arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
Subsystems (2)
PATCH 1/1 arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
add gpio irq to support interrupt trigger mode.
---
hi,
this patch depends of
https://lkml.org/lkml/2019/12/4/644
Guillaume
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 2 ++ 1 file changed, 2 insertions(+)
arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +2 -0
@@ -591,6 +591,8 @@ bluetooth { compatible = "brcm,bcm43438-bt"; + interrupt-parent = <&gpio_intc>; + interrupts = <95 IRQ_TYPE_LEVEL_HIGH>; shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; max-speed = <2000000>; clocks = <&wifi32k>;
Signature · 1 line
2.17.1
Kevin Hilman
maintainerQuoted 8 lines · Guillaume La Roque
add gpio irq to support interrupt trigger mode.
Signed-off-by Guillaume La Roque <[email protected]>---
hi,this patch depends of
https://lkml.org/lkml/2019/12/4/644
Just to be clear on the dependency... This DT patch will not change any behavior until the driver patch is merged, correct?
But if this DT patch merges before the driver patch merges, we're not going to break anything, right? We're just going to (continue) to not have working interrupts.
Kevin
This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Hello:
This patch was applied to khilman/linux-amlogic.git (refs/heads/for-next).
Quoted 10 lines · On Thu, 5 Dec 2019 14:19:00 +0100 you wrote:
add gpio irq to support interrupt trigger mode.
Signed-off-by Guillaume La Roque <[email protected]>---
hi,this patch depends of
https://lkml.org/lkml/2019/12/4/644[...]
Here is a summary with links:
- arm64: dts: meson-sm1-sei610: add gpio bluetooth interrupt
https://git.kernel.org/khilman/linux-amlogic/c/30388cc075720aa0af4f2cb5933afa1f8f39d313
You are awesome, thank you!
Signature · 7 lines
Deet-doot-dot, I am a bot. https://korg.wiki.kernel.org/userdoc/pwbot _______________________________________________ linux-amlogic mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-amlogic