Skip to contentSkip to conversation

dm: serial: Handle "stdout-path" with ":options" correctly

PATCH RESEND Superseded Bin Meng 2 participants 4 messages Nov 25, 2019 – Dec 2, 2019

lore
Share & tools
lore

Bin Meng

author
#0 lore raw

PATCH RESEND v2 1/1 dm: serial: Handle "stdout-path" with ":options" correctly

With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade.

From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things.

This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly.

[1]: http://patchwork.ozlabs.org/patch/462756/

---

Changes in v2:
- initialize node with -1 at the beginning of serial_check_stdout() for better readability

 drivers/serial/serial-uclass.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)
drivers/serial/serial-uclass.c +19 -17
index dcdaede..0f5f1fa 100644
@@ -29,29 +29,31 @@ static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE;
 #if CONFIG_IS_ENABLED(SERIAL_PRESENT)
 static int serial_check_stdout(const void *blob, struct udevice **devp)
 {
-	int node;
+	int node = -1;
+	const char *str, *p, *name;
+	int namelen;
 
 	/* Check for a chosen console */
-	node = fdtdec_get_chosen_node(blob, "stdout-path");
-	if (node < 0) {
-		const char *str, *p, *name;
-
-		/*
-		 * Deal with things like
-		 *	stdout-path = "serial0:115200n8";
-		 *
-		 * We need to look up the alias and then follow it to the
-		 * correct node.
-		 */
-		str = fdtdec_get_chosen_prop(blob, "stdout-path");
-		if (str) {
-			p = strchr(str, ':');
-			name = fdt_get_alias_namelen(blob, str,
-					p ? p - str : strlen(str));
+	str = fdtdec_get_chosen_prop(blob, "stdout-path");
+	if (str) {
+		p = strchr(str, ':');
+		namelen = p ? p - str : strlen(str);
+		node = fdt_path_offset_namelen(blob, str, namelen);
+
+		if (node < 0) {
+			/*
+			 * Deal with things like
+			 *	stdout-path = "serial0:115200n8";
+			 *
+			 * We need to look up the alias and then follow it to
+			 * the correct node.
+			 */
+			name = fdt_get_alias_namelen(blob, str, namelen);
 			if (name)
 				node = fdt_path_offset(blob, name);
 		}
 	}
+
 	if (node < 0)
 		node = fdt_path_offset(blob, "console");
 	if (!uclass_get_device_by_of_offset(UCLASS_SERIAL, node, devp))
Signature · 1 line
2.7.4
author
#1 lore raw

PATCH RESEND v2 1/1 dm: serial: Handle "stdout-path" with ":options" correctly

Hi Simon,

Quoted 24 lines · Bin Meng

With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade.

From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things.

This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly.

[1]: http://patchwork.ozlabs.org/patch/462756/

Quoted 9 lines

---

Changes in v2:
- initialize node with -1 at the beginning of serial_check_stdout() for better readability

 drivers/serial/serial-uclass.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

Could you pull this for v2020.01 as it is a critical fix to make SiFive FU540 board boot again?

Regards,
Bin

#2 lore raw

PATCH RESEND v2 1/1 dm: serial: Handle "stdout-path" with ":options" correctly

HI BIn,

Quoted 34 lines · Bin Meng

Hi Simon,

Quoted 30 lines · Bin Meng

With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade.

From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things.

This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly.

[1]: http://patchwork.ozlabs.org/patch/462756/

---

Changes in v2:
- initialize node with -1 at the beginning of serial_check_stdout() for better readability

Quoted 6 lines
Quoted 3 lines
 drivers/serial/serial-uclass.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

Could you pull this for v2020.01 as it is a critical fix to make SiFive FU540 board boot again?

Yes will do. I see Tom has assigned it to me.

Regards,
Simon

#3 lore raw

PATCH RESEND v2 1/1 dm: serial: Handle "stdout-path" with ":options" correctly

Quoted 38 lines · Simon Glass

HI BIn,

Quoted 34 lines · Bin Meng

Hi Simon,

Quoted 30 lines · Bin Meng

With commit f0921f5098d8 ("fdt: Sync up to the latest libfdt"), SiFive Unleashed board does not boot any more. This was due to the U-Boot local changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") to libfdt/fdt_ro.c was dropped during the libfdt upgrade.

From the history [1] it was mentioned that the U-Boot changes commit 77d7fff8cec2 ("fdt: Fix handling of paths with options in them") was rejected by libfdt upstream, hence we need find another way to fix the things.

This commit uses another method, by updating serial_check_stdout() directly to handle the situation of "stdout-path" with ":options". A simpler way is to change the logic in fdtdec_get_chosen_node() to do similar thing, but I feel that not every property in chosen node may have the option in them, hence it would make more sense to do the special handling in serial_check_stdout() directly.

[1]: http://patchwork.ozlabs.org/patch/462756/

---

Changes in v2:
- initialize node with -1 at the beginning of serial_check_stdout() for better readability

Quoted 8 lines
Quoted 6 lines
Quoted 3 lines
 drivers/serial/serial-uclass.c | 36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

Could you pull this for v2020.01 as it is a critical fix to make SiFive FU540 board boot again?

Yes will do. I see Tom has assigned it to me.

Applied to u-boot-dm, thanks!