phys_enc->hw_pp->idx);
+
 	spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
 
 	programmable_fetch_config(phys_enc, &timing_params);
@@ -435,6 +443,7 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 {
 	struct dpu_hw_ctl *ctl;
 	u32 flush_mask = 0;
+	u32 intf_flush_mask = 0;
 
 	ctl = phys_enc->hw_ctl;
 
@@ -459,10 +468,18 @@ static void dpu_encoder_phys_vid_enable(struct dpu_encoder_phys *phys_enc)
 	ctl->ops.get_bitmask_intf(ctl, &flush_mask, phys_enc->hw_intf->idx);
 	ctl->ops.update_pending_flush(ctl, flush_mask);
 
+	if (ctl->ops.get_bitmask_active_intf)
+		ctl->ops.get_bitmask_active_intf(ctl, &intf_flush_mask,
+			phys_enc->hw_intf->idx);
+
+	if (ctl->ops.update_pending_intf_flush)
+		ctl->ops.update_pending_intf_flush(ctl, intf_flush_mask);
+
 skip_flush:
 	DPU_DEBUG_VIDENC(phys_enc,
-			 "update pending flush ctl %d flush_mask %x\n",
-			 ctl->idx - CTL_0, flush_mask);
+		"update pending flush ctl %d flush_mask 0%x intf_mask 0x%x\n",
+		ctl->idx - CTL_0, flush_mask, intf_flush_mask);
+
 
 	/* ctl_flush & timing engine enable will be triggered by framework */
 	if (phys_enc->enable_state == DPU_ENC_DISABLED)
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c +1 -0
index 1cf4509..0ee2b6c 100644
@@ -374,6 +374,7 @@
 	{\
 	.name = _name, .id = _id, \
 	.base = _base, .len = 0x280, \
+	.features = BIT(DPU_CTL_ACTIVE_CFG), \
 	.type = _type, \
 	.controller_id = _ctrl_id, \
 	.prog_fetch_lines_worst_case = 24 \
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c +81 -3

136 lines not on this page · raw message

drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.h +24 -0
index d3ae939..1e3973c 100644
@@ -91,6 +91,15 @@ struct dpu_hw_ctl_ops {
 		u32 flushbits);
 
 	/**
+	 * OR in the given flushbits to the cached pending_intf_flush_mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 * @flushbits : module flushmask
+	 */
+	void (*update_pending_intf_flush)(struct dpu_hw_ctl *ctx,
+		u32 flushbits);
+
+	/**
 	 * Write the value of the pending_flush_mask to hardware
 	 * @ctx       : ctl path ctx pointer
 	 */
@@ -130,11 +139,24 @@ struct dpu_hw_ctl_ops {
 	uint32_t (*get_bitmask_mixer)(struct dpu_hw_ctl *ctx,
 		enum dpu_lm blk);
 
+	/**
+	 * Query the value of the intf flush mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 */
 	int (*get_bitmask_intf)(struct dpu_hw_ctl *ctx,
 		u32 *flushbits,
 		enum dpu_intf blk);
 
 	/**
+	 * Query the value of the intf active flush mask
+	 * No effect on hardware
+	 * @ctx       : ctl path ctx pointer
+	 */
+	int (*get_bitmask_active_intf)(struct dpu_hw_ctl *ctx,
+		u32 *flushbits, enum dpu_intf blk);
+
+	/**
 	 * Set all blend stages to disabled
 	 * @ctx       : ctl path ctx pointer
 	 */
@@ -159,6 +181,7 @@ struct dpu_hw_ctl_ops {
  * @mixer_count: number of mixers
  * @mixer_hw_caps: mixer hardware capabilities
  * @pending_flush_mask: storage for pending ctl_flush managed via ops
+ * @pending_intf_flush_mask: pending INTF flush
  * @ops: operation list
  */
 struct dpu_hw_ctl {
@@ -171,6 +194,7 @@ struct dpu_hw_ctl {
 	int mixer_count;
 	const struct dpu_lm_cfg *mixer_hw_caps;
 	u32 pending_flush_mask;
+	u32 pending_intf_flush_mask;
 
 	/* ops */
 	struct dpu_hw_ctl_ops ops;
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c +28 -0
index dcd87cd..eff5e6a 100644
@@ -56,6 +56,8 @@
 #define   INTF_FRAME_COUNT              0x0AC
 #define   INTF_LINE_COUNT               0x0B0
 
+#define   INTF_MUX                      0x25C
+
 static struct dpu_intf_cfg *_intf_offset(enum dpu_intf intf,
 		struct dpu_mdss_cfg *m,
 		void __iomem *addr,
@@ -218,6 +220,30 @@ static void dpu_hw_intf_setup_prg_fetch(
 	DPU_REG_WRITE(c, INTF_CONFIG, fetch_enable);
 }
 
+static void dpu_hw_intf_bind_pingpong_blk(
+		struct dpu_hw_intf *intf,
+		bool enable,
+		const enum dpu_pingpong pp)
+{
+	struct dpu_hw_blk_reg_map *c;
+	u32 mux_cfg;
+
+	if (!intf)
+		return;
+
+	c = &intf->hw;
+
+	mux_cfg = DPU_REG_READ(c, INTF_MUX);
+	mux_cfg &= ~0xf;
+
+	if (enable)
+		mux_cfg |= (pp - PINGPONG_0) & 0x7;
+	else
+		mux_cfg |= 0xf;
+
+	DPU_REG_WRITE(c, INTF_MUX, mux_cfg);
+}
+
 static void dpu_hw_intf_get_status(
 		struct dpu_hw_intf *intf,
 		struct intf_status *s)
@@ -254,6 +280,8 @@ static void _setup_intf_ops(struct dpu_hw_intf_ops *ops,
 	ops->get_status = dpu_hw_intf_get_status;
 	ops->enable_timing = dpu_hw_intf_enable_timing_engine;
 	ops->get_line_count = dpu_hw_intf_get_line_count;
+	if (cap & BIT(DPU_CTL_ACTIVE_CFG))
+		ops->bind_pingpong_blk = dpu_hw_intf_bind_pingpong_blk;
 }
 
 static struct dpu_hw_blk_ops dpu_hw_ops;
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.h +6 -0
index b03acc2..a1e0ef3 100644
@@ -52,6 +52,8 @@ struct intf_status {
  * @ enable_timing: enable/disable timing engine
  * @ get_status: returns if timing engine is enabled or not
  * @ get_line_count: reads current vertical line counter
+ * @bind_pingpong_blk: enable/disable the connection with pingpong which will
+ *                     feed pixels to this interface
  */
 struct dpu_hw_intf_ops {
 	void (*setup_timing_gen)(struct dpu_hw_intf *intf,
@@ -68,6 +70,10 @@ struct dpu_hw_intf_ops {
 			struct intf_status *status);
 
 	u32 (*get_line_count)(struct dpu_hw_intf *intf);
+
+	void (*bind_pingpong_blk)(struct dpu_hw_intf *intf,
+			bool enable,
+			const enum dpu_pingpong pp);
 };
 
 struct dpu_hw_intf {
Signature · 6 lines
1.9.1

_______________________________________________
Freedreno mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/freedreno