Skip to contentSkip to conversation

clk: en7523: Rework clock handling for different clock numbers

PATCH Applied Christian Marangi 2 participants 14 messages Jan 12, 2025 – Jan 13, 2025

Subsystems (2)

v5 of 6 Applied Latest is v6 →

lore
Share & tools
lore
#0 lore raw

PATCH v5 1/4 clk: en7523: Rework clock handling for different clock numbers

Airoha EN7581 SoC have additional clock compared to EN7523 but current driver permits to only support up to EN7523 clock numbers.

To handle this, rework the clock handling and permit to declare the clocks number in match_data and alloca clk_data based on the compatible match_data.

---
Changes v5:
- Set clk_data->num before accessing hws to follow counted_by Changes v4:
- Move to patch 1 (improve bisectability)
Changes v3:
- Rework num_clocks for en7523
Changes v2:
- Add this patch

 drivers/clk/clk-en7523.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)
drivers/clk/clk-en7523.c +8 -6
index 495c0d607c7d..3a4b7ed40af4 100644
@@ -75,6 +75,7 @@ struct en_rst_data {
 };
 
 struct en_clk_soc_data {
+	u32 num_clocks;
 	const struct clk_ops pcie_ops;
 	int (*hw_init)(struct platform_device *pdev,
 		       struct clk_hw_onecell_data *clk_data);
@@ -504,8 +505,6 @@ static void en7523_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 	u32 rate;
 	int i;
 
-	clk_data->num = EN7523_NUM_CLOCKS;
-
 	for (i = 0; i < ARRAY_SIZE(en7523_base_clks); i++) {
 		const struct en_clk_desc *desc = &en7523_base_clks[i];
 		u32 reg = desc->div_reg ? desc->div_reg : desc->base_reg;
@@ -587,8 +586,6 @@ static void en7581_register_clocks(struct device *dev, struct clk_hw_onecell_dat
 
 	hw = en7523_register_pcie_clk(dev, base);
 	clk_data->hws[EN7523_CLK_PCIE] = hw;
-
-	clk_data->num = EN7523_NUM_CLOCKS;
 }
 
 static int en7523_reset_update(struct reset_controller_dev *rcdev,
@@ -702,13 +699,15 @@ static int en7523_clk_probe(struct platform_device *pdev)
 	struct clk_hw_onecell_data *clk_data;
 	int r;
 
+	soc_data = device_get_match_data(&pdev->dev);
+
 	clk_data = devm_kzalloc(&pdev->dev,
-				struct_size(clk_data, hws, EN7523_NUM_CLOCKS),
+				struct_size(clk_data, hws, soc_data->num_clocks),
 				GFP_KERNEL);
 	if (!clk_data)
 		return -ENOMEM;
 
-	soc_data = device_get_match_data(&pdev->dev);
+	clk_data->num = soc_data->num_clocks;
 	r = soc_data->hw_init(pdev, clk_data);
 	if (r)
 		return r;
@@ -717,6 +716,7 @@ static int en7523_clk_probe(struct platform_device *pdev)
 }
 
 static const struct en_clk_soc_data en7523_data = {
+	.num_clocks = ARRAY_SIZE(en7523_base_clks) + 1,
 	.pcie_ops = {
 		.is_enabled = en7523_pci_is_enabled,
 		.prepare = en7523_pci_prepare,
@@ -726,6 +726,8 @@ static const struct en_clk_soc_data en7523_data = {
 };
 
 static const struct en_clk_soc_data en7581_data = {
+	/* We increment num_clocks by 1 to account for additional PCIe clock */
+	.num_clocks = ARRAY_SIZE(en7581_base_clks) + 1,
 	.pcie_ops = {
 		.is_enabled = en7581_pci_is_enabled,
 		.enable = en7581_pci_enable,
Signature · 1 line
2.45.2
#1 lore raw

PATCH v5 2/4 dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v5:
- Add ack tag
Changes v4:
- Move to patch 2 (improves bisectability)
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -2
index 717d23a5e5ae..28e56745ccff 100644
@@ -12,6 +12,4 @@
 #define EN7523_CLK_CRYPTO	6
 #define EN7523_CLK_PCIE		7
 
-#define EN7523_NUM_CLOCKS	8
-
 #endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
Signature · 1 line
2.45.2
maintainer
#3 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

In reply to Christian Marangi

Subject says EN7581....

Quoting Christian Marangi (2025-01-12 05:39:38)

Quoted 22 lines

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v5:
- Add ack tag
Changes v4:
- Move to patch 2 (improves bisectability)
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index 717d23a5e5ae..28e56745ccff 100644

include/dt-bindings/clock/en7523-clk.h line 15

Quoted 4 lines
include/dt-bindings/clock/en7523-clk.h +0 -1
@@ -12,6 +12,4 @@
 #define EN7523_CLK_CRYPTO      6
 #define EN7523_CLK_PCIE                7
 
-#define EN7523_NUM_CLOCKS      8

But this is EN7523

drivers/clk/clk-en7523.c:539:25: error: ‘EN7523_NUM_CLOCKS’ undeclared (first use in this function)

  539 |         clk_data->num = EN7523_NUM_CLOCKS;
      |                         ^~~~~~~~~~~~~~~~~
#4 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 28 lines · Stephen Boyd

Subject says EN7581....

Quoting Christian Marangi (2025-01-12 05:39:38)

Quoted 25 lines

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v5:
- Add ack tag
Changes v4:
- Move to patch 2 (improves bisectability)
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index 717d23a5e5ae..28e56745ccff 100644
@@ -12,6 +12,4 @@
 #define EN7523_CLK_CRYPTO      6
 #define EN7523_CLK_PCIE                7
 
Quoted 7 lines

include/dt-bindings/clock/en7523-clk.h line 15

Quoted 1 line
include/dt-bindings/clock/en7523-clk.h +0 -1
-#define EN7523_NUM_CLOCKS      8

But this is EN7523

drivers/clk/clk-en7523.c:539:25: error: ‘EN7523_NUM_CLOCKS’ undeclared (first use in this function)

  539 |         clk_data->num = EN7523_NUM_CLOCKS;
      |                         ^~~~~~~~~~~~~~~~~

Hi Stephen,

the same define is used for both EN7523 and EN7581, do you want me to resubmit with a better description?

Both clock are updated so no regression.

Signature · 1 line
	Ansuel
maintainer
#5 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoting Christian Marangi (2025-01-13 13:37:56)

Quoted 37 lines · Stephen Boyd
Quoted 28 lines

Subject says EN7581....

Quoting Christian Marangi (2025-01-12 05:39:38)

Quoted 25 lines

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v5:
- Add ack tag
Changes v4:
- Move to patch 2 (improves bisectability)
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index 717d23a5e5ae..28e56745ccff 100644
@@ -12,6 +12,4 @@
 #define EN7523_CLK_CRYPTO      6
 #define EN7523_CLK_PCIE                7
 
Quoted 7 lines

include/dt-bindings/clock/en7523-clk.h line 15

Quoted 1 line
include/dt-bindings/clock/en7523-clk.h +0 -1
-#define EN7523_NUM_CLOCKS      8

But this is EN7523

drivers/clk/clk-en7523.c:539:25: error: ‘EN7523_NUM_CLOCKS’ undeclared (first use in this function)

  539 |         clk_data->num = EN7523_NUM_CLOCKS;
      |                         ^~~~~~~~~~~~~~~~~
Quoted 7 lines

Hi Stephen,

the same define is used for both EN7523 and EN7581, do you want me to resubmit with a better description?

Both clock are updated so no regression.

Please resubmit the entire patchset. It doesn't compile.

#6 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 40 lines · Stephen Boyd

Quoting Christian Marangi (2025-01-13 13:37:56)

Quoted 39 lines · Stephen Boyd
Quoted 28 lines

Subject says EN7581....

Quoting Christian Marangi (2025-01-12 05:39:38)

Quoted 25 lines

Drop NUM_CLOCKS define for EN7581 include. This is not a binding and should not be placed here. Value is derived internally in the user driver.

---
Changes v5:
- Add ack tag
Changes v4:
- Move to patch 2 (improves bisectability)
Changes v3:
- Add this patch

 include/dt-bindings/clock/en7523-clk.h | 2 --
 1 file changed, 2 deletions(-)
include/dt-bindings/clock/en7523-clk.h +0 -0
index 717d23a5e5ae..28e56745ccff 100644
@@ -12,6 +12,4 @@
 #define EN7523_CLK_CRYPTO      6
 #define EN7523_CLK_PCIE                7
 
Quoted 7 lines

include/dt-bindings/clock/en7523-clk.h line 15

Quoted 1 line
include/dt-bindings/clock/en7523-clk.h +0 -1
-#define EN7523_NUM_CLOCKS      8

But this is EN7523

drivers/clk/clk-en7523.c:539:25: error: ‘EN7523_NUM_CLOCKS’ undeclared (first use in this function)

  539 |         clk_data->num = EN7523_NUM_CLOCKS;
      |                         ^~~~~~~~~~~~~~~~~

Hi Stephen,

Quoted 7 lines
Quoted 5 lines

the same define is used for both EN7523 and EN7581, do you want me to resubmit with a better description?

Both clock are updated so no regression.

Please resubmit the entire patchset. It doesn't compile.

Hope I don't get annoying and sorry for this extra mail.

I can't repro the compile error, it seems patch 1 of this series wasn't applied and changes were tested only with patch 2?

Patch 2 depends on patch 1 as we drop the define.

Signature · 1 line
	Ansuel
maintainer
#7 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoting Christian Marangi (2025-01-13 14:17:49)

Quoted 5 lines · Stephen Boyd
Quoted 2 lines

Please resubmit the entire patchset. It doesn't compile.

Hope I don't get annoying and sorry for this extra mail.

No worries.

Quoted 6 lines

I can't repro the compile error, it seems patch 1 of this series wasn't applied and changes were tested only with patch 2?

Patch 2 depends on patch 1 as we drop the define.

I applied the first patch, but on top of v6.13-rc1 like all other patches that don't tell me their base.

What's the base of the patch series? Please resend with a cover letter and use --base=<commitish> when formatting the patch series. When I applied the first patch I got this diffstat

 drivers/clk/clk-en7523.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

so I suspect I'm missing something in clk-fixes for this patch series. Please call out dependencies in the cover letter.

#8 lore raw

Re: [PATCH v5 2/4] dt-bindings: clock: drop NUM_CLOCKS define for EN7581

Quoted 23 lines · Stephen Boyd

Quoting Christian Marangi (2025-01-13 14:17:49)

Quoted 5 lines · Stephen Boyd
Quoted 2 lines

Please resubmit the entire patchset. It doesn't compile.

Hope I don't get annoying and sorry for this extra mail.

No worries.

Quoted 6 lines

I can't repro the compile error, it seems patch 1 of this series wasn't applied and changes were tested only with patch 2?

Patch 2 depends on patch 1 as we drop the define.

I applied the first patch, but on top of v6.13-rc1 like all other patches that don't tell me their base.

What's the base of the patch series? Please resend with a cover letter and use --base=<commitish> when formatting the patch series. When I applied the first patch I got this diffstat

Quoted 5 lines
 drivers/clk/clk-en7523.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)

so I suspect I'm missing something in clk-fixes for this patch series. Please call out dependencies in the cover letter.

Indeed v6.13-rc1 didn't had the counted_by fix. I referenced the clk-next base branch and sent v6 with the cover letter. Hope it's clear now.

Signature · 1 line
	Ansuel
#9 lore raw

PATCH v5 3/4 dt-bindings: clock: add ID for eMMC for EN7581

In reply to Christian Marangi

Add ID for eMMC for EN7581. This is to control clock selection of eMMC between 200MHz and 150MHz.

---
Changes v4:
- Move to patch 3
Changes v3:
- Add ack tag
Changes v2:
- Drop additional define for EN7581_NUM_CLOCKS

 include/dt-bindings/clock/en7523-clk.h | 2 ++
 1 file changed, 2 insertions(+)
include/dt-bindings/clock/en7523-clk.h +2 -0
index 28e56745ccff..edfa64045f52 100644
@@ -12,4 +12,6 @@
 #define EN7523_CLK_CRYPTO	6
 #define EN7523_CLK_PCIE		7
 
+#define EN7581_CLK_EMMC		8
+
 #endif /* _DT_BINDINGS_CLOCK_AIROHA_EN7523_H_ */
Signature · 1 line
2.45.2
#11 lore raw

PATCH v5 4/4 clk: en7523: Add clock for eMMC for EN7581

In reply to Christian Marangi

Add clock for eMMC for EN7581. This is used to give info of the current eMMC source clock and to switch it from 200MHz or 150MHz.

---
Changes v4:
- Move to patch 4
Changes v2:
- Rename emmc_base to emmc7581_base to make it more clear

 drivers/clk/clk-en7523.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
drivers/clk/clk-en7523.c +10 -0
index 3a4b7ed40af4..6a763bc9ac1a 100644
@@ -91,6 +91,7 @@ static const u32 emi7581_base[] = { 540000000, 480000000, 400000000, 300000000 }
 static const u32 bus7581_base[] = { 600000000, 540000000 };
 static const u32 npu7581_base[] = { 800000000, 750000000, 720000000, 600000000 };
 static const u32 crypto_base[] = { 540000000, 480000000 };
+static const u32 emmc7581_base[] = { 200000000, 150000000 };
 
 static const struct en_clk_desc en7523_base_clks[] = {
 	{
@@ -281,6 +282,15 @@ static const struct en_clk_desc en7581_base_clks[] = {
 		.base_shift = 0,
 		.base_values = crypto_base,
 		.n_base_values = ARRAY_SIZE(crypto_base),
+	}, {
+		.id = EN7581_CLK_EMMC,
+		.name = "emmc",
+
+		.base_reg = REG_CRYPTO_CLKSRC2,
+		.base_bits = 1,
+		.base_shift = 12,
+		.base_values = emmc7581_base,
+		.n_base_values = ARRAY_SIZE(emmc7581_base),
 	}
 };
 
Signature · 1 line
2.45.2
maintainer Applied
#12 lore raw

Re: [PATCH v5 4/4] clk: en7523: Add clock for eMMC for EN7581

Quoting Christian Marangi (2025-01-12 05:39:40)

Quoted 5 lines

Add clock for eMMC for EN7581. This is used to give info of the current eMMC source clock and to switch it from 200MHz or 150MHz.

---

Applied to clk-next

maintainer Applied
#13 lore raw
In reply to Christian Marangi

Quoting Christian Marangi (2025-01-12 05:39:37)

Quoted 9 lines

Airoha EN7581 SoC have additional clock compared to EN7523 but current driver permits to only support up to EN7523 clock numbers.

To handle this, rework the clock handling and permit to declare the clocks number in match_data and alloca clk_data based on the compatible match_data.

---

Applied to clk-next