Skip to contentSkip to conversation

pinctrl: Fix Kconfig indentation

PATCH Superseded Krzysztof Kozlowski 2 participants 2 messages Nov 21, 2019

Subsystems (7)
Arm Qualcomm mailing list GPIO Pin control Arm/Marvell Kirkwood and Armada 370, 375, 38x, 39x, XP, 3700, 7K/8K, CN9130 SoC support +3 more subsystems

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore

Krzysztof Kozlowski

author
#0 lore raw

PATCH v2 1/1 pinctrl: Fix Kconfig indentation

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:

	$ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by Krzysztof Kozlowski <[email protected]>

---

Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.

---
 drivers/pinctrl/Kconfig           | 18 ++++----
 drivers/pinctrl/freescale/Kconfig | 12 ++---
 drivers/pinctrl/mvebu/Kconfig     | 10 ++---
 drivers/pinctrl/qcom/Kconfig      | 92 +++++++++++++++++++--------------------
 4 files changed, 66 insertions(+), 66 deletions(-)
drivers/pinctrl/Kconfig +9 -9
index b372419d61f2..25b6c830f2f1 100644
@@ -32,15 +32,15 @@ config DEBUG_PINCTRL
 	  Say Y here to add some extra checks and diagnostics to PINCTRL calls.
 
 config PINCTRL_ARTPEC6
-        bool "Axis ARTPEC-6 pin controller driver"
-        depends on MACH_ARTPEC6
-        select PINMUX
-        select GENERIC_PINCONF
-        help
-          This is the driver for the Axis ARTPEC-6 pin controller. This driver
-          supports pin function multiplexing as well as pin bias and drive
-          strength configuration. Device tree integration instructions can be
-          found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
+	bool "Axis ARTPEC-6 pin controller driver"
+	depends on MACH_ARTPEC6
+	select PINMUX
+	select GENERIC_PINCONF
+	help
+	  This is the driver for the Axis ARTPEC-6 pin controller. This driver
+	  supports pin function multiplexing as well as pin bias and drive
+	  strength configuration. Device tree integration instructions can be
+	  found in Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
 
 config PINCTRL_AS3722
 	tristate "Pinctrl and GPIO driver for ams AS3722 PMIC"
drivers/pinctrl/freescale/Kconfig +6 -6
index 5f4058033ec6..3ea9ce3e0cd9 100644
@@ -39,12 +39,12 @@ config PINCTRL_IMX27
 
 
 config PINCTRL_IMX25
-        bool "IMX25 pinctrl driver"
-        depends on OF
-        depends on SOC_IMX25
-        select PINCTRL_IMX
-        help
-          Say Y here to enable the imx25 pinctrl driver
+	bool "IMX25 pinctrl driver"
+	depends on OF
+	depends on SOC_IMX25
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the imx25 pinctrl driver
 
 config PINCTRL_IMX35
 	bool "IMX35 pinctrl driver"
drivers/pinctrl/mvebu/Kconfig +5 -5
index d69c25798871..0d12894d3ee1 100644
@@ -46,8 +46,8 @@ config PINCTRL_ORION
 	select PINCTRL_MVEBU
 
 config PINCTRL_ARMADA_37XX
-       bool
-       select GENERIC_PINCONF
-       select MFD_SYSCON
-       select PINCONF
-       select PINMUX
+	bool
+	select GENERIC_PINCONF
+	select MFD_SYSCON
+	select PINCONF
+	select PINMUX
drivers/pinctrl/qcom/Kconfig +46 -46

109 lines not on this page · raw message

Signature · 1 line
2.7.4
#1 lore raw
Quoted 10 lines · Krzysztof Kozlowski

Adjust indentation from spaces to tab (+optional two spaces) as in coding style with command like:

        $ sed -e 's/^        /\t/' -i */Kconfig
Signed-off-by Krzysztof Kozlowski <[email protected]>

---

Changes since v1:
1. Fix also 7-space and tab+1 space indentation issues.

Patch applied, why not.

If it causes severe merge conflicts with other trees (I don't know at this point) then I might have to take it out again, so keep fingers crossed.

Yours,
Linus Walleij