FAILED: patch "[PATCH] omap: pdata-quirks: remove openpandora quirks for mmc3 and" failed to apply to 4.9-stable tree
Subsystems (4)
[email protected]
maintainerThe patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 2398c41d64321e62af54424fd399964f3d48cdc2 Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <[email protected]>
Date: Thu, 7 Nov 2019 11:30:39 +0100
Subject: [PATCH] omap: pdata-quirks: remove openpandora quirks for mmc3 and
wl1251
With a wl1251 child node of mmc3 in the device tree decoded in omap_hsmmc.c to handle special wl1251 initialization, we do no longer need to instantiate the mmc3 through pdata quirks.
We also can remove the wlan regulator and reset/interrupt definitions and do them through device tree.
arch/arm/mach-omap2/pdata-quirks.c +0 -93
@@ -310,108 +310,15 @@ static void __init omap3_logicpd_torpedo_init(void) }/* omap3pandora legacy devices */ -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23static struct platform_device pandora_backlight = { .name ="pandora-backlight" , .id =-1 , }; -static struct regulator_consumer_supply pandora_vmmc3_supply[] = { -REGULATOR_SUPPLY ("vmmc" ,"omap_hsmmc.2" ), -}; - -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask =REGULATOR_CHANGE_STATUS , - }, - .num_consumer_supplies =ARRAY_SIZE (pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name ="vwlan" , - .microvolts =1800000 ,/* 1.8V */ - .gpio =PANDORA_WIFI_NRESET_GPIO , - .startup_delay =50000 ,/* 50ms */ - .enable_high =1 , - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name ="reg-fixed-voltage" , - .id =1 , - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static void pandora_wl1251_init_card (struct mmc_card *card) -{ -/* -* We have TI wl1251 attached to MMC3. Pass this information to -* SDIO core because it can't be probed by normal methods. -*/ -if (card->type ==MMC_TYPE_SDIO || card->type ==MMC_TYPE_SD_COMBO ) { - card->quirks |=MMC_QUIRK_NONSTD_SDIO ; - card->cccr.wide_bus =1 ; - card->cis.vendor =0x104c ; - card->cis.device =0x9066 ; - card->cis.blksize =512 ; - card->cis.max_dtr =24000000 ; - card->ocr =0x80 ; - } -} - -static struct omap2_hsmmc_info pandora_mmc3[] = { - { - .mmc =3 , - .caps =MMC_CAP_4_BIT_DATA |MMC_CAP_POWER_OFF_CARD , - .gpio_cd = -EINVAL , - .gpio_wp = -EINVAL , - .init_card = pandora_wl1251_init_card, - }, - {}/* Terminator */ -}; - -static void __init pandora_wl1251_init (void ) -{ -struct wl1251_platform_data pandora_wl1251_pdata; -int ret; - -memset (&pandora_wl1251_pdata,0 ,sizeof (pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio =-1 ; - - ret =gpio_request_one (PANDORA_WIFI_IRQ_GPIO ,GPIOF_IN ,"wl1251 irq" ); -if (ret <0 ) - goto fail; - - pandora_wl1251_pdata.irq =gpio_to_irq (PANDORA_WIFI_IRQ_GPIO ); -if (pandora_wl1251_pdata.irq <0 ) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret =wl1251_set_platform_data (&pandora_wl1251_pdata); -if (ret <0 ) - goto fail_irq; - -return ; - -fail_irq: -gpio_free (PANDORA_WIFI_IRQ_GPIO ); -fail: -pr_err ("wl1251 board initialisation failed\n" ); -} -static void __init omap3_pandora_legacy_init (void ) {platform_device_register (&pandora_backlight); -platform_device_register (&pandora_vwlan_device); -omap_hsmmc_init (pandora_mmc3); -omap_hsmmc_late_init (pandora_mmc3); -pandora_wl1251_init (); }#endif /* CONFIG_ARCH_OMAP3 */
Please apply this before: https://patchwork.kernel.org/patch/11232473/
Quoted 147 lines
Am 15.12.2019 um 14:32 schrieb [email protected]:
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to <[email protected]>.thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From
2398c41d64321e62af54424fd399964f3d48cdc2Mon Sep 17 00:00:00 2001
From: "H. Nikolaus Schaller" <[email protected]>
Date: Thu, 7 Nov 2019 11:30:39 +0100
Subject: [PATCH] omap: pdata-quirks: remove openpandora quirks for mmc3 and wl1251With a wl1251 child node of mmc3 in the device tree decoded in
omap_hsmmc.cto handle special wl1251 initialization, we do no longer need to instantiate the mmc3 through pdata quirks.We also can remove the wlan regulator and reset/interrupt definitions and do them through device tree.
Fixes 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")Signed-off-by H. Nikolaus Schaller <[email protected]>Cc <[email protected]> # v4.7+Acked-by Tony Lindgren <[email protected]>Signed-off-by Ulf Hansson <[email protected]>arch/arm/mach-omap2/pdata-quirks.c +0
-93@@ -310,108 +310,15 @@ static void __init omap3_logicpd_torpedo_init(void) }/* omap3pandora legacy devices */ -#define PANDORA_WIFI_IRQ_GPIO 21 -#define PANDORA_WIFI_NRESET_GPIO 23static struct platform_device pandora_backlight = { .name ="pandora-backlight" , .id =-1 , }; -static struct regulator_consumer_supply pandora_vmmc3_supply[] = { -REGULATOR_SUPPLY ("vmmc" ,"omap_hsmmc.2" ), -}; - -static struct regulator_init_data pandora_vmmc3 = { - .constraints = { - .valid_ops_mask =REGULATOR_CHANGE_STATUS , - }, - .num_consumer_supplies =ARRAY_SIZE (pandora_vmmc3_supply), - .consumer_supplies = pandora_vmmc3_supply, -}; - -static struct fixed_voltage_config pandora_vwlan = { - .supply_name ="vwlan" , - .microvolts =1800000 ,/* 1.8V */ - .gpio =PANDORA_WIFI_NRESET_GPIO , - .startup_delay =50000 ,/* 50ms */ - .enable_high =1 , - .init_data = &pandora_vmmc3, -}; - -static struct platform_device pandora_vwlan_device = { - .name ="reg-fixed-voltage" , - .id =1 , - .dev = { - .platform_data = &pandora_vwlan, - }, -}; - -static void pandora_wl1251_init_card (struct mmc_card *card) -{ -/* -* We have TI wl1251 attached to MMC3. Pass this information to -* SDIO core because it can't be probed by normal methods. -*/ -if (card->type ==MMC_TYPE_SDIO || card->type ==MMC_TYPE_SD_COMBO ) { - card->quirks |=MMC_QUIRK_NONSTD_SDIO ; - card->cccr.wide_bus =1 ; - card->cis.vendor =0x104c ; - card->cis.device =0x9066 ; - card->cis.blksize =512 ; - card->cis.max_dtr =24000000 ; - card->ocr =0x80 ; - } -} - -static struct omap2_hsmmc_info pandora_mmc3[] = { - { - .mmc =3 , - .caps =MMC_CAP_4_BIT_DATA |MMC_CAP_POWER_OFF_CARD , - .gpio_cd = -EINVAL , - .gpio_wp = -EINVAL , - .init_card = pandora_wl1251_init_card, - }, - {}/* Terminator */ -}; - -static void __init pandora_wl1251_init (void ) -{ -struct wl1251_platform_data pandora_wl1251_pdata; -int ret; - -memset (&pandora_wl1251_pdata,0 ,sizeof (pandora_wl1251_pdata)); - - pandora_wl1251_pdata.power_gpio =-1 ; - - ret =gpio_request_one (PANDORA_WIFI_IRQ_GPIO ,GPIOF_IN ,"wl1251 irq" ); -if (ret <0 ) - goto fail; - - pandora_wl1251_pdata.irq =gpio_to_irq (PANDORA_WIFI_IRQ_GPIO ); -if (pandora_wl1251_pdata.irq <0 ) - goto fail_irq; - - pandora_wl1251_pdata.use_eeprom = true; - ret =wl1251_set_platform_data (&pandora_wl1251_pdata); -if (ret <0 ) - goto fail_irq; - -return ; - -fail_irq: -gpio_free (PANDORA_WIFI_IRQ_GPIO ); -fail: -pr_err ("wl1251 board initialisation failed\n" ); -} -static void __init omap3_pandora_legacy_init (void ) {platform_device_register (&pandora_backlight); -platform_device_register (&pandora_vwlan_device); -omap_hsmmc_init (pandora_mmc3); -omap_hsmmc_late_init (pandora_mmc3); -pandora_wl1251_init (); }#endif /* CONFIG_ARCH_OMAP3 */