refactor main RAM allocation to use hostmem backend
Subsystems (5)
cover refactor main RAM allocation to use hostmem backend
Series removes ad hoc RAM allocation API (memory_region_allocate_system_memory) and consolidates it around hostmem backend. It allows to
* resolve conflicts between global -mem-prealloc and hostmem's "policy" option fixing premature allocation before binding policy is applied
* simplify complicated memory allocation routines which had to deal with 2 ways to allocate RAM.
* it allows to reuse hostmem backends of a choice for main RAM without adding extra CLI options to duplicate hostmem features.
Recent case was -mem-shared, to enable vhost-user on targets that don't support hostmem backends [1] (ex: s390)
* move RAM allocation from individual boards into generic machine code and provide them with prepared MemoryRegion.
* clean up deprecated NUMA features which were tied to the old API (see patches)
- "numa: remove deprecated -mem-path fallback to anonymous RAM"
- "numa: remove deprecated implicit RAM distribution between nodes"
- "forbid '-numa node,mem' for 5.0 and newer machine types"
Conversion introduces a new machine.ram-memdev property and wrapper code that aliases global -mem-path and -mem-alloc into automatically created hostmem backend properties (provided ram-memdev was not set explicitly by user). And then follows bulk of trivial patches that incrementally convert individual boards to using machine.ram-memdev provided MemoryRegion.
Board conversion typically involves:
* providing MachineClass::default_ram_size and MachineClass::default_ram_id so generic code could create default backend if user didn't explicitly provide ram-memdev or -m options
* dropping memory_region_allocate_system_memory() call
* using covinience MachineState::ram MemoryRegion, which points to MemoryRegion allocated by ram-memdev
On top of that for some boards:
* added missing ram_size checks (typically it were boards with fixed ram size)
* ram_size fixups were replaced by checks and hard errors, forcing user to provide correct "-m" values instead of ignoring it and continuing running.
After all boards are converted the old API is removed and memory allocation routines are cleaned up.
git tree for testing:
https://github.com/imammedo/qemu convert_main_ram_to_memdev_v1
Igor Mammedov (86):
numa: remove not needed check
numa: properly check if numa is supported
numa: remove deprecated -mem-path fallback to anonymous RAM
machine: introduce ram-memdev property
machine: alias -mem-path and -mem-prealloc into memory-foo backend
machine: introduce convenience MachineState::ram initialize MachineState::ram in NUMA case
alpha:dp264: use memdev for RAM
arm:aspeed: convert valid RAM sizes to data
arm:aspeed: actually check RAM size
hw:aspeed: drop warning and bogus ram_size fixup arm:aspeed: use memdev for RAM
arm:collie: use memdev for RAM
arm:cubieboard: use memdev for RAM
arm:digic_boards: use memdev for RAM
arm:highbank: use memdev for RAM
arm:imx25_pdk: drop RAM size fixup
arm:imx25_pdk: use memdev for RAM
arm:integratorcp: use memdev for RAM
arm:kzm: drop RAM size fixup
arm:kzm: use memdev for RAM
arm:mcimx6ul-evk: use memdev for RAM
arm:mcimx7d-sabre: use memdev for RAM
arm:mps2-tz: use memdev for RAM
arm:mps2: use memdev for RAM
arm:musicpal: use memdev for RAM
arm:nseries: use memdev for RAM
arm:omap_sx1: use memdev for RAM
arm:palm: use memdev for RAM
arm:raspi: use memdev for RAM
arm:sabrelite: use memdev for RAM
arm:sbsa-ref: use memdev for RAM
arm:versatilepb: use memdev for RAM
arm:vexpress: use memdev for RAM
arm:virt: use memdev for RAM
arm:xilinx_zynq: drop RAM size fixup
arm:xilinx_zynq: use memdev for RAM arm:xlnx-versal-virt: use memdev for RAM arm:xlnx-zcu102: use memdev for RAM s390x:s390-virtio-ccw: use memdev for RAM
null-machine: use memdev for RAM
cris:axis_dev88: use memdev for RAM
hppa: drop RAM size fixup
hppa: use memdev for RAM
x86:microvm: use memdev for RAM
x86:pc: use memdev for RAM
lm32:lm32_boards: use memdev for RAM
lm32:milkymist: use memdev for RAM
m68k:an5206: use memdev for RAM
m68k:mcf5208: use memdev for RAM
m68k:next-cube: use memdev for RAM
mips:boston-cube: use memdev for RAM mips:mips_fulong2e: drop RAM size fixup mips:mips_fulong2e: use memdev for RAM
mips:mips_jazz: use memdev for RAM
mips:mips_malta: use memdev for RAM
mips:mips_mipssim: use memdev for RAM
mips:mips_r4k: use memdev for RAM
ppc:e500: drop RAM size fixup
ppc:e500: use memdev for RAM
ppc:mac_newworld: use memdev for RAM
ppc:mac_oldworld: use memdev for RAM
ppc:pnv: use memdev for RAM
ppc:ppc405_boards: add RAM size checks ppc:ppc405_boards: use memdev for RAM ppc:ppc440_bamboo/sam460ex: drop RAM size fixup ppc:ppc440_bamboo/sam460ex: use memdev for RAM ppc:prep: use memdev for RAM
ppc:spapr: use memdev for RAM
ppc:virtex_ml507: remove unused arguments ppc:virtex_ml507: use memdev for RAM
sparc:leon3: use memdev for RAM
sparc:sun4m: use memdev for RAM
sparc:niagara: use memdev for RAM
remove no longer used memory_region_allocate_system_memory() post conversion default_ram_id cleanup
exec: cleanup qemu_minrampagesize()/qemu_maxrampagesize()
exec: drop bogus mem_path from qemu_ram_alloc_from_fd() make mem_path local variable
hostmem: introduce "prealloc-threads" property
hostmem: fix strict bind policy
numa: forbid '-numa node,mem' for 5.0 and newer machine types tests:numa-test: make top level args dynamic and g_autofree(cli)
cleanups
tests:numa-test: use explicit memdev to specify node RAM
numa: make exit() usage consistent
numa: remove deprecated implicit RAM distribution between nodes
hw/alpha/alpha_sys.h | 2 +- include/hw/boards.h | 51 ++++--------- include/hw/misc/aspeed_sdmc.h | 2 + include/hw/ppc/ppc4xx.h | 9 +-- include/sysemu/hostmem.h | 20 ++++- include/sysemu/numa.h | 5 +- include/sysemu/sysemu.h | 2 - backends/hostmem-file.c | 8 -- backends/hostmem-memfd.c | 1 - backends/hostmem-ram.c | 2 - backends/hostmem.c | 53 ++++++++++---- exec.c | 66 ++--------------- hw/alpha/dp264.c | 2 +- hw/alpha/typhoon.c | 8 +- hw/arm/aspeed.c | 13 +--- hw/arm/collie.c | 15 ++-- hw/arm/cubieboard.c | 25 ++----- hw/arm/digic_boards.c | 35 +++++---- hw/arm/highbank.c | 10 +-- hw/arm/imx25_pdk.c | 13 ++-- hw/arm/integratorcp.c | 9 +-- hw/arm/kzm.c | 13 ++-- hw/arm/mcimx6ul-evk.c | 25 +++---- hw/arm/mcimx7d-sabre.c | 25 +++---- hw/arm/mps2-tz.c | 13 +++- hw/arm/mps2.c | 13 +++- hw/arm/musicpal.c | 16 ++-- hw/arm/nseries.c | 31 ++++---- hw/arm/omap_sx1.c | 18 +++-- hw/arm/palm.c | 18 +++-- hw/arm/raspi.c | 32 +++----- hw/arm/sabrelite.c | 23 ++---- hw/arm/sbsa-ref.c | 8 +- hw/arm/versatilepb.c | 7 +- hw/arm/vexpress.c | 14 ++-- hw/arm/virt.c | 9 +-- hw/arm/xilinx_zynq.c | 20 +++-- hw/arm/xlnx-versal-virt.c | 7 +- hw/arm/xlnx-zcu102.c | 7 +- hw/core/machine.c | 41 +++++++++-- hw/core/null-machine.c | 7 +- hw/core/numa.c | 167 +++++++++--------------------------------- hw/cris/axis_dev88.c | 8 +- hw/hppa/machine.c | 10 +-- hw/i386/microvm.c | 12 ++- hw/i386/pc.c | 20 +++-- hw/i386/pc_piix.c | 2 +- hw/i386/pc_q35.c | 2 +- hw/lm32/lm32_boards.c | 36 +++++---- hw/lm32/milkymist.c | 19 +++-- hw/m68k/an5206.c | 5 +- hw/m68k/mcf5208.c | 5 +- hw/m68k/next-cube.c | 5 +- hw/mips/boston.c | 11 ++- hw/mips/mips_fulong2e.c | 15 ++-- hw/mips/mips_jazz.c | 7 +- hw/mips/mips_malta.c | 10 +-- hw/mips/mips_mipssim.c | 9 +-- hw/mips/mips_r4k.c | 12 +-- hw/misc/aspeed_sdmc.c | 112 +++++++++++----------------- hw/ppc/e500.c | 17 ++--- hw/ppc/e500plat.c | 1 + hw/ppc/mac_newworld.c | 6 +- hw/ppc/mac_oldworld.c | 6 +- hw/ppc/mpc8544ds.c | 1 + hw/ppc/pnv.c | 8 +- hw/ppc/ppc405_boards.c | 45 +++++++----- hw/ppc/ppc440_bamboo.c | 12 ++- hw/ppc/ppc4xx_devs.c | 30 ++++---- hw/ppc/prep.c | 15 ++-- hw/ppc/sam460ex.c | 6 +- hw/ppc/spapr.c | 17 +---- hw/ppc/virtex_ml507.c | 18 ++--- hw/s390x/s390-virtio-ccw.c | 7 +- hw/sparc/leon3.c | 6 +- hw/sparc/sun4m.c | 73 +++++++++--------- hw/sparc64/niagara.c | 7 +- qemu-deprecated.texi | 33 --------- qemu-options.hx | 20 ++--- tests/numa-test.c | 90 +++++++++++++---------- vl.c | 37 +++++++++- 81 files changed, 713 insertions(+), 907 deletions(-)
Signature · 1 line
2.7.4
PATCH 1/86 numa: remove not needed check
Currently parse_numa_node() is always called from already numa enabled context.
Drop unnecessary check if numa is supported.
--- hw/core/numa.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
hw/core/numa.c +1 -6
@@ -83,10 +83,6 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node,return ; } -if (!mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id) { -error_setg (errp,"NUMA is not supported by this machine-type" ); -return ; - }for (cpus = node->cpus; cpus; cpus = cpus->next) {CpuInstanceProperties props;if (cpus->value >= max_cpus) {
@@ -178,9 +174,8 @@ void parse_numa_distance(MachineState *ms, NumaDistOptions *dist, Error **errp)void set_numa_options (MachineState *ms,NumaOptions *object,Error **errp) {Error *err =NULL ; -MachineClass *mc =MACHINE_GET_CLASS (ms); -if (!mc->numa_mem_supported) { +if (!ms->numa_state) {error_setg (errp,"NUMA is not supported by this machine-type" ); goto end; }
Signature · 1 line
2.7.4
PATCH 2/86 numa: properly check if numa is supported
In reply to Igor MammedovCommit aa57020774b, by mistake used MachineClass::numa_mem_supported to check if NUMA is supported by machine and also as unrelated change set it to true for sbsa-ref board.
Luckily change didn't break machines that support NUMA, as the field is set to true for them.
But the field is not intended for checking if NUMA is supported and will be flipped to false within this release for new machine types.
Fix it:
- by using previously used condition
!mc->cpu_index_to_instance_props || !mc->get_default_cpu_node_id
the first time and then use MachineState::numa_state down the road to check if NUMA is supported
- dropping stray sbsa-ref chunk
--- hw/arm/sbsa-ref.c | 1 - hw/core/machine.c | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-)
hw/arm/sbsa-ref.c +0 -1
@@ -789,7 +789,6 @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props; mc->get_default_cpu_node_id = sbsa_ref_get_default_cpu_node_id; - mc->numa_mem_supported = true; }static const TypeInfo sbsa_ref_info = {
hw/core/machine.c +2 -2
@@ -843,7 +843,7 @@ static void machine_initfn(Object *obj) NULL); } -if (mc->numa_mem_supported) { +if (mc->cpu_index_to_instance_props && mc->get_default_cpu_node_id) { ms->numa_state =g_new0 (NumaState,1 ); }
@@ -966,7 +966,7 @@ void machine_run_board_init(MachineState *machine) {MachineClass *machine_class =MACHINE_GET_CLASS (machine); -if (machine_class->numa_mem_supported) { +if (machine->numa_state) {numa_complete_configuration (machine);if (machine->numa_state->num_nodes) {machine_numa_finish_cpu_init (machine);
Signature · 1 line
2.7.4
PATCH 3/86 numa: remove deprecated -mem-path fallback to anonymous RAM
In reply to Igor Mammedovit was deprecated since 4.0 by commit
cb79224b7 (deprecate -mem-path fallback to anonymous RAM)
Deprecation period ran ont and it's time to remove it so it won't get in a way of switching to using hostmem backend for RAM.
--- hw/core/numa.c | 18 +----------------- qemu-deprecated.texi | 9 --------- 2 files changed, 1 insertion(+), 26 deletions(-)
hw/core/numa.c +1 -17
@@ -487,24 +487,8 @@ static void allocate_system_memory_nonnuma(MemoryRegion *mr, Object *owner, {if (mem_path) {#ifdef __linux__ -Error *err =NULL ;memory_region_init_ram_from_file (mr, owner, name, ram_size,0 ,0 , - mem_path, &err); -if (err) { -error_report_err (err); -if (mem_prealloc) { -exit (1 ); - } -warn_report ("falling back to regular RAM allocation" ); -error_printf ("This is deprecated. Make sure that -mem-path " -" specified path has sufficient resources to allocate" -" -m specified RAM amount\n" ); -/* Legacy behavior: if allocation failed, fall back to -* regular RAM allocation. -*/ - mem_path =NULL ; -memory_region_init_ram_nomigrate (mr, owner, name, ram_size, &error_fatal); - } + mem_path, &error_fatal);#else fprintf (stderr,"-mem-path not supported on this host\n" );exit (1 );
qemu-deprecated.texi +0 -9
@@ -113,15 +113,6 @@ QEMU using implicit generic or board specific splitting rule. Use @option{memdev} with @var{memory-backend-ram} backend or @option{mem} (if it's supported by used machine type) to define mapping explictly instead. -@subsection -mem-path fallback to RAM (since 4.1) -Currently if guest RAM allocation from file pointed by @option{mem-path} -fails, QEMU falls back to allocating from RAM, which might result -in unpredictable behavior since the backing file specified by the user -is ignored. In the future, users will be responsible for making sure -the backing storage specified with @option{-mem-path} can actually provide -the guest RAM configured with @option{-m} and QEMU will fail to start up if -RAM allocation is unsuccessful. - @subsection RISC-V -bios (since 4.1) QEMU 4.1 introduced support for the -bios option in QEMU for RISC-V for the
Signature · 1 line
2.7.4
PATCH 4/86 machine: introduce ram-memdev property
In reply to Igor MammedovProperty will contain link to memory backend that will be used for backing initial RAM.
Follow up commit will alias -mem-path and -mem-prealloc CLI options into memory backend options to make memory handling consistent (using only hostmem backend family for guest RAM allocation).
--- include/hw/boards.h | 2 ++ hw/core/machine.c | 9 +++++++++ 2 files changed, 11 insertions(+)
include/hw/boards.h +2 -0
@@ -4,6 +4,7 @@#define HW_BOARDS_H #include "exec/memory.h" +#include "sysemu/hostmem.h" #include "sysemu/blockdev.h" #include "sysemu/accel.h" #include "qapi/qapi-types-machine.h"
@@ -288,6 +289,7 @@ struct MachineState {bool enforce_config_section;bool enable_graphics;char *memory_encryption; +HostMemoryBackend *ram_memdev;DeviceMemoryState *device_memory;ram_addr_t ram_size;
hw/core/machine.c +9 -0
@@ -847,6 +847,15 @@ static void machine_initfn(Object *obj) ms->numa_state =g_new0 (NumaState,1 ); } +object_property_add_link (obj,"ram-memdev" ,TYPE_MEMORY_BACKEND , + (Object **)&ms->ram_memdev, + object_property_allow_set_link, +OBJ_PROP_LINK_STRONG , &error_abort); +object_property_set_description (obj,"ram-memdev" , +"Set RAM backend" +"Valid value is ID of hostmem based backend" , + &error_abort); +/* Register notifier when init is done for sysbus sanity checks */ ms->sysbus_notifier.notify = machine_init_notify;qemu_add_machine_init_done_notifier (&ms->sysbus_notifier);
Signature · 1 line
2.7.4
PATCH 5/86 machine: alias -mem-path and -mem-prealloc into memory-foo backend
In reply to Igor MammedovAllow a machine to opt in for hostmem backend based initial RAM even if user used old -mem-path/prealloc options by providing
MachineClass::default_ram_id
Follow up patches will incrementally convert machines to new API, by dropping memory_region_allocate_system_memory() and setting default_ram_id that board used to use before conversion to keep migration stream the same.
--- include/hw/boards.h | 5 +++++ include/sysemu/hostmem.h | 16 ++++++++++++++++ backends/hostmem-file.c | 7 ------- backends/hostmem-ram.c | 2 -- vl.c | 25 +++++++++++++++++++++++++ 5 files changed, 46 insertions(+), 9 deletions(-)
include/hw/boards.h +5 -0
@@ -170,6 +170,10 @@ typedef struct {* false is returned, an error must be set to show the reason of * the rejection. If the hook is not provided, all hotplug will be * allowed. +* @default_ram_id: +* Specifies inital RAM MemoryRegion name to be used for default backend +* creation if user explicitly hasn't specified backend with "ram-memdev" +* property. */ struct MachineClass {/*< private >*/
@@ -226,6 +230,7 @@ struct MachineClass {bool nvdimm_supported;bool numa_mem_supported;bool auto_enable_numa; +const char *default_ram_id; HotplugHandler *(*get_hotplug_handler)(MachineState *machine, DeviceState *dev);
include/sysemu/hostmem.h +16 -0
@@ -27,6 +27,22 @@#define MEMORY_BACKEND_CLASS (klass) \ OBJECT_CLASS_CHECK(HostMemoryBackendClass, (klass), TYPE_MEMORY_BACKEND) +/* hostmem-ram.c */ +/** +* @TYPE_MEMORY_BACKEND_RAM: +* name of backend that uses mmap on the anonymous RAM +*/ + +#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram" + +/* hostmem-file.c */ +/** +* @TYPE_MEMORY_BACKEND_FILE: +* name of backend that uses mmap on a file descriptor +*/ +#define TYPE_MEMORY_BACKEND_FILE "memory-backend-file" + +typedef struct HostMemoryBackend HostMemoryBackend ;typedef struct HostMemoryBackendClass HostMemoryBackendClass ;/**
backends/hostmem-file.c +0 -7
@@ -18,13 +18,6 @@#include "sysemu/sysemu.h" #include "qom/object_interfaces.h" -/* hostmem-file.c */ -/** -* @TYPE_MEMORY_BACKEND_FILE: -* name of backend that uses mmap on a file descriptor -*/ -#define TYPE_MEMORY_BACKEND_FILE "memory-backend-file" -#define MEMORY_BACKEND_FILE (obj) \ OBJECT_CHECK(HostMemoryBackendFile, (obj), TYPE_MEMORY_BACKEND_FILE)
backends/hostmem-ram.c +0 -2
@@ -16,8 +16,6 @@#include "qemu/module.h" #include "qom/object_interfaces.h" -#define TYPE_MEMORY_BACKEND_RAM "memory-backend-ram" -static void ram_backend_memory_alloc (HostMemoryBackend *backend,Error **errp) {
vl.c +25 -0
@@ -75,6 +75,7 @@ int main(int argc, char **argv)#include "ui/input.h" #include "sysemu/sysemu.h" #include "sysemu/numa.h" +#include "sysemu/hostmem.h" #include "exec/gdbstub.h" #include "qemu/timer.h" #include "chardev/char.h"
@@ -2814,6 +2815,25 @@ static void configure_accelerators(const char *progname) } } +static void create_default_memdev (MachineState *ms,const char *path, +bool prealloc) +{ +Object *obj; +MachineClass *mc =MACHINE_GET_CLASS (ms); + + obj =object_new (path ?TYPE_MEMORY_BACKEND_FILE :TYPE_MEMORY_BACKEND_RAM ); +if (path) { +object_property_set_str (obj, path,"mem-path" , &error_fatal); + } +object_property_set_bool (obj, prealloc,"prealloc" , &error_fatal); +object_property_set_int (obj, ms->ram_size,"size" , &error_fatal); +object_property_add_child (object_get_objects_root (), mc->default_ram_id, + obj, &error_fatal); +user_creatable_complete (USER_CREATABLE (obj), &error_fatal); +object_unref (obj); +object_property_set_link (OBJECT (ms), obj,"ram-memdev" , &error_fatal); +} +int main (int argc,char **argv,char **envp) {int i;
@@ -4274,6 +4294,11 @@ int main(int argc, char **argv, char **envp) }parse_numa_opts (current_machine); +if (!current_machine->ram_memdev && + machine_class->default_ram_size && + machine_class->default_ram_id) { +create_default_memdev (current_machine, mem_path, mem_prealloc); + }/* do monitor/qmp handling at preconfig state if requested */ main_loop ();
Signature · 1 line
2.7.4
PATCH 6/86 machine: introduce convenience MachineState::ram
In reply to Igor Mammedovthe new field will be used by boards to get access to main RAM memory region and will help to save boiler plate in boards which often add a field or variable just for this purpose.
Memory region will be equivalent to what currently used memory_region_allocate_system_memory() is returning apart from that it will come from hostmem backend. Followup patches will incrementally switch boards to using RAM from MachineState::ram.
Patch takes care of non-NUMA case and follow up patch will initialize MachineState::ram for NUMA case.
--- include/hw/boards.h | 9 ++++++++- hw/core/machine.c | 21 +++++++++++++++++++++ hw/core/numa.c | 14 +------------- 3 files changed, 30 insertions(+), 14 deletions(-)
include/hw/boards.h +8 -1
@@ -73,7 +73,12 @@ void machine_set_cpu_numa_node(MachineState *machine, Error **errp);void machine_class_allow_dynamic_sysbus_dev (MachineClass *mc,const char *type); - +/* +* Checks that backend isn't used, preps it for exclusive usage and +* returns migratable MemoryRegion provided by backend. +*/ +MemoryRegion *machine_consume_memdev (MachineState *machine, +HostMemoryBackend *backend);/** * CPUArchId:
@@ -295,6 +300,8 @@ struct MachineState {bool enable_graphics;char *memory_encryption;HostMemoryBackend *ram_memdev; +/* convenience alias to ram_memdev memory region or numa container */ +MemoryRegion *ram;DeviceMemoryState *device_memory;ram_addr_t ram_size;
hw/core/machine.c +21 -0
@@ -26,6 +26,7 @@#include "sysemu/qtest.h" #include "hw/pci/pci.h" #include "hw/mem/nvdimm.h" +#include "migration/vmstate.h" GlobalProperty hw_compat_4_2[] = { {"virtio-blk-device" ,"x-enable-wce-if-config-wce" ,"off" },
@@ -971,10 +972,30 @@ static void machine_numa_finish_cpu_init(MachineState *machine)g_string_free (s, true); } +MemoryRegion *machine_consume_memdev (MachineState *machine, +HostMemoryBackend *backend) +{ +MemoryRegion *ret =host_memory_backend_get_memory (backend); + +if (memory_region_is_mapped (ret)) { +char *path =object_get_canonical_path_component (OBJECT (backend)); +error_report ("memory backend %s can't be used multiple times." , path); +g_free (path); +exit (EXIT_FAILURE ); + } +host_memory_backend_set_mapped (backend, true); +vmstate_register_ram_global (ret); +return ret; +} +void machine_run_board_init (MachineState *machine) {MachineClass *machine_class =MACHINE_GET_CLASS (machine); +if (machine->ram_memdev) { + machine->ram =machine_consume_memdev (machine, machine->ram_memdev); + } +if (machine->numa_state) {numa_complete_configuration (machine);if (machine->numa_state->num_nodes) {
hw/core/numa.c +1 -13
@@ -520,20 +520,8 @@ void memory_region_allocate_system_memory(MemoryRegion *mr, Object *owner,if (!backend) {continue ; } -MemoryRegion *seg =host_memory_backend_get_memory (backend); - -if (memory_region_is_mapped (seg)) { -char *path =object_get_canonical_path_component (OBJECT (backend)); -error_report ("memory backend %s is used multiple times. Each " -"-numa option must use a different memdev value." , - path); -g_free (path); -exit (1 ); - } - -host_memory_backend_set_mapped (backend, true); +MemoryRegion *seg =machine_consume_memdev (ms, backend);memory_region_add_subregion (mr, addr, seg); -vmstate_register_ram_global (seg); addr += size; } }
Signature · 1 line
2.7.4
PATCH 7/86 initialize MachineState::ram in NUMA case
In reply to Igor MammedovIn case of NUMA there are 2 cases to consider:
1. '-numa node,memdev', the only one that will be available for 5.0 and newer machine types.
In this case reuse current behavior, with only difference memdevs are put into MachineState::ram container +
a temporary glue to keep memory_region_allocate_system_memory() working until all boards converted.
2. fake NUMA ("-numa node mem" and default RAM splitting) the later has been deprecated and will be removed but the former is going to stay available for compat reasons for 4.2 and older machine types (libvirt was heavy user of this)
it takes allocate_system_memory_nonnuma() path, like non-NUMA case and falls under conversion to memdev. So extend non-NUMA MachineState::ram initialization introduced in previous patch to take care of fake NUMA case.
--- include/sysemu/numa.h | 1 + hw/core/numa.c | 43 ++++++++++++++++++++++++++++++------------- vl.c | 7 ++++--- 3 files changed, 35 insertions(+), 16 deletions(-)
include/sysemu/numa.h +1 -0
@@ -49,5 +49,6 @@ void numa_default_auto_assign_ram(MachineClass *mc, NodeInfo *nodes, int nb_nodes, ram_addr_t size);void numa_cpu_pre_plug (const struct CPUArchId *slot,DeviceState *dev,Error **errp); +bool numa_uses_legacy_mem (void );#endif
hw/core/numa.c +30 -13
75 lines not on this page · raw message
vl.c +4 -3
@@ -4294,9 +4294,10 @@ int main(int argc, char **argv, char **envp) }parse_numa_opts (current_machine); -if (!current_machine->ram_memdev && - machine_class->default_ram_size && - machine_class->default_ram_id) { +if (numa_uses_legacy_mem () && + machine_class->default_ram_size && + machine_class->default_ram_id && + !current_machine->ram_memdev) {create_default_memdev (current_machine, mem_path, mem_prealloc); }/* do monitor/qmp handling at preconfig state if requested */
Signature · 1 line
2.7.4
PATCH 8/86 alpha:dp264: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/alpha/alpha_sys.h | 2 +- hw/alpha/dp264.c | 3 ++- hw/alpha/typhoon.c | 8 ++------ 3 files changed, 5 insertions(+), 8 deletions(-)
hw/alpha/alpha_sys.h +1 -1
@@ -11,7 +11,7 @@#include "hw/intc/i8259.h" -PCIBus *typhoon_init (ram_addr_t ,ISABus **,qemu_irq *,AlphaCPU *[4 ], +PCIBus *typhoon_init (MemoryRegion *,ISABus **,qemu_irq *,AlphaCPU *[4 ],pci_map_irq_fn );/* alpha_pci.c. */
hw/alpha/dp264.c +2 -1
@@ -75,7 +75,7 @@ static void clipper_init(MachineState *machine) cpus[0 ]->env.trap_arg2 = smp_cpus;/* Init the chipset. */ - pci_bus =typhoon_init (ram_size, &isa_bus, &rtc_irq, cpus, + pci_bus =typhoon_init (machine->ram, &isa_bus, &rtc_irq, cpus, clipper_pci_map_irq);/* Since we have an SRM-compatible PALcode, use the SRM epoch. */
@@ -183,6 +183,7 @@ static void clipper_machine_init(MachineClass *mc) mc->max_cpus =4 ; mc->is_default =1 ; mc->default_cpu_type =ALPHA_CPU_TYPE_NAME ("ev67" ); + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("clipper" , clipper_machine_init)
hw/alpha/typhoon.c +2 -6
@@ -58,7 +58,6 @@ typedef struct TyphoonState {TyphoonCchip cchip;TyphoonPchip pchip;MemoryRegion dchip_region; -MemoryRegion ram_region; } TyphoonState;/* Called when one of DRIR or DIM changes. */
@@ -817,8 +816,7 @@ static void typhoon_alarm_timer(void *opaque)cpu_interrupt (CPU (s->cchip.cpu[cpu]),CPU_INTERRUPT_TIMER ); } -PCIBus *typhoon_init (ram_addr_t ram_size,ISABus **isa_bus, -qemu_irq *p_rtc_irq, +PCIBus *typhoon_init (MemoryRegion *ram,ISABus **isa_bus,qemu_irq *p_rtc_irq,AlphaCPU *cpus[4 ],pci_map_irq_fn sys_map_irq) {MemoryRegion *addr_space =get_system_memory ();
@@ -851,9 +849,7 @@ PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,/* Main memory region, 0x00.0000.0000. Real hardware supports 32GB, but the address space hole reserved at this point is 8TB. */ -memory_region_allocate_system_memory (&s->ram_region,OBJECT (s),"ram" , - ram_size); -memory_region_add_subregion (addr_space,0 , &s->ram_region); +memory_region_add_subregion (addr_space,0 , ram);/* TIGbus, 0x801.0000.0000, 1GB. */ /* ??? The TIGbus is used for delivering interrupts, and access to
Signature · 1 line
2.7.4
Re: [PATCH 08/86] alpha:dp264: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 74 lines
--- hw/alpha/alpha_sys.h | 2 +- hw/alpha/dp264.c | 3 ++- hw/alpha/typhoon.c | 8 ++------ 3 files changed, 5 insertions(+), 8 deletions(-)hw/alpha/alpha_sys.h +1
-1@@ -11,7 +11,7 @@#include "hw/intc/i8259.h" -PCIBus *typhoon_init (ram_addr_t ,ISABus **,qemu_irq *,AlphaCPU *[4 ], +PCIBus *typhoon_init (MemoryRegion *,ISABus **,qemu_irq *,AlphaCPU *[4 ],pci_map_irq_fn );/* alpha_pci.c. */ hw/alpha/dp264.c +2
-1@@ -75,7 +75,7 @@ static void clipper_init(MachineState *machine) cpus[0 ]->env.trap_arg2 = smp_cpus;/* Init the chipset. */ - pci_bus =typhoon_init (ram_size, &isa_bus, &rtc_irq, cpus, + pci_bus =typhoon_init (machine->ram, &isa_bus, &rtc_irq, cpus, clipper_pci_map_irq);/* Since we have an SRM-compatible PALcode, use the SRM epoch. */ @@ -183,6 +183,7 @@ static void clipper_machine_init(MachineClass *mc) mc->max_cpus =4 ; mc->is_default =1 ; mc->default_cpu_type =ALPHA_CPU_TYPE_NAME ("ev67" ); + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("clipper" , clipper_machine_init)hw/alpha/typhoon.c +2
-6@@ -58,7 +58,6 @@ typedef struct TyphoonState {TyphoonCchip cchip;TyphoonPchip pchip;MemoryRegion dchip_region; -MemoryRegion ram_region; } TyphoonState;/* Called when one of DRIR or DIM changes. */ @@ -817,8 +816,7 @@ static void typhoon_alarm_timer(void *opaque)cpu_interrupt (CPU (s->cchip.cpu[cpu]),CPU_INTERRUPT_TIMER ); } -PCIBus *typhoon_init (ram_addr_t ram_size,ISABus **isa_bus, -qemu_irq *p_rtc_irq, +PCIBus *typhoon_init (MemoryRegion *ram,ISABus **isa_bus,qemu_irq *p_rtc_irq,AlphaCPU *cpus[4 ],pci_map_irq_fn sys_map_irq) {MemoryRegion *addr_space =get_system_memory ();@@ -851,9 +849,7 @@ PCIBus *typhoon_init(ram_addr_t ram_size, ISABus **isa_bus,/* Main memory region, 0x00.0000.0000. Real hardware supports 32GB, but the address space hole reserved at this point is 8TB. */ -memory_region_allocate_system_memory (&s->ram_region,OBJECT (s),"ram" , - ram_size); -memory_region_add_subregion (addr_space,0 , &s->ram_region); +memory_region_add_subregion (addr_space,0 , ram);/* TIGbus, 0x801.0000.0000, 1GB. */ /* ??? The TIGbus is used for delivering interrupts, and access to
Re: [PATCH 08/86] alpha:dp264: use memdev for RAM
In reply to Igor MammedovQuoted 8 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.
Quoted 6 lines
Signed-off-by Igor Mammedov <[email protected]>--- hw/alpha/alpha_sys.h | 2 +- hw/alpha/dp264.c | 3 ++- hw/alpha/typhoon.c | 8 ++------ 3 files changed, 5 insertions(+), 8 deletions(-)
r~
PATCH 9/86 arm:aspeed: convert valid RAM sizes to data
In reply to Igor Mammedovvarious foo_rambits() hardcode mapping of RAM sizes to RAM feature bits, which is hard to reuse and repeats over and over.
Convert maps into GLib's hash tables and perform mapping using common mapping function.
Follow up patch will reuse tables for actually checking ram-size property.
--- include/hw/misc/aspeed_sdmc.h | 2 + hw/misc/aspeed_sdmc.c | 116 ++++++++++++++++-------------------------- 2 files changed, 47 insertions(+), 71 deletions(-)
include/hw/misc/aspeed_sdmc.h +2 -0
@@ -39,6 +39,8 @@ typedef struct AspeedSDMCState { typedef struct AspeedSDMCClass { SysBusDeviceClass parent_class; + GHashTable *ram2feat; + int fallback_ram_size; uint64_t max_ram_size; uint32_t (*compute_conf)(AspeedSDMCState *s, uint32_t data); void (*write)(AspeedSDMCState *s, uint32_t reg, uint32_t data);
hw/misc/aspeed_sdmc.c +45 -71
181 lines not on this page · raw message
Signature · 1 line
2.7.4
PATCH 10/86 arm:aspeed: actually check RAM size
In reply to Igor MammedovIt's supposed that SOC will check if "-m" provided RAM size is valid by setting "ram-size" property and then board would read back valid (possibly corrected value) to allocate/map RAM MemoryRegion with valid size. Well it isn't doing so, since check is called too late indirectly from
aspeed_sdmc_reset()->asc->compute_conf()
or much later when guest writes to configuration register.
So depending on "-m" value QEMU end-ups with a warning and an invalid MemoryRegion size allocated and mapped. (examples:
-M ast2500-evb -m 1M
0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
0000000080000000-00000000800fffff (prio 0, ram): ram
0000000080100000-00000000bfffffff (prio 0, i/o): max_ram
-M ast2500-evb -m 3G
0000000080000000-000000017ffffffe (prio 0, i/o): aspeed-ram-container
0000000080000000-000000013fffffff (prio 0, ram): ram
[DETECTED OVERFLOW!] 0000000140000000-00000000bfffffff (prio 0, i/o): max_ram)
On top of that sdmc falls back and reports to guest "default" size, it thinks machine should have.
For CLI side machine should honor whatever user configured or error out to make user fix CLI.
This patch makes ram-size check actually work and changes behavior from a warning later on during machine reset to error_fatal at the moment SOC is realized so user will have to fix RAM size on CLI to start machine.
It also gets out of the way mutable ram-size logic, so we could consolidate RAM allocation logic around pre-allocated hostmem backend (supplied by user or auto created by generic machine code depending on supplied -m/mem-path/mem-prealloc options.
--- hw/arm/aspeed.c | 9 +-------- hw/misc/aspeed_sdmc.c | 5 +++++ 2 files changed, 6 insertions(+), 8 deletions(-)
hw/arm/aspeed.c +1 -8
@@ -213,14 +213,7 @@ static void aspeed_machine_init(MachineState *machine) "hw-prot-key", &error_abort); }object_property_set_bool (OBJECT (&bmc->soc), true,"realized" , - &error_abort); - -/* -* Allocate RAM after the memory controller has checked the size -* was valid. If not, a default value is used. -*/ - ram_size =object_property_get_uint (OBJECT (&bmc->soc),"ram-size" , - &error_abort); + &error_fatal);memory_region_allocate_system_memory (&bmc->ram,NULL ,"ram" , ram_size);memory_region_add_subregion (&bmc->ram_container,0 , &bmc->ram);
hw/misc/aspeed_sdmc.c +5 -0
@@ -165,6 +165,11 @@ static void aspeed_sdmc_realize(DeviceState *dev, Error **errp)AspeedSDMCState *s =ASPEED_SDMC (dev);AspeedSDMCClass *asc =ASPEED_SDMC_GET_CLASS (s); +if (!g_hash_table_contains (asc->ram2feat, +GINT_TO_POINTER (s->ram_size >>20 ))) { +error_setg (errp,"Invalid RAM size 0x%" PRIx64, s->ram_size); +return ; + } s->max_ram_size = asc->max_ram_size; memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_sdmc_ops, s,
Signature · 1 line
2.7.4
PATCH 11/86 hw:aspeed: drop warning and bogus ram_size fixup
In reply to Igor MammedovIt was useless to try fixup ram_size and print warning on guest access to config register to begin with.
Now previous patch made sure that SDMC can not be realized with invalid RAM size, so there is no case where warning and not used ram_size fixup could be triggered.
So remove now dead code.
--- hw/misc/aspeed_sdmc.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)
hw/misc/aspeed_sdmc.c +1 -10
@@ -219,17 +219,8 @@ static int aspeed_get_ram_feat(AspeedSDMCState *s) {AspeedSDMCClass *asc =ASPEED_SDMC_GET_CLASS (s);int ram_mb = s->ram_size >>20 ; -gpointer val; +gpointer val =g_hash_table_lookup (asc->ram2feat,GINT_TO_POINTER (ram_mb)); -if (g_hash_table_contains (asc->ram2feat,GINT_TO_POINTER (ram_mb))) { - val =g_hash_table_lookup (asc->ram2feat,GINT_TO_POINTER (ram_mb)); -return GPOINTER_TO_INT (val); - } - -warn_report ("Invalid RAM size 0x%" PRIx64". Using default %dM" , - s->ram_size, asc->fallback_ram_size); - s->ram_size = asc->fallback_ram_size <<20 ; - val =g_hash_table_lookup (asc->ram2feat, &asc->fallback_ram_size);return GPOINTER_TO_INT (val); }
Signature · 1 line
2.7.4
PATCH 12/86 arm:aspeed: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/aspeed.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
hw/arm/aspeed.c +2 -3
@@ -35,7 +35,6 @@ static struct arm_boot_info aspeed_board_binfo = {struct AspeedBoardState {AspeedSoCState soc;MemoryRegion ram_container; -MemoryRegion ram;MemoryRegion max_ram; };
@@ -184,6 +183,7 @@ static void aspeed_machine_init(MachineState *machine)memory_region_init (&bmc->ram_container,NULL ,"aspeed-ram-container" ,UINT32_MAX ); +memory_region_add_subregion (&bmc->ram_container,0 , machine->ram); object_initialize_child(OBJECT(machine), "soc", &bmc->soc, (sizeof(bmc->soc)), amc->soc_name, &error_abort,
@@ -215,8 +215,6 @@ static void aspeed_machine_init(MachineState *machine)object_property_set_bool (OBJECT (&bmc->soc), true,"realized" , &error_fatal); -memory_region_allocate_system_memory (&bmc->ram,NULL ,"ram" , ram_size); -memory_region_add_subregion (&bmc->ram_container,0 , &bmc->ram);memory_region_add_subregion (get_system_memory (), sc->memmap[ASPEED_SDRAM ], &bmc->ram_container);
@@ -393,6 +391,7 @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy =1 ; mc->no_cdrom =1 ; mc->no_parallel =1 ; + mc->default_ram_id ="ram" ; }static void aspeed_machine_palmetto_class_init (ObjectClass *oc,void *data)
Signature · 1 line
2.7.4
PATCH 13/86 arm:collie: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/collie.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)
hw/arm/collie.c +10 -5
@@ -20,20 +20,23 @@static struct arm_boot_info collie_binfo = { .loader_start =SA_SDCS0 , - .ram_size =0x20000000 , };static void collie_init (MachineState *machine) {StrongARMState *s;DriveInfo *dinfo; -MemoryRegion *sdram =g_new (MemoryRegion,1 ); +MachineClass *mc =MACHINE_GET_CLASS (machine); + +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } s =sa1110_init (machine->cpu_type); -memory_region_allocate_system_memory (sdram,NULL ,"strongarm.sdram" , - collie_binfo.ram_size); -memory_region_add_subregion (get_system_memory (),SA_SDCS0 , sdram); +memory_region_add_subregion (get_system_memory (),SA_SDCS0 , machine->ram); dinfo =drive_get (IF_PFLASH ,0 ,0 ); pflash_cfi01_register(SA_CS0, "collie.fl1", 0x02000000,
@@ -57,6 +60,8 @@ static void collie_machine_init(MachineClass *mc) mc->init = collie_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("sa1110" ); + mc->default_ram_size =0x20000000 ; + mc->default_ram_id ="strongarm.sdram" ; }DEFINE_MACHINE ("collie" , collie_machine_init)
Signature · 1 line
2.7.4
PATCH 14/86 arm:cubieboard: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
While at it, get rid of no longer needed CubieBoardState wrapper.
--- hw/arm/cubieboard.c | 25 ++++++++----------------- 1 file changed, 8 insertions(+), 17 deletions(-)
hw/arm/cubieboard.c +8 -17
@@ -28,52 +28,42 @@ static struct arm_boot_info cubieboard_binfo = { .board_id = 0x1008, }; -typedef struct CubieBoardState { -AwA10State *a10; -MemoryRegion sdram; -}CubieBoardState ; -static void cubieboard_init (MachineState *machine) { -CubieBoardState *s =g_new (CubieBoardState,1 ); +AwA10State *a10 =AW_A10 (object_new (TYPE_AW_A10 ));Error *err =NULL ; - s->a10 =AW_A10 (object_new (TYPE_AW_A10 )); - -object_property_set_int (OBJECT (&s->a10->emac),1 ,"phy-addr" , &err); +object_property_set_int (OBJECT (&a10->emac),1 ,"phy-addr" , &err);if (err !=NULL ) {error_reportf_err (err,"Couldn't set phy address: " );exit (1 ); } -object_property_set_int (OBJECT (&s->a10->timer),32768 ,"clk0-freq" , &err); +object_property_set_int (OBJECT (&a10->timer),32768 ,"clk0-freq" , &err);if (err !=NULL ) {error_reportf_err (err,"Couldn't set clk0 frequency: " );exit (1 ); } -object_property_set_int (OBJECT (&s->a10->timer),24000000 ,"clk1-freq" , - &err); +object_property_set_int (OBJECT (&a10->timer),24000000 ,"clk1-freq" , &err);if (err !=NULL ) {error_reportf_err (err,"Couldn't set clk1 frequency: " );exit (1 ); } -object_property_set_bool (OBJECT (s->a10), true,"realized" , &err); +object_property_set_bool (OBJECT (a10), true,"realized" , &err);if (err !=NULL ) {error_reportf_err (err,"Couldn't realize Allwinner A10: " );exit (1 ); } -memory_region_allocate_system_memory (&s->sdram,NULL ,"cubieboard.ram" , - machine->ram_size);memory_region_add_subregion (get_system_memory (),AW_A10_SDRAM_BASE , - &s->sdram); + machine->ram);/* TODO create and connect IDE devices for ide_drive_get() */ cubieboard_binfo.ram_size = machine->ram_size; -arm_load_kernel (&s->a10->cpu, machine, &cubieboard_binfo); +arm_load_kernel (&a10->cpu, machine, &cubieboard_binfo); }static void cubieboard_machine_init (MachineClass *mc)
@@ -84,6 +74,7 @@ static void cubieboard_machine_init(MachineClass *mc) mc->block_default_type =IF_IDE ; mc->units_per_default_bus =1 ; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="cubieboard.ram" ; }DEFINE_MACHINE ("cubieboard" , cubieboard_machine_init)
Signature · 1 line
2.7.4
PATCH 15/86 arm:digic_boards: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
remove no longer needed DigicBoardState
PS2:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/digic_boards.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
hw/arm/digic_boards.c +18 -18
@@ -35,39 +35,38 @@#include "hw/loader.h" #include "sysemu/sysemu.h" #include "sysemu/qtest.h" +#include "qemu/units.h" #define DIGIC4_ROM0_BASE 0xf0000000#define DIGIC4_ROM1_BASE 0xf8000000#define DIGIC4_ROM_MAX_SIZE 0x08000000 -typedef struct DigicBoardState { -DigicState *digic; -MemoryRegion ram; -}DigicBoardState ; -typedef struct DigicBoard { -hwaddr ram_size; -void (*add_rom0)(DigicBoardState *,hwaddr ,const char *); +void (*add_rom0)(DigicState *,hwaddr ,const char *);const char *rom0_def_filename; -void (*add_rom1)(DigicBoardState *,hwaddr ,const char *); +void (*add_rom1)(DigicState *,hwaddr ,const char *);const char *rom1_def_filename; }DigicBoard ; -static void digic4_board_init (DigicBoard *board) +static void digic4_board_init (MachineState *machine,DigicBoard *board) {Error *err =NULL ; +MachineClass *mc =MACHINE_GET_CLASS (machine); -DigicBoardState *s =g_new (DigicBoardState,1 ); +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } - s->digic =DIGIC (object_new (TYPE_DIGIC )); -object_property_set_bool (OBJECT (s->digic), true,"realized" , &err); +DigicState *s =DIGIC (object_new (TYPE_DIGIC )); +object_property_set_bool (OBJECT (s), true,"realized" , &err);if (err !=NULL ) {error_reportf_err (err,"Couldn't realize DIGIC SoC: " );exit (1 ); } -memory_region_allocate_system_memory (&s->ram,NULL ,"ram" , board->ram_size); -memory_region_add_subregion (get_system_memory (),0 , &s->ram); +memory_region_add_subregion (get_system_memory (),0 , machine->ram);if (board->add_rom0) { board->add_rom0 (s,DIGIC4_ROM0_BASE , board->rom0_def_filename);
@@ -78,7 +77,7 @@ static void digic4_board_init(DigicBoard *board) } } -static void digic_load_rom (DigicBoardState *s,hwaddr addr, +static void digic_load_rom (DigicState *s,hwaddr addr,hwaddr max_size,const char *def_filename) {target_long rom_size;
@@ -118,7 +117,7 @@ static void digic_load_rom(DigicBoardState *s, hwaddr addr,* Samsung K8P3215UQB * 64M Bit (4Mx16) Page Mode / Multi-Bank NOR Flash Memory */ -static void digic4_add_k8p3215uqb_rom (DigicBoardState *s,hwaddr addr, +static void digic4_add_k8p3215uqb_rom (DigicState *s,hwaddr addr,const char *def_filename) {#define FLASH_K8P3215UQB_SIZE (4 * 1024 * 1024)
@@ -135,14 +134,13 @@ static void digic4_add_k8p3215uqb_rom(DigicBoardState *s, hwaddr addr, }static DigicBoard digic4_board_canon_a1100 = { - .ram_size =64 *1024 *1024 , .add_rom1 = digic4_add_k8p3215uqb_rom, .rom1_def_filename ="canon-a1100-rom1.bin" , };static void canon_a1100_init (MachineState *machine) { -digic4_board_init (&digic4_board_canon_a1100); +digic4_board_init (machine, &digic4_board_canon_a1100); }static void canon_a1100_machine_init (MachineClass *mc)
@@ -150,6 +148,8 @@ static void canon_a1100_machine_init(MachineClass *mc) mc->desc ="Canon PowerShot A1100 IS" ; mc->init = &canon_a1100_init; mc->ignore_memory_transaction_failures = true; + mc->default_ram_size =64 * MiB; + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("canon-a1100" , canon_a1100_machine_init)
Signature · 1 line
2.7.4
PATCH 16/86 arm:highbank: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/highbank.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
hw/arm/highbank.c +4 -6
@@ -236,7 +236,6 @@ enum cxmachines {*/ static void calxeda_init (MachineState *machine,enum cxmachines machine_id) { -ram_addr_t ram_size = machine->ram_size;DeviceState *dev =NULL ;SysBusDevice *busdev;qemu_irq pic[128 ];
@@ -247,7 +246,6 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)qemu_irq cpu_virq[4 ];qemu_irq cpu_vfiq[4 ];MemoryRegion *sysram; -MemoryRegion *dram;MemoryRegion *sysmem;char *sysboot_filename;
@@ -290,10 +288,8 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id) } sysmem =get_system_memory (); - dram =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (dram,NULL ,"highbank.dram" , ram_size);/* SDRAM at address zero. */ -memory_region_add_subregion (sysmem,0 , dram); +memory_region_add_subregion (sysmem,0 , machine->ram); sysram =g_new (MemoryRegion,1 ); memory_region_init_ram(sysram, NULL, "highbank.sysram", 0x8000,
@@ -387,7 +383,7 @@ static void calxeda_init(MachineState *machine, enum cxmachines machine_id)/* TODO create and connect IDE devices for ide_drive_get() */ - highbank_binfo.ram_size = ram_size; + highbank_binfo.ram_size = machine->ram_size;/* highbank requires a dtb in order to boot, and the dtb will override * the board ID. The following value is ignored, so set it to -1 to be * clear that the value is meaningless.
@@ -430,6 +426,7 @@ static void highbank_class_init(ObjectClass *oc, void *data) mc->units_per_default_bus =1 ; mc->max_cpus =4 ; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="highbank.dram" ; }static const TypeInfo highbank_type = {
@@ -448,6 +445,7 @@ static void midway_class_init(ObjectClass *oc, void *data) mc->units_per_default_bus =1 ; mc->max_cpus =4 ; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="highbank.dram" ; }static const TypeInfo midway_type = {
Signature · 1 line
2.7.4
PATCH 17/86 arm:imx25_pdk: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- hw/arm/imx25_pdk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/arm/imx25_pdk.c +2 -2
@@ -78,10 +78,10 @@ static void imx25_pdk_init(MachineState *machine)/* We need to initialize our memory */ if (machine->ram_size > (FSL_IMX25_SDRAM0_SIZE +FSL_IMX25_SDRAM1_SIZE )) { -warn_report ("RAM size " RAM_ADDR_FMT " above max supported, " +error_report ("RAM size " RAM_ADDR_FMT " above max supported, " "reduced to %x" , machine->ram_size,FSL_IMX25_SDRAM0_SIZE +FSL_IMX25_SDRAM1_SIZE ); - machine->ram_size =FSL_IMX25_SDRAM0_SIZE +FSL_IMX25_SDRAM1_SIZE ; +exit (EXIT_FAILURE ); } memory_region_allocate_system_memory(&s->ram, NULL, "imx25.ram",
Signature · 1 line
2.7.4
PATCH 18/86 arm:imx25_pdk: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/imx25_pdk.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
hw/arm/imx25_pdk.c +4 -5
@@ -58,7 +58,6 @@typedef struct IMX25PDK {FslIMX25State soc; -MemoryRegion ram;MemoryRegion ram_alias; }IMX25PDK ;
@@ -84,10 +83,8 @@ static void imx25_pdk_init(MachineState *machine)exit (EXIT_FAILURE ); } -memory_region_allocate_system_memory (&s->ram,NULL ,"imx25.ram" , - machine->ram_size);memory_region_add_subregion (get_system_memory (),FSL_IMX25_SDRAM0_ADDR , - &s->ram); + machine->ram);/* initialize the alias memory if any */ for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
@@ -107,7 +104,8 @@ static void imx25_pdk_init(MachineState *machine)if (size < ram[i].size) {memory_region_init_alias (&s->ram_alias,NULL ,"ram.alias" , - &s->ram, alias_offset, ram[i].size - size); + machine->ram, + alias_offset, ram[i].size - size);memory_region_add_subregion (get_system_memory (), ram[i].addr + size, &s->ram_alias); }
@@ -135,6 +133,7 @@ static void imx25_pdk_machine_init(MachineClass *mc) mc->desc ="ARM i.MX25 PDK board (ARM926)" ; mc->init = imx25_pdk_init; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="imx25.ram" ; }DEFINE_MACHINE ("imx25-pdk" , imx25_pdk_machine_init)
Signature · 1 line
2.7.4
PATCH 19/86 arm:integratorcp: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/integratorcp.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
hw/arm/integratorcp.c +4 -5
@@ -585,7 +585,6 @@ static void integratorcp_init(MachineState *machine)Object *cpuobj;ARMCPU *cpu;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *ram_alias =g_new (MemoryRegion,1 );qemu_irq pic[32 ];DeviceState *dev, *sic, *icp;
@@ -605,14 +604,13 @@ static void integratorcp_init(MachineState *machine) cpu =ARM_CPU (cpuobj); -memory_region_allocate_system_memory (ram,NULL ,"integrator.ram" , - ram_size);/* ??? On a real system the first 1Mb is mapped as SSRAM or boot flash. */ /* ??? RAM should repeat to fill physical memory space. */ /* SDRAM at address zero*/ -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* And again at address 0x80000000 */ -memory_region_init_alias (ram_alias,NULL ,"ram.alias" , ram,0 , ram_size); +memory_region_init_alias (ram_alias,NULL ,"ram.alias" , machine->ram, +0 , ram_size);memory_region_add_subregion (address_space_mem,0x80000000 , ram_alias); dev =qdev_create (NULL ,TYPE_INTEGRATOR_CM );
@@ -660,6 +658,7 @@ static void integratorcp_machine_init(MachineClass *mc) mc->init = integratorcp_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm926" ); + mc->default_ram_id ="integrator.ram" ; }DEFINE_MACHINE ("integratorcp" , integratorcp_machine_init)
Signature · 1 line
2.7.4
PATCH 20/86 arm:kzm: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- hw/arm/kzm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
hw/arm/kzm.c +2 -2
@@ -78,10 +78,10 @@ static void kzm_init(MachineState *machine)/* Check the amount of memory is compatible with the SOC */ if (machine->ram_size > (FSL_IMX31_SDRAM0_SIZE +FSL_IMX31_SDRAM1_SIZE )) { -warn_report ("RAM size " RAM_ADDR_FMT " above max supported, " +error_report ("RAM size " RAM_ADDR_FMT " above max supported, " "reduced to %x" , machine->ram_size,FSL_IMX31_SDRAM0_SIZE +FSL_IMX31_SDRAM1_SIZE ); - machine->ram_size =FSL_IMX31_SDRAM0_SIZE +FSL_IMX31_SDRAM1_SIZE ; +exit (EXIT_FAILURE ); } memory_region_allocate_system_memory(&s->ram, NULL, "kzm.ram",
Signature · 1 line
2.7.4
PATCH 21/86 arm:kzm: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/kzm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)
hw/arm/kzm.c +4 -5
@@ -51,7 +51,6 @@typedef struct IMX31KZM {FslIMX31State soc; -MemoryRegion ram;MemoryRegion ram_alias; }IMX31KZM ;
@@ -84,10 +83,8 @@ static void kzm_init(MachineState *machine)exit (EXIT_FAILURE ); } -memory_region_allocate_system_memory (&s->ram,NULL ,"kzm.ram" , - machine->ram_size);memory_region_add_subregion (get_system_memory (),FSL_IMX31_SDRAM0_ADDR , - &s->ram); + machine->ram);/* initialize the alias memory if any */ for (i = 0, ram_size = machine->ram_size, alias_offset = 0;
@@ -107,7 +104,8 @@ static void kzm_init(MachineState *machine)if (size < ram[i].size) {memory_region_init_alias (&s->ram_alias,NULL ,"ram.alias" , - &s->ram, alias_offset, ram[i].size - size); + machine->ram, + alias_offset, ram[i].size - size);memory_region_add_subregion (get_system_memory (), ram[i].addr + size, &s->ram_alias); }
@@ -139,6 +137,7 @@ static void kzm_machine_init(MachineClass *mc) mc->desc ="ARM KZM Emulation Baseboard (ARM1136)" ; mc->init = kzm_init; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="kzm.ram" ; }DEFINE_MACHINE ("kzm" , kzm_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 21/86] arm:kzm: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 47 lines
--- hw/arm/kzm.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-)hw/arm/kzm.c +4
-5@@ -51,7 +51,6 @@typedef struct IMX31KZM {FslIMX31State soc; -MemoryRegion ram;MemoryRegion ram_alias; }IMX31KZM ;@@ -84,10 +83,8 @@ static void kzm_init(MachineState *machine)exit (EXIT_FAILURE ); } -memory_region_allocate_system_memory (&s->ram,NULL ,"kzm.ram" , - machine->ram_size);memory_region_add_subregion (get_system_memory (),FSL_IMX31_SDRAM0_ADDR , - &s->ram); + machine->ram);/* initialize the alias memory if any */ for (i = 0, ram_size = machine->ram_size, alias_offset = 0;@@ -107,7 +104,8 @@ static void kzm_init(MachineState *machine)if (size < ram[i].size) {memory_region_init_alias (&s->ram_alias,NULL ,"ram.alias" , - &s->ram, alias_offset, ram[i].size - size); + machine->ram, + alias_offset, ram[i].size - size);memory_region_add_subregion (get_system_memory (), ram[i].addr + size, &s->ram_alias); }@@ -139,6 +137,7 @@ static void kzm_machine_init(MachineClass *mc) mc->desc ="ARM KZM Emulation Baseboard (ARM1136)" ; mc->init = kzm_init; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="kzm.ram" ; }DEFINE_MACHINE ("kzm" , kzm_machine_init)
PATCH 22/86 arm:mcimx6ul-evk: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
remove no longer needed MCIMX6ULEVK
--- hw/arm/mcimx6ul-evk.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)
hw/arm/mcimx6ul-evk.c +9 -16
@@ -19,15 +19,10 @@#include "qemu/error-report.h" #include "sysemu/qtest.h" -typedef struct { -FslIMX6ULState soc; -MemoryRegion ram; -}MCIMX6ULEVK ; -static void mcimx6ul_evk_init (MachineState *machine) {static struct arm_boot_info boot_info; -MCIMX6ULEVK *s =g_new0 (MCIMX6ULEVK ,1 ); +FslIMX6ULState *s;int i;if (machine->ram_size >FSL_IMX6UL_MMDC_SIZE ) {
@@ -43,15 +38,12 @@ static void mcimx6ul_evk_init(MachineState *machine) .nb_cpus = machine->smp.cpus, }; -object_initialize_child (OBJECT (machine),"soc" , &s->soc,sizeof (s->soc), -TYPE_FSL_IMX6UL , &error_fatal,NULL ); - -object_property_set_bool (OBJECT (&s->soc), true,"realized" , &error_fatal); + s =FSL_IMX6UL (object_new (TYPE_FSL_IMX6UL )); +object_property_add_child (OBJECT (machine),"soc" ,OBJECT (s), &error_fatal); +object_property_set_bool (OBJECT (s), true,"realized" , &error_fatal); -memory_region_allocate_system_memory (&s->ram,NULL ,"mcimx6ul-evk.ram" , - machine->ram_size); -memory_region_add_subregion (get_system_memory (), -FSL_IMX6UL_MMDC_ADDR , &s->ram); +memory_region_add_subregion (get_system_memory (),FSL_IMX6UL_MMDC_ADDR , + machine->ram);for (i =0 ; i <FSL_IMX6UL_NUM_USDHCS ; i++) {BusState *bus;
@@ -61,7 +53,7 @@ static void mcimx6ul_evk_init(MachineState *machine) di =drive_get_next (IF_SD ); blk = di ?blk_by_legacy_dinfo (di) :NULL ; - bus =qdev_get_child_bus (DEVICE (&s->soc.usdhc[i]),"sd-bus" ); + bus =qdev_get_child_bus (DEVICE (&s->usdhc[i]),"sd-bus" ); carddev =qdev_create (bus,TYPE_SD_CARD );qdev_prop_set_drive (carddev,"drive" , blk, &error_fatal); object_property_set_bool(OBJECT(carddev), true,
@@ -69,7 +61,7 @@ static void mcimx6ul_evk_init(MachineState *machine) }if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu, machine, &boot_info); +arm_load_kernel (&s->cpu, machine, &boot_info); } }
@@ -78,5 +70,6 @@ static void mcimx6ul_evk_machine_init(MachineClass *mc) mc->desc ="Freescale i.MX6UL Evaluation Kit (Cortex A7)" ; mc->init = mcimx6ul_evk_init; mc->max_cpus =FSL_IMX6UL_NUM_CPUS ; + mc->default_ram_id ="mcimx6ul-evk.ram" ; }DEFINE_MACHINE ("mcimx6ul-evk" , mcimx6ul_evk_machine_init)
Signature · 1 line
2.7.4
PATCH 23/86 arm:mcimx7d-sabre: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
remove no longer needed MCIMX7Sabre
--- hw/arm/mcimx7d-sabre.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)
hw/arm/mcimx7d-sabre.c +9 -16
@@ -21,15 +21,10 @@#include "qemu/error-report.h" #include "sysemu/qtest.h" -typedef struct { -FslIMX7State soc; -MemoryRegion ram; -}MCIMX7Sabre ; -static void mcimx7d_sabre_init (MachineState *machine) {static struct arm_boot_info boot_info; -MCIMX7Sabre *s =g_new0 (MCIMX7Sabre,1 ); +FslIMX7State *s;int i;if (machine->ram_size >FSL_IMX7_MMDC_SIZE ) {
@@ -45,15 +40,12 @@ static void mcimx7d_sabre_init(MachineState *machine) .nb_cpus = machine->smp.cpus, }; -object_initialize_child (OBJECT (machine),"soc" , - &s->soc,sizeof (s->soc), -TYPE_FSL_IMX7 , &error_fatal,NULL ); -object_property_set_bool (OBJECT (&s->soc), true,"realized" , &error_fatal); + s =FSL_IMX7 (object_new (TYPE_FSL_IMX7 )); +object_property_add_child (OBJECT (machine),"soc" ,OBJECT (s), &error_fatal); +object_property_set_bool (OBJECT (s), true,"realized" , &error_fatal); -memory_region_allocate_system_memory (&s->ram,NULL ,"mcimx7d-sabre.ram" , - machine->ram_size); -memory_region_add_subregion (get_system_memory (), -FSL_IMX7_MMDC_ADDR , &s->ram); +memory_region_add_subregion (get_system_memory (),FSL_IMX7_MMDC_ADDR , + machine->ram);for (i =0 ; i <FSL_IMX7_NUM_USDHCS ; i++) {BusState *bus;
@@ -63,7 +55,7 @@ static void mcimx7d_sabre_init(MachineState *machine) di =drive_get_next (IF_SD ); blk = di ?blk_by_legacy_dinfo (di) :NULL ; - bus =qdev_get_child_bus (DEVICE (&s->soc.usdhc[i]),"sd-bus" ); + bus =qdev_get_child_bus (DEVICE (&s->usdhc[i]),"sd-bus" ); carddev =qdev_create (bus,TYPE_SD_CARD );qdev_prop_set_drive (carddev,"drive" , blk, &error_fatal); object_property_set_bool(OBJECT(carddev), true,
@@ -71,7 +63,7 @@ static void mcimx7d_sabre_init(MachineState *machine) }if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu[0 ], machine, &boot_info); +arm_load_kernel (&s->cpu[0 ], machine, &boot_info); } }
@@ -80,5 +72,6 @@ static void mcimx7d_sabre_machine_init(MachineClass *mc) mc->desc ="Freescale i.MX7 DUAL SABRE (Cortex A7)" ; mc->init = mcimx7d_sabre_init; mc->max_cpus =FSL_IMX7_NUM_CPUS ; + mc->default_ram_id ="mcimx7d-sabre.ram" ; }DEFINE_MACHINE ("mcimx7d-sabre" , mcimx7d_sabre_machine_init)
Signature · 1 line
2.7.4
PATCH 24/86 arm:mps2-tz: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/mps2-tz.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
hw/arm/mps2-tz.c +9 -4
@@ -79,7 +79,6 @@ typedef struct {MachineState parent;ARMSSE iotkit; -MemoryRegion psram;MemoryRegion ssram[3 ];MemoryRegion ssram1_m;MPS2SCC scc;
@@ -388,6 +387,12 @@ static void mps2tz_common_init(MachineState *machine)exit (1 ); } +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +sysbus_init_child_obj (OBJECT (machine),"iotkit" , &mms->iotkit,sizeof (mms->iotkit), mmc->armsse_type); iotkitdev =DEVICE (&mms->iotkit);
@@ -458,9 +463,7 @@ static void mps2tz_common_init(MachineState *machine)* tradeoffs. For QEMU they're all just RAM, though. We arbitrarily * call the 16MB our "system memory", as it's the largest lump. */ -memory_region_allocate_system_memory (&mms->psram, -NULL ,"mps.ram" ,16 * MiB); -memory_region_add_subregion (system_memory,0x80000000 , &mms->psram); +memory_region_add_subregion (system_memory,0x80000000 , machine->ram);/* The overflow IRQs for all UARTs are ORed together. * Tx, Rx and "combined" IRQs are sent to the NVIC separately.
@@ -642,6 +645,7 @@ static void mps2tz_class_init(ObjectClass *oc, void *data) mc->init = mps2tz_common_init; iic->check = mps2_tz_idau_check; + mc->default_ram_id ="mps.ram" ; }static void mps2tz_an505_class_init (ObjectClass *oc,void *data)
@@ -657,6 +661,7 @@ static void mps2tz_an505_class_init(ObjectClass *oc, void *data) mc->default_cpu_type =ARM_CPU_TYPE_NAME ("cortex-m33" ); mmc->scc_id =0x41045050 ; mmc->armsse_type =TYPE_IOTKIT ; + mc->default_ram_size =16 * MiB; }static void mps2tz_an521_class_init (ObjectClass *oc,void *data)
Signature · 1 line
2.7.4
PATCH 25/86 arm:mps2: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/mps2.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
hw/arm/mps2.c +9 -4
@@ -55,7 +55,6 @@ typedef struct {MachineState parent;ARMv7MState armv7m; -MemoryRegion psram;MemoryRegion ssram1;MemoryRegion ssram1_m;MemoryRegion ssram23;
@@ -118,6 +117,12 @@ static void mps2_common_init(MachineState *machine)exit (1 ); } +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +/* The FPGA images have an odd combination of different RAMs, * because in hardware they are different implementations and * connected to different buses, giving varying performance/size
@@ -146,9 +151,7 @@ static void mps2_common_init(MachineState *machine)* This is of no use for QEMU so we don't implement it (as if * zbt_boot_ctrl is always zero). */ -memory_region_allocate_system_memory (&mms->psram, -NULL ,"mps.ram" ,16 * MiB); -memory_region_add_subregion (system_memory,0x21000000 , &mms->psram); +memory_region_add_subregion (system_memory,0x21000000 , machine->ram);switch (mmc->fpga_type) {case FPGA_AN385 :
@@ -338,6 +341,8 @@ static void mps2_class_init(ObjectClass *oc, void *data) mc->init = mps2_common_init; mc->max_cpus =1 ; + mc->default_ram_size =16 * MiB; + mc->default_ram_id ="mps.ram" ; }static void mps2_an385_class_init (ObjectClass *oc,void *data)
Signature · 1 line
2.7.4
PATCH 26/86 arm:musicpal: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/musicpal.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
hw/arm/musicpal.c +11 -5
@@ -1589,16 +1589,20 @@ static void musicpal_init(MachineState *machine)int i;unsigned long flash_size;DriveInfo *dinfo; +MachineClass *mc =MACHINE_GET_CLASS (machine);MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); +/* For now we use a fixed - the original - RAM size */ +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } + cpu =ARM_CPU (cpu_create (machine->cpu_type)); -/* For now we use a fixed - the original - RAM size */ -memory_region_allocate_system_memory (ram,NULL ,"musicpal.ram" , -MP_RAM_DEFAULT_SIZE ); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);memory_region_init_ram (sram,NULL ,"musicpal.sram" ,MP_SRAM_SIZE , &error_fatal);
@@ -1714,6 +1718,8 @@ static void musicpal_machine_init(MachineClass *mc) mc->init = musicpal_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm926" ); + mc->default_ram_size =MP_RAM_DEFAULT_SIZE ; + mc->default_ram_id ="musicpal.ram" ; }DEFINE_MACHINE ("musicpal" , musicpal_machine_init)
Signature · 1 line
2.7.4
PATCH 27/86 arm:nseries: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/nseries.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-)
hw/arm/nseries.c +18 -13
@@ -47,7 +47,6 @@/* Nokia N8x0 support */ struct n800_s { -MemoryRegion sdram;struct omap_mpu_state_s *mpu;struct rfbi_chip_s blizzard;
@@ -1311,13 +1310,18 @@ static void n8x0_init(MachineState *machine, struct arm_boot_info *binfo, int model) {struct n800_s *s = (struct n800_s *)g_malloc0 (sizeof (*s)); -uint64_t sdram_size = binfo->ram_size; +MachineClass *mc =MACHINE_GET_CLASS (machine); -memory_region_allocate_system_memory (&s->sdram,NULL ,"omap2.dram" , - sdram_size); -memory_region_add_subregion (get_system_memory (),OMAP2_Q2_BASE , &s->sdram); +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } + +memory_region_add_subregion (get_system_memory (),OMAP2_Q2_BASE , + machine->ram); - s->mpu =omap2420_mpu_init (&s->sdram, machine->cpu_type); + s->mpu =omap2420_mpu_init (machine->ram, machine->cpu_type);/* Setup peripherals *
@@ -1383,9 +1387,8 @@ static void n8x0_init(MachineState *machine,* * The code above is for loading the `zImage' file from Nokia * images. */ -load_image_targphys (option_rom[0 ].name, -OMAP2_Q2_BASE +0x400000 , - sdram_size -0x400000 ); +load_image_targphys (option_rom[0 ].name,OMAP2_Q2_BASE +0x400000 , + machine->ram_size -0x400000 );n800_setup_nolo_tags (nolo_tags);cpu_physical_memory_write (OMAP2_SRAM_BASE , nolo_tags,0x10000 );
@@ -1395,16 +1398,12 @@ static void n8x0_init(MachineState *machine,static struct arm_boot_info n800_binfo = { .loader_start =OMAP2_Q2_BASE , -/* Actually two chips of 0x4000000 bytes each */ - .ram_size =0x08000000 , .board_id =0x4f7 , .atag_board = n800_atag_setup, };static struct arm_boot_info n810_binfo = { .loader_start =OMAP2_Q2_BASE , -/* Actually two chips of 0x4000000 bytes each */ - .ram_size =0x08000000 ,/* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not * used by some older versions of the bootloader and 5555 is used * instead (including versions that shipped with many devices). */
@@ -1431,6 +1430,9 @@ static void n800_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="" ; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm1136-r2" ); +/* Actually two chips of 0x4000000 bytes each */ + mc->default_ram_size =0x08000000 ; + mc->default_ram_id ="omap2.dram" ; }static const TypeInfo n800_type = {
@@ -1448,6 +1450,9 @@ static void n810_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="" ; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm1136-r2" ); +/* Actually two chips of 0x4000000 bytes each */ + mc->default_ram_size =0x08000000 ; + mc->default_ram_id ="omap2.dram" ; }static const TypeInfo n810_type = {
Signature · 1 line
2.7.4
PATCH 28/86 arm:omap_sx1: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/omap_sx1.c | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
hw/arm/omap_sx1.c +13 -5
@@ -102,8 +102,8 @@ static struct arm_boot_info sx1_binfo = {static void sx1_init (MachineState *machine,const int version) {struct omap_mpu_state_s *mpu; +MachineClass *mc =MACHINE_GET_CLASS (machine);MemoryRegion *address_space =get_system_memory (); -MemoryRegion *dram =g_new (MemoryRegion,1 );MemoryRegion *flash =g_new (MemoryRegion,1 );MemoryRegion *cs =g_new (MemoryRegion,4 );static uint32_t cs0val =0x00213090 ;
@@ -115,15 +115,19 @@ static void sx1_init(MachineState *machine, const int version)uint32_t flash_size = flash0_size;int be; +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +if (version ==2 ) { flash_size = flash2_size; } -memory_region_allocate_system_memory (dram,NULL ,"omap1.dram" , - sx1_binfo.ram_size); -memory_region_add_subregion (address_space,OMAP_EMIFF_BASE , dram); +memory_region_add_subregion (address_space,OMAP_EMIFF_BASE , machine->ram); - mpu =omap310_mpu_init (dram, machine->cpu_type); + mpu =omap310_mpu_init (machine->ram, machine->cpu_type);/* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "omap_sx1.flash0-0", flash_size,
@@ -223,6 +227,8 @@ static void sx1_machine_v2_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v2; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("ti925t" ); + mc->default_ram_size = sdram_size; + mc->default_ram_id ="omap1.dram" ; }static const TypeInfo sx1_machine_v2_type = {
@@ -239,6 +245,8 @@ static void sx1_machine_v1_class_init(ObjectClass *oc, void *data) mc->init = sx1_init_v1; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("ti925t" ); + mc->default_ram_size = sdram_size; + mc->default_ram_id ="omap1.dram" ; }static const TypeInfo sx1_machine_v1_type = {
Signature · 1 line
2.7.4
PATCH 29/86 arm:palm: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/arm/palm.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
hw/arm/palm.c +12 -6
@@ -181,7 +181,6 @@ static void palmte_gpio_setup(struct omap_mpu_state_s *cpu)static struct arm_boot_info palmte_binfo = { .loader_start =OMAP_EMIFF_BASE , - .ram_size =0x02000000 , .board_id =0x331 , };
@@ -195,15 +194,20 @@ static void palmte_init(MachineState *machine)static uint32_t cs2val =0x0000e1a0 ;static uint32_t cs3val =0xe1a0e1a0 ;int rom_size, rom_loaded =0 ; -MemoryRegion *dram =g_new (MemoryRegion,1 ); +MachineClass *mc =MACHINE_GET_CLASS (machine);MemoryRegion *flash =g_new (MemoryRegion,1 );MemoryRegion *cs =g_new (MemoryRegion,4 ); -memory_region_allocate_system_memory (dram,NULL ,"omap1.dram" , - palmte_binfo.ram_size); -memory_region_add_subregion (address_space_mem,OMAP_EMIFF_BASE , dram); +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } + +memory_region_add_subregion (address_space_mem,OMAP_EMIFF_BASE , + machine->ram); - mpu =omap310_mpu_init (dram, machine->cpu_type); + mpu =omap310_mpu_init (machine->ram, machine->cpu_type);/* External Flash (EMIFS) */ memory_region_init_ram(flash, NULL, "palmte.flash", flash_size,
@@ -265,6 +269,8 @@ static void palmte_machine_init(MachineClass *mc) mc->init = palmte_init; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("ti925t" ); + mc->default_ram_size =0x02000000 ; + mc->default_ram_id ="omap1.dram" ; }DEFINE_MACHINE ("cheetah" , palmte_machine_init)
Signature · 1 line
2.7.4
PATCH 30/86 arm:raspi: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
remove no longer needed RasPiState
--- hw/arm/raspi.c | 34 +++++++++++++--------------------- 1 file changed, 13 insertions(+), 21 deletions(-)
hw/arm/raspi.c +13 -21
@@ -32,11 +32,6 @@/* Table of Linux board IDs for different Pi versions */ static const int raspi_boardid[] = {[1 ] =0xc42 , [2 ] =0xc43 , [3 ] =0xc44 }; -typedef struct RasPiState { -BCM283XState soc; -MemoryRegion ram; -}RasPiState ; -static void write_smpboot (ARMCPU *cpu,const struct arm_boot_info *info) {static const uint32_t smpboot[] = {
@@ -166,7 +161,7 @@ static void setup_boot(MachineState *machine, int version, size_t ram_size)static void raspi_init (MachineState *machine,int version) { -RasPiState *s =g_new0 (RasPiState,1 ); +Object *soc;uint32_t vcram_size;DriveInfo *di;BlockBackend *blk;
@@ -179,30 +174,26 @@ static void raspi_init(MachineState *machine, int version)exit (1 ); } -object_initialize_child (OBJECT (machine),"soc" , &s->soc,sizeof (s->soc), - version ==3 ?TYPE_BCM2837 :TYPE_BCM2836 , - &error_abort,NULL ); + soc =object_new (version ==3 ?TYPE_BCM2837 :TYPE_BCM2836 ); +object_property_add_child (OBJECT (machine),"soc" , soc, &error_fatal); -/* Allocate and map RAM */ -memory_region_allocate_system_memory (&s->ram,OBJECT (machine),"ram" , - machine->ram_size);/* FIXME: Remove when we have custom CPU address space support */ -memory_region_add_subregion_overlap (get_system_memory (),0 , &s->ram,0 ); +memory_region_add_subregion_overlap (get_system_memory (),0 , + machine->ram,0 );/* Setup the SOC */ -object_property_add_const_link (OBJECT (&s->soc),"ram" ,OBJECT (&s->ram), +object_property_add_const_link (soc,"ram" ,OBJECT (machine->ram), &error_abort); -object_property_set_int (OBJECT (&s->soc), machine->smp.cpus,"enabled-cpus" , +object_property_set_int (soc, machine->smp.cpus,"enabled-cpus" , &error_abort);int board_rev = version ==3 ?0xa02082 :0xa21041 ; -object_property_set_int (OBJECT (&s->soc), board_rev,"board-rev" , - &error_abort); -object_property_set_bool (OBJECT (&s->soc), true,"realized" , &error_abort); +object_property_set_int (soc, board_rev,"board-rev" , &error_abort); +object_property_set_bool (soc, true,"realized" , &error_abort);/* Create and plug in the SD cards */ di =drive_get_next (IF_SD ); blk = di ?blk_by_legacy_dinfo (di) :NULL ; - bus =qdev_get_child_bus (DEVICE (&s->soc),"sd-bus" ); + bus =qdev_get_child_bus (DEVICE (soc),"sd-bus" );if (bus ==NULL ) {error_report ("No SD bus found in SOC object" );exit (1 );
@@ -211,8 +202,7 @@ static void raspi_init(MachineState *machine, int version)qdev_prop_set_drive (carddev,"drive" , blk, &error_fatal);object_property_set_bool (OBJECT (carddev), true,"realized" , &error_fatal); - vcram_size =object_property_get_uint (OBJECT (&s->soc),"vcram-size" , - &error_abort); + vcram_size =object_property_get_uint (soc,"vcram-size" , &error_abort);setup_boot (machine, version, machine->ram_size - vcram_size); }
@@ -233,6 +223,7 @@ static void raspi2_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; + mc->default_ram_id ="ram" ; mc->ignore_memory_transaction_failures = true; };DEFINE_MACHINE ("raspi2" , raspi2_machine_init)
@@ -255,6 +246,7 @@ static void raspi3_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; + mc->default_ram_id ="ram" ; } DEFINE_MACHINE("raspi3", raspi3_machine_init)#endif
Signature · 1 line
2.7.4
PATCH 31/86 arm:sabrelite: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
remove no longer needed IMX6Sabrelite
--- hw/arm/sabrelite.c | 23 ++++++++--------------- 1 file changed, 8 insertions(+), 15 deletions(-)
hw/arm/sabrelite.c +8 -15
@@ -19,11 +19,6 @@#include "qemu/error-report.h" #include "sysemu/qtest.h" -typedef struct IMX6Sabrelite { -FslIMX6State soc; -MemoryRegion ram; -}IMX6Sabrelite ; -static struct arm_boot_info sabrelite_binfo = {/* DDR memory start */ .loader_start =FSL_IMX6_MMDC_ADDR ,
@@ -45,7 +40,7 @@ static void sabrelite_reset_secondary(ARMCPU *cpu,static void sabrelite_init (MachineState *machine) { -IMX6Sabrelite *s =g_new0 (IMX6Sabrelite,1 ); +FslIMX6State *s;Error *err =NULL ;/* Check the amount of memory is compatible with the SOC */
@@ -55,19 +50,16 @@ static void sabrelite_init(MachineState *machine)exit (1 ); } -object_initialize_child (OBJECT (machine),"soc" , &s->soc,sizeof (s->soc), -TYPE_FSL_IMX6 , &error_abort,NULL ); - -object_property_set_bool (OBJECT (&s->soc), true,"realized" , &err); + s =FSL_IMX6 (object_new (TYPE_FSL_IMX6 )); +object_property_add_child (OBJECT (machine),"soc" ,OBJECT (s), &error_fatal); +object_property_set_bool (OBJECT (s), true,"realized" , &err);if (err !=NULL ) {error_report ("%s" ,error_get_pretty (err));exit (1 ); } -memory_region_allocate_system_memory (&s->ram,NULL ,"sabrelite.ram" , - machine->ram_size);memory_region_add_subregion (get_system_memory (),FSL_IMX6_MMDC_ADDR , - &s->ram); + machine->ram); {/*
@@ -78,7 +70,7 @@ static void sabrelite_init(MachineState *machine)/* Add the sst25vf016b NOR FLASH memory to first SPI */ Object *spi_dev; - spi_dev =object_resolve_path_component (OBJECT (&s->soc),"spi1" ); + spi_dev =object_resolve_path_component (OBJECT (s),"spi1" );if (spi_dev) {SSIBus *spi_bus;
@@ -109,7 +101,7 @@ static void sabrelite_init(MachineState *machine) sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;if (!qtest_enabled ()) { -arm_load_kernel (&s->soc.cpu[0 ], machine, &sabrelite_binfo); +arm_load_kernel (&s->cpu[0 ], machine, &sabrelite_binfo); } }
@@ -119,6 +111,7 @@ static void sabrelite_machine_init(MachineClass *mc) mc->init = sabrelite_init; mc->max_cpus =FSL_IMX6_NUM_CPUS ; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="sabrelite.ram" ; }DEFINE_MACHINE ("sabrelite" , sabrelite_machine_init)
Signature · 1 line
2.7.4
PATCH 32/86 arm:sbsa-ref: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/sbsa-ref.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
hw/arm/sbsa-ref.c +3 -4
@@ -593,7 +593,6 @@ static void sbsa_ref_init(MachineState *machine)MachineClass *mc =MACHINE_GET_CLASS (machine);MemoryRegion *sysmem =get_system_memory ();MemoryRegion *secure_sysmem =g_new (MemoryRegion,1 ); -MemoryRegion *ram =g_new (MemoryRegion,1 );bool firmware_loaded;const CPUArchIdList *possible_cpus;int n, sbsa_max_cpus;
@@ -685,9 +684,8 @@ static void sbsa_ref_init(MachineState *machine)object_unref (cpuobj); } -memory_region_allocate_system_memory (ram,NULL ,"sbsa-ref.ram" , - machine->ram_size); -memory_region_add_subregion (sysmem, sbsa_ref_memmap[SBSA_MEM ].base, ram); +memory_region_add_subregion (sysmem, sbsa_ref_memmap[SBSA_MEM ].base, + machine->ram);create_fdt (sms);
@@ -785,6 +783,7 @@ static void sbsa_ref_class_init(ObjectClass *oc, void *data) mc->block_default_type =IF_IDE ; mc->no_cdrom =1 ; mc->default_ram_size =1 * GiB; + mc->default_ram_id ="sbsa-ref.ram" ; mc->default_cpus =4 ; mc->possible_cpu_arch_ids = sbsa_ref_possible_cpu_arch_ids; mc->cpu_index_to_instance_props = sbsa_ref_cpu_index_to_props;
Signature · 1 line
2.7.4
PATCH 33/86 arm:versatilepb: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/versatilepb.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
hw/arm/versatilepb.c +3 -4
@@ -184,7 +184,6 @@ static void versatile_init(MachineState *machine, int board_id)Object *cpuobj;ARMCPU *cpu;MemoryRegion *sysmem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );qemu_irq pic[32 ];qemu_irq sic[32 ];DeviceState *dev, *sysctl;
@@ -220,11 +219,9 @@ static void versatile_init(MachineState *machine, int board_id) cpu =ARM_CPU (cpuobj); -memory_region_allocate_system_memory (ram,NULL ,"versatile.ram" , - machine->ram_size);/* ??? RAM should repeat to fill physical memory space. */ /* SDRAM at address zero. */ -memory_region_add_subregion (sysmem,0 , ram); +memory_region_add_subregion (sysmem,0 , machine->ram); sysctl =qdev_create (NULL ,"realview_sysctl" );qdev_prop_set_uint32 (sysctl,"sys_id" ,0x41007004 );
@@ -398,6 +395,7 @@ static void versatilepb_class_init(ObjectClass *oc, void *data) mc->block_default_type =IF_SCSI ; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm926" ); + mc->default_ram_id ="versatile.ram" ; }static const TypeInfo versatilepb_type = {
@@ -415,6 +413,7 @@ static void versatileab_class_init(ObjectClass *oc, void *data) mc->block_default_type =IF_SCSI ; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("arm926" ); + mc->default_ram_id ="versatile.ram" ; }static const TypeInfo versatileab_type = {
Signature · 1 line
2.7.4
PATCH 34/86 arm:vexpress: use memdev for RAM
In reply to Igor Mammedovreplace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/vexpress.c | 14 +++++--------- 1 file changed, 5 insertions(+), 9 deletions(-)
hw/arm/vexpress.c +5 -9
@@ -273,7 +273,6 @@ static void a9_daughterboard_init(const VexpressMachineState *vms, {MachineState *machine =MACHINE (vms);MemoryRegion *sysmem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *lowram =g_new (MemoryRegion,1 );ram_addr_t low_ram_size;
@@ -283,8 +282,6 @@ static void a9_daughterboard_init(const VexpressMachineState *vms,exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"vexpress.highmem" , - ram_size); low_ram_size = ram_size;if (low_ram_size >0x4000000 ) { low_ram_size =0x4000000 ;
@@ -293,9 +290,10 @@ static void a9_daughterboard_init(const VexpressMachineState *vms,* address space should in theory be remappable to various * things including ROM or RAM; we always map the RAM there. */ -memory_region_init_alias (lowram,NULL ,"vexpress.lowmem" , ram,0 , low_ram_size); +memory_region_init_alias (lowram,NULL ,"vexpress.lowmem" , machine->ram, +0 , low_ram_size);memory_region_add_subregion (sysmem,0x0 , lowram); -memory_region_add_subregion (sysmem,0x60000000 , ram); +memory_region_add_subregion (sysmem,0x60000000 , machine->ram);/* 0x1e000000 A9MPCore (SCU) private memory region */ init_cpus(machine, cpu_type, TYPE_A9MPCORE_PRIV, 0x1e000000, pic,
@@ -360,7 +358,6 @@ static void a15_daughterboard_init(const VexpressMachineState *vms, {MachineState *machine =MACHINE (vms);MemoryRegion *sysmem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); {
@@ -375,10 +372,8 @@ static void a15_daughterboard_init(const VexpressMachineState *vms, } } -memory_region_allocate_system_memory (ram,NULL ,"vexpress.highmem" , - ram_size);/* RAM is from 0x80000000 upwards; there is no low-memory alias for it. */ -memory_region_add_subregion (sysmem,0x80000000 , ram); +memory_region_add_subregion (sysmem,0x80000000 , machine->ram);/* 0x2c000000 A15MPCore private memory region (GIC) */ init_cpus(machine, cpu_type, TYPE_A15MPCORE_PRIV,
@@ -795,6 +790,7 @@ static void vexpress_class_init(ObjectClass *oc, void *data) mc->init = vexpress_common_init; mc->max_cpus =4 ; mc->ignore_memory_transaction_failures = true; + mc->default_ram_id ="vexpress.highmem" ; }static void vexpress_a9_class_init (ObjectClass *oc,void *data)
Signature · 1 line
2.7.4
PATCH 35/86 arm:virt: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and then map memory region provided by
MachineState::ram_memdev
--- hw/arm/virt.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
hw/arm/virt.c +3 -4
@@ -1512,7 +1512,6 @@ static void machvirt_init(MachineState *machine)MemoryRegion *sysmem =get_system_memory ();MemoryRegion *secure_sysmem =NULL ;int n, virt_max_cpus; -MemoryRegion *ram =g_new (MemoryRegion,1 );bool firmware_loaded;bool aarch64 = true;bool has_ged = !vmc->no_ged;
@@ -1701,9 +1700,8 @@ static void machvirt_init(MachineState *machine) } } -memory_region_allocate_system_memory (ram,NULL ,"mach-virt.ram" , - machine->ram_size); -memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, ram); +memory_region_add_subregion (sysmem, vms->memmap[VIRT_MEM ].base, + machine->ram);if (machine->device_memory) {memory_region_add_subregion (sysmem, machine->device_memory->base, &machine->device_memory->mr);
@@ -2053,6 +2051,7 @@ static void virt_machine_class_init(ObjectClass *oc, void *data) hc->unplug_request = virt_machine_device_unplug_request_cb; mc->numa_mem_supported = true; mc->auto_enable_numa_with_memhp = true; + mc->default_ram_id ="mach-virt.ram" ; }static void virt_instance_init (Object *obj)
Signature · 1 line
2.7.4
PATCH 36/86 arm:xilinx_zynq: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- hw/arm/xilinx_zynq.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
hw/arm/xilinx_zynq.c +8 -8
@@ -158,7 +158,6 @@ static inline void zynq_init_spi_flashes(uint32_t base_addr, qemu_irq irq,static void zynq_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;ARMCPU *cpu;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *ext_ram =g_new (MemoryRegion,1 );
@@ -168,6 +167,12 @@ static void zynq_init(MachineState *machine)qemu_irq pic[64 ];int n; +/* max 2GB ram */ +if (machine->ram_size >0x80000000 ) { +error_report ("RAM size more than %d is not supported" ,0x80000000 ); +exit (EXIT_FAILURE ); + } + cpu =ARM_CPU (object_new (machine->cpu_type));/* By default A9 CPUs have EL3 enabled. This board does not
@@ -184,14 +189,9 @@ static void zynq_init(MachineState *machine) &error_fatal);object_property_set_bool (OBJECT (cpu), true,"realized" , &error_fatal); -/* max 2GB ram */ -if (ram_size >0x80000000 ) { - ram_size =0x80000000 ; - } -/* DDR remapped to address zero. */ memory_region_allocate_system_memory (ext_ram,NULL ,"zynq.ext_ram" , - ram_size); + machine->ram_size);memory_region_add_subregion (address_space_mem,0 , ext_ram);/* 256K of on-chip memory */
@@ -300,7 +300,7 @@ static void zynq_init(MachineState *machine)sysbus_connect_irq (busdev,0 , pic[40 -IRQ_OFFSET ]);sysbus_mmio_map (busdev,0 ,0xF8007000 ); - zynq_binfo.ram_size = ram_size; + zynq_binfo.ram_size = machine->ram_size; zynq_binfo.nb_cpus =1 ; zynq_binfo.board_id =0xd32 ; zynq_binfo.loader_start =0 ;
Signature · 1 line
2.7.4
PATCH 37/86 arm:xilinx_zynq: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/xilinx_zynq.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
hw/arm/xilinx_zynq.c +2 -4
@@ -160,7 +160,6 @@ static void zynq_init(MachineState *machine) {ARMCPU *cpu;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ext_ram =g_new (MemoryRegion,1 );MemoryRegion *ocm_ram =g_new (MemoryRegion,1 );DeviceState *dev;SysBusDevice *busdev;
@@ -190,9 +189,7 @@ static void zynq_init(MachineState *machine)object_property_set_bool (OBJECT (cpu), true,"realized" , &error_fatal);/* DDR remapped to address zero. */ -memory_region_allocate_system_memory (ext_ram,NULL ,"zynq.ext_ram" , - machine->ram_size); -memory_region_add_subregion (address_space_mem,0 , ext_ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* 256K of on-chip memory */ memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 * KiB,
@@ -318,6 +315,7 @@ static void zynq_machine_init(MachineClass *mc) mc->no_sdcard =1 ; mc->ignore_memory_transaction_failures = true; mc->default_cpu_type =ARM_CPU_TYPE_NAME ("cortex-a9" ); + mc->default_ram_id ="zynq.ext_ram" ; }DEFINE_MACHINE ("xilinx-zynq-a9" , zynq_machine_init)
Signature · 1 line
2.7.4
PATCH 38/86 arm:xlnx-versal-virt: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/xlnx-versal-virt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
hw/arm/xlnx-versal-virt.c +2 -5
@@ -30,7 +30,6 @@ typedef struct VersalVirt {MachineState parent_obj;Versal soc; -MemoryRegion mr_ddr;void *fdt;int fdt_size;
@@ -414,12 +413,9 @@ static void versal_virt_init(MachineState *machine) psci_conduit =QEMU_PSCI_CONDUIT_SMC ; } -memory_region_allocate_system_memory (&s->mr_ddr,NULL ,"ddr" , - machine->ram_size); -sysbus_init_child_obj (OBJECT (machine),"xlnx-ve" , &s->soc,sizeof (s->soc),TYPE_XLNX_VERSAL ); -object_property_set_link (OBJECT (&s->soc),OBJECT (&s->mr_ddr), +object_property_set_link (OBJECT (&s->soc),OBJECT (machine->ram),"ddr" , &error_abort);object_property_set_int (OBJECT (&s->soc), psci_conduit,"psci-conduit" , &error_abort);
@@ -473,6 +469,7 @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->max_cpus =XLNX_VERSAL_NR_ACPUS ; mc->default_cpus =XLNX_VERSAL_NR_ACPUS ; mc->no_cdrom = true; + mc->default_ram_id ="ddr" ; }static const TypeInfo versal_virt_machine_init_typeinfo = {
Signature · 1 line
2.7.4
Re: [PATCH 38/86] arm:xlnx-versal-virt: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 39 lines
--- hw/arm/xlnx-versal-virt.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)hw/arm/xlnx-versal-virt.c +2
-5@@ -30,7 +30,6 @@ typedef struct VersalVirt {MachineState parent_obj;Versal soc; -MemoryRegion mr_ddr;void *fdt;int fdt_size;@@ -414,12 +413,9 @@ static void versal_virt_init(MachineState *machine) psci_conduit =QEMU_PSCI_CONDUIT_SMC ; } -memory_region_allocate_system_memory (&s->mr_ddr,NULL ,"ddr" , - machine->ram_size); -sysbus_init_child_obj (OBJECT (machine),"xlnx-ve" , &s->soc,sizeof (s->soc),TYPE_XLNX_VERSAL ); -object_property_set_link (OBJECT (&s->soc),OBJECT (&s->mr_ddr), +object_property_set_link (OBJECT (&s->soc),OBJECT (machine->ram),"ddr" , &error_abort);object_property_set_int (OBJECT (&s->soc), psci_conduit,"psci-conduit" , &error_abort);@@ -473,6 +469,7 @@ static void versal_virt_machine_class_init(ObjectClass *oc, void *data) mc->max_cpus =XLNX_VERSAL_NR_ACPUS ; mc->default_cpus =XLNX_VERSAL_NR_ACPUS ; mc->no_cdrom = true; + mc->default_ram_id ="ddr" ; }static const TypeInfo versal_virt_machine_init_typeinfo = {
PATCH 39/86 arm:xlnx-zcu102: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/arm/xlnx-zcu102.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
hw/arm/xlnx-zcu102.c +2 -5
@@ -28,7 +28,6 @@ typedef struct XlnxZCU102 {MachineState parent_obj;XlnxZynqMPState soc; -MemoryRegion ddr_ram;bool secure;bool virt;
@@ -87,13 +86,10 @@ static void xlnx_zcu102_init(MachineState *machine) ram_size); } -memory_region_allocate_system_memory (&s->ddr_ram,NULL ,"ddr-ram" , - ram_size); -object_initialize_child (OBJECT (machine),"soc" , &s->soc,sizeof (s->soc),TYPE_XLNX_ZYNQMP , &error_abort,NULL ); -object_property_set_link (OBJECT (&s->soc),OBJECT (&s->ddr_ram), +object_property_set_link (OBJECT (&s->soc),OBJECT (machine->ram),"ddr-ram" , &error_abort);object_property_set_bool (OBJECT (&s->soc), s->secure,"secure" , &error_fatal);
@@ -211,6 +207,7 @@ static void xlnx_zcu102_machine_class_init(ObjectClass *oc, void *data) mc->ignore_memory_transaction_failures = true; mc->max_cpus =XLNX_ZYNQMP_NUM_APU_CPUS +XLNX_ZYNQMP_NUM_RPU_CPUS ; mc->default_cpus =XLNX_ZYNQMP_NUM_APU_CPUS ; + mc->default_ram_id ="ddr-ram" ; }static const TypeInfo xlnx_zcu102_machine_init_typeinfo = {
Signature · 1 line
2.7.4
PATCH 40/86 s390x:s390-virtio-ccw: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/s390x/s390-virtio-ccw.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
hw/s390x/s390-virtio-ccw.c +3 -4
@@ -154,14 +154,12 @@ static void virtio_ccw_register_hcalls(void) virtio_ccw_hcall_early_printk); } -static void s390_memory_init (ram_addr_t mem_size) +static void s390_memory_init (MemoryRegion *ram) {MemoryRegion *sysmem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );Error *local_err =NULL ;/* allocate RAM for core */ -memory_region_allocate_system_memory (ram,NULL ,"s390.ram" , mem_size);memory_region_add_subregion (sysmem,0 , ram);/*
@@ -245,7 +243,7 @@ static void ccw_init(MachineState *machine)s390_sclp_init ();/* init memory + setup max page size. Required for the CPU model */ -s390_memory_init (machine->ram_size); +s390_memory_init (machine->ram);/* init CPUs (incl. CPU model) early so s390_has_feature() works */ s390_init_cpus (machine);
@@ -471,6 +469,7 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data) hc->plug = s390_machine_device_plug; hc->unplug_request = s390_machine_device_unplug_request; nc->nmi_monitor_handler = s390_nmi; + mc->default_ram_id ="s390.ram" ; }static inline bool machine_get_aes_key_wrap (Object *obj,Error **errp)
Signature · 1 line
2.7.4
PATCH 41/86 null-machine: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/core/null-machine.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
hw/core/null-machine.c +3 -5
@@ -32,11 +32,8 @@ static void machine_none_init(MachineState *mch) }/* RAM at address zero */ -if (mch->ram_size) { -MemoryRegion *ram =g_new (MemoryRegion,1 ); - -memory_region_allocate_system_memory (ram,NULL ,"ram" , mch->ram_size); -memory_region_add_subregion (get_system_memory (),0 , ram); +if (mch->ram) { +memory_region_add_subregion (get_system_memory (),0 , mch->ram); }if (mch->kernel_filename) {
@@ -52,6 +49,7 @@ static void machine_none_machine_init(MachineClass *mc) mc->init = machine_none_init; mc->max_cpus =1 ; mc->default_ram_size =0 ; + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("none" , machine_none_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 41/86] null-machine: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 31 lines
--- hw/core/null-machine.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)hw/core/null-machine.c +3
-5@@ -32,11 +32,8 @@ static void machine_none_init(MachineState *mch) }/* RAM at address zero */ -if (mch->ram_size) { -MemoryRegion *ram =g_new (MemoryRegion,1 ); - -memory_region_allocate_system_memory (ram,NULL ,"ram" , mch->ram_size); -memory_region_add_subregion (get_system_memory (),0 , ram); +if (mch->ram) { +memory_region_add_subregion (get_system_memory (),0 , mch->ram); }if (mch->kernel_filename) {@@ -52,6 +49,7 @@ static void machine_none_machine_init(MachineClass *mc) mc->init = machine_none_init; mc->max_cpus =1 ; mc->default_ram_size =0 ; + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("none" , machine_none_machine_init)
PATCH 42/86 cris:axis_dev88: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/cris/axis_dev88.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
hw/cris/axis_dev88.c +2 -6
@@ -249,7 +249,6 @@ static struct cris_load_info li;static void axisdev88_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;CRISCPU *cpu;
@@ -262,17 +261,13 @@ void axisdev88_init(MachineState *machine)struct etraxfs_dma_client *dma_eth;int i;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *phys_ram =g_new (MemoryRegion,1 );MemoryRegion *phys_intmem =g_new (MemoryRegion,1 );/* init CPUs */ cpu =CRIS_CPU (cpu_create (machine->cpu_type)); env = &cpu->env; -/* allocate RAM */ -memory_region_allocate_system_memory (phys_ram,NULL ,"axisdev88.ram" , - ram_size); -memory_region_add_subregion (address_space_mem,0x40000000 , phys_ram); +memory_region_add_subregion (address_space_mem,0x40000000 , machine->ram);/* The ETRAX-FS has 128Kb on chip ram, the docs refer to it as the internal memory. */
@@ -355,6 +350,7 @@ static void axisdev88_machine_init(MachineClass *mc) mc->init = axisdev88_init; mc->is_default =1 ; mc->default_cpu_type =CRIS_CPU_TYPE_NAME ("crisv32" ); + mc->default_ram_id ="axisdev88.ram" ; }DEFINE_MACHINE ("axis-dev88" , axisdev88_machine_init)
Signature · 1 line
2.7.4
PATCH 43/86 hppa: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
hw/hppa/machine.c +2 -1
@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine)/* Limit main memory. */ if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +exit (EXIT_FAILURE ); }/* Main memory region. */
Signature · 1 line
2.7.4
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +1
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine)/* Limit main memory. */ if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +error_report ("RAM size more than %d is not supported" ,FIRMWARE_START );
$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supported
Instead of using qemu_strtosz_MiB on FIRMWARE_START or unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?
With correct output:
Quoted 5 lines
hw/hppa/machine.c +1
-0+exit (EXIT_FAILURE ); }/* Main memory region. */
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
hw/hppa/machine.c| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supported
Quoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?
I don't really like that change.
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
So, I think that patch is - although it's more correct - not a benefit for the end user.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Quoted 5 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 44 lines · Philippe Mathieu-Daudé
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
hw/hppa/machine.c| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); + exit(EXIT_FAILURE);$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Quoted 3 lines
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
If you put 4GB physically in the box, you wouldn't get a warning either... It will simply use just 3841MB.
Quoted 3 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Yes, I think so.
Quoted 2 lines
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Sounds like the best solution.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 49 lines · On Thu, 2 Jan 2020 14:02:01 +0100 Helge Deller <[email protected]> wrote:
Quoted 44 lines · Philippe Mathieu-Daudé
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
hw/hppa/machine.c| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); + exit(EXIT_FAILURE);$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Quoted 3 lines
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
Quoted 8 lines
If you put 4GB physically in the box, you wouldn't get a warning either... It will simply use just 3841MB.
Quoted 3 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Yes, I think so.
Question is if is it supported/used in current impl?
If it's not then lets keep a hard error providing the exact max value, instead of complicating code for unclear benefit.
Quoted 8 lines
Quoted 3 lines
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Sounds like the best solution.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
In reply to Philippe Mathieu-DaudéQuoted 44 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Quoted 8 lines
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/
Quoted 7 lines
Quoted 5 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 50 lines · Igor Mammedov
Quoted 47 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
Quoted 8 lines
Quoted 5 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/
Works for me! You can keep my R-b with this change, thanks.
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 54 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 53 lines · Igor Mammedov
Quoted 50 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Quoted 7 lines
Quoted 5 lines
Quoted 2 lines
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/Works for me! You can keep my R-b with this change, thanks.
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?
Quoted 9 lines
Quoted 8 lines
Quoted 7 lines
Quoted 5 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 63 lines · Igor Mammedov
Quoted 60 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 58 lines · Igor Mammedov
Quoted 44 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Quoted 8 lines
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/
Quoted 7 lines
Quoted 1 line
Works for me! You can keep my R-b with this change, thanks.
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?
I was thinking about this patch:
-- >8 --
hw/hppa/machine.c +4 -3
@@ -91,15 +91,16 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +if (ram_size >4 * GiB) { +error_report ("Can not model more than 4GB of RAM" ); +exit (EXIT_FAILURE ); }/* Main memory region. */ ram_region =g_new (MemoryRegion,1 );memory_region_allocate_system_memory (ram_region,OBJECT (machine),"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion_overlap (addr_space,0 , ram_region,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);
---
$ hppa-softmmu/qemu-system-hppa -m 3840m -S -monitor stdio
QEMU 4.2.50 monitor - type 'help' for more information
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-00000000efffffff (prio -1, ram): ram
00000000f0000000-00000000f07fffff (prio 0, ram): firmware
00000000f9000000-00000000f90007ff (prio 0, i/o): isa-io
00000000f9000020-00000000f9000021 (prio 0, i/o): pic
00000000f9000070-00000000f9000071 (prio 0, i/o): rtc
00000000f9000070-00000000f9000070 (prio 0, i/o): rtc-index
00000000f90000a0-00000000f90000a1 (prio 0, i/o): pic
00000000f90004d0-00000000f90004d0 (prio 0, i/o): elcr
00000000f90004d1-00000000f90004d1 (prio 0, i/o): elcr
00000000fff80000-00000000fff80fff (prio 0, i/o): dino
00000000fff80064-00000000fff80067 (prio 0, i/o): pci-conf-idx
00000000fff80068-00000000fff8006b (prio 0, i/o): pci-conf-data
00000000fff83800-00000000fff83807 (prio 0, i/o): serial
00000000fffb0000-00000000fffb0003 (prio 0, i/o): cpu0-io-eirRe: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 66 lines · On Thu, 2 Jan 2020 16:49:00 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 65 lines · Igor Mammedov
Quoted 61 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 50 lines · Igor Mammedov
Quoted 47 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
Quoted 8 lines
Quoted 5 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/Works for me! You can keep my R-b with this change, thanks.
Quoted 7 lines
Quoted 5 lines
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?I was thinking about this patch:
it probably should be a bit more complicated.
Quoted 16 lines
-- >8 --
hw/hppa/machine.c +3
-2@@ -91,15 +91,16 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +if (ram_size >4 * GiB) { +error_report ("Can not model more than 4GB of RAM" ); +exit (EXIT_FAILURE ); }
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 106
Quoted 10 lines
hw/hppa/machine.c +1
-1/* Main memory region. */ ram_region =g_new (MemoryRegion,1 );memory_region_allocate_system_memory (ram_region,OBJECT (machine),"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion_overlap (addr_space,0 , ram_region,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);
Ok, I give up on trying to convince you to avoid relaxing error check but I'd make it an extra patch on top of "[PATCH 43/86] hppa: drop RAM size fixup" as it's a separate change.
Quoted 22 lines
---
$ hppa-softmmu/qemu-system-hppa -m 3840m -S -monitor stdio QEMU 4.2.50 monitor - type 'help' for more information (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-00000000efffffff (prio -1, ram): ram 00000000f0000000-00000000f07fffff (prio 0, ram): firmware 00000000f9000000-00000000f90007ff (prio 0, i/o): isa-io 00000000f9000020-00000000f9000021 (prio 0, i/o): pic 00000000f9000070-00000000f9000071 (prio 0, i/o): rtc 00000000f9000070-00000000f9000070 (prio 0, i/o): rtc-index 00000000f90000a0-00000000f90000a1 (prio 0, i/o): pic 00000000f90004d0-00000000f90004d0 (prio 0, i/o): elcr 00000000f90004d1-00000000f90004d1 (prio 0, i/o): elcr 00000000fff80000-00000000fff80fff (prio 0, i/o): dino 00000000fff80064-00000000fff80067 (prio 0, i/o): pci-conf-idx 00000000fff80068-00000000fff8006b (prio 0, i/o): pci-conf-data 00000000fff83800-00000000fff83807 (prio 0, i/o): serial 00000000fffb0000-00000000fffb0003 (prio 0, i/o): cpu0-io-eir
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 102 lines · Igor Mammedov
Quoted 66 lines · On Thu, 2 Jan 2020 16:49:00 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 65 lines · Igor Mammedov
Quoted 61 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 50 lines · Igor Mammedov
Quoted 47 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
Quoted 8 lines
Quoted 5 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/Works for me! You can keep my R-b with this change, thanks.
Quoted 7 lines
Quoted 5 lines
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?I was thinking about this patch:
it probably should be a bit more complicated.
Quoted 24 lines
-- >8 --
hw/hppa/machine.c +4
-3@@ -91,15 +91,16 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +if (ram_size >4 * GiB) { +error_report ("Can not model more than 4GB of RAM" ); +exit (EXIT_FAILURE ); }/* Main memory region. */ ram_region =g_new (MemoryRegion,1 );memory_region_allocate_system_memory (ram_region,OBJECT (machine),"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion_overlap (addr_space,0 , ram_region,-1 );
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 106
Quoted 2 lines
hw/hppa/machine.c +0
-0/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);Ok, I give up on trying to convince you to avoid relaxing error check but I'd make it an extra patch on top of "[PATCH 43/86] hppa: drop RAM size fixup" as it's a separate change.
I am simply not understanding what you are suggesting... Can you share a diff snippet of what you would prefer?
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 110 lines · On Thu, 2 Jan 2020 18:14:32 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 102 lines · Igor Mammedov
Quoted 66 lines · On Thu, 2 Jan 2020 16:49:00 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 65 lines · Igor Mammedov
Quoted 61 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 50 lines · Igor Mammedov
Quoted 47 lines · On Thu, 2 Jan 2020 13:06:33 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 35 lines · Helge Deller
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
Quoted 8 lines
Quoted 5 lines
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/Works for me! You can keep my R-b with this change, thanks.
Quoted 7 lines
Quoted 5 lines
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?I was thinking about this patch:
it probably should be a bit more complicated.
Quoted 24 lines
-- >8 --
hw/hppa/machine.c +4
-3@@ -91,15 +91,16 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +if (ram_size >4 * GiB) { +error_report ("Can not model more than 4GB of RAM" ); +exit (EXIT_FAILURE ); }/* Main memory region. */ ram_region =g_new (MemoryRegion,1 );memory_region_allocate_system_memory (ram_region,OBJECT (machine),"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion_overlap (addr_space,0 , ram_region,-1 );Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 106
Quoted 2 lines
hw/hppa/machine.c +0
-0/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);Ok, I give up on trying to convince you to avoid relaxing error check but I'd make it an extra patch on top of "[PATCH 43/86] hppa: drop RAM size fixup" as it's a separate change.
Quoted 3 lines
I am simply not understanding what you are suggesting... Can you share a diff snippet of what you would prefer?
My preference is to error out with:
"RAM size more than 3840m is not supported"
and let user fix their CLI
Re: [PATCH 43/86] hppa: drop RAM size fixup
In reply to Philippe Mathieu-DaudéQuoted 89 lines · Philippe Mathieu-Daudé
Quoted 63 lines · Igor Mammedov
Quoted 60 lines · On Thu, 2 Jan 2020 15:17:14 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 58 lines · Igor Mammedov
On Thu, 2 Jan 2020 13:06:33 +0100
Philippe Mathieu-Daudé <[email protected]> wrote:Quoted 44 lines · Helge Deller
Quoted 35 lines · Philippe Mathieu-Daudé
Quoted 30 lines · Igor Mammedov
Quoted 18 lines
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
hw/hppa/machine.c| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); + exit(EXIT_FAILURE);$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?I don't really like that change.
Quoted 7 lines
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".Quoted 8 lines
Thanks for the explanation. This deserves a comment in the source file IMHO (and displaying a warning to the user that the behavior is changed).
I understand the CPU can't access this DRAM area because the ROM is mapped there. What about other devices, can they do DMA access to it?
Igor: If this complicates your series too much, I think we can directly allocate up-to 4GiB and not worry about the 256MiB lost.
Do you mean
s/"RAM size more than %d is not supported"/"RAM size more than 4Gb is not supported"/Quoted 7 lines
Quoted 1 line
Works for me! You can keep my R-b with this change, thanks.
Well, it's not that simple.
Do we map whole 4G in address space, if yes then we have to "unbreak" firmware mapping and use overlap mapping or do we map only portion of it? Both would make code more confusing and all for the sake of user convenience so they won't have to change their CLI?I was thinking about this patch:
-- >8 --
hw/hppa/machine.c +3
-2@@ -91,15 +91,16 @@ static void machine_hppa_init(MachineState *machine) } /* Limit main memory. */ - if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + if (ram_size > 4 * GiB) { + error_report("Can not model more than 4GB of RAM"); + exit(EXIT_FAILURE); }
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 106
Quoted 10 lines
hw/hppa/machine.c +1
-1/* Main memory region. */ ram_region = g_new(MemoryRegion, 1); memory_region_allocate_system_memory(ram_region, OBJECT(machine), "ram", ram_size); - memory_region_add_subregion(addr_space, 0, ram_region); + memory_region_add_subregion_overlap(addr_space, 0, ram_region, -1); /* Init Dino (PCI host bus chip). */ pci_bus = dino_init(addr_space, &rtc_irq, &serial_irq);
I haven't tested this patch, but that one seems good.
Helge
Quoted 22 lines
---
$ hppa-softmmu/qemu-system-hppa -m 3840m -S -monitor stdio QEMU 4.2.50 monitor - type 'help' for more information (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-00000000efffffff (prio -1, ram): ram 00000000f0000000-00000000f07fffff (prio 0, ram): firmware 00000000f9000000-00000000f90007ff (prio 0, i/o): isa-io 00000000f9000020-00000000f9000021 (prio 0, i/o): pic 00000000f9000070-00000000f9000071 (prio 0, i/o): rtc 00000000f9000070-00000000f9000070 (prio 0, i/o): rtc-index 00000000f90000a0-00000000f90000a1 (prio 0, i/o): pic 00000000f90004d0-00000000f90004d0 (prio 0, i/o): elcr 00000000f90004d1-00000000f90004d1 (prio 0, i/o): elcr 00000000fff80000-00000000fff80fff (prio 0, i/o): dino 00000000fff80064-00000000fff80067 (prio 0, i/o): pci-conf-idx 00000000fff80068-00000000fff8006b (prio 0, i/o): pci-conf-data 00000000fff83800-00000000fff83807 (prio 0, i/o): serial 00000000fffb0000-00000000fffb0003 (prio 0, i/o): cpu0-io-eir
Re: [PATCH 43/86] hppa: drop RAM size fixup
In reply to Helge DellerQuoted 33 lines · On Thu, 2 Jan 2020 12:31:58 +0100 Helge Deller <[email protected]> wrote:
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
hw/hppa/machine.c| 3 ++-1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?
Quoted 7 lines
I don't really like that change.
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.
It's annoying to see a error where it used to work before with no matter what -m value user have used.
But error message tells exact max size one could use,
so user doesn't have to know max, just fix CLI with provided value.
Quoted 5 lines
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
So, I think that patch is - although it's more correct - not a benefit for the end user.
Sure thing that users dislike when we do breaking changes (removing legacy CLI options, fixups or adding error checks that weren't there before). But I'd choose correctness (and consistent codebase) vs convenience. (it's no like we are hiding max from user)
Quoted 2 lines
Helge
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 52 lines · Igor Mammedov
Quoted 33 lines · On Thu, 2 Jan 2020 12:31:58 +0100 Helge Deller <[email protected]> wrote:
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?Quoted 7 lines
I don't really like that change.
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.It's annoying to see a error where it used to work before with no matter what -m value user have used.
But error message tells exact max size one could use,
so user doesn't have to know max, just fix CLI with provided value.Quoted 3 lines
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Quoted 6 lines
Quoted 2 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Sure thing that users dislike when we do breaking changes (removing legacy CLI options, fixups or adding error checks that weren't there before). But I'd choose correctness (and consistent codebase) vs convenience. (it's no like we are hiding max from user)
Going from 3841MB to 4GB is not a breaking change, and 4GB is correct I think. The Raspberry Pi machines do the same (allocate more RAM than the CPU is able to access, and DMA is able to use this extra RAM).
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 53 lines · On Thu, 2 Jan 2020 15:45:55 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 52 lines · Igor Mammedov
Quoted 33 lines · On Thu, 2 Jan 2020 12:31:58 +0100 Helge Deller <[email protected]> wrote:
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?Quoted 7 lines
I don't really like that change.
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.It's annoying to see a error where it used to work before with no matter what -m value user have used.
But error message tells exact max size one could use,
so user doesn't have to know max, just fix CLI with provided value.Quoted 3 lines
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Sure thing that users dislike when we do breaking changes (removing legacy CLI options, fixups or adding error checks that weren't there before). But I'd choose correctness (and consistent codebase) vs convenience. (it's no like we are hiding max from user)
Going from 3841MB to 4GB is not a breaking change, and 4GB is correct I
under breaking change, I've meant exit with error when it used to work with any values.
But the point in removing fixups to make user aware of valid input and make clear what's going on when someone reads the code.
QEMU code is already too complex to read, so I'd avoid supporting values that are not really supported by current impl. just for the sake of convenience. (a wrapper script could do that RAM size clamping if it is really necessary)
Quoted 2 lines
think. The Raspberry Pi machines do the same (allocate more RAM than the CPU is able to access, and DMA is able to use this extra RAM).
In current impl. raspi accepts RAM upto 1Gb maps all of it and reports that size to the guest. QEMU doesn't mask or waste anything. If we where to rise limit upto 4Gb, then there should be the code that would inform and allow guest utilize that.
Re: [PATCH 43/86] hppa: drop RAM size fixup
Quoted 74 lines · Igor Mammedov
Quoted 53 lines · On Thu, 2 Jan 2020 15:45:55 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 52 lines · Igor Mammedov
Quoted 33 lines · On Thu, 2 Jan 2020 12:31:58 +0100 Helge Deller <[email protected]> wrote:
Quoted 30 lines · Philippe Mathieu-Daudé
Quoted 18 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>--- hw/hppa/machine.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)hw/hppa/machine.c +0
-0hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 95
Quoted 5 lines
hw/hppa/machine.c +2
-1@@ -92,7 +92,8 @@ static void machine_hppa_init(MachineState *machine) /* Limit main memory. */ if (ram_size > FIRMWARE_START) { - machine->ram_size = ram_size = FIRMWARE_START; + error_report("RAM size more than %d is not supported", FIRMWARE_START); +exit (EXIT_FAILURE );$ qemu-system-hppa -m 3841m qemu-system-hppa: invalid accelerator kvm qemu-system-hppa: falling back to tcg qemu-system-hppa: RAM size more than -268435456 is not supportedQuoted 1 line
Instead of using
qemu_strtosz_MiBonFIRMWARE_STARTor unsigned format, we can simply use "RAM size more than 3840m is not supported". Is that OK with you?Quoted 7 lines
I don't really like that change.
We currently only emulate a 32-bit system, and for those 4GB is the maximum. So, if I start my machine with "qemu-system-hppa -m 4G", the current code then automatically uses the maximum possible of 3841MB (which is limited by firmware start address).
I don't expect users to know the excact 3841MB number.It's annoying to see a error where it used to work before with no matter what -m value user have used.
But error message tells exact max size one could use,
so user doesn't have to know max, just fix CLI with provided value.Quoted 3 lines
Even on a phyiscal machine you can only add DIMMs of sizes 2GB, 3GB or 4GB, but not "3841MB".
Quoted 8 lines
Quoted 6 lines
Quoted 2 lines
So, I think that patch is - although it's more correct - not a benefit for the end user.
Sure thing that users dislike when we do breaking changes (removing legacy CLI options, fixups or adding error checks that weren't there before). But I'd choose correctness (and consistent codebase) vs convenience. (it's no like we are hiding max from user)
Going from 3841MB to 4GB is not a breaking change, and 4GB is correct I
under breaking change, I've meant exit with error when it used to work with any values.
But the point in removing fixups to make user aware of valid input and make clear what's going on when someone reads the code.
QEMU code is already too complex to read, so I'd avoid supporting values that are not really supported by current impl. just for the sake of convenience. (a wrapper script could do that RAM size clamping if it is really necessary)
Quoted 6 lines
Quoted 2 lines
think. The Raspberry Pi machines do the same (allocate more RAM than the CPU is able to access, and DMA is able to use this extra RAM).
In current impl. raspi accepts RAM upto 1Gb maps all of it and reports that size to the guest. QEMU doesn't mask or waste anything. If we where to rise limit upto 4Gb, then there should be the code that would inform and allow guest utilize that.
For the raspi2/3, 16MB are lost and we don't complain neither change the ram_size, see the bcm2835-peripherals block overmapping the ram:
$ qemu-system-aarch64 -M raspi3 -monitor stdio -S
QEMU 3.1.1 monitor - type 'help' for more information
(qemu) info mtree
address-space: memory
0000000000000000-ffffffffffffffff (prio 0, i/o): system
0000000000000000-000000003fffffff (prio 0, ram): ram
000000003f000000-000000003fffffff (prio 1, i/o): bcm2835-peripherals
000000003f007000-000000003f007fff (prio 0, i/o): bcm2835-dma
000000003f00b200-000000003f00b3ff (prio 0, i/o): bcm2835-ic
000000003f00b800-000000003f00bbff (prio 0, i/o): bcm2835-mbox
000000003f104000-000000003f10400f (prio 0, i/o): bcm2835-rng
000000003f200000-000000003f200fff (prio 0, i/o): bcm2835_gpio
000000003f201000-000000003f201fff (prio 0, i/o): pl011
000000003f202000-000000003f202fff (prio 0, i/o): bcm2835-sdhost
000000003f215000-000000003f2150ff (prio 0, i/o): bcm2835-aux
000000003f300000-000000003f3000ff (prio 0, i/o): sdhci
000000003fe05000-000000003fe050ff (prio 0, i/o): bcm2835-dma-chan15
0000000040000000-00000000400000ff (prio 0, i/o): bcm2836-controlPATCH 1/1 hppa: allow max ram size upto 4Gb
In reply to Igor MammedovPrevious patch drops silent ram_size fixup and makes QEMU error out with:
"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience to allow using -m 4G vs -m 3840M.
---
I dislike it but if you feel it's really necessary feel free to ack it.
should be applied on top of:
"hppa: drop RAM size fixup"
--- hw/hppa/machine.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
hw/hppa/machine.c +12 -10
@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {
@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);
@@ -90,10 +89,12 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size;memory_region_add_subregion (addr_space,0 , machine->ram);
@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }
@@ -160,7 +161,8 @@ static void machine_hppa_init(MachineState *machine) rom_region =g_new (MemoryRegion,1 );memory_region_init_ram (rom_region,NULL ,"firmware" , (FIRMWARE_END -FIRMWARE_START ), &error_fatal); -memory_region_add_subregion (addr_space,FIRMWARE_START , rom_region); +memory_region_add_subregion_overlap (addr_space,FIRMWARE_START , rom_region, +1 );/* Load kernel */ if (kernel_filename) {
@@ -204,7 +206,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;
@@ -232,7 +234,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */
@@ -255,11 +257,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Signature · 1 line
2.7.4
Re: [PATCH] hppa: allow max ram size upto 4Gb
Quoted 67 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience to allow using -m 4G vs -m 3840M.
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
I dislike it but if you feel it's really necessary feel free to ack it.should be applied on top of:
"hppa: drop RAM size fixup"--- hw/hppa/machine.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)hw/hppa/machine.c +6
-5@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,10 +89,12 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size;memory_region_add_subregion (addr_space,0 , machine->ram);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 165
Quoted 6 lines
hw/hppa/machine.c +2
-1@@ -160,7 +161,8 @@ static void machine_hppa_init(MachineState *machine) rom_region =g_new (MemoryRegion,1 );memory_region_init_ram (rom_region,NULL ,"firmware" , (FIRMWARE_END -FIRMWARE_START ), &error_fatal); -memory_region_add_subregion (addr_space,FIRMWARE_START , rom_region); +memory_region_add_subregion_overlap (addr_space,FIRMWARE_START , rom_region, +1 );
I don't think this is enough because we also have:
(qemu) info mtree
address-space: memory
00000000f9000000-00000000f90007ff (prio 0, i/o): isa-io 00000000fff80000-00000000fff80fff (prio 0, i/o): dino 00000000fff83800-00000000fff83807 (prio 0, i/o): serial 00000000fffb0000-00000000fffb0003 (prio 0, i/o): cpu0-io-eir
Which is why I went the other way around, using prio=-1 for the ram.
Quoted 36 lines
hw/hppa/machine.c +4
-4/* Load kernel */ if (kernel_filename) {@@ -204,7 +206,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;@@ -232,7 +234,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +257,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH] hppa: allow max ram size upto 4Gb
Quoted 77 lines · On Thu, 2 Jan 2020 18:15:02 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 67 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience to allow using -m 4G vs -m 3840M.
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
I dislike it but if you feel it's really necessary feel free to ack it.should be applied on top of:
"hppa: drop RAM size fixup"--- hw/hppa/machine.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)hw/hppa/machine.c +6
-5@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,10 +89,12 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size;memory_region_add_subregion (addr_space,0 , machine->ram);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 165
Quoted 6 lines
hw/hppa/machine.c +2
-1@@ -160,7 +161,8 @@ static void machine_hppa_init(MachineState *machine) rom_region =g_new (MemoryRegion,1 );memory_region_init_ram (rom_region,NULL ,"firmware" , (FIRMWARE_END -FIRMWARE_START ), &error_fatal); -memory_region_add_subregion (addr_space,FIRMWARE_START , rom_region); +memory_region_add_subregion_overlap (addr_space,FIRMWARE_START , rom_region, +1 );I don't think this is enough because we also have:
Quoted 8 lines
(qemu) info mtree
address-space: memory
00000000f9000000-00000000f90007ff (prio 0, i/o): isa-io 00000000fff80000-00000000fff80fff (prio 0, i/o): dino 00000000fff83800-00000000fff83807 (prio 0, i/o): serial 00000000fffb0000-00000000fffb0003 (prio 0, i/o): cpu0-io-eirWhich is why I went the other way around, using prio=-1 for the ram.
True
(you see it just snowball of un-obvious changes for user convenience)
Quoted 39 lines
Quoted 37 lines
hw/hppa/machine.c +4
-4/* Load kernel */ if (kernel_filename) {@@ -204,7 +206,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;@@ -232,7 +234,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +257,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
PATCH v2 1/1 hppa: allow max ram size upto 4Gb
In reply to Philippe Mathieu-DaudéPrevious patch drops silent ram_size fixup and makes QEMU error out with:
"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regions
starting from 0xf9000000
I dislike it but if you feel it's really necessary feel free to ack it.
should be applied on top of:
"hppa: drop RAM size fixup"
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)
hw/hppa/machine.c +11 -10
@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {
@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);
@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);
@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }
@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;
@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */
@@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Signature · 1 line
2.7.4
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 15 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regions
Quoted 6 lines
starting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
should be applied on top of:
"hppa: drop RAM size fixup"
Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce clamped_ram_size and not continue with ram_size (even if you would add it as static local variable)?
Helge
Quoted 85 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +11
-10@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 23 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 15 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsQuoted 6 lines
starting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
should be applied on top of:
"hppa: drop RAM size fixup"
Quoted 6 lines
Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.
1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?
it's necessary since ram_size is global which should be kept == MachineState::ram_size. Later on I plan to remove the former altogether and maybe MachineState::ram_size aa well, since it could be read with memory_region_size(MachineState::ram).
Quoted 89 lines
Helge
Quoted 85 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +11
-10@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 19 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 3 lines
Having everything in one single patch makes your full change more understandable.
Quoted 6 lines
Quoted 2 lines
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).
Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;
Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;
Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 47 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 21 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?
Quoted 7 lines
Quoted 4 lines
it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global ram_size fixup, this board only business and naming it clamped_ram_size to match its current usage (along with explicitly documenting the deviation from other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).
Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Well, board was fixing up global ram_size and then used it to
- pass clamped value to guest via register
- pass it to load load_image_targphys()
- perform various checks
- affects reset sequence
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global ram_size && ms->ram_size && uses generic ms->ram && preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.
Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Philippe Mathieu-Daudé
Reviewed-byRe: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 69 lines · Igor Mammedov
Quoted 47 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regions starting from0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 21 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?Quoted 7 lines
Quoted 4 lines
it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global
ram_sizefixup, this board only business and naming itclamped_ram_sizeto match its current usage (along with explicitly documenting the deviation from other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Quoted 5 lines
Well, board was fixing up global
ram_sizeand then used it to
- pass clamped value to guest via register
- pass it to loadload_image_targphys()
- perform various checks
- affects reset sequence
You are correct. 'clamped_ram_size' is a good name.
Quoted 2 lines
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
It makes sense.
Quoted 7 lines
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global
ram_size&&ms->ram_size&& uses genericms->ram&& preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.
No, now than I understood your explication:
Thanks for insisting :)
Quoted 94 lines
Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
In reply to Igor MammedovQuoted 55 lines · Igor Mammedov
Quoted 52 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).
Quoted 6 lines
Quoted 2 lines
Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global
ram_sizefixup, this board only business and naming itclamped_ram_sizeto match its current usage
Ok.
Quoted 4 lines
(along with explicitly documenting the deviation from
other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).
No, here you are wrong.
This machine, same as all 32-bit x86 based machines, expect users to insert memory modules of e.g. 1GB, 2GB and so on.
And ROM memory and other regions overlap the RAM in some regions if required.
So, it's not "user convenience", but it's correct behaviour of the code to simply allow 4GB and then don't blend in the memory which can't be accessed.
Giving a error message that "you can only insert 3841MB" would be WRONG.
Quoted 9 lines
Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Well, board was fixing up global
ram_sizeand then used it to
- pass clamped value to guest via register
- pass it to loadload_image_targphys()
- perform various checks
- affects reset sequence
... which is all OK, because it mimics the real hardware.
Quoted 2 lines
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
Yep (unless I change the SeaBIOS ROM code).
Anyway, I'm tired to discuss this.
Your patch isn't wrong by itself, I just think it's changing unnecessary too much code and uses wrong wording for the commit message. But just apply it as long as it doesn't break anything.
Helge
Quoted 102 lines
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global
ram_size&&ms->ram_size&& uses genericms->ram&& preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 90 lines · On Mon, 6 Jan 2020 12:28:51 +0100 Helge Deller <[email protected]> wrote:
Quoted 55 lines · Igor Mammedov
Quoted 52 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).Quoted 6 lines
Quoted 2 lines
Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global
ram_sizefixup, this board only business and naming itclamped_ram_sizeto match its current usageOk.
Quoted 4 lines
(along with explicitly documenting the deviation from
other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).No, here you are wrong.
This machine, same as all 32-bit x86 based machines, expect users to insert memory modules of e.g. 1GB, 2GB and so on.
And ROM memory and other regions overlap the RAM in some regions if required.
So, it's not "user convenience", but it's correct behaviour of the code to simply allow 4GB and then don't blend in the memory which can't be accessed.
Giving a error message that "you can only insert 3841MB" would be WRONG.Quoted 9 lines
Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Well, board was fixing up global
ram_sizeand then used it to
- pass clamped value to guest via register
- pass it to loadload_image_targphys()
- perform various checks
- affects reset sequence
Quoted 6 lines
... which is all OK, because it mimics the real hardware.
Quoted 2 lines
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
Yep (unless I change the SeaBIOS ROM code).
Does real HW pass in cpu[0]->env.gr[26] full 4Gb or clamped size?
Quoted 3 lines
Anyway, I'm tired to discuss this.
Your patch isn't wrong by itself, I just think it's changing unnecessary too much codearam_sizenduses wrong wording for the commit message.
Let me prepare v3 which hopefully will make is smaller and with commit message corrected.
How about following wording:
"
hppa: allow max ram size upto 4Gb
Previous patch drops silent ram_size fixup and makes QEMU error out with:
"RAM size more than 3840m is not supported"
when user specified -m X more than currently supported value.
However real hardware allows to plug in up to 4Gb RAM into memory slots. So allow user specify up to 4Gb and map all of it into guest address space.
PS:
guest will still see 3840m being reported in cpu[0]->env.gr[26] and loose ~248Mb, as it doesn't have other means to discover RAM above firmware ROM.
"
Quoted 108 lines
But just apply it as long as it doesn't break anything.
Helge
Quoted 102 lines
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global
ram_size&&ms->ram_size&& uses genericms->ram&& preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 93 lines · Igor Mammedov
Quoted 90 lines · On Mon, 6 Jan 2020 12:28:51 +0100 Helge Deller <[email protected]> wrote:
Quoted 55 lines · Igor Mammedov
Quoted 52 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).Quoted 6 lines
Quoted 2 lines
Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global
ram_sizefixup, this board only business and naming itclamped_ram_sizeto match its current usageOk.
Quoted 4 lines
(along with explicitly documenting the deviation from
other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).No, here you are wrong.
This machine, same as all 32-bit x86 based machines, expect users to insert memory modules of e.g. 1GB, 2GB and so on.
And ROM memory and other regions overlap the RAM in some regions if required.
So, it's not "user convenience", but it's correct behaviour of the code to simply allow 4GB and then don't blend in the memory which can't be accessed.
Giving a error message that "you can only insert 3841MB" would be WRONG.Quoted 9 lines
Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Well, board was fixing up global
ram_sizeand then used it to
- pass clamped value to guest via register
- pass it to loadload_image_targphys()
- perform various checks
- affects reset sequence
Quoted 8 lines
Quoted 6 lines
... which is all OK, because it mimics the real hardware.
Quoted 2 lines
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
Yep (unless I change the SeaBIOS ROM code).
Does real HW pass in cpu[0]->env.gr[26] full 4Gb or clamped size?
No, because of the simple reason that real hardware uses a propriatary HP Firmware, and that it's not started from some emulation layer like qemu. So it has to find way itself to detect how much RAM was plugged into the machine.
The functionality of giving the ram size in %r26 was done by me, otherwise I don't know how SeaBIOS should detect how much RAM the user wanted the machine to have. That's changeable if you have another idea. Doesn't on x86 the ram size is given in some emulated RTC register?
Quoted 22 lines
Quoted 3 lines
Anyway, I'm tired to discuss this.
Your patch isn't wrong by itself, I just think it's changing unnecessary too much code and uses wrong wording for the commit message.Let me prepare v3 which hopefully will make is smaller and with commit message corrected.
How about following wording:
"
hppa: allow max ram size upto 4GbPrevious patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than currently supported value.
However real hardware allows to plug in up to 4Gb RAM into memory slots. So allow user specify up to 4Gb and map all of it into guest address space.
Quoted 5 lines
PS:
guest will still see 3840m being reported in cpu[0]->env.gr[26] and loose ~248Mb, as it doesn't have other means to discover RAM above firmware ROM.
"
Why make it so complicated?
I see:
+ if (machine->ram_size > 4 * GiB) {
+ error_report("RAM size more than 4Gb is not supported");
what type is machine->ram_size?
If it's a 32bit unsigned integer this check is useless, and if it's a 64bit integer it would be too big for a 32bit-only platform anyway.
So, I'd suggest to drop your wrong patch #43.
If you don't want to drop it, my suggestion for a commit message is:
hppa: Revert last wrong patch and give warning if user specified > 4GB RAM
Helge
Quoted 110 lines
Quoted 109 lines
But just apply it as long as it doesn't break anything.
Helge
Quoted 102 lines
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global
ram_size&&ms->ram_size&& uses genericms->ram&& preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 108 lines · On Mon, 6 Jan 2020 18:03:49 +0100 Helge Deller <[email protected]> wrote:
Quoted 93 lines · Igor Mammedov
Quoted 90 lines · On Mon, 6 Jan 2020 12:28:51 +0100 Helge Deller <[email protected]> wrote:
Quoted 55 lines · Igor Mammedov
Quoted 52 lines · On Sat, 4 Jan 2020 16:00:19 +0100 Philippe Mathieu-Daudé <[email protected]>…
Quoted 14 lines · Igor Mammedov
Quoted 11 lines · On Thu, 2 Jan 2020 21:22:12 +0100 Helge Deller <[email protected]> wrote:
Quoted 10 lines · Igor Mammedov
Previous patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than supported value.
User shouldn't be bothered with starting QEMU with valid CLI, so for the sake of user convenience allow using -m 4G vs -m 3840M.
Quoted 8 lines
Quoted 8 lines
Quoted 8 lines
Requested-by Helge Deller <[email protected]>Signed-off-by Igor Mammedov <[email protected]>---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regionsstarting from 0xf9000000I dislike it but if you feel it's really necessary feel free to ack it.
Hard to find the v2 buried in the other series with my email client.
Quoted 25 lines
Quoted 10 lines
Quoted 3 lines
should be applied on top of:
"hppa: drop RAM size fixup"Hello Igor,
I appreciate that you are trying to make it more cleaner. But, can't you merge both of your patches to one patch? Right now you have one patch "hppa: drop RAM size fixup", which is what I think is wrong. Then you add another one which somehow fixes it up again and adds other stuff.1st patch bring it in line with other boards adding proper error check but without changing RAM size. While 2nd is changing device model (mapped RAM size) and clearly documents that it's a hack for user convenience, Hence I'd prefer to keep both separated.
Quoted 5 lines
Having everything in one single patch makes your full change more understandable.
Is it necessary to introduce
clamped_ram_sizeand not continue withram_size(even if you would add it as static local variable)?it's necessary since
ram_sizeis global which should be kept ==MachineState::ram_size. Later on I plan to remove the former altogether and maybeMachineState::ram_sizeaa well, since it could be read withmemory_region_size(MachineState::ram).Quoted 6 lines
Quoted 2 lines
Why insist on clamping the ram? We recommend to model what the hardware does, and the hardware uses a full DIMM of DRAM, so 4GB, not less.
I'm not adding 4Gb support here (it's out of scope of this series), all this patch does is making pre-existing global
ram_sizefixup, this board only business and naming itclamped_ram_sizeto match its current usageOk.
Quoted 4 lines
(along with explicitly documenting the deviation from
other boards why it was requested to keep fixup 'for user convenience' instead of going for correct and simpler error message telling how much RAM user could specify on CLI).No, here you are wrong.
This machine, same as all 32-bit x86 based machines, expect users to insert memory modules of e.g. 1GB, 2GB and so on.
And ROM memory and other regions overlap the RAM in some regions if required.
So, it's not "user convenience", but it's correct behaviour of the code to simply allow 4GB and then don't blend in the memory which can't be accessed.
Giving a error message that "you can only insert 3841MB" would be WRONG.Quoted 9 lines
Quoted 3 lines
What are the new problem introduced by using 4GB? I only see advantages doing so. This doesn't break your series. This doesn't break the CLI. Am I missing something?
Well, board was fixing up global
ram_sizeand then used it to
- pass clamped value to guest via register
- pass it to loadload_image_targphys()
- perform various checks
- affects reset sequenceQuoted 8 lines
Quoted 6 lines
... which is all OK, because it mimics the real hardware.
Quoted 2 lines
This patch keeps all of that in the same state (I'd suspect changing above points, would break guest)
Yep (unless I change the SeaBIOS ROM code).
Does real HW pass in cpu[0]->env.gr[26] full 4Gb or clamped size?
No, because of the simple reason that real hardware uses a propriatary HP Firmware, and that it's not started from some emulation layer like qemu. So it has to find way itself to detect how much RAM was plugged into the machine.
Quoted 4 lines
The functionality of giving the ram size in %r26 was done by me, otherwise I don't know how SeaBIOS should detect how much RAM the user wanted the machine to have. That's changeable if you have another idea. Doesn't on x86 the ram size is given in some emulated RTC register?
In x86 case, there is RTC value and there is memory map provided via paravirt fwcfg.
Using register is fine for passing total RAM size and Since it's QEMU invention, we could pass full 4Gb in register as a starting point to support 4Gb of RAM (which removes fixup) and let SeaBIOS to deduce memory map from that.
Then this patch cloud be amended to:
"
hpp: support 4G of RAM
Real hardware allows to plug in up to 4Gb of RAM
into memory slots, add support for this.
"
Quoted 22 lines
Quoted 22 lines
Quoted 3 lines
Anyway, I'm tired to discuss this.
Your patch isn't wrong by itself, I just think it's changing unnecessary too much code and uses wrong wording for the commit message.Let me prepare v3 which hopefully will make is smaller and with commit message corrected.
How about following wording:
"
hppa: allow max ram size upto 4GbPrevious patch drops silent
ram_sizefixup and makes QEMU error out with:"RAM size more than 3840m is not supported"
when user specified -m X more than currently supported value.
However real hardware allows to plug in up to 4Gb RAM into memory slots. So allow user specify up to 4Gb and map all of it into guest address space.
Quoted 7 lines
Quoted 5 lines
PS:
guest will still see 3840m being reported in cpu[0]->env.gr[26] and loose ~248Mb, as it doesn't have other means to discover RAM above firmware ROM.
"Why make it so complicated?
It describes what exactly patch does without masking any consequences of used approach (since we are not really telling guest that it has more RAM and guest has other means to discover it).
If you are asking why I'm making it hard error, see cover letter. (in short main RAM allocation is total mess and series fixes that by consolidating, de-duplicating and replacing ad hoc allocation with a centralized approach that allows user to specify used RAM backend in generic case).
Quoted 7 lines
I see:
(quoted diff) +2
-0+ if (machine->ram_size > 4 * GiB) { + error_report("RAM size more than 4Gb is not supported");what type is
machine->ram_size?
If it's a 32bit unsigned integer this check is useless, and if it's a 64bit integer it would be too big for a 32bit-only platform anyway.
it's ram_addr_t, which is mutable depending on the host it could be 32-bit or 64-bit.
Currently QEMU doesn't have a generic code to do such checks and QEMU accumulated a whole zoo where some boards do checks, some mask incorrect -m values and some do don't do any checks. But cleaning up that is out of scope of this already big enough re-factoring.
Hence I'm adding checks/removing fixups where they were missing/present as it's a minimum effort needed to generalize main RAM allocation.
Quoted 1 line
So, I'd suggest to drop your wrong patch #43.
As you noted in your first reply, patch is correct. All it's doing is validating user input versus RAM size actually supported by the current code, telling user current supported limit and enforcing it.
I agree it's inconvenience for the users since they won't be able to specify non-sense values and still get board running, but that's clear user error and should be corrected on user side and not by QEMU magically masking wrong CLI values.
Since it could be fixed on user side, I care less about user convenience when it comes to correctness and unified code.
Quoted 3 lines
If you don't want to drop it, my suggestion for a commit message is:
hppa: Revert last wrong patch and give warning if user specified > 4GB RAM
I have to disagree on definition of wrong here, in my opinion covering up user errors is wrong especially when all users have to do is to adapt their CLI.
Supporting 4Gb is another story, which is extending current impl. and could be done on top of the ram_size check.
Quoted 113 lines
Helge
Quoted 110 lines
Quoted 109 lines
But just apply it as long as it doesn't break anything.
Helge
Quoted 102 lines
If you have an alternative patch that enables to use full 4Gb, I'd include on respin as far as it doesn't change user supplied global
ram_size&&ms->ram_size&& uses genericms->ram&& preferably on top of
"[PATCH 44/86] hppa: use memdev for RAM"
so it would be easier to drop it if there would opposition to it without affecting series.Quoted 93 lines
Quoted 61 lines
Quoted 61 lines
Quoted 61 lines
--- hw/hppa/machine.c | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-)hw/hppa/machine.c +8
-7@@ -54,6 +54,7 @@ static uint64_t cpu_hppa_to_phys(void *opaque, uint64_t addr)static HPPACPU *cpu[HPPA_MAX_CPUS ];static uint64_t firmware_entry; +static ram_addr_t clamped_ram_size;static void machine_hppa_init (MachineState *machine) {@@ -74,8 +75,6 @@ static void machine_hppa_init(MachineState *machine)long i;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);@@ -90,12 +89,14 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { -error_report ("RAM size more than %d is not supported" ,FIRMWARE_START ); +if (machine->ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" );exit (EXIT_FAILURE ); } + clamped_ram_size = machine->ram_size >FIRMWARE_START ? +FIRMWARE_START : machine->ram_size; -memory_region_add_subregion (addr_space,0 , machine->ram); +memory_region_add_subregion_overlap (addr_space,0 , machine->ram,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -151,7 +152,7 @@ static void machine_hppa_init(MachineState *machine)qemu_log_mask (CPU_LOG_PAGE ,"Firmware loaded at 0x%08" PRIx64"-0x%08" PRIx64", entry at 0x%08" PRIx64".\n" , firmware_low, firmware_high, firmware_entry); -if (firmware_low < ram_size || firmware_high >=FIRMWARE_END ) { +if (firmware_low < clamped_ram_size || firmware_high >=FIRMWARE_END ) {error_report ("Firmware overlaps with memory or IO space" );exit (1 ); }@@ -204,7 +205,7 @@ static void machine_hppa_init(MachineState *machine)(1) Due to sign-extension problems and PDC, put the initrd no higher than 1G. (2) Reserve 64k for stack. */ - initrd_base =MIN (ram_size,1 * GiB); + initrd_base =MIN (clamped_ram_size,1 * GiB); initrd_base = initrd_base -64 * KiB; initrd_base = (initrd_base - initrd_size) &TARGET_PAGE_MASK ;Quoted 6 lines
Quoted 6 lines
hw/hppa/machine.c static void machine_hppa_init(MachineState *machine) · line 236
Quoted 6 lines
hw/hppa/machine.c +1
-1@@ -232,7 +233,7 @@ static void machine_hppa_init(MachineState *machine)* various parameters in registers. After firmware initialization, * firmware will start the Linux kernel with ramdisk and cmdline. */ - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size;Helge, is this the code using this register?
https://github.com/hdeller/seabios-hppa/blob/parisc-qemu-5.0/src/parisc/head.S#L139
Quoted 20 lines
Quoted 19 lines
Quoted 18 lines
hw/hppa/machine.c +2
-2cpu[0 ]->env.gr[25 ] = kernel_entry;/* tell firmware how many SMP CPUs to present in inventory table */ @@ -255,11 +256,11 @@ static void hppa_machine_reset(MachineState *ms) }/* already initialized by machine_hppa_init()? */ -if (cpu[0 ]->env.gr[26 ] == ram_size) { +if (cpu[0 ]->env.gr[26 ] == clamped_ram_size) {return ; } - cpu[0 ]->env.gr[26 ] = ram_size; + cpu[0 ]->env.gr[26 ] = clamped_ram_size; cpu[0 ]->env.gr[25 ] =0 ;/* no firmware boot menu */ cpu[0 ]->env.gr[24 ] ='c' ;/* gr22/gr23 unused, no initrd while reboot. */
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
Quoted 3 lines · Igor Mammedov
On Mon, 6 Jan 2020 18:03:49 +0100
Quoted 1 line
So, I'd suggest to drop your wrong patch #43.
As you noted in your first reply, patch is correct.
You probably got me wrong.
Your patch #43 is wrong, and your fixup patch to some degree reverts it back again.
In patch #43 you error out and stop, which real hardware wouldn't do. Real hardware simply ignores the memory which wouldn't be used.
Quoted 2 lines
All it's doing is validating user input versus RAM size
actually supported by the current code, telling user> current supported limit and enforcing it.
Real hardware would not tell user.
Quoted 5 lines
I agree it's inconvenience for the users since they won't be able to specify non-sense values and still get board running, but that's clear user error and should be corrected on user side and not by QEMU magically masking wrong CLI values.
I disagree.
Everything worked as expected before, but with *your* change now people might need to modify their CLI.
4GB is a valid amount of memory which can be plugged into the virtual and physical machine.
It's not magic, it's how the architecture works and you changed it.
Quoted 3 lines
Since it could be fixed on user side, I care less about user convenience when it comes to correctness and unified code.
IMHO, you should care about that the emulation works the same way as physical machine. Not, how you want to educate end users.
Quoted 7 lines
Quoted 3 lines
If you don't want to drop it, my suggestion for a commit message is:
hppa: Revert last wrong patch and give warning if user specified > 4GB RAM
I have to disagree on definition of wrong here, in my opinion covering up user errors is wrong especially when all users have to do is to adapt their CLI.
See above. Nobody ever needs to adapt anything unless your patches gets applied.
Helge
Re: [PATCH v2] hppa: allow max ram size upto 4Gb
On Tue, 7 Jan 2020 12:53:32 +0100
Helge Deller <[email protected]> wrote:
Even though I disagree and it would waste ~256Mb 4Gb of RAM, I think I should be able to replace #43 with
"hppa: allow max ram size upto 4Gb"
as it still removes fix up at mapped address space level, removes fix up of global ram_size variable and adds max size check,
which lets hppa board get out of the way of re-factoring generic RAM allocation and making what board does with provided RAM its own business.
Quoted 6 lines · Igor Mammedov
Quoted 3 lines
On Mon, 6 Jan 2020 18:03:49 +0100
Quoted 1 line
So, I'd suggest to drop your wrong patch #43.
As you noted in your first reply, patch is correct.
You probably got me wrong.
whichever way I read it
https://www.mail-archive.com/[email protected]/msg667855.html
states user convenience as a reason.
Quoted 23 lines
Your patch #43 is wrong, and your fixup patch to some degree reverts it back again.
In patch #43 you error out and stop, which real hardware wouldn't do. Real hardware simply ignores the memory which wouldn't be used.
Quoted 2 lines
All it's doing is validating user input versus RAM size
actually supported by the current code, telling user> current supported limit and enforcing it.Real hardware would not tell user.
Quoted 5 lines
I agree it's inconvenience for the users since they won't be able to specify non-sense values and still get board running, but that's clear user error and should be corrected on user side and not by QEMU magically masking wrong CLI values.
I disagree.
Everything worked as expected before, but with *your* change now people might need to modify their CLI.
4GB is a valid amount of memory which can be plugged into the virtual and physical machine.
It's not magic, it's how the architecture works and you changed it.
Quoted 6 lines
Quoted 3 lines
Since it could be fixed on user side, I care less about user convenience when it comes to correctness and unified code.
IMHO, you should care about that the emulation works the same way as physical machine.
As for correctness wrt real hardware questions are:
* is one able to stuff hardware with unsupported 4Gb or more DIMMs, will system even work?
* what real hardware does with top 256Gb of 4Gb RAM if present? Is it addressable/accessible in some way by CPUs or devices?
* how does real firmware discovers amount of installed RAM
[...]
PATCH v3 43/86 hppa: allow max ram size upto 4Gb
In reply to Igor MammedovReal hardware allows to plug in up to 4Gb RAM into memory slots. So allow user specify up to 4Gb and map all of it into guest address space.
PS:
* guest will still see 3840m being reported in cpu[0]->env.gr[26] and won't be avare of remaining ~248Mb, as it doesn't have other means to discover RAM above firmware ROM.
* use local ram_size to avoid changing global one which shouldn't be changed boards and will be removed in the future
---
v2:
- make main ram -1 prio, so it wouldn't conflict with other regions starting from 0xf9000000
(Philippe Mathieu-Daudé <[email protected]>)
- avoid type size comparision error on migw32 host with ram_addr_t
- simplify code a bit using local ram_size var.
- rewrite commit message
v3:
- drop "hppa: drop RAM size fixup"
- rewrite commit message
- use 64-bit local ram_size to workaround always false condition "if (ram_size > 4 * GiB)" when building on 32-bit host (mingw-32) as it's preffered over ifdefs.
--- hw/hppa/machine.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
hw/hppa/machine.c +8 -5
@@ -73,10 +73,9 @@ static void machine_hppa_init(MachineState *machine)MemoryRegion *ram_region;MemoryRegion *cpu_region;long i; +uint64_t ram_size = machine->ram_size;unsigned int smp_cpus = machine->smp.cpus; - ram_size = machine->ram_size; -/* Create CPUs. */ for (i =0 ; i < smp_cpus; i++) {char *name =g_strdup_printf ("cpu%ld-io-eir" , i);
@@ -91,15 +90,17 @@ static void machine_hppa_init(MachineState *machine) }/* Limit main memory. */ -if (ram_size >FIRMWARE_START ) { - machine->ram_size = ram_size =FIRMWARE_START ; +if (ram_size >4 * GiB) { +error_report ("RAM size more than 4Gb is not supported" ); +exit (EXIT_FAILURE ); } + ram_size = ram_size >FIRMWARE_START ?FIRMWARE_START : ram_size;/* Main memory region. */ ram_region =g_new (MemoryRegion,1 );memory_region_allocate_system_memory (ram_region,OBJECT (machine),"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion_overlap (addr_space,0 , ram_region,-1 );/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);
@@ -246,6 +247,8 @@ static void machine_hppa_init(MachineState *machine)static void hppa_machine_reset (MachineState *ms) {unsigned int smp_cpus = ms->smp.cpus; +uint64_t ram_size = ms->ram_size >FIRMWARE_START ?FIRMWARE_START : + ms->ram_size;int i;qemu_devices_reset ();
Signature · 1 line
2.7.4
PATCH 44/86 hppa: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/hppa/machine.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
hw/hppa/machine.c +2 -6
@@ -70,7 +70,6 @@ static void machine_hppa_init(MachineState *machine)uint64_t kernel_entry =0 , kernel_low, kernel_high;MemoryRegion *addr_space =get_system_memory ();MemoryRegion *rom_region; -MemoryRegion *ram_region;MemoryRegion *cpu_region;long i;unsigned int smp_cpus = machine->smp.cpus;
@@ -96,11 +95,7 @@ static void machine_hppa_init(MachineState *machine)exit (EXIT_FAILURE ); } -/* Main memory region. */ - ram_region =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (ram_region,OBJECT (machine), -"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion (addr_space,0 , machine->ram);/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);
@@ -284,6 +279,7 @@ static void machine_hppa_machine_init(MachineClass *mc) mc->is_default =1 ; mc->default_ram_size =512 * MiB; mc->default_boot_order ="cd" ; + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("hppa" , machine_hppa_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 44/86] hppa: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 38 lines
--- hw/hppa/machine.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)hw/hppa/machine.c +2
-6@@ -70,7 +70,6 @@ static void machine_hppa_init(MachineState *machine)uint64_t kernel_entry =0 , kernel_low, kernel_high;MemoryRegion *addr_space =get_system_memory ();MemoryRegion *rom_region; -MemoryRegion *ram_region;MemoryRegion *cpu_region;long i;unsigned int smp_cpus = machine->smp.cpus;@@ -96,11 +95,7 @@ static void machine_hppa_init(MachineState *machine)exit (EXIT_FAILURE ); } -/* Main memory region. */ - ram_region =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (ram_region,OBJECT (machine), -"ram" , ram_size); -memory_region_add_subregion (addr_space,0 , ram_region); +memory_region_add_subregion (addr_space,0 , machine->ram);/* Init Dino (PCI host bus chip). */ pci_bus =dino_init (addr_space, &rtc_irq, &serial_irq);@@ -284,6 +279,7 @@ static void machine_hppa_machine_init(MachineClass *mc) mc->is_default =1 ; mc->default_ram_size =512 * MiB; mc->default_boot_order ="cd" ; + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("hppa" , machine_hppa_machine_init)
PATCH 45/86 x86:microvm: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/i386/microvm.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
hw/i386/microvm.c +5 -7
@@ -167,7 +167,7 @@ static void microvm_memory_init(MicrovmMachineState *mms) {MachineState *machine =MACHINE (mms);X86MachineState *x86ms =X86_MACHINE (mms); -MemoryRegion *ram, *ram_below_4g, *ram_above_4g; +MemoryRegion *ram_below_4g, *ram_above_4g;MemoryRegion *system_memory =get_system_memory ();FWCfgState *fw_cfg;ram_addr_t lowmem;
@@ -214,12 +214,8 @@ static void microvm_memory_init(MicrovmMachineState *mms) x86ms->below_4g_mem_size = machine->ram_size; } - ram =g_malloc (sizeof (*ram)); -memory_region_allocate_system_memory (ram,NULL ,"microvm.ram" , - machine->ram_size); - ram_below_4g =g_malloc (sizeof (*ram_below_4g)); -memory_region_init_alias (ram_below_4g,NULL ,"ram-below-4g" , ram, +memory_region_init_alias (ram_below_4g,NULL ,"ram-below-4g" , machine->ram,0 , x86ms->below_4g_mem_size);memory_region_add_subregion (system_memory,0 , ram_below_4g);
@@ -227,7 +223,8 @@ static void microvm_memory_init(MicrovmMachineState *mms)if (x86ms->above_4g_mem_size >0 ) { ram_above_4g =g_malloc (sizeof (*ram_above_4g)); -memory_region_init_alias (ram_above_4g,NULL ,"ram-above-4g" , ram, +memory_region_init_alias (ram_above_4g,NULL ,"ram-above-4g" , + machine->ram, x86ms->below_4g_mem_size, x86ms->above_4g_mem_size); memory_region_add_subregion(system_memory, 0x100000000ULL,
@@ -502,6 +499,7 @@ static void microvm_class_init(ObjectClass *oc, void *data) mc->auto_enable_numa_with_memhp = false; mc->default_cpu_type =TARGET_DEFAULT_CPU_TYPE ; mc->nvdimm_supported = false; + mc->default_ram_id ="microvm.ram" ;/* Avoid relying too much on kernel components */ mc->default_kernel_irqchip_split = true;
Signature · 1 line
2.7.4
PATCH 46/86 x86:pc: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/i386/pc.c | 19 +++++++++---------- 1 file changed, 9 insertions(+), 10 deletions(-)
hw/i386/pc.c +9 -10
@@ -935,7 +935,7 @@ void pc_memory_init(PCMachineState *pcms, MemoryRegion **ram_memory) {int linux_boot, i; -MemoryRegion *ram, *option_rom_mr; +MemoryRegion *option_rom_mr;MemoryRegion *ram_below_4g, *ram_above_4g;FWCfgState *fw_cfg;MachineState *machine =MACHINE (pcms);
@@ -948,22 +948,20 @@ void pc_memory_init(PCMachineState *pcms, linux_boot = (machine->kernel_filename !=NULL ); -/* Allocate RAM. We allocate it as a single memory region and use -* aliases to address portions of it, mostly for backwards compatibility -* with older qemus that used qemu_ram_alloc(). +/* +* Split single memory region and use aliases to address portions of it, +* done for backwards compatibility with older qemus. */ - ram =g_malloc (sizeof (*ram)); -memory_region_allocate_system_memory (ram,NULL ,"pc.ram" , - machine->ram_size); - *ram_memory = ram; + *ram_memory = machine->ram; ram_below_4g =g_malloc (sizeof (*ram_below_4g)); -memory_region_init_alias (ram_below_4g,NULL ,"ram-below-4g" , ram, +memory_region_init_alias (ram_below_4g,NULL ,"ram-below-4g" , machine->ram,0 , x86ms->below_4g_mem_size);memory_region_add_subregion (system_memory,0 , ram_below_4g);e820_add_entry (0 , x86ms->below_4g_mem_size,E820_RAM );if (x86ms->above_4g_mem_size >0 ) { ram_above_4g =g_malloc (sizeof (*ram_above_4g)); -memory_region_init_alias (ram_above_4g,NULL ,"ram-above-4g" , ram, +memory_region_init_alias (ram_above_4g,NULL ,"ram-above-4g" , + machine->ram, x86ms->below_4g_mem_size, x86ms->above_4g_mem_size); memory_region_add_subregion(system_memory, 0x100000000ULL,
@@ -1951,6 +1949,7 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) mc->default_cpu_type =TARGET_DEFAULT_CPU_TYPE ; mc->nvdimm_supported = true; mc->numa_mem_supported = true; + mc->default_ram_id ="pc.ram" ; object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int", pc_machine_get_device_memory_region_size, NULL,
Signature · 1 line
2.7.4
PATCH 47/86 lm32:lm32_boards: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/lm32/lm32_boards.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)
hw/lm32/lm32_boards.c +23 -13
@@ -75,22 +75,27 @@ static void main_cpu_reset(void *opaque)static void lm32_evr_init (MachineState *machine) { +MachineClass *mc =MACHINE_GET_CLASS (machine);const char *kernel_filename = machine->kernel_filename;LM32CPU *cpu;CPULM32State *env;DriveInfo *dinfo;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *phys_ram =g_new (MemoryRegion,1 );qemu_irq irq[32 ];ResetInfo *reset_info;int i; +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +/* memory map */ hwaddr flash_base =0x04000000 ;size_t flash_sector_size =256 * KiB;size_t flash_size =32 * MiB;hwaddr ram_base =0x08000000 ; -size_t ram_size =64 * MiB;hwaddr timer0_base =0x80002000 ;hwaddr uart0_base =0x80006000 ;hwaddr timer1_base =0x8000a000 ;
@@ -107,9 +112,7 @@ static void lm32_evr_init(MachineState *machine) reset_info->flash_base = flash_base; -memory_region_allocate_system_memory (phys_ram,NULL ,"lm32_evr.sdram" , - ram_size); -memory_region_add_subregion (address_space_mem, ram_base, phys_ram); +memory_region_add_subregion (address_space_mem, ram_base, machine->ram); dinfo =drive_get (IF_PFLASH ,0 ,0 );/* Spansion S29NS128P */
@@ -144,7 +147,7 @@ static void lm32_evr_init(MachineState *machine)if (kernel_size <0 ) { kernel_size =load_image_targphys (kernel_filename, ram_base, - ram_size); + machine->ram_size); reset_info->bootstrap_pc = ram_base; }
@@ -159,6 +162,7 @@ static void lm32_evr_init(MachineState *machine)static void lm32_uclinux_init (MachineState *machine) { +MachineClass *mc =MACHINE_GET_CLASS (machine);const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;
@@ -166,18 +170,22 @@ static void lm32_uclinux_init(MachineState *machine)CPULM32State *env;DriveInfo *dinfo;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *phys_ram =g_new (MemoryRegion,1 );qemu_irq irq[32 ];HWSetup *hw;ResetInfo *reset_info;int i; +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +/* memory map */ hwaddr flash_base =0x04000000 ;size_t flash_sector_size =256 * KiB;size_t flash_size =32 * MiB;hwaddr ram_base =0x08000000 ; -size_t ram_size =64 * MiB;hwaddr uart0_base =0x80000000 ;hwaddr timer0_base =0x80002000 ;hwaddr timer1_base =0x80010000 ;
@@ -200,9 +208,7 @@ static void lm32_uclinux_init(MachineState *machine) reset_info->flash_base = flash_base; -memory_region_allocate_system_memory (phys_ram,NULL , -"lm32_uclinux.sdram" , ram_size); -memory_region_add_subregion (address_space_mem, ram_base, phys_ram); +memory_region_add_subregion (address_space_mem, ram_base, machine->ram); dinfo =drive_get (IF_PFLASH ,0 ,0 );/* Spansion S29NS128P */
@@ -238,7 +244,7 @@ static void lm32_uclinux_init(MachineState *machine)if (kernel_size <0 ) { kernel_size =load_image_targphys (kernel_filename, ram_base, - ram_size); + machine->ram_size); reset_info->bootstrap_pc = ram_base; }
@@ -252,7 +258,7 @@ static void lm32_uclinux_init(MachineState *machine) hw =hwsetup_init ();hwsetup_add_cpu (hw,"LM32" ,75000000 );hwsetup_add_flash (hw,"flash" , flash_base, flash_size); -hwsetup_add_ddr_sdram (hw,"ddr_sdram" , ram_base, ram_size); +hwsetup_add_ddr_sdram (hw,"ddr_sdram" , ram_base, machine->ram_size);hwsetup_add_timer (hw,"timer0" , timer0_base, timer0_irq);hwsetup_add_timer (hw,"timer1_dev_only" , timer1_base, timer1_irq);hwsetup_add_timer (hw,"timer2_dev_only" , timer2_base, timer2_irq);
@@ -288,6 +294,8 @@ static void lm32_evr_class_init(ObjectClass *oc, void *data) mc->init = lm32_evr_init; mc->is_default =1 ; mc->default_cpu_type =LM32_CPU_TYPE_NAME ("lm32-full" ); + mc->default_ram_size =64 * MiB; + mc->default_ram_id ="lm32_evr.sdram" ; }static const TypeInfo lm32_evr_type = {
@@ -304,6 +312,8 @@ static void lm32_uclinux_class_init(ObjectClass *oc, void *data) mc->init = lm32_uclinux_init; mc->is_default =0 ; mc->default_cpu_type =LM32_CPU_TYPE_NAME ("lm32-full" ); + mc->default_ram_size =64 * MiB; + mc->default_ram_id ="lm32_uclinux.sdram" ; }static const TypeInfo lm32_uclinux_type = {
Signature · 1 line
2.7.4
PATCH 48/86 lm32:milkymist: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
while at it add check for user supplied RAM size and error out if it mismatches board expected value.
--- hw/lm32/milkymist.c | 19 ++++++++++++------- 1 file changed, 12 insertions(+), 7 deletions(-)
hw/lm32/milkymist.c +12 -7
@@ -82,6 +82,7 @@ static void main_cpu_reset(void *opaque)static void milkymist_init (MachineState *machine) { +MachineClass *mc =MACHINE_GET_CLASS (machine);const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;
@@ -90,22 +91,26 @@ milkymist_init(MachineState *machine)int kernel_size;DriveInfo *dinfo;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *phys_sdram =g_new (MemoryRegion,1 );qemu_irq irq[32 ];int i;char *bios_filename;ResetInfo *reset_info; +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +/* memory map */ hwaddr flash_base =0x00000000 ;size_t flash_sector_size =128 * KiB;size_t flash_size =32 * MiB;hwaddr sdram_base =0x40000000 ; -size_t sdram_size =128 * MiB;hwaddr initrd_base = sdram_base +0x1002000 ;hwaddr cmdline_base = sdram_base +0x1000000 ; -size_t initrd_max = sdram_size -0x1002000 ; +size_t initrd_max = machine->ram_size -0x1002000 ; reset_info =g_malloc0 (sizeof (ResetInfo));
@@ -116,9 +121,7 @@ milkymist_init(MachineState *machine)cpu_lm32_set_phys_msb_ignore (env,1 ); -memory_region_allocate_system_memory (phys_sdram,NULL ,"milkymist.sdram" , - sdram_size); -memory_region_add_subregion (address_space_mem, sdram_base, phys_sdram); +memory_region_add_subregion (address_space_mem, sdram_base, machine->ram); dinfo =drive_get (IF_PFLASH ,0 ,0 );/* Numonyx JS28F256J3F105 */
@@ -183,7 +186,7 @@ milkymist_init(MachineState *machine)if (kernel_size <0 ) { kernel_size =load_image_targphys (kernel_filename, sdram_base, - sdram_size); + machine->ram_size); reset_info->bootstrap_pc = sdram_base; }
@@ -216,6 +219,8 @@ static void milkymist_machine_init(MachineClass *mc) mc->init = milkymist_init; mc->is_default =0 ; mc->default_cpu_type =LM32_CPU_TYPE_NAME ("lm32-full" ); + mc->default_ram_size =128 * MiB; + mc->default_ram_id ="milkymist.sdram" ; }DEFINE_MACHINE ("milkymist" , milkymist_machine_init)
Signature · 1 line
2.7.4
PATCH 49/86 m68k:an5206: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/m68k/an5206.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
hw/m68k/an5206.c +2 -3
@@ -33,7 +33,6 @@ static void an5206_init(MachineState *machine)uint64_t elf_entry;hwaddr entry;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); cpu =M68K_CPU (cpu_create (machine->cpu_type));
@@ -46,8 +45,7 @@ static void an5206_init(MachineState *machine) env->rambar0 =AN5206_RAMBAR_ADDR |1 ;/* DRAM at address zero */ -memory_region_allocate_system_memory (ram,NULL ,"an5206.ram" , ram_size); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* Internal SRAM. */ memory_region_init_ram (sram,NULL ,"an5206.sram" ,512 , &error_fatal);
@@ -89,6 +87,7 @@ static void an5206_machine_init(MachineClass *mc) mc->desc ="Arnewsh 5206" ; mc->init = an5206_init; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m5206" ); + mc->default_ram_id ="an5206.ram" ; }DEFINE_MACHINE ("an5206" , an5206_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 49/86] m68k:an5206: use memdev for RAM
Quoted 37 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>--- hw/m68k/an5206.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)hw/m68k/an5206.c +1
-3@@ -33,7 +33,6 @@ static void an5206_init(MachineState *machine)uint64_t elf_entry;hwaddr entry;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); cpu =M68K_CPU (cpu_create (machine->cpu_type));@@ -46,8 +45,7 @@ static void an5206_init(MachineState *machine) env->rambar0 =AN5206_RAMBAR_ADDR |1 ;/* DRAM at address zero */ -memory_region_allocate_system_memory (ram,NULL ,"an5206.ram" , ram_size); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* Internal SRAM. */ memory_region_init_ram (sram,NULL ,"an5206.sram" ,512 , &error_fatal);
hw/m68k/an5206.c static void an5206_machine_init(MachineClass *mc) · line 93
Quoted 7 lines
hw/m68k/an5206.c +1
-0@@ -89,6 +87,7 @@ static void an5206_machine_init(MachineClass *mc) mc->desc ="Arnewsh 5206" ; mc->init = an5206_init; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m5206" ); + mc->default_ram_id ="an5206.ram" ; }DEFINE_MACHINE ("an5206" , an5206_machine_init)
PATCH 50/86 m68k:mcf5208: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/m68k/mcf5208.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
hw/m68k/mcf5208.c +2 -3
@@ -234,7 +234,6 @@ static void mcf5208evb_init(MachineState *machine)qemu_irq *pic;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *rom =g_new (MemoryRegion,1 ); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); cpu =M68K_CPU (cpu_create (machine->cpu_type));
@@ -249,8 +248,7 @@ static void mcf5208evb_init(MachineState *machine)memory_region_add_subregion (address_space_mem,0x00000000 , rom);/* DRAM at 0x40000000 */ -memory_region_allocate_system_memory (ram,NULL ,"mcf5208.ram" , ram_size); -memory_region_add_subregion (address_space_mem,0x40000000 , ram); +memory_region_add_subregion (address_space_mem,0x40000000 , machine->ram);/* Internal SRAM. */ memory_region_init_ram (sram,NULL ,"mcf5208.sram" ,16 * KiB, &error_fatal);
@@ -354,6 +352,7 @@ static void mcf5208evb_machine_init(MachineClass *mc) mc->init = mcf5208evb_init; mc->is_default =1 ; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m5208" ); + mc->default_ram_id ="mcf5208.ram" ; }DEFINE_MACHINE ("mcf5208evb" , mcf5208evb_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 50/86] m68k:mcf5208: use memdev for RAM
Quoted 37 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>--- hw/m68k/mcf5208.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)hw/m68k/mcf5208.c +1
-3@@ -234,7 +234,6 @@ static void mcf5208evb_init(MachineState *machine)qemu_irq *pic;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *rom =g_new (MemoryRegion,1 ); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *sram =g_new (MemoryRegion,1 ); cpu =M68K_CPU (cpu_create (machine->cpu_type));@@ -249,8 +248,7 @@ static void mcf5208evb_init(MachineState *machine)memory_region_add_subregion (address_space_mem,0x00000000 , rom);/* DRAM at 0x40000000 */ -memory_region_allocate_system_memory (ram,NULL ,"mcf5208.ram" , ram_size); -memory_region_add_subregion (address_space_mem,0x40000000 , ram); +memory_region_add_subregion (address_space_mem,0x40000000 , machine->ram);/* Internal SRAM. */ memory_region_init_ram (sram,NULL ,"mcf5208.sram" ,16 * KiB, &error_fatal);
hw/m68k/mcf5208.c static void mcf5208evb_machine_init(MachineClass *mc) · line 358
Quoted 7 lines
hw/m68k/mcf5208.c +1
-0@@ -354,6 +352,7 @@ static void mcf5208evb_machine_init(MachineClass *mc) mc->init = mcf5208evb_init; mc->is_default =1 ; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m5208" ); + mc->default_ram_id ="mcf5208.ram" ; }DEFINE_MACHINE ("mcf5208evb" , mcf5208evb_machine_init)
PATCH 51/86 m68k:next-cube: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/m68k/next-cube.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
hw/m68k/next-cube.c +2 -3
@@ -860,7 +860,6 @@ static void next_cube_init(MachineState *machine) {M68kCPU *cpu;CPUM68KState *env; -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *rom =g_new (MemoryRegion,1 );MemoryRegion *mmiomem =g_new (MemoryRegion,1 );MemoryRegion *scrmem =g_new (MemoryRegion,1 );
@@ -893,8 +892,7 @@ static void next_cube_init(MachineState *machine)memcpy (ns->rtc.ram, rtc_ram2,32 );/* 64MB RAM starting at 0x04000000 */ -memory_region_allocate_system_memory (ram,NULL ,"next.ram" , ram_size); -memory_region_add_subregion (sysmem,0x04000000 , ram); +memory_region_add_subregion (sysmem,0x04000000 , machine->ram);/* Framebuffer */ dev =qdev_create (NULL ,TYPE_NEXTFB );
@@ -967,6 +965,7 @@ static void next_machine_class_init(ObjectClass *oc, void *data) mc->desc ="NeXT Cube" ; mc->init = next_cube_init; mc->default_ram_size =RAM_SIZE ; + mc->default_ram_id ="next.ram" ; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m68040" ); }
Signature · 1 line
2.7.4
Re: [PATCH 51/86] m68k:next-cube: use memdev for RAM
Quoted 37 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>--- hw/m68k/next-cube.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)hw/m68k/next-cube.c +1
-3@@ -860,7 +860,6 @@ static void next_cube_init(MachineState *machine) {M68kCPU *cpu;CPUM68KState *env; -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *rom =g_new (MemoryRegion,1 );MemoryRegion *mmiomem =g_new (MemoryRegion,1 );MemoryRegion *scrmem =g_new (MemoryRegion,1 );@@ -893,8 +892,7 @@ static void next_cube_init(MachineState *machine)memcpy (ns->rtc.ram, rtc_ram2,32 );/* 64MB RAM starting at 0x04000000 */ -memory_region_allocate_system_memory (ram,NULL ,"next.ram" , ram_size); -memory_region_add_subregion (sysmem,0x04000000 , ram); +memory_region_add_subregion (sysmem,0x04000000 , machine->ram);/* Framebuffer */ dev =qdev_create (NULL ,TYPE_NEXTFB );
hw/m68k/next-cube.c static void next_machine_class_init(ObjectClass *oc, void *data) · line 971
Quoted 7 lines
hw/m68k/next-cube.c +1
-0@@ -967,6 +965,7 @@ static void next_machine_class_init(ObjectClass *oc, void *data) mc->desc ="NeXT Cube" ; mc->init = next_cube_init; mc->default_ram_size =RAM_SIZE ; + mc->default_ram_id ="next.ram" ; mc->default_cpu_type =M68K_CPU_TYPE_NAME ("m68040" ); }
PATCH 52/86 mips:boston-cube: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/boston.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
hw/mips/boston.c +5 -6
@@ -427,7 +427,7 @@ static void boston_mach_init(MachineState *machine)DeviceState *dev;BostonState *s;Error *err =NULL ; -MemoryRegion *flash, *ddr, *ddr_low_alias, *lcd, *platreg; +MemoryRegion *flash, *ddr_low_alias, *lcd, *platreg;MemoryRegion *sys_mem =get_system_memory ();XilinxPCIEHost *pcie2;PCIDevice *ahci;
@@ -473,14 +473,12 @@ static void boston_mach_init(MachineState *machine)memory_region_init_rom (flash,NULL ,"boston.flash" ,128 * MiB, &err);memory_region_add_subregion_overlap (sys_mem,0x18000000 , flash,0 ); - ddr =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (ddr,NULL ,"boston.ddr" , - machine->ram_size); -memory_region_add_subregion_overlap (sys_mem,0x80000000 , ddr,0 ); +memory_region_add_subregion_overlap (sys_mem,0x80000000 , machine->ram,0 ); ddr_low_alias =g_new (MemoryRegion,1 );memory_region_init_alias (ddr_low_alias,NULL ,"boston_low.ddr" , - ddr,0 ,MIN (machine->ram_size, (256 * MiB))); + machine->ram,0 , +MIN (machine->ram_size, (256 * MiB)));memory_region_add_subregion_overlap (sys_mem,0 , ddr_low_alias,0 ); xilinx_pcie_init(sys_mem, 0,
@@ -552,6 +550,7 @@ static void boston_mach_class_init(MachineClass *mc) mc->init = boston_mach_init; mc->block_default_type =IF_IDE ; mc->default_ram_size =1 * GiB; + mc->default_ram_id ="boston.ddr" ; mc->max_cpus =16 ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("I6400" ); }
Signature · 1 line
2.7.4
Re: [PATCH 52/86] mips:boston-cube: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 44 lines
--- hw/mips/boston.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)hw/mips/boston.c +5
-6@@ -427,7 +427,7 @@ static void boston_mach_init(MachineState *machine)DeviceState *dev;BostonState *s;Error *err =NULL ; -MemoryRegion *flash, *ddr, *ddr_low_alias, *lcd, *platreg; +MemoryRegion *flash, *ddr_low_alias, *lcd, *platreg;MemoryRegion *sys_mem =get_system_memory ();XilinxPCIEHost *pcie2;PCIDevice *ahci;@@ -473,14 +473,12 @@ static void boston_mach_init(MachineState *machine)memory_region_init_rom (flash,NULL ,"boston.flash" ,128 * MiB, &err);memory_region_add_subregion_overlap (sys_mem,0x18000000 , flash,0 ); - ddr =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (ddr,NULL ,"boston.ddr" , - machine->ram_size); -memory_region_add_subregion_overlap (sys_mem,0x80000000 , ddr,0 ); +memory_region_add_subregion_overlap (sys_mem,0x80000000 , machine->ram,0 ); ddr_low_alias =g_new (MemoryRegion,1 );memory_region_init_alias (ddr_low_alias,NULL ,"boston_low.ddr" , - ddr,0 ,MIN (machine->ram_size, (256 * MiB))); + machine->ram,0 , +MIN (machine->ram_size, (256 * MiB)));memory_region_add_subregion_overlap (sys_mem,0 , ddr_low_alias,0 ); xilinx_pcie_init(sys_mem, 0,@@ -552,6 +550,7 @@ static void boston_mach_class_init(MachineClass *mc) mc->init = boston_mach_init; mc->block_default_type =IF_IDE ; mc->default_ram_size =1 * GiB; + mc->default_ram_id ="boston.ddr" ; mc->max_cpus =16 ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("I6400" ); }
PATCH 53/86 mips:mips_fulong2e: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- hw/mips/mips_fulong2e.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)
hw/mips/mips_fulong2e.c +8 -5
@@ -296,7 +296,6 @@ static void mips_fulong2e_init(MachineState *machine)MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 ); -ram_addr_t ram_size = machine->ram_size;long bios_size;uint8_t *spd_data;Error *err =NULL ;
@@ -315,10 +314,14 @@ static void mips_fulong2e_init(MachineState *machine)qemu_register_reset (main_cpu_reset, cpu);/* TODO: support more than 256M RAM as highmem */ - ram_size =256 * MiB; +if (machine->ram_size !=256 * MiB) { +error_report ("Invalid RAM size, should be %ld" ,256 * MiB); +exit (EXIT_FAILURE ); + }/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"fulong2e.ram" , ram_size); +memory_region_allocate_system_memory (ram,NULL ,"fulong2e.ram" , + machine->ram_size);memory_region_init_ram (bios,NULL ,"fulong2e.bios" ,BIOS_SIZE , &error_fatal);memory_region_set_readonly (bios, true);
@@ -332,7 +335,7 @@ static void mips_fulong2e_init(MachineState *machine)*/ if (kernel_filename) { - loaderparams.ram_size = ram_size; + loaderparams.ram_size = machine->ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename;
@@ -378,7 +381,7 @@ static void mips_fulong2e_init(MachineState *machine) }/* Populate SPD eeprom data */ - spd_data =spd_data_generate (DDR , ram_size, &err); + spd_data =spd_data_generate (DDR , machine->ram_size, &err);if (err) {warn_report_err (err); }
Signature · 1 line
2.7.4
PATCH 54/86 mips:mips_fulong2e: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/mips_fulong2e.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
hw/mips/mips_fulong2e.c +2 -4
@@ -294,7 +294,6 @@ static void mips_fulong2e_init(MachineState *machine)const char *initrd_filename = machine->initrd_filename;char *filename;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );long bios_size;uint8_t *spd_data;
@@ -320,13 +319,11 @@ static void mips_fulong2e_init(MachineState *machine) }/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"fulong2e.ram" , - machine->ram_size);memory_region_init_ram (bios,NULL ,"fulong2e.bios" ,BIOS_SIZE , &error_fatal);memory_region_set_readonly (bios, true); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);memory_region_add_subregion (address_space_mem,0x1fc00000LL , bios);/*
@@ -402,6 +399,7 @@ static void mips_fulong2e_machine_init(MachineClass *mc) mc->block_default_type =IF_IDE ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("Loongson-2E" ); mc->default_ram_size =256 * MiB; + mc->default_ram_id ="fulong2e.ram" ; }DEFINE_MACHINE ("fulong2e" , mips_fulong2e_machine_init)
Signature · 1 line
2.7.4
PATCH 55/86 mips:mips_jazz: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/mips_jazz.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
hw/mips/mips_jazz.c +3 -4
@@ -159,7 +159,6 @@ static void mips_jazz_init(MachineState *machine,ISABus *isa_bus;ISADevice *pit;DriveInfo *fds[MAX_FD ]; -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );MemoryRegion *bios2 =g_new (MemoryRegion,1 );SysBusESPState *sysbus_esp;
@@ -191,9 +190,7 @@ static void mips_jazz_init(MachineState *machine, cc->do_transaction_failed = mips_jazz_do_transaction_failed;/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"mips_jazz.ram" , - machine->ram_size); -memory_region_add_subregion (address_space,0 , ram); +memory_region_add_subregion (address_space,0 , machine->ram);memory_region_init_ram (bios,NULL ,"mips_jazz.bios" ,MAGNUM_BIOS_SIZE , &error_fatal);
@@ -392,6 +389,7 @@ static void mips_magnum_class_init(ObjectClass *oc, void *data) mc->init = mips_magnum_init; mc->block_default_type =IF_SCSI ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("R4000" ); + mc->default_ram_id ="mips_jazz.ram" ; }static const TypeInfo mips_magnum_type = {
@@ -408,6 +406,7 @@ static void mips_pica61_class_init(ObjectClass *oc, void *data) mc->init = mips_pica61_init; mc->block_default_type =IF_SCSI ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("R4000" ); + mc->default_ram_id ="mips_jazz.ram" ; }static const TypeInfo mips_pica61_type = {
Signature · 1 line
2.7.4
Re: [PATCH 55/86] mips:mips_jazz: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 44 lines
--- hw/mips/mips_jazz.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)hw/mips/mips_jazz.c +3
-4@@ -159,7 +159,6 @@ static void mips_jazz_init(MachineState *machine,ISABus *isa_bus;ISADevice *pit;DriveInfo *fds[MAX_FD ]; -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );MemoryRegion *bios2 =g_new (MemoryRegion,1 );SysBusESPState *sysbus_esp;@@ -191,9 +190,7 @@ static void mips_jazz_init(MachineState *machine, cc->do_transaction_failed = mips_jazz_do_transaction_failed;/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"mips_jazz.ram" , - machine->ram_size); -memory_region_add_subregion (address_space,0 , ram); +memory_region_add_subregion (address_space,0 , machine->ram);memory_region_init_ram (bios,NULL ,"mips_jazz.bios" ,MAGNUM_BIOS_SIZE , &error_fatal);@@ -392,6 +389,7 @@ static void mips_magnum_class_init(ObjectClass *oc, void *data) mc->init = mips_magnum_init; mc->block_default_type =IF_SCSI ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("R4000" ); + mc->default_ram_id ="mips_jazz.ram" ; }static const TypeInfo mips_magnum_type = {@@ -408,6 +406,7 @@ static void mips_pica61_class_init(ObjectClass *oc, void *data) mc->init = mips_pica61_init; mc->block_default_type =IF_SCSI ; mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("R4000" ); + mc->default_ram_id ="mips_jazz.ram" ; }static const TypeInfo mips_pica61_type = {
PATCH 56/86 mips:mips_malta: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/mips_malta.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
hw/mips/mips_malta.c +4 -6
@@ -1223,7 +1223,6 @@ void mips_malta_init(MachineState *machine)char *filename;PFlashCFI01 *fl;MemoryRegion *system_memory =get_system_memory (); -MemoryRegion *ram_high =g_new (MemoryRegion,1 );MemoryRegion *ram_low_preio =g_new (MemoryRegion,1 );MemoryRegion *ram_low_postio;MemoryRegion *bios, *bios_copy =g_new (MemoryRegion,1 );
@@ -1261,13 +1260,11 @@ void mips_malta_init(MachineState *machine) }/* register RAM at high address where it is undisturbed by IO */ -memory_region_allocate_system_memory (ram_high,NULL ,"mips_malta.ram" , - ram_size); -memory_region_add_subregion (system_memory,0x80000000 , ram_high); +memory_region_add_subregion (system_memory,0x80000000 , machine->ram);/* alias for pre IO hole access */ memory_region_init_alias (ram_low_preio,NULL ,"mips_malta_low_preio.ram" , - ram_high,0 ,MIN (ram_size,256 * MiB)); + machine->ram,0 ,MIN (ram_size,256 * MiB));memory_region_add_subregion (system_memory,0 , ram_low_preio);/* alias for post IO hole access, if there is enough RAM */
@@ -1275,7 +1272,7 @@ void mips_malta_init(MachineState *machine) ram_low_postio =g_new (MemoryRegion,1 );memory_region_init_alias (ram_low_postio,NULL ,"mips_malta_low_postio.ram" , - ram_high,512 * MiB, + machine->ram,512 * MiB, ram_size -512 * MiB);memory_region_add_subregion (system_memory,512 * MiB, ram_low_postio);
@@ -1447,6 +1444,7 @@ static void mips_malta_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif + mc->default_ram_id ="mips_malta.ram" ; }DEFINE_MACHINE ("malta" , mips_malta_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 56/86] mips:mips_malta: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 50 lines
--- hw/mips/mips_malta.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)hw/mips/mips_malta.c +4
-6@@ -1223,7 +1223,6 @@ void mips_malta_init(MachineState *machine)char *filename;PFlashCFI01 *fl;MemoryRegion *system_memory =get_system_memory (); -MemoryRegion *ram_high =g_new (MemoryRegion,1 );MemoryRegion *ram_low_preio =g_new (MemoryRegion,1 );MemoryRegion *ram_low_postio;MemoryRegion *bios, *bios_copy =g_new (MemoryRegion,1 );@@ -1261,13 +1260,11 @@ void mips_malta_init(MachineState *machine) }/* register RAM at high address where it is undisturbed by IO */ -memory_region_allocate_system_memory (ram_high,NULL ,"mips_malta.ram" , - ram_size); -memory_region_add_subregion (system_memory,0x80000000 , ram_high); +memory_region_add_subregion (system_memory,0x80000000 , machine->ram);/* alias for pre IO hole access */ memory_region_init_alias (ram_low_preio,NULL ,"mips_malta_low_preio.ram" , - ram_high,0 ,MIN (ram_size,256 * MiB)); + machine->ram,0 ,MIN (ram_size,256 * MiB));memory_region_add_subregion (system_memory,0 , ram_low_preio);/* alias for post IO hole access, if there is enough RAM */ @@ -1275,7 +1272,7 @@ void mips_malta_init(MachineState *machine) ram_low_postio =g_new (MemoryRegion,1 );memory_region_init_alias (ram_low_postio,NULL ,"mips_malta_low_postio.ram" , - ram_high,512 * MiB, + machine->ram,512 * MiB, ram_size -512 * MiB);memory_region_add_subregion (system_memory,512 * MiB, ram_low_postio);@@ -1447,6 +1444,7 @@ static void mips_malta_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif + mc->default_ram_id ="mips_malta.ram" ; }DEFINE_MACHINE ("malta" , mips_malta_machine_init)
PATCH 57/86 mips:mips_mipssim: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/mips_mipssim.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
hw/mips/mips_mipssim.c +3 -6
@@ -142,14 +142,12 @@ static void mipsnet_init(int base, qemu_irq irq, NICInfo *nd)static void mips_mipssim_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;char *filename;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *isa =g_new (MemoryRegion,1 ); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );MIPSCPU *cpu;CPUMIPSState *env;
@@ -166,13 +164,11 @@ mips_mipssim_init(MachineState *machine)qemu_register_reset (main_cpu_reset, reset_info);/* Allocate RAM. */ -memory_region_allocate_system_memory (ram,NULL ,"mips_mipssim.ram" , - ram_size);memory_region_init_ram (bios,NULL ,"mips_mipssim.bios" ,BIOS_SIZE , &error_fatal);memory_region_set_readonly (bios, true); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* Map the BIOS / boot exception handler. */ memory_region_add_subregion (address_space_mem,0x1fc00000LL , bios);
@@ -199,7 +195,7 @@ mips_mipssim_init(MachineState *machine) }if (kernel_filename) { - loaderparams.ram_size = ram_size; + loaderparams.ram_size = machine->ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename;
@@ -237,6 +233,7 @@ static void mips_mipssim_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif + mc->default_ram_id ="mips_mipssim.ram" ; }DEFINE_MACHINE ("mipssim" , mips_mipssim_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 57/86] mips:mips_mipssim: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 56 lines
--- hw/mips/mips_mipssim.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)hw/mips/mips_mipssim.c +3
-6@@ -142,14 +142,12 @@ static void mipsnet_init(int base, qemu_irq irq, NICInfo *nd)static void mips_mipssim_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;char *filename;MemoryRegion *address_space_mem =get_system_memory ();MemoryRegion *isa =g_new (MemoryRegion,1 ); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );MIPSCPU *cpu;CPUMIPSState *env;@@ -166,13 +164,11 @@ mips_mipssim_init(MachineState *machine)qemu_register_reset (main_cpu_reset, reset_info);/* Allocate RAM. */ -memory_region_allocate_system_memory (ram,NULL ,"mips_mipssim.ram" , - ram_size);memory_region_init_ram (bios,NULL ,"mips_mipssim.bios" ,BIOS_SIZE , &error_fatal);memory_region_set_readonly (bios, true); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);/* Map the BIOS / boot exception handler. */ memory_region_add_subregion (address_space_mem,0x1fc00000LL , bios);@@ -199,7 +195,7 @@ mips_mipssim_init(MachineState *machine) }if (kernel_filename) { - loaderparams.ram_size = ram_size; + loaderparams.ram_size = machine->ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename;@@ -237,6 +233,7 @@ static void mips_mipssim_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif + mc->default_ram_id ="mips_mipssim.ram" ; }DEFINE_MACHINE ("mipssim" , mips_mipssim_machine_init)
PATCH 58/86 mips:mips_r4k: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/mips/mips_r4k.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
hw/mips/mips_r4k.c +4 -8
@@ -171,13 +171,11 @@ static const int sector_len = 32 * KiB;static void mips_r4k_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;char *filename;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios;MemoryRegion *iomem =g_new (MemoryRegion,1 );MemoryRegion *isa_io =g_new (MemoryRegion,1 );
@@ -203,14 +201,12 @@ void mips_r4k_init(MachineState *machine)qemu_register_reset (main_cpu_reset, reset_info);/* allocate RAM */ -if (ram_size >256 * MiB) { +if (machine->ram_size >256 * MiB) {error_report ("Too much memory for this machine: %" PRId64"MB," " maximum 256MB" , ram_size / MiB);exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"mips_r4k.ram" , ram_size); - -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);memory_region_init_io (iomem,NULL , &mips_qemu_ops,NULL ,"mips-qemu" ,0x10000 );
@@ -261,7 +257,7 @@ void mips_r4k_init(MachineState *machine)g_free (filename);if (kernel_filename) { - loaderparams.ram_size = ram_size; + loaderparams.ram_size = machine->ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename;
@@ -316,7 +312,7 @@ static void mips_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif - + mc->default_ram_id ="mips_r4k.ram" ; }DEFINE_MACHINE ("mips" , mips_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 58/86] mips:mips_r4k: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 58 lines
--- hw/mips/mips_r4k.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)hw/mips/mips_r4k.c +4
-8@@ -171,13 +171,11 @@ static const int sector_len = 32 * KiB;static void mips_r4k_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;char *filename;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios;MemoryRegion *iomem =g_new (MemoryRegion,1 );MemoryRegion *isa_io =g_new (MemoryRegion,1 );@@ -203,14 +201,12 @@ void mips_r4k_init(MachineState *machine)qemu_register_reset (main_cpu_reset, reset_info);/* allocate RAM */ -if (ram_size >256 * MiB) { +if (machine->ram_size >256 * MiB) {error_report ("Too much memory for this machine: %" PRId64"MB," " maximum 256MB" , ram_size / MiB);exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"mips_r4k.ram" , ram_size); - -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram);memory_region_init_io (iomem,NULL , &mips_qemu_ops,NULL ,"mips-qemu" ,0x10000 );@@ -261,7 +257,7 @@ void mips_r4k_init(MachineState *machine)g_free (filename);if (kernel_filename) { - loaderparams.ram_size = ram_size; + loaderparams.ram_size = machine->ram_size; loaderparams.kernel_filename = kernel_filename; loaderparams.kernel_cmdline = kernel_cmdline; loaderparams.initrd_filename = initrd_filename;@@ -316,7 +312,7 @@ static void mips_machine_init(MachineClass *mc)#else mc->default_cpu_type =MIPS_CPU_TYPE_NAME ("24Kf" );#endif - + mc->default_ram_id ="mips_r4k.ram" ; }DEFINE_MACHINE ("mips" , mips_machine_init)
PATCH 59/86 ppc:e500: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
While at it, replace usage of global ram_size with machine->ram_size
--- hw/ppc/e500.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
hw/ppc/e500.c +9 -7
@@ -906,12 +906,14 @@ void ppce500_init(MachineState *machine) env = firstenv; -/* Fixup Memory size on a alignment boundary */ - ram_size &= ~(RAM_SIZES_ALIGN -1 ); - machine->ram_size = ram_size; +if (!QEMU_IS_ALIGNED (machine->ram_size,RAM_SIZES_ALIGN )) { +error_report ("RAM size must be multiple of %ld" ,RAM_SIZES_ALIGN ); +exit (EXIT_FAILURE ); + }/* Register Memory */ -memory_region_allocate_system_memory (ram,NULL ,"mpc8544ds.ram" , ram_size); +memory_region_allocate_system_memory (ram,NULL ,"mpc8544ds.ram" , + machine->ram_size);memory_region_add_subregion (address_space_mem,0 , ram); dev =qdev_create (NULL ,"e500-ccsr" );
@@ -1083,7 +1085,7 @@ void ppce500_init(MachineState *machine) kernel_base = cur_base; kernel_size =load_image_targphys (machine->kernel_filename, cur_base, - ram_size - cur_base); + machine->ram_size - cur_base);if (kernel_size <0 ) {error_report ("could not load kernel '%s'" , machine->kernel_filename);
@@ -1097,7 +1099,7 @@ void ppce500_init(MachineState *machine)if (machine->initrd_filename) { initrd_base = (cur_base +INITRD_LOAD_PAD ) & ~INITRD_PAD_MASK ; initrd_size =load_image_targphys (machine->initrd_filename, initrd_base, - ram_size - initrd_base); + machine->ram_size - initrd_base);if (initrd_size <0 ) { error_report("could not load initial ram disk '%s'",
@@ -1115,7 +1117,7 @@ void ppce500_init(MachineState *machine)* ensures enough space between kernel and initrd. */ dt_base = (loadaddr + payload_size +DTC_LOAD_PAD ) & ~DTC_PAD_MASK ; -if (dt_base +DTB_MAX_SIZE > ram_size) { +if (dt_base +DTB_MAX_SIZE > machine->ram_size) {error_report ("not enough memory for device tree" );exit (1 ); }
Signature · 1 line
2.7.4
PATCH 60/86 ppc:e500: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/e500.c | 5 +---- hw/ppc/e500plat.c | 1 + hw/ppc/mpc8544ds.c | 1 + 3 files changed, 3 insertions(+), 4 deletions(-)
hw/ppc/e500.c +1 -4
@@ -831,7 +831,6 @@ static void ppce500_power_off(void *opaque, int line, int on)void ppce500_init (MachineState *machine) {MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );PPCE500MachineState *pms =PPCE500_MACHINE (machine);const PPCE500MachineClass *pmc =PPCE500_MACHINE_GET_CLASS (machine);PCIBus *pci_bus;
@@ -912,9 +911,7 @@ void ppce500_init(MachineState *machine) }/* Register Memory */ -memory_region_allocate_system_memory (ram,NULL ,"mpc8544ds.ram" , - machine->ram_size); -memory_region_add_subregion (address_space_mem,0 , ram); +memory_region_add_subregion (address_space_mem,0 , machine->ram); dev =qdev_create (NULL ,"e500-ccsr" ); object_property_add_child(qdev_get_machine(), "e500-ccsr",
hw/ppc/e500plat.c +1 -0
@@ -97,6 +97,7 @@ static void e500plat_machine_class_init(ObjectClass *oc, void *data) mc->init = e500plat_init; mc->max_cpus =32 ; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("e500v2_v30" ); + mc->default_ram_id ="mpc8544ds.ram" ;machine_class_allow_dynamic_sysbus_dev (mc,TYPE_ETSEC_COMMON ); }
hw/ppc/mpc8544ds.c +1 -0
@@ -55,6 +55,7 @@ static void e500plat_machine_class_init(ObjectClass *oc, void *data) mc->init = mpc8544ds_init; mc->max_cpus =15 ; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("e500v2_v30" ); + mc->default_ram_id ="mpc8544ds.ram" ; }#define TYPE_MPC8544DS_MACHINE MACHINE_TYPE_NAME("mpc8544ds")
Signature · 1 line
2.7.4
PATCH 61/86 ppc:mac_newworld: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/mac_newworld.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
hw/ppc/mac_newworld.c +3 -3
@@ -118,7 +118,7 @@ static void ppc_core99_init(MachineState *machine)char *filename;IrqLines *openpic_irqs;int linux_boot, i, j, k; -MemoryRegion *ram =g_new (MemoryRegion,1 ), *bios =g_new (MemoryRegion,1 ); +MemoryRegion *bios =g_new (MemoryRegion,1 );hwaddr kernel_base, initrd_base, cmdline_base =0 ;long kernel_size, initrd_size;UNINHostState *uninorth_pci;
@@ -152,8 +152,7 @@ static void ppc_core99_init(MachineState *machine) }/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"ppc_core99.ram" , ram_size); -memory_region_add_subregion (get_system_memory (),0 , ram); +memory_region_add_subregion (get_system_memory (),0 , machine->ram);/* allocate and load BIOS */ memory_region_init_ram(bios, NULL, "ppc_core99.bios", BIOS_SIZE,
@@ -586,6 +585,7 @@ static void core99_machine_class_init(ObjectClass *oc, void *data)#else mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("7400_v2.9" );#endif + mc->default_ram_id ="ppc_core99.ram" ; mc->ignore_boot_device_suffixes = true; fwc->get_dev_path = core99_fw_dev_path; }
Signature · 1 line
2.7.4
PATCH 62/86 ppc:mac_oldworld: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/mac_oldworld.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
hw/ppc/mac_oldworld.c +2 -4
@@ -91,7 +91,6 @@ static void ppc_heathrow_init(MachineState *machine)CPUPPCState *env =NULL ;char *filename;int linux_boot, i; -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *bios =g_new (MemoryRegion,1 );uint32_t kernel_base, initrd_base, cmdline_base =0 ;int32_t kernel_size, initrd_size;
@@ -127,9 +126,7 @@ static void ppc_heathrow_init(MachineState *machine)exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"ppc_heathrow.ram" , - ram_size); -memory_region_add_subregion (sysmem,0 , ram); +memory_region_add_subregion (sysmem,0 , machine->ram);/* allocate and load BIOS */ memory_region_init_ram(bios, NULL, "ppc_heathrow.bios", BIOS_SIZE,
@@ -446,6 +443,7 @@ static void heathrow_class_init(ObjectClass *oc, void *data) mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("750_v3.1" ); mc->default_display ="std" ; mc->ignore_boot_device_suffixes = true; + mc->default_ram_id ="ppc_heathrow.ram" ; fwc->get_dev_path = heathrow_fw_dev_path; }
Signature · 1 line
2.7.4
PATCH 63/86 ppc:pnv: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/pnv.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
hw/ppc/pnv.c +2 -6
@@ -676,7 +676,6 @@ static void pnv_init(MachineState *machine) {PnvMachineState *pnv =PNV_MACHINE (machine);MachineClass *mc =MACHINE_GET_CLASS (machine); -MemoryRegion *ram;char *fw_filename;long fw_size;int i;
@@ -688,11 +687,7 @@ static void pnv_init(MachineState *machine)if (machine->ram_size < (1 * GiB)) {warn_report ("skiboot may not work with < 1GB of RAM" ); } - - ram =g_new (MemoryRegion,1 ); -memory_region_allocate_system_memory (ram,NULL ,"pnv.ram" , - machine->ram_size); -memory_region_add_subregion (get_system_memory (),0 , ram); +memory_region_add_subregion (get_system_memory (),0 , machine->ram);/* * Create our simple PNOR device
@@ -1811,6 +1806,7 @@ static void pnv_machine_class_init(ObjectClass *oc, void *data)* enough to fit the maximum initrd size at it's load address */ mc->default_ram_size =INITRD_LOAD_ADDR +INITRD_MAX_SIZE ; + mc->default_ram_id ="pnv.ram" ; ispc->print_info = pnv_pic_print_info;pnv_machine_class_props_init (oc);
Signature · 1 line
2.7.4
PATCH 64/86 ppc:ppc405_boards: add RAM size checks
In reply to Igor MammedovIf user provided non-sense RAM size, board will ignore it and continue running with fixed RAM size.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix CLI.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
PS:
move fixed RAM size into mc->default_ram_size, so that generic code will know how much to allocate.
--- hw/ppc/ppc405_boards.c | 36 +++++++++++++++++++++++------------- 1 file changed, 23 insertions(+), 13 deletions(-)
hw/ppc/ppc405_boards.c +23 -13
@@ -137,7 +137,7 @@ static void ref405ep_fpga_init(MemoryRegion *sysmem, uint32_t base)static void ref405ep_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size; +MachineClass *mc =MACHINE_GET_CLASS (machine);const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;
@@ -161,15 +161,20 @@ static void ref405ep_init(MachineState *machine)DriveInfo *dinfo;MemoryRegion *sysmem =get_system_memory (); +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + } +/* XXX: fix this */ memory_region_allocate_system_memory (&ram_memories[0 ],NULL ,"ef405ep.ram" , -0x08000000 ); + machine->ram_size); ram_bases[0 ] =0 ; - ram_sizes[0 ] =0x08000000 ; + ram_sizes[0 ] = machine->ram_size;memory_region_init (&ram_memories[1 ],NULL ,"ef405ep.ram1" ,0 ); ram_bases[1 ] =0x00000000 ; ram_sizes[1 ] =0x00000000 ; - ram_size =128 * MiB; env =ppc405ep_init (sysmem, ram_memories, ram_bases, ram_sizes,33333333 , &pic, kernel_filename ==NULL ?0 :1 );/* allocate SRAM */
@@ -227,7 +232,7 @@ static void ref405ep_init(MachineState *machine)if (linux_boot) {memset (&bd,0 ,sizeof (bd)); bd.bi_memstart =0x00000000 ; - bd.bi_memsize = ram_size; + bd.bi_memsize = machine->ram_size; bd.bi_flashstart = -bios_size; bd.bi_flashsize = -bios_size; bd.bi_flashoffset =0 ;
@@ -255,7 +260,7 @@ static void ref405ep_init(MachineState *machine) kernel_base =KERNEL_LOAD_ADDR ;/* now we can load the kernel */ kernel_size =load_image_targphys (kernel_filename, kernel_base, - ram_size - kernel_base); + machine->ram_size - kernel_base);if (kernel_size <0 ) {error_report ("could not load kernel '%s'" , kernel_filename);exit (1 );
@@ -266,7 +271,7 @@ static void ref405ep_init(MachineState *machine)if (initrd_filename) { initrd_base =INITRD_LOAD_ADDR ; initrd_size =load_image_targphys (initrd_filename, initrd_base, - ram_size - initrd_base); + machine->ram_size - initrd_base);if (initrd_size <0 ) {error_report ("could not load initial ram disk '%s'" , initrd_filename);
@@ -304,6 +309,7 @@ static void ref405ep_class_init(ObjectClass *oc, void *data) mc->desc ="ref405ep" ; mc->init = ref405ep_init; + mc->default_ram_size =0x08000000 ; }static const TypeInfo ref405ep_type = {
@@ -408,7 +414,7 @@ static void taihu_cpld_init(MemoryRegion *sysmem, uint32_t base)static void taihu_405ep_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size; +MachineClass *mc =MACHINE_GET_CLASS (machine);const char *kernel_filename = machine->kernel_filename;const char *initrd_filename = machine->initrd_filename;char *filename;
@@ -425,10 +431,13 @@ static void taihu_405ep_init(MachineState *machine)int fl_idx;DriveInfo *dinfo; -/* RAM is soldered to the board so the size cannot be changed */ - ram_size =0x08000000 ; +if (machine->ram_size != mc->default_ram_size) { +error_report ("Invalid RAM size, should be %" PRIi64" Bytes" , + mc->default_ram_size); +exit (EXIT_FAILURE ); + }memory_region_allocate_system_memory (ram,NULL ,"taihu_405ep.ram" , - ram_size); + machine->ram_size); ram_bases[0 ] =0 ; ram_sizes[0 ] =0x04000000 ;
@@ -500,7 +509,7 @@ static void taihu_405ep_init(MachineState *machine) kernel_base =KERNEL_LOAD_ADDR ;/* now we can load the kernel */ kernel_size =load_image_targphys (kernel_filename, kernel_base, - ram_size - kernel_base); + machine->ram_size - kernel_base);if (kernel_size <0 ) {error_report ("could not load kernel '%s'" , kernel_filename);exit (1 );
@@ -509,7 +518,7 @@ static void taihu_405ep_init(MachineState *machine)if (initrd_filename) { initrd_base =INITRD_LOAD_ADDR ; initrd_size =load_image_targphys (initrd_filename, initrd_base, - ram_size - initrd_base); + machine->ram_size - initrd_base);if (initrd_size <0 ) {error_report ("could not load initial ram disk '%s'" , initrd_filename);
@@ -533,6 +542,7 @@ static void taihu_class_init(ObjectClass *oc, void *data) mc->desc ="taihu" ; mc->init = taihu_405ep_init; + mc->default_ram_size =0x08000000 ; }static const TypeInfo taihu_type = {
Signature · 1 line
2.7.4
PATCH 65/86 ppc:ppc405_boards: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
PS:
in ref405ep alias RAM into ram_memories[] to avoid re-factoring its user ppc405ep_init(), which would be invasive and out of scope this patch.
--- hw/ppc/ppc405_boards.c | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)
hw/ppc/ppc405_boards.c +6 -7
@@ -168,8 +168,8 @@ static void ref405ep_init(MachineState *machine) }/* XXX: fix this */ -memory_region_allocate_system_memory (&ram_memories[0 ],NULL ,"ef405ep.ram" , - machine->ram_size); +memory_region_init_alias (&ram_memories[0 ],NULL ,"ef405ep.ram.alias" , + machine->ram,0 , machine->ram_size); ram_bases[0 ] =0 ; ram_sizes[0 ] = machine->ram_size;memory_region_init (&ram_memories[1 ],NULL ,"ef405ep.ram1" ,0 );
@@ -310,6 +310,7 @@ static void ref405ep_class_init(ObjectClass *oc, void *data) mc->desc ="ref405ep" ; mc->init = ref405ep_init; mc->default_ram_size =0x08000000 ; + mc->default_ram_id ="ef405ep.ram" ; }static const TypeInfo ref405ep_type = {
@@ -422,7 +423,6 @@ static void taihu_405ep_init(MachineState *machine)MemoryRegion *sysmem =get_system_memory ();MemoryRegion *bios;MemoryRegion *ram_memories =g_new (MemoryRegion,2 ); -MemoryRegion *ram =g_malloc0 (sizeof (*ram));hwaddr ram_bases[2 ], ram_sizes[2 ];long bios_size;target_ulong kernel_base, initrd_base;
@@ -436,18 +436,16 @@ static void taihu_405ep_init(MachineState *machine) mc->default_ram_size);exit (EXIT_FAILURE ); } -memory_region_allocate_system_memory (ram,NULL ,"taihu_405ep.ram" , - machine->ram_size); ram_bases[0 ] =0 ; ram_sizes[0 ] =0x04000000 ;memory_region_init_alias (&ram_memories[0 ],NULL , -"taihu_405ep.ram-0" , ram, ram_bases[0 ], +"taihu_405ep.ram-0" , machine->ram, ram_bases[0 ], ram_sizes[0 ]); ram_bases[1 ] =0x04000000 ; ram_sizes[1 ] =0x04000000 ;memory_region_init_alias (&ram_memories[1 ],NULL , -"taihu_405ep.ram-1" , ram, ram_bases[1 ], +"taihu_405ep.ram-1" , machine->ram, ram_bases[1 ], ram_sizes[1 ]);ppc405ep_init (sysmem, ram_memories, ram_bases, ram_sizes,33333333 , &pic, kernel_filename ==NULL ?0 :1 );
@@ -543,6 +541,7 @@ static void taihu_class_init(ObjectClass *oc, void *data) mc->desc ="taihu" ; mc->init = taihu_405ep_init; mc->default_ram_size =0x08000000 ; + mc->default_ram_id ="ef405ep.ram" ; }static const TypeInfo taihu_type = {
Signature · 1 line
2.7.4
PATCH 66/86 ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
In reply to Igor MammedovIf user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.
Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
--- include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)
include/hw/ppc/ppc4xx.h +4 -5
@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr); -ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]); void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks, MemoryRegion ram_memories[],
hw/ppc/ppc440_bamboo.c +4 -7
@@ -162,7 +162,6 @@ static void main_cpu_reset(void *opaque)static void bamboo_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;
@@ -207,10 +206,8 @@ static void bamboo_init(MachineState *machine)/* SDRAM controller */ memset (ram_bases,0 ,sizeof (ram_bases));memset (ram_sizes,0 ,sizeof (ram_sizes)); - ram_size =ppc4xx_sdram_adjust (ram_size,PPC440EP_SDRAM_NR_BANKS , - ram_memories, - ram_bases, ram_sizes, - ppc440ep_sdram_bank_sizes); +ppc4xx_sdram_adjust (ram_size,PPC440EP_SDRAM_NR_BANKS , ram_memories, + ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes);/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */ ppc4xx_sdram_init (env, pic[14 ],PPC440EP_SDRAM_NR_BANKS , ram_memories, ram_bases, ram_sizes,1 );
@@ -272,7 +269,7 @@ static void bamboo_init(MachineState *machine)/* Load initrd. */ if (initrd_filename) { initrd_size =load_image_targphys (initrd_filename,RAMDISK_ADDR , - ram_size -RAMDISK_ADDR ); + machine->ram_size -RAMDISK_ADDR );if (initrd_size <0 ) { error_report("could not load ram disk '%s' at %x",
@@ -283,7 +280,7 @@ static void bamboo_init(MachineState *machine)/* If we're loading a kernel directly, we must load the device tree too. */ if (kernel_filename) { -if (bamboo_load_device_tree (FDT_ADDR , ram_size,RAMDISK_ADDR , +if (bamboo_load_device_tree (FDT_ADDR , machine->ram_size,RAMDISK_ADDR , initrd_size, kernel_cmdline) <0 ) {error_report ("couldn't load device tree" );exit (1 );
hw/ppc/ppc4xx_devs.c +16 -10
@@ -673,11 +673,10 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,* The 4xx SDRAM controller supports a small number of banks, and each bank * must be one of a small set of sizes. The number of banks and the supported * sizes varies by SoC. */ -ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]) +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]) {MemoryRegion *ram =g_malloc0 (sizeof (*ram));ram_addr_t size_left = ram_size;
@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } - ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB); +char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s); + s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s); +g_free (s); +exit (EXIT_FAILURE ); }memory_region_allocate_system_memory (ram,NULL ,"ppc4xx.sdram" , ram_size);
@@ -725,8 +733,6 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } } - -return ram_size; }/*****************************************************************************/
hw/ppc/sam460ex.c +2 -3
@@ -324,9 +324,8 @@ static void sam460ex_init(MachineState *machine)/* SDRAM controller */ /* put all RAM on first bank because board has one slot * and firmware only checks that */ - machine->ram_size =ppc4xx_sdram_adjust (machine->ram_size,1 , - ram_memories, ram_bases, ram_sizes, - ppc460ex_sdram_bank_sizes); +ppc4xx_sdram_adjust (machine->ram_size,1 , ram_memories, ram_bases, + ram_sizes, ppc460ex_sdram_bank_sizes);/* FIXME: does 460EX have ECC interrupts? */ ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
Signature · 1 line
2.7.4
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr);
include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]);
With this change this function does not adjust ram size any more so it may need to be renamed, e.g. ppc4xx_sdram_banks or something else.
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
(or without curly braces at your preference).
This is inconvenient for the user because it worked whatever number they've given but now they have to do the math. So it suggests that what you're replacing this with may not support all the existing use cases. If that can't be fixed to allow checking and changing ram size (maybe via a callback in board code similar to above adjust function returning adjusted size) it may be OK to drop this convenience for the sake of cleaning up code elsewhere.
Regards,
BALATON Zoltan
Quoted 114 lines
include/hw/ppc/ppc4xx.h +0
-0void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks, MemoryRegion ram_memories[],hw/ppc/ppc440_bamboo.c +4
-7@@ -162,7 +162,6 @@ static void main_cpu_reset(void *opaque)static void bamboo_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;@@ -207,10 +206,8 @@ static void bamboo_init(MachineState *machine)/* SDRAM controller */ memset (ram_bases,0 ,sizeof (ram_bases));memset (ram_sizes,0 ,sizeof (ram_sizes)); - ram_size =ppc4xx_sdram_adjust (ram_size,PPC440EP_SDRAM_NR_BANKS , - ram_memories, - ram_bases, ram_sizes, - ppc440ep_sdram_bank_sizes); +ppc4xx_sdram_adjust (ram_size,PPC440EP_SDRAM_NR_BANKS , ram_memories, + ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes);/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */ ppc4xx_sdram_init (env, pic[14 ],PPC440EP_SDRAM_NR_BANKS , ram_memories, ram_bases, ram_sizes,1 );@@ -272,7 +269,7 @@ static void bamboo_init(MachineState *machine)/* Load initrd. */ if (initrd_filename) { initrd_size =load_image_targphys (initrd_filename,RAMDISK_ADDR , - ram_size -RAMDISK_ADDR ); + machine->ram_size -RAMDISK_ADDR );if (initrd_size <0 ) { error_report("could not load ram disk '%s' at %x",@@ -283,7 +280,7 @@ static void bamboo_init(MachineState *machine)/* If we're loading a kernel directly, we must load the device tree too. */ if (kernel_filename) { -if (bamboo_load_device_tree (FDT_ADDR , ram_size,RAMDISK_ADDR , +if (bamboo_load_device_tree (FDT_ADDR , machine->ram_size,RAMDISK_ADDR , initrd_size, kernel_cmdline) <0 ) {error_report ("couldn't load device tree" );exit (1 );hw/ppc/ppc4xx_devs.c +16
-10@@ -673,11 +673,10 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,* The 4xx SDRAM controller supports a small number of banks, and each bank * must be one of a small set of sizes. The number of banks and the supported * sizes varies by SoC. */ -ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]) +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]) {MemoryRegion *ram =g_malloc0 (sizeof (*ram));ram_addr_t size_left = ram_size;@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } - ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB); +char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s); + s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s); +g_free (s); +exit (EXIT_FAILURE ); }memory_region_allocate_system_memory (ram,NULL ,"ppc4xx.sdram" , ram_size);@@ -725,8 +733,6 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } } - -return ram_size; }/*****************************************************************************/ hw/ppc/sam460ex.c +2
-3@@ -324,9 +324,8 @@ static void sam460ex_init(MachineState *machine)/* SDRAM controller */ /* put all RAM on first bank because board has one slot * and firmware only checks that */ - machine->ram_size =ppc4xx_sdram_adjust (machine->ram_size,1 , - ram_memories, ram_bases, ram_sizes, - ppc460ex_sdram_bank_sizes); +ppc4xx_sdram_adjust (machine->ram_size,1 , ram_memories, ram_bases, + ram_sizes, ppc460ex_sdram_bank_sizes);/* FIXME: does 460EX have ECC interrupts? */ ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
Quoted 37 lines · BALATON Zoltan
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h| 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++---4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs, uint32_t dcr_base, int has_ssr, int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, - MemoryRegion ram_memories[], - hwaddr ram_bases[], - hwaddr ram_sizes[], - const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, + MemoryRegion ram_memories[], + hwaddr ram_bases[], hwaddr ram_sizes[], + const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.
Quoted 3 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
Or split in 2 patches.
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
Quoted 38 lines · Philippe Mathieu-Daudé
Quoted 37 lines · BALATON Zoltan
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h| 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++---4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs, uint32_t dcr_base, int has_ssr, int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, - MemoryRegion ram_memories[], - hwaddr ram_bases[], - hwaddr ram_sizes[], - const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, + MemoryRegion ram_memories[], + hwaddr ram_bases[], hwaddr ram_sizes[], + const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.
Quoted 5 lines
Quoted 3 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
Or split in 2 patches.
This is mainly patching a common function used by both so I think it's OK to do in one patch.
Regards,
BALATON Zoltan
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
In reply to BALATON ZoltanQuoted 38 lines · On Wed, 1 Jan 2020 12:54:37 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.
Quoted 5 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
(or without curly braces at your preference).
I'll rename and use this subj as you suggest on v2.
Quoted 7 lines
This is inconvenient for the user because it worked whatever number they've given but now they have to do the math. So it suggests that what you're replacing this with may not support all the existing use cases. If that can't be fixed to allow checking and changing ram size (maybe via a callback in board code similar to above adjust function returning adjusted size) it may be OK to drop this convenience for the sake of cleaning up code elsewhere.
There were few boards that did fix up and in all cases it was to cover up invalid CLI input.
Creating callback for fixing user mistake doesn't seems to me justified, I'd much prefer to have a hard error and consistent behavior across all the boards versus being lax on error checking.
[...]
Quoted 4 lines
Quoted 4 lines
include/hw/ppc/ppc4xx.h +0
-0@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } }
Quoted 14 lines
Quoted 4 lines
include/hw/ppc/ppc4xx.h +0
-3- ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB);include/hw/ppc/ppc4xx.h ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, · line 711
Quoted 10 lines
include/hw/ppc/ppc4xx.h +10
-0+char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s); + s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s);
Do you have any suggestions how to make error message better?
(maybe do calculation here and dump all valid -m variants instead of "#bank,size/bank")
Quoted 32 lines
Quoted 31 lines
include/hw/ppc/ppc4xx.h +2
-2+g_free (s); +exit (EXIT_FAILURE ); }memory_region_allocate_system_memory (ram,NULL ,"ppc4xx.sdram" , ram_size);@@ -725,8 +733,6 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } } - -return ram_size; }/*****************************************************************************/ hw/ppc/sam460ex.c +2
-3@@ -324,9 +324,8 @@ static void sam460ex_init(MachineState *machine)/* SDRAM controller */ /* put all RAM on first bank because board has one slot * and firmware only checks that */ - machine->ram_size =ppc4xx_sdram_adjust (machine->ram_size,1 , - ram_memories, ram_bases, ram_sizes, - ppc460ex_sdram_bank_sizes); +ppc4xx_sdram_adjust (machine->ram_size,1 , ram_memories, ram_bases, + ram_sizes, ppc460ex_sdram_bank_sizes);/* FIXME: does 460EX have ECC interrupts? */ ppc440_sdram_init(env, SDRAM_NR_BANKS, ram_memories,
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
Quoted 77 lines · Igor Mammedov
Quoted 38 lines · On Wed, 1 Jan 2020 12:54:37 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.Quoted 5 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
(or without curly braces at your preference).
I'll rename and use this subj as you suggest on v2.
Quoted 7 lines
This is inconvenient for the user because it worked whatever number they've given but now they have to do the math. So it suggests that what you're replacing this with may not support all the existing use cases. If that can't be fixed to allow checking and changing ram size (maybe via a callback in board code similar to above adjust function returning adjusted size) it may be OK to drop this convenience for the sake of cleaning up code elsewhere.
There were few boards that did fix up and in all cases it was to cover up invalid CLI input.
Creating callback for fixing user mistake doesn't seems to me justified, I'd much prefer to have a hard error and consistent behavior across all the boards versus being lax on error checking.[...]
Quoted 13 lines
Quoted 13 lines
include/hw/ppc/ppc4xx.h +5
-3@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } - ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB); +char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s);
Quoted 8 lines
Quoted 5 lines
include/hw/ppc/ppc4xx.h ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, · line 711
Quoted 5 lines
include/hw/ppc/ppc4xx.h +5
-0+ s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s);Do you have any suggestions how to make error message better?
(maybe do calculation here and dump all valid -m variants instead of "#bank,size/bank")
Listing the valid values would certainly help users who don't know what the constraints of the SoC or SPD ROMs are (which I think most users don't have a clue about and we should not expect them to know). I've also seen similar concerns in another response for hppa machines so maybe having a callback to allow adjusting user input to board constraints is not a bad idea. It's not lax error checking but convenience for the average user where board has specific constraints and cannot handle any mem size.
Regards,
BALATON Zoltan
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
Quoted 87 lines · On Thu, 2 Jan 2020 16:52:50 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 77 lines · Igor Mammedov
Quoted 38 lines · On Wed, 1 Jan 2020 12:54:37 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.Quoted 5 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
(or without curly braces at your preference).
I'll rename and use this subj as you suggest on v2.
Quoted 7 lines
This is inconvenient for the user because it worked whatever number they've given but now they have to do the math. So it suggests that what you're replacing this with may not support all the existing use cases. If that can't be fixed to allow checking and changing ram size (maybe via a callback in board code similar to above adjust function returning adjusted size) it may be OK to drop this convenience for the sake of cleaning up code elsewhere.
There were few boards that did fix up and in all cases it was to cover up invalid CLI input.
Creating callback for fixing user mistake doesn't seems to me justified, I'd much prefer to have a hard error and consistent behavior across all the boards versus being lax on error checking.[...]
Quoted 13 lines
Quoted 13 lines
include/hw/ppc/ppc4xx.h +5
-3@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } - ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB); +char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s);Quoted 8 lines
Quoted 5 lines
include/hw/ppc/ppc4xx.h ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, · line 711
Quoted 5 lines
include/hw/ppc/ppc4xx.h +5
-0+ s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s);Do you have any suggestions how to make error message better?
(maybe do calculation here and dump all valid -m variants instead of "#bank,size/bank")
Quoted 3 lines
Listing the valid values would certainly help users who don't know what the constraints of the SoC or SPD ROMs are (which I think most users don't have a clue about and we should not expect them to know). I've also seen
ok, I'll go ahead with it.
Quoted 4 lines
similar concerns in another response for hppa machines so maybe having a callback to allow adjusting user input to board constraints is not a bad idea. It's not lax error checking but convenience for the average user where board has specific constraints and cannot handle any mem size.
It could be usefull to generalize and probably introspect valid/supported RAM sizes but I doubt it would be easy to sell a callback for fixing up invalid user input vs just a hard error.
Anyways it looks out of scope of this series and could be done on top if there is demand for that.
Quoted 3 lines
Regards,
BALATON Zoltan
Re: [PATCH 66/86] ppc:ppc440_bamboo/sam460ex: drop RAM size fixup
In reply to BALATON ZoltanQuoted 87 lines · On Thu, 2 Jan 2020 16:52:50 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 77 lines · Igor Mammedov
Quoted 38 lines · On Wed, 1 Jan 2020 12:54:37 +0100 (CET) BALATON Zoltan <[email protected]>…
Quoted 23 lines · Igor Mammedov
If user provided non-sense RAM size, board will complain and continue running with max RAM size supported.
Also RAM is going to be allocated by generic code, so it won't be possible for board to fix things up for user.Make it error message and exit to force user fix CLI, instead of accepting non-sense CLI values.
Signed-off-by Igor Mammedov <[email protected]>---
include/hw/ppc/ppc4xx.h | 9 ++++----- hw/ppc/ppc440_bamboo.c | 11 ++++------- hw/ppc/ppc4xx_devs.c | 26 ++++++++++++++++---------- hw/ppc/sam460ex.c | 5 ++--- 4 files changed, 26 insertions(+), 25 deletions(-)include/hw/ppc/ppc4xx.h +0
-0@@ -42,11 +42,10 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr);include/hw/ppc/ppc4xx.h enum { · line 48
Quoted 10 lines
include/hw/ppc/ppc4xx.h +4
-5-ram_addr_t ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, -MemoryRegion ram_memories[], -hwaddr ram_bases[], -hwaddr ram_sizes[], -const ram_addr_t sdram_bank_sizes[]); +void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +MemoryRegion ram_memories[], +hwaddr ram_bases[],hwaddr ram_sizes[], +const ram_addr_t sdram_bank_sizes[]);With this change this function does not adjust ram size any more so it may need to be renamed, e.g.
ppc4xx_sdram_banksor something else.Quoted 5 lines
A better patch title may be
ppc/{ppc440_bamboo,sam460x}: drop RAM size fixup
(or without curly braces at your preference).
I'll rename and use this subj as you suggest on v2.
Quoted 7 lines
This is inconvenient for the user because it worked whatever number they've given but now they have to do the math. So it suggests that what you're replacing this with may not support all the existing use cases. If that can't be fixed to allow checking and changing ram size (maybe via a callback in board code similar to above adjust function returning adjusted size) it may be OK to drop this convenience for the sake of cleaning up code elsewhere.
There were few boards that did fix up and in all cases it was to cover up invalid CLI input.
Creating callback for fixing user mistake doesn't seems to me justified, I'd much prefer to have a hard error and consistent behavior across all the boards versus being lax on error checking.[...]
Quoted 13 lines
Quoted 13 lines
include/hw/ppc/ppc4xx.h +5
-3@@ -699,10 +698,19 @@ ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, } } - ram_size -= size_left;if (size_left) { -error_report ("Truncating memory to %" PRId64" MiB to fit SDRAM" -" controller limits" , ram_size / MiB); +char *s =g_strdup ("" ); +for (i =0 ; sdram_bank_sizes[i]; i++) { +char *t =g_strdup_printf ("%s%" PRIi64"%s" , s, sdram_bank_sizes[i], + sdram_bank_sizes[i +1 ] ?" ," :"" ); +g_free (s);Quoted 8 lines
Quoted 5 lines
include/hw/ppc/ppc4xx.h ram_addr_t ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks, · line 711
Quoted 5 lines
include/hw/ppc/ppc4xx.h +5
-0+ s = t; + } +error_report ("Invalid RAM size, unable to fit all RAM into RAM banks" +" (unassigned RAM: %" PRIi64")" , size_left); +error_report ("Supported: %d banks and sizes/bank: %s" , nr_banks, s);Do you have any suggestions how to make error message better?
(maybe do calculation here and dump all valid -m variants instead of "#bank,size/bank")
Quoted 3 lines
Listing the valid values would certainly help users who don't know what the constraints of the SoC or SPD ROMs are (which I think most users don't have a clue about and we should not expect them to know).
I gave it a shot, in case of bamboo board it ends up with huge ~80 entries list,
Perhaps it might be better to avoid combinatorial explosion and keep managable
error_report("Supported: %d banks and sizes/bank: %s", nr_banks, s);
error_report("Invalid RAM size, unable to fit all RAM into RAM banks"
" (unassigned RAM: %" PRIi64 ")", size_left);maybe also print relative to user provided value, nearest valid "above" and "below" sizes, instead of remainder.
[...]
Quoted 4 lines
Regards,
BALATON Zoltan
PATCH 67/86 ppc:ppc440_bamboo/sam460ex: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- include/hw/ppc/ppc4xx.h | 2 +- hw/ppc/ppc440_bamboo.c | 3 ++- hw/ppc/ppc4xx_devs.c | 6 ++---- hw/ppc/sam460ex.c | 3 ++- 4 files changed, 7 insertions(+), 7 deletions(-)
include/hw/ppc/ppc4xx.h +1 -1
@@ -42,7 +42,7 @@ enum {qemu_irq *ppcuic_init (CPUPPCState *env,qemu_irq *irqs,uint32_t dcr_base,int has_ssr,int has_vr); -void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +void ppc4xx_sdram_adjust (MemoryRegion *ram,int nr_banks,MemoryRegion ram_memories[],hwaddr ram_bases[],hwaddr ram_sizes[],const ram_addr_t sdram_bank_sizes[]);
hw/ppc/ppc440_bamboo.c +2 -1
@@ -206,7 +206,7 @@ static void bamboo_init(MachineState *machine)/* SDRAM controller */ memset (ram_bases,0 ,sizeof (ram_bases));memset (ram_sizes,0 ,sizeof (ram_sizes)); -ppc4xx_sdram_adjust (ram_size,PPC440EP_SDRAM_NR_BANKS , ram_memories, +ppc4xx_sdram_adjust (machine->ram,PPC440EP_SDRAM_NR_BANKS , ram_memories, ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes);/* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */ ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories,
@@ -293,6 +293,7 @@ static void bamboo_machine_init(MachineClass *mc) mc->desc ="bamboo" ; mc->init = bamboo_init; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("440epb" ); + mc->default_ram_id ="ppc4xx.sdram" ; }DEFINE_MACHINE ("bamboo" , bamboo_machine_init)
hw/ppc/ppc4xx_devs.c +2 -4
@@ -673,12 +673,12 @@ void ppc4xx_sdram_init (CPUPPCState *env, qemu_irq irq, int nbanks,* The 4xx SDRAM controller supports a small number of banks, and each bank * must be one of a small set of sizes. The number of banks and the supported * sizes varies by SoC. */ -void ppc4xx_sdram_adjust (ram_addr_t ram_size,int nr_banks, +void ppc4xx_sdram_adjust (MemoryRegion *ram,int nr_banks,MemoryRegion ram_memories[],hwaddr ram_bases[],hwaddr ram_sizes[],const ram_addr_t sdram_bank_sizes[]) { -MemoryRegion *ram =g_malloc0 (sizeof (*ram)); +ram_addr_t ram_size =memory_region_size (ram);ram_addr_t size_left = ram_size;ram_addr_t base =0 ;ram_addr_t bank_size;
@@ -713,8 +713,6 @@ void ppc4xx_sdram_adjust(ram_addr_t ram_size, int nr_banks,exit (EXIT_FAILURE ); } -memory_region_allocate_system_memory (ram,NULL ,"ppc4xx.sdram" , ram_size); - size_left = ram_size;for (i =0 ; i < nr_banks && size_left; i++) {for (j =0 ; sdram_bank_sizes[j] !=0 ; j++) {
hw/ppc/sam460ex.c +2 -1
@@ -324,7 +324,7 @@ static void sam460ex_init(MachineState *machine)/* SDRAM controller */ /* put all RAM on first bank because board has one slot * and firmware only checks that */ -ppc4xx_sdram_adjust (machine->ram_size,1 , ram_memories, ram_bases, +ppc4xx_sdram_adjust (machine->ram,1 , ram_memories, ram_bases, ram_sizes, ppc460ex_sdram_bank_sizes);/* FIXME: does 460EX have ECC interrupts? */
@@ -483,6 +483,7 @@ static void sam460ex_machine_init(MachineClass *mc) mc->init = sam460ex_init; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("460exb" ); mc->default_ram_size =512 * MiB; + mc->default_ram_id ="ppc4xx.sdram" ; }DEFINE_MACHINE ("sam460ex" , sam460ex_machine_init)
Signature · 1 line
2.7.4
PATCH 68/86 ppc:prep: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/prep.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
hw/ppc/prep.c +7 -8
@@ -400,7 +400,6 @@ static int PPC_NVRAM_set_params (Nvram *nvram, uint16_t NVRAM_size,/* PowerPC PREP hardware initialisation */ static void ppc_prep_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;const char *initrd_filename = machine->initrd_filename;
@@ -413,7 +412,6 @@ static void ppc_prep_init(MachineState *machine)MemoryRegion *xcsr =g_new (MemoryRegion,1 );#endif int linux_boot, i, nb_nics1; -MemoryRegion *ram =g_new (MemoryRegion,1 );uint32_t kernel_base, initrd_base;long kernel_size, initrd_size;DeviceState *dev;
@@ -444,15 +442,14 @@ static void ppc_prep_init(MachineState *machine)qemu_register_reset (ppc_prep_reset, cpu); } -/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"ppc_prep.ram" , ram_size); -memory_region_add_subregion (sysmem,0 , ram); +/* map RAM */ +memory_region_add_subregion (sysmem,0 , machine->ram);if (linux_boot) { kernel_base =KERNEL_LOAD_ADDR ;/* now we can load the kernel */ kernel_size =load_image_targphys (kernel_filename, kernel_base, - ram_size - kernel_base); + machine->ram_size - kernel_base);if (kernel_size <0 ) {error_report ("could not load kernel '%s'" , kernel_filename);exit (1 );
@@ -461,7 +458,7 @@ static void ppc_prep_init(MachineState *machine)if (initrd_filename) { initrd_base =INITRD_LOAD_ADDR ; initrd_size =load_image_targphys (initrd_filename, initrd_base, - ram_size - initrd_base); + machine->ram_size - initrd_base);if (initrd_size <0 ) {error_report ("could not load initial ram disk '%s'" , initrd_filename);
@@ -576,7 +573,7 @@ static void ppc_prep_init(MachineState *machine) sysctrl->nvram = m48t59;/* Initialise NVRAM */ - PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", ram_size, + PPC_NVRAM_set_params(m48t59, NVRAM_SIZE, "PREP", machine->ram_size, ppc_boot_device, kernel_base, kernel_size, kernel_cmdline,
@@ -596,6 +593,7 @@ static void prep_machine_init(MachineClass *mc) mc->default_boot_order ="cad" ; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("602" ); mc->default_display ="std" ; + mc->default_ram_id ="ppc_prep.ram" ; }static int prep_set_cmos_checksum (DeviceState *dev,void *opaque)
@@ -814,6 +812,7 @@ static void ibm_40p_machine_init(MachineClass *mc) mc->init = ibm_40p_init; mc->max_cpus =1 ; mc->default_ram_size =128 * MiB; + mc->default_ram_id ="ppc_prep.ram" ; mc->block_default_type =IF_SCSI ; mc->default_boot_order ="c" ; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("604" );
Signature · 1 line
2.7.4
PATCH 69/86 ppc:spapr: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/spapr.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-)
hw/ppc/spapr.c +3 -5
@@ -2589,7 +2589,6 @@ static void spapr_machine_init(MachineState *machine)PCIHostState *phb;int i;MemoryRegion *sysmem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );hwaddr node0_size =spapr_node0_size (machine);long load_limit, fw_size;char *filename;
@@ -2768,10 +2767,8 @@ static void spapr_machine_init(MachineState *machine)kvmppc_enable_h_page_init (); } -/* allocate RAM */ -memory_region_allocate_system_memory (ram,NULL ,"ppc_spapr.ram" , - machine->ram_size); -memory_region_add_subregion (sysmem,0 , ram); +/* map RAM */ +memory_region_add_subregion (sysmem,0 , machine->ram);/* always allocate the device memory information */ machine->device_memory =g_malloc0 (sizeof (*machine->device_memory));
@@ -4346,6 +4343,7 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data) mc->no_parallel =1 ; mc->default_boot_order ="" ; mc->default_ram_size =512 * MiB; + mc->default_ram_id ="ppc_spapr.ram" ; mc->default_display ="std" ; mc->kvm_type = spapr_kvm_type;machine_class_allow_dynamic_sysbus_dev (mc,TYPE_SPAPR_PCI_HOST_BRIDGE );
Signature · 1 line
2.7.4
PATCH 70/86 ppc:virtex_ml507: remove unused arguments
In reply to Igor Mammedov--- hw/ppc/virtex_ml507.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
hw/ppc/virtex_ml507.c +2 -5
@@ -89,10 +89,7 @@ static void mmubooke_create_initial_mapping(CPUPPCState *env, tlb->PID =0 ; } -static PowerPCCPU *ppc440_init_xilinx (ram_addr_t *ram_size, -int do_init, -const char *cpu_type, -uint32_t sysclk) +static PowerPCCPU *ppc440_init_xilinx (const char *cpu_type,uint32_t sysclk) {PowerPCCPU *cpu;CPUPPCState *env;
@@ -213,7 +210,7 @@ static void virtex_init(MachineState *machine)int i;/* init CPUs */ - cpu =ppc440_init_xilinx (&ram_size,1 , machine->cpu_type,400000000 ); + cpu =ppc440_init_xilinx (machine->cpu_type,400000000 ); env = &cpu->env;if (env->mmu_model !=POWERPC_MMU_BOOKE ) {
Signature · 1 line
2.7.4
PATCH 71/86 ppc:virtex_ml507: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/ppc/virtex_ml507.c | 12 +++++------- 1 file changed, 5 insertions(+), 7 deletions(-)
hw/ppc/virtex_ml507.c +5 -7
@@ -193,7 +193,6 @@ static int xilinx_load_device_tree(hwaddr addr,static void virtex_init (MachineState *machine) { -ram_addr_t ram_size = machine->ram_size;const char *kernel_filename = machine->kernel_filename;const char *kernel_cmdline = machine->kernel_cmdline;hwaddr initrd_base =0 ;
@@ -204,7 +203,6 @@ static void virtex_init(MachineState *machine)CPUPPCState *env;hwaddr ram_base =0 ;DriveInfo *dinfo; -MemoryRegion *phys_ram =g_new (MemoryRegion,1 );qemu_irq irq[32 ], *cpu_irq;int kernel_size;int i;
@@ -221,8 +219,7 @@ static void virtex_init(MachineState *machine)qemu_register_reset (main_cpu_reset, cpu); -memory_region_allocate_system_memory (phys_ram,NULL ,"ram" , ram_size); -memory_region_add_subregion (address_space_mem, ram_base, phys_ram); +memory_region_add_subregion (address_space_mem, ram_base, machine->ram); dinfo =drive_get (IF_PFLASH ,0 ,0 ); pflash_cfi01_register(PFLASH_BASEADDR, "virtex.flash", FLASH_SIZE,
@@ -265,7 +262,7 @@ static void virtex_init(MachineState *machine)/* If we failed loading ELF's try a raw image. */ kernel_size =load_image_targphys (kernel_filename, boot_offset, - ram_size); + machine->ram_size); boot_info.bootstrap_pc = boot_offset; high = boot_info.bootstrap_pc + kernel_size +8192 ; }
@@ -276,7 +273,7 @@ static void virtex_init(MachineState *machine)if (machine->initrd_filename) { initrd_base = high =ROUND_UP (high,4 ); initrd_size =load_image_targphys (machine->initrd_filename, - high, ram_size - high); + high, machine->ram_size - high);if (initrd_size <0 ) { error_report("couldn't load ram disk '%s'",
@@ -290,7 +287,7 @@ static void virtex_init(MachineState *machine) boot_info.fdt = high + (8192 *2 ); boot_info.fdt &= ~8191 ; -xilinx_load_device_tree (boot_info.fdt, ram_size, +xilinx_load_device_tree (boot_info.fdt, machine->ram_size, initrd_base, initrd_size, kernel_cmdline); }
@@ -302,6 +299,7 @@ static void virtex_machine_init(MachineClass *mc) mc->desc ="Xilinx Virtex ML507 reference design" ; mc->init = virtex_init; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("440-xilinx" ); + mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("virtex-ml507" , virtex_machine_init)
Signature · 1 line
2.7.4
PATCH 72/86 sparc:leon3: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/sparc/leon3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
hw/sparc/leon3.c +3 -3
@@ -184,7 +184,6 @@ static void leon3_generic_hw_init(MachineState *machine)SPARCCPU *cpu;CPUSPARCState *env;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *prom =g_new (MemoryRegion,1 );int ret;char *filename;
@@ -244,8 +243,8 @@ static void leon3_generic_hw_init(MachineState *machine)exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"leon3.ram" , ram_size); -memory_region_add_subregion (address_space_mem,LEON3_RAM_OFFSET , ram); +memory_region_add_subregion (address_space_mem,LEON3_RAM_OFFSET , + machine->ram);/* Allocate BIOS */ prom_size =8 * MiB;
@@ -351,6 +350,7 @@ static void leon3_generic_machine_init(MachineClass *mc) mc->desc ="Leon-3 generic" ; mc->init = leon3_generic_hw_init; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("LEON3" ); + mc->default_ram_id ="leon3.ram" ; }DEFINE_MACHINE ("leon3_generic" , leon3_generic_machine_init)
Signature · 1 line
2.7.4
Re: [PATCH 72/86] sparc:leon3: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 36 lines
--- hw/sparc/leon3.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)hw/sparc/leon3.c +3
-3@@ -184,7 +184,6 @@ static void leon3_generic_hw_init(MachineState *machine)SPARCCPU *cpu;CPUSPARCState *env;MemoryRegion *address_space_mem =get_system_memory (); -MemoryRegion *ram =g_new (MemoryRegion,1 );MemoryRegion *prom =g_new (MemoryRegion,1 );int ret;char *filename;@@ -244,8 +243,8 @@ static void leon3_generic_hw_init(MachineState *machine)exit (1 ); } -memory_region_allocate_system_memory (ram,NULL ,"leon3.ram" , ram_size); -memory_region_add_subregion (address_space_mem,LEON3_RAM_OFFSET , ram); +memory_region_add_subregion (address_space_mem,LEON3_RAM_OFFSET , + machine->ram);/* Allocate BIOS */ prom_size =8 * MiB;@@ -351,6 +350,7 @@ static void leon3_generic_machine_init(MachineClass *mc) mc->desc ="Leon-3 generic" ; mc->init = leon3_generic_hw_init; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("LEON3" ); + mc->default_ram_id ="leon3.ram" ; }DEFINE_MACHINE ("leon3_generic" , leon3_generic_machine_init)
PATCH 73/86 sparc:sun4m: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
Patch moves ram size check into sun4m_hw_init() and drops ram_init() moving remainder to sun4m_hw_init() as well, as it was the only place that called it.
Also it rewrites impl. of RamDevice a little bit, which could serve as an example of frontend device for RAM backend. (Caveats are:
1. it doesn't check for memdev backend being mapped since it's been usurped by generic machine to handle majority of machines which don't have RAM frontend device
2. it still lacks 'addr' property and still has hardcoded sysbus_mmio_map() in board init. If done right, board should set 'addr' property and bus/machine plug handler should map it during device realize time.
)
Further improvements were left as exercise for the future, since frontends are out scope of RAM conversion to memdev.
--- hw/sparc/sun4m.c | 73 ++++++++++++++++++++++++++++---------------------------- 1 file changed, 36 insertions(+), 37 deletions(-)
hw/sparc/sun4m.c +36 -37
@@ -777,63 +777,42 @@ static const TypeInfo prom_info = {typedef struct RamDevice {SysBusDevice parent_obj; - -MemoryRegion ram; -uint64_t size; +HostMemoryBackend *memdev; }RamDevice ;/* System RAM */ static void ram_realize (DeviceState *dev,Error **errp) {RamDevice *d =SUN4M_RAM (dev); -SysBusDevice *sbd =SYS_BUS_DEVICE (dev); +MemoryRegion *ram =host_memory_backend_get_memory (d->memdev); -memory_region_allocate_system_memory (&d->ram,OBJECT (d),"sun4m.ram" , - d->size); -sysbus_init_mmio (sbd, &d->ram); +sysbus_init_mmio (SYS_BUS_DEVICE (dev), ram); } -static void ram_init (hwaddr addr,ram_addr_t RAM_size, -uint64_t max_mem) +static void ram_initfn (Object *obj) { -DeviceState *dev; -SysBusDevice *s; -RamDevice *d; - -/* allocate RAM */ -if ((uint64_t )RAM_size > max_mem) { -error_report ("Too much memory for this machine: %" PRId64"," -" maximum %" PRId64, - RAM_size / MiB, max_mem / MiB); -exit (1 ); - } - dev =qdev_create (NULL ,"memory" ); - s =SYS_BUS_DEVICE (dev); - - d =SUN4M_RAM (dev); - d->size = RAM_size; -qdev_init_nofail (dev); - -sysbus_mmio_map (s,0 , addr); +RamDevice *d =SUN4M_RAM (obj); +object_property_add_link (obj,"memdev" ,TYPE_MEMORY_BACKEND , + (Object **)&d->memdev, + object_property_allow_set_link, +OBJ_PROP_LINK_STRONG , &error_abort); +object_property_set_description (obj,"memdev" ,"Set RAM backend" +"Valid value is ID of a hostmem backend" , + &error_abort); } -static Property ram_properties[] = { -DEFINE_PROP_UINT64 ("size" , RamDevice, size,0 ), -DEFINE_PROP_END_OF_LIST (), -}; -static void ram_class_init (ObjectClass *klass,void *data) {DeviceClass *dc =DEVICE_CLASS (klass); dc->realize = ram_realize; - dc->props = ram_properties; }static const TypeInfo ram_info = { .name =TYPE_SUN4M_MEMORY , .parent =TYPE_SYS_BUS_DEVICE , .instance_size =sizeof (RamDevice), + .instance_init = ram_initfn, .class_init = ram_class_init, };
@@ -880,6 +859,13 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,unsigned int smp_cpus = machine->smp.cpus;unsigned int max_cpus = machine->smp.max_cpus; +if (machine->ram_size > hwdef->max_mem) { +error_report ("Too much memory for this machine: %" PRId64"," +" maximum %" PRId64, + machine->ram_size / MiB, hwdef->max_mem / MiB); +exit (1 ); + } +/* init CPUs */ for (i =0 ; i < smp_cpus; i++) {cpu_devinit (machine->cpu_type, i, hwdef->slavio_base, &cpu_irqs[i]);
@@ -888,9 +874,13 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,for (i = smp_cpus; i <MAX_CPUS ; i++) cpu_irqs[i] =qemu_allocate_irqs (dummy_cpu_set_irq,NULL ,MAX_PILS ); +/* Create and map RAM frontend */ + dev =qdev_create (NULL ,"memory" ); +object_property_set_link (OBJECT (dev),OBJECT (machine->ram_memdev), +"memdev" , &error_fatal); +qdev_init_nofail (dev); +sysbus_mmio_map (SYS_BUS_DEVICE (dev),0 ,0 ); -/* set up devices */ -ram_init (0 , machine->ram_size, hwdef->max_mem);/* models without ECC don't trap when missing ram is accessed */ if (!hwdef->ecc_base) {empty_slot_init (machine->ram_size, hwdef->max_mem - machine->ram_size);
@@ -1078,7 +1068,7 @@ static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,fw_cfg_add_i16 (fw_cfg,FW_CFG_NB_CPUS , (uint16_t )smp_cpus);fw_cfg_add_i16 (fw_cfg,FW_CFG_MAX_CPUS , (uint16_t )max_cpus); -fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )ram_size); +fw_cfg_add_i64 (fw_cfg,FW_CFG_RAM_SIZE , (uint64_t )machine->ram_size);fw_cfg_add_i16 (fw_cfg,FW_CFG_MACHINE_ID , hwdef->machine_id);fw_cfg_add_i16 (fw_cfg,FW_CFG_SUN4M_DEPTH , graphic_depth);fw_cfg_add_i16 (fw_cfg,FW_CFG_SUN4M_WIDTH , graphic_width);
@@ -1415,6 +1405,7 @@ static void ss5_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("Fujitsu-MB86904" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss5_type = {
@@ -1434,6 +1425,7 @@ static void ss10_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-SuperSparc-II" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss10_type = {
@@ -1453,6 +1445,7 @@ static void ss600mp_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-SuperSparc-II" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss600mp_type = {
@@ -1472,6 +1465,7 @@ static void ss20_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-SuperSparc-II" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss20_type = {
@@ -1490,6 +1484,7 @@ static void voyager_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("Fujitsu-MB86904" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo voyager_type = {
@@ -1508,6 +1503,7 @@ static void ss_lx_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-MicroSparc-I" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss_lx_type = {
@@ -1526,6 +1522,7 @@ static void ss4_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("Fujitsu-MB86904" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo ss4_type = {
@@ -1544,6 +1541,7 @@ static void scls_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-MicroSparc-I" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo scls_type = {
@@ -1562,6 +1560,7 @@ static void sbook_class_init(ObjectClass *oc, void *data) mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("TI-MicroSparc-I" ); mc->default_display ="tcx" ; + mc->default_ram_id ="sun4m.ram" ; }static const TypeInfo sbook_type = {
Signature · 1 line
2.7.4
PATCH 74/86 sparc:niagara: use memdev for RAM
In reply to Igor Mammedovmemory_region_allocate_system_memory() API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and using MachineState::ram instead of manually initializing RAM memory region.
--- hw/sparc64/niagara.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
hw/sparc64/niagara.c +2 -5
@@ -40,7 +40,6 @@ typedef struct NiagaraBoardState { MemoryRegion hv_ram; - MemoryRegion partition_ram; MemoryRegion nvram; MemoryRegion md_rom; MemoryRegion hv_rom;
@@ -111,11 +110,8 @@ static void niagara_init(MachineState *machine) NIAGARA_HV_RAM_SIZE, &error_fatal);memory_region_add_subregion (sysmem,NIAGARA_HV_RAM_BASE , &s->hv_ram); -memory_region_allocate_system_memory (&s->partition_ram,NULL , -"sun4v-partition.ram" , - machine->ram_size);memory_region_add_subregion (sysmem,NIAGARA_PARTITION_RAM_BASE , - &s->partition_ram); + machine->ram);memory_region_init_ram (&s->nvram,NULL ,"sun4v.nvram" ,NIAGARA_NVRAM_SIZE , &error_fatal);
@@ -173,6 +169,7 @@ static void niagara_class_init(ObjectClass *oc, void *data) mc->max_cpus =1 ;/* XXX for now */ mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("Sun-UltraSparc-T1" ); + mc->default_ram_id ="sun4v-partition.ram" ; }static const TypeInfo niagara_type = {
Signature · 1 line
2.7.4
Re: [PATCH 74/86] sparc:niagara: use memdev for RAM
Quoted 9 lines · Igor Mammedov
memory_region_allocate_system_memory()API is going away, so replace it with memdev allocated MemoryRegion. The later is initialized by generic code, so board only needs to opt in to memdev scheme by providing
MachineClass::default_ram_id
and usingMachineState::raminstead of manually initializing RAM memory region.Signed-off-by Igor Mammedov <[email protected]>
Quoted 38 lines
--- hw/sparc64/niagara.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)hw/sparc64/niagara.c +2
-5@@ -40,7 +40,6 @@ typedef struct NiagaraBoardState { MemoryRegion hv_ram; - MemoryRegion partition_ram; MemoryRegion nvram; MemoryRegion md_rom; MemoryRegion hv_rom;@@ -111,11 +110,8 @@ static void niagara_init(MachineState *machine) NIAGARA_HV_RAM_SIZE, &error_fatal);memory_region_add_subregion (sysmem,NIAGARA_HV_RAM_BASE , &s->hv_ram); -memory_region_allocate_system_memory (&s->partition_ram,NULL , -"sun4v-partition.ram" , - machine->ram_size);memory_region_add_subregion (sysmem,NIAGARA_PARTITION_RAM_BASE , - &s->partition_ram); + machine->ram);memory_region_init_ram (&s->nvram,NULL ,"sun4v.nvram" ,NIAGARA_NVRAM_SIZE , &error_fatal);@@ -173,6 +169,7 @@ static void niagara_class_init(ObjectClass *oc, void *data) mc->max_cpus =1 ;/* XXX for now */ mc->default_boot_order ="c" ; mc->default_cpu_type =SPARC_CPU_TYPE_NAME ("Sun-UltraSparc-T1" ); + mc->default_ram_id ="sun4v-partition.ram" ; }static const TypeInfo niagara_type = {
PATCH 75/86 remove no longer used memory_region_allocate_system_memory()
In reply to Igor Mammedovall boards were switched to using memdev backend for main RAM, so we can drop no longer used memory_region_allocate_system_memory()
--- include/hw/boards.h | 32 -------------------------------- hw/core/numa.c | 34 ---------------------------------- 2 files changed, 66 deletions(-)
include/hw/boards.h +0 -32
@@ -12,38 +12,6 @@#include "qom/object.h" #include "hw/core/cpu.h" -/** -* memory_region_allocate_system_memory - Allocate a board's main memory -* @mr: the #MemoryRegion to be initialized -* @owner: the object that tracks the region's reference count -* @name: name of the memory region -* @ram_size: size of the region in bytes -* -* This function allocates the main memory for a board model, and -* initializes @mr appropriately. It also arranges for the memory -* to be migrated (by calling vmstate_register_ram_global()). -* -* Memory allocated via this function will be backed with the memory -* backend the user provided using "-mem-path" or "-numa node,memdev=..." -* if appropriate; this is typically used to cause host huge pages to be -* used. This function should therefore be called by a board exactly once, -* for the primary or largest RAM area it implements. -* -* For boards where the major RAM is split into two parts in the memory -* map, you can deal with this by calling memory_region_allocate_system_memory() -* once to get a MemoryRegion with enough RAM for both parts, and then -* creating alias MemoryRegions via memory_region_init_alias() which -* alias into different parts of the RAM MemoryRegion and can be mapped -* into the memory map in the appropriate places. -* -* Smaller pieces of memory (display RAM, static RAMs, etc) don't need -* to be backed via the -mem-path memory backend and can simply -* be created via memory_region_init_ram(). -*/ -void memory_region_allocate_system_memory (MemoryRegion *mr,Object *owner, -const char *name, -uint64_t ram_size); -#define TYPE_MACHINE_SUFFIX "-machine"/* Machine class name that needs to be used for class-name-based machine
hw/core/numa.c +0 -34
@@ -509,40 +509,6 @@ void numa_cpu_pre_plug(const CPUArchId *slot, DeviceState *dev, Error **errp) } } -static void allocate_system_memory_nonnuma (MemoryRegion *mr,Object *owner, -const char *name, -uint64_t ram_size) -{ -if (mem_path) { -#ifdef __linux__ -memory_region_init_ram_from_file (mr, owner, name, ram_size,0 ,0 , - mem_path, &error_fatal); -#else -fprintf (stderr,"-mem-path not supported on this host\n" ); -exit (1 ); -#endif - }else { -memory_region_init_ram_nomigrate (mr, owner, name, ram_size, &error_fatal); - } -vmstate_register_ram_global (mr); -} - -void memory_region_allocate_system_memory (MemoryRegion *mr,Object *owner, -const char *name, -uint64_t ram_size) -{ -MachineState *ms =MACHINE (qdev_get_machine ()); - -if (ms->numa_state ==NULL || - ms->numa_state->num_nodes ==0 ||numa_uses_legacy_mem ()) { -allocate_system_memory_nonnuma (mr, owner, name, ram_size); -return ; - } - -memory_region_init (mr, owner, name, ram_size); -numa_init_memdev_container (ms, mr); -} -static void numa_stat_memory_devices (NumaNodeMem node_mem[]) {MemoryDeviceInfoList *info_list =qmp_memory_device_list ();
Signature · 1 line
2.7.4
PATCH 76/86 post conversion default_ram_id cleanup
In reply to Igor MammedovWith default_ram_id is always defined, simplify
'if' conditions in vl.c and numa.c
while at it set
MachineClass::default_ram_id = "ram"
and clean up several boards that use "ram" id
--- hw/alpha/dp264.c | 1 - hw/arm/aspeed.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/raspi.c | 2 -- hw/core/machine.c | 1 + hw/core/null-machine.c | 1 - hw/core/numa.c | 2 +- hw/hppa/machine.c | 1 - hw/ppc/virtex_ml507.c | 1 - vl.c | 1 - 10 files changed, 2 insertions(+), 10 deletions(-)
hw/alpha/dp264.c +0 -1
@@ -183,7 +183,6 @@ static void clipper_machine_init(MachineClass *mc) mc->max_cpus =4 ; mc->is_default =1 ; mc->default_cpu_type =ALPHA_CPU_TYPE_NAME ("ev67" ); - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("clipper" , clipper_machine_init)
hw/arm/aspeed.c +0 -1
@@ -391,7 +391,6 @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy =1 ; mc->no_cdrom =1 ; mc->no_parallel =1 ; - mc->default_ram_id ="ram" ; }static void aspeed_machine_palmetto_class_init (ObjectClass *oc,void *data)
hw/arm/digic_boards.c +0 -1
@@ -149,7 +149,6 @@ static void canon_a1100_machine_init(MachineClass *mc) mc->init = &canon_a1100_init; mc->ignore_memory_transaction_failures = true; mc->default_ram_size =64 * MiB; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("canon-a1100" , canon_a1100_machine_init)
hw/arm/raspi.c +0 -2
@@ -223,7 +223,6 @@ static void raspi2_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; - mc->default_ram_id ="ram" ; mc->ignore_memory_transaction_failures = true; };DEFINE_MACHINE ("raspi2" , raspi2_machine_init)
@@ -246,7 +245,6 @@ static void raspi3_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; - mc->default_ram_id ="ram" ; } DEFINE_MACHINE("raspi3", raspi3_machine_init)#endif
hw/core/machine.c +1 -0
@@ -711,6 +711,7 @@ static void machine_class_init(ObjectClass *oc, void *data)/* Default 128 MB as guest ram size */ mc->default_ram_size =128 * MiB; + mc->default_ram_id ="ram" ; mc->rom_file_has_mr = true; mc->smp_parse = smp_parse;
hw/core/null-machine.c +0 -1
@@ -49,7 +49,6 @@ static void machine_none_machine_init(MachineClass *mc) mc->init = machine_none_init; mc->max_cpus =1 ; mc->default_ram_size =0 ; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("none" , machine_none_machine_init)
hw/core/numa.c +1 -1
@@ -459,7 +459,7 @@ void numa_complete_configuration(MachineState *ms)exit (1 ); } -if (!numa_uses_legacy_mem () && mc->default_ram_id) { +if (!numa_uses_legacy_mem ()) { ms->ram =g_new (MemoryRegion,1 );memory_region_init (ms->ram,OBJECT (ms), mc->default_ram_id, ram_size);
hw/hppa/machine.c +0 -1
@@ -279,7 +279,6 @@ static void machine_hppa_machine_init(MachineClass *mc) mc->is_default =1 ; mc->default_ram_size =512 * MiB; mc->default_boot_order ="cd" ; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("hppa" , machine_hppa_machine_init)
hw/ppc/virtex_ml507.c +0 -1
@@ -299,7 +299,6 @@ static void virtex_machine_init(MachineClass *mc) mc->desc ="Xilinx Virtex ML507 reference design" ; mc->init = virtex_init; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("440-xilinx" ); - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("virtex-ml507" , virtex_machine_init)
vl.c +0 -1
@@ -4296,7 +4296,6 @@ int main(int argc, char **argv, char **envp)if (numa_uses_legacy_mem () && machine_class->default_ram_size && - machine_class->default_ram_id && !current_machine->ram_memdev) {create_default_memdev (current_machine, mem_path, mem_prealloc); }
Signature · 1 line
2.7.4
Re: [PATCH 76/86] post conversion default_ram_id cleanup
Quoted 8 lines · Igor Mammedov
With
default_ram_idis always defined, simplify
'if' conditions invl.candnuma.cwhile at it set
MachineClass::default_ram_id= "ram"
and clean up several boards that use "ram" idSigned-off-by Igor Mammedov <[email protected]>
Quoted 143 lines
--- hw/alpha/dp264.c | 1 - hw/arm/aspeed.c | 1 - hw/arm/digic_boards.c | 1 - hw/arm/raspi.c | 2 -- hw/core/machine.c | 1 + hw/core/null-machine.c | 1 - hw/core/numa.c | 2 +- hw/hppa/machine.c | 1 - hw/ppc/virtex_ml507.c | 1 - vl.c | 1 - 10 files changed, 2 insertions(+), 10 deletions(-)hw/alpha/dp264.c +0
-1@@ -183,7 +183,6 @@ static void clipper_machine_init(MachineClass *mc) mc->max_cpus =4 ; mc->is_default =1 ; mc->default_cpu_type =ALPHA_CPU_TYPE_NAME ("ev67" ); - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("clipper" , clipper_machine_init)hw/arm/aspeed.c +0
-1@@ -391,7 +391,6 @@ static void aspeed_machine_class_init(ObjectClass *oc, void *data) mc->no_floppy =1 ; mc->no_cdrom =1 ; mc->no_parallel =1 ; - mc->default_ram_id ="ram" ; }static void aspeed_machine_palmetto_class_init (ObjectClass *oc,void *data)hw/arm/digic_boards.c +0
-1@@ -149,7 +149,6 @@ static void canon_a1100_machine_init(MachineClass *mc) mc->init = &canon_a1100_init; mc->ignore_memory_transaction_failures = true; mc->default_ram_size =64 * MiB; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("canon-a1100" , canon_a1100_machine_init)hw/arm/raspi.c +0
-2@@ -223,7 +223,6 @@ static void raspi2_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; - mc->default_ram_id ="ram" ; mc->ignore_memory_transaction_failures = true; };DEFINE_MACHINE ("raspi2" , raspi2_machine_init)@@ -246,7 +245,6 @@ static void raspi3_machine_init(MachineClass *mc) mc->min_cpus =BCM283X_NCPUS ; mc->default_cpus =BCM283X_NCPUS ; mc->default_ram_size =1 * GiB; - mc->default_ram_id ="ram" ; } DEFINE_MACHINE("raspi3", raspi3_machine_init)#endif hw/core/machine.c +1
-0@@ -711,6 +711,7 @@ static void machine_class_init(ObjectClass *oc, void *data)/* Default 128 MB as guest ram size */ mc->default_ram_size =128 * MiB; + mc->default_ram_id ="ram" ; mc->rom_file_has_mr = true; mc->smp_parse = smp_parse;hw/core/null-machine.c +0
-1@@ -49,7 +49,6 @@ static void machine_none_machine_init(MachineClass *mc) mc->init = machine_none_init; mc->max_cpus =1 ; mc->default_ram_size =0 ; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("none" , machine_none_machine_init)hw/core/numa.c +1
-1@@ -459,7 +459,7 @@ void numa_complete_configuration(MachineState *ms)exit (1 ); } -if (!numa_uses_legacy_mem () && mc->default_ram_id) { +if (!numa_uses_legacy_mem ()) { ms->ram =g_new (MemoryRegion,1 );memory_region_init (ms->ram,OBJECT (ms), mc->default_ram_id, ram_size);hw/hppa/machine.c +0
-1@@ -279,7 +279,6 @@ static void machine_hppa_machine_init(MachineClass *mc) mc->is_default =1 ; mc->default_ram_size =512 * MiB; mc->default_boot_order ="cd" ; - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("hppa" , machine_hppa_machine_init)hw/ppc/virtex_ml507.c +0
-1@@ -299,7 +299,6 @@ static void virtex_machine_init(MachineClass *mc) mc->desc ="Xilinx Virtex ML507 reference design" ; mc->init = virtex_init; mc->default_cpu_type =POWERPC_CPU_TYPE_NAME ("440-xilinx" ); - mc->default_ram_id ="ram" ; }DEFINE_MACHINE ("virtex-ml507" , virtex_machine_init)vl.c +0
-1@@ -4296,7 +4296,6 @@ int main(int argc, char **argv, char **envp)if (numa_uses_legacy_mem () && machine_class->default_ram_size && - machine_class->default_ram_id && !current_machine->ram_memdev) {create_default_memdev (current_machine, mem_path, mem_prealloc); }
PATCH 77/86 exec: cleanup qemu_minrampagesize()/qemu_maxrampagesize()
In reply to Igor MammedovSince all RAM is backed by hostmem backends, drop
global -mem-path invariant and simplify code.
--- exec.c | 51 +++++---------------------------------------------- 1 file changed, 5 insertions(+), 46 deletions(-)
exec.c +5 -46
@@ -1667,60 +1667,19 @@ static int find_max_backend_pagesize(Object *obj, void *opaque)*/ long qemu_minrampagesize (void ) { -long hpsize =LONG_MAX ; -long mainrampagesize; -Object *memdev_root; -MachineState *ms =MACHINE (qdev_get_machine ()); - - mainrampagesize =qemu_mempath_getpagesize (mem_path); - -/* it's possible we have memory-backend objects with -* hugepage-backed RAM. these may get mapped into system -* address space via -numa parameters or memory hotplug -* hooks. we want to take these into account, but we -* also want to make sure these supported hugepage -* sizes are applicable across the entire range of memory -* we may boot from, so we take the min across all -* backends, and assume normal pages in cases where a -* backend isn't backed by hugepages. -*/ - memdev_root =object_resolve_path ("/objects" ,NULL ); -if (memdev_root) { -object_child_foreach (memdev_root, find_min_backend_pagesize, &hpsize); - } -if (hpsize ==LONG_MAX ) { -/* No additional memory regions found ==> Report main RAM page size */ -return mainrampagesize; - } - -/* If NUMA is disabled or the NUMA nodes are not backed with a -* memory-backend, then there is at least one node using "normal" RAM, -* so if its page size is smaller we have got to report that size instead. -*/ -if (hpsize > mainrampagesize && - (ms->numa_state ==NULL || - ms->numa_state->num_nodes ==0 || - ms->numa_state->nodes[0 ].node_memdev ==NULL )) { -static bool warned; -if (!warned) { -error_report ("Huge page support disabled (n/a for main memory)." ); - warned = true; - } -return mainrampagesize; - } +long hpsize; +Object *memdev_root =object_resolve_path ("/objects" ,NULL ); +object_child_foreach (memdev_root, find_min_backend_pagesize, &hpsize);return hpsize; }long qemu_maxrampagesize (void ) { -long pagesize =qemu_mempath_getpagesize (mem_path); +long pagesize;Object *memdev_root =object_resolve_path ("/objects" ,NULL ); -if (memdev_root) { -object_child_foreach (memdev_root, find_max_backend_pagesize, - &pagesize); - } +object_child_foreach (memdev_root, find_max_backend_pagesize, &pagesize);return pagesize; }#else
Signature · 1 line
2.7.4
PATCH 78/86 exec: drop bogus mem_path from qemu_ram_alloc_from_fd()
In reply to Igor MammedovFunction will report error that will mention global mem_path, which was valid the only if legacy -mem-path was used and only in case of main RAM.
However it doesn't work with hostmem backends
(for example:
"
qemu: -object memory-backend-file,id=ram0,size=128M,mem-path=foo:
backing store (null) size 0x200000 does not match 'size' option 0x8000000
")
and couldn't possibly work in general FD case the function is supposed to handle.
Taking in account that main RAM was converted into memory-backend-foo object, there is no point in printing file name (from inappropriate place) as failing path is a part of backend's error message.
Hence drop bogus mem_path usage from qemu_ram_alloc_from_fd(), it's a job of its user to add file name to error message if applicable.
--- exec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
exec.c +2 -2
@@ -2308,9 +2308,9 @@ RAMBlock *qemu_ram_alloc_from_fd(ram_addr_t size, MemoryRegion *mr, size =HOST_PAGE_ALIGN (size); file_size =get_file_size (fd);if (file_size >0 && file_size < size) { -error_setg (errp,"backing store %s size 0x%" PRIx64 +error_setg (errp,"backing store size 0x%" PRIx64" does not match 'size' option 0x" RAM_ADDR_FMT , - mem_path, file_size, size); + file_size, size);return NULL ; }
Signature · 1 line
2.7.4
PATCH 79/86 make mem_path local variable
In reply to Igor MammedovIt's no longer used anywhere beside main(), so make it local variable that is used for CLI compat purposes to keep -mem-path option working.
Under hood QEMU will use it to create
memory-backend-file,mem-path=...
backend and use its MemoryRegion as main RAM.
--- include/sysemu/sysemu.h | 1 - vl.c | 2 +- 2 files changed, 1 insertion(+), 2 deletions(-)
include/sysemu/sysemu.h +0 -1
@@ -53,7 +53,6 @@ extern uint8_t *boot_splash_filedata;extern bool enable_mlock;extern bool enable_cpu_pm;extern QEMUClockType rtc_clock; -extern const char *mem_path;extern int mem_prealloc;#define MAX_OPTION_ROMS 16
vl.c +1 -1
@@ -140,7 +140,6 @@ enum vga_retrace_method vga_retrace_method = VGA_RETRACE_DUMB;int display_opengl;const char * keyboard_layout =NULL ;ram_addr_t ram_size; -const char *mem_path =NULL ;int mem_prealloc =0 ;/* force preallocation of physical target memory */ bool enable_mlock = false;bool enable_cpu_pm = false;
@@ -2868,6 +2867,7 @@ int main(int argc, char **argv, char **envp)Error *err =NULL ;bool list_data_dirs = false;char *dir, **dirs; +const char *mem_path =NULL ;BlockdevOptionsQueue bdo_queue =QSIMPLEQ_HEAD_INITIALIZER (bdo_queue);QemuPluginList plugin_list =QTAILQ_HEAD_INITIALIZER (plugin_list);
Signature · 1 line
2.7.4
PATCH 80/86 hostmem: introduce "prealloc-threads" property
In reply to Igor Mammedovthe property will allow user to specify number of threads to use in pre-allocation stage. It also will allow to reduce implicit hostmem dependency on current_machine.
On object creation it will default to 1, but via machine compat property it will be updated to MachineState::smp::cpus to keep current behavior for hostmem and main RAM (which is now also hostmem based).
--- include/sysemu/hostmem.h | 2 ++ backends/hostmem.c | 43 +++++++++++++++++++++++++++++++++++++++---- vl.c | 15 +++++++++++---- 3 files changed, 52 insertions(+), 8 deletions(-)
include/sysemu/hostmem.h +2 -0
@@ -61,6 +61,7 @@ struct HostMemoryBackendClass {* @parent: opaque parent object container * @size: amount of memory backend provides * @mr: MemoryRegion representing host memory belonging to backend +* @prealloc_threads: number of threads to be used for preallocatining RAM */ struct HostMemoryBackend {/* private */
@@ -70,6 +71,7 @@ struct HostMemoryBackend {uint64_t size;bool merge, dump, use_canonical_path;bool prealloc, force_prealloc, is_mapped, share; +uint32_t prealloc_threads;DECLARE_BITMAP (host_nodes,MAX_NODES +1 );HostMemPolicy policy;
backends/hostmem.c +39 -4
87 lines not on this page · raw message
vl.c +11 -4
@@ -2814,8 +2814,7 @@ static void configure_accelerators(const char *progname) } } -static void create_default_memdev (MachineState *ms,const char *path, -bool prealloc) +static void create_default_memdev (MachineState *ms,const char *path) {Object *obj;MachineClass *mc =MACHINE_GET_CLASS (ms);
@@ -2824,7 +2823,6 @@ static void create_default_memdev(MachineState *ms, const char *path,if (path) {object_property_set_str (obj, path,"mem-path" , &error_fatal); } -object_property_set_bool (obj, prealloc,"prealloc" , &error_fatal);object_property_set_int (obj, ms->ram_size,"size" , &error_fatal);object_property_add_child (object_get_objects_root (), mc->default_ram_id, obj, &error_fatal);
@@ -3967,6 +3965,15 @@ int main(int argc, char **argv, char **envp)exit (1 ); } +if (mem_prealloc) { +static GlobalProperty p[] = { + {"memory-backend" ,"prealloc-threads" ,NULL }, + }; + + p[0 ].value =g_strdup_printf ("%d" , current_machine->smp.cpus); +compat_props_add (machine_class->compat_props, p,G_N_ELEMENTS (p)); + } +/* * Get the default machine options from the machine if it is not already * specified either by the configuration file or by the command line.
@@ -4297,7 +4304,7 @@ int main(int argc, char **argv, char **envp)if (numa_uses_legacy_mem () && machine_class->default_ram_size && !current_machine->ram_memdev) { -create_default_memdev (current_machine, mem_path, mem_prealloc); +create_default_memdev (current_machine, mem_path); }/* do monitor/qmp handling at preconfig state if requested */ main_loop ();
Signature · 1 line
2.7.4
PATCH 81/86 hostmem: fix strict bind policy
In reply to Igor MammedovWhen option -mem-prealloc is used with one or more memory-backend objects, created backends may not obey configured bind policy or creation may fail after kernel attempts to move pages according to bind policy.
Reason is in file_ram_alloc(), which will pre-allocate any descriptor based RAM if global mem_prealloc != 0 and that happens way before bind policy is applied to memory range.
One way to fix it would be to extend memory_region_foo() API and add more invariants that could broken later due implicit dependencies that's hard to track.
Another approach is to drop adhoc main RAM allocation and consolidate it around memory-backend. That allows to have single place that allocates guest RAM (main and memdev) in the same way and then global mem_prealloc could be replaced by backend's property[s] that will affect created memory-backend objects but only in correct order this time.
With main RAM now converted to hostmem backends, there is no point in keeping global mem_prealloc around, so alias
-mem-prealloc to "memory-backend.prealloc=on"
machine compat[*] property and make mem_prealloc a local variable to only stir registration of compat property.
*) currently user accessible -global works only with DEVICE
based objects and extra work is needed to make it work with hostmem backends. But that is convenience option and out of scope of this already huge refactoring. Hence machine compat properties were used.
--- include/sysemu/hostmem.h | 2 +- include/sysemu/sysemu.h | 1 - backends/hostmem-file.c | 1 - backends/hostmem-memfd.c | 1 - backends/hostmem.c | 12 +----------- exec.c | 11 ----------- vl.c | 3 ++- 7 files changed, 4 insertions(+), 27 deletions(-)
include/sysemu/hostmem.h +1 -1
@@ -70,7 +70,7 @@ struct HostMemoryBackend {/* protected */ uint64_t size;bool merge, dump, use_canonical_path; -bool prealloc, force_prealloc, is_mapped, share; +bool prealloc, is_mapped, share;uint32_t prealloc_threads;DECLARE_BITMAP (host_nodes,MAX_NODES +1 );HostMemPolicy policy;
include/sysemu/sysemu.h +0 -1
@@ -53,7 +53,6 @@ extern uint8_t *boot_splash_filedata;extern bool enable_mlock;extern bool enable_cpu_pm;extern QEMUClockType rtc_clock; -extern int mem_prealloc;#define MAX_OPTION_ROMS 16 typedef struct QEMUOptionRom {
backends/hostmem-file.c +0 -1
@@ -51,7 +51,6 @@ file_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)return ; } - backend->force_prealloc = mem_prealloc; name =host_memory_backend_get_name (backend); memory_region_init_ram_from_file(&backend->mr, OBJECT(backend), name,
backends/hostmem-memfd.c +0 -1
@@ -45,7 +45,6 @@ memfd_backend_memory_alloc(HostMemoryBackend *backend, Error **errp)return ; } - backend->force_prealloc = mem_prealloc; fd = qemu_memfd_create(TYPE_MEMORY_BACKEND_MEMFD, backend->size, m->hugetlb, m->hugetlbsize, m->seal ? F_SEAL_GROW | F_SEAL_SHRINK | F_SEAL_SEAL : 0,
backends/hostmem.c +1 -11
@@ -215,7 +215,7 @@ static bool host_memory_backend_get_prealloc(Object *obj, Error **errp) {HostMemoryBackend *backend =MEMORY_BACKEND (obj); -return backend->prealloc || backend->force_prealloc; +return backend->prealloc; } static void host_memory_backend_set_prealloc(Object *obj, bool value,
@@ -224,14 +224,6 @@ static void host_memory_backend_set_prealloc(Object *obj, bool value,Error *local_err =NULL ;HostMemoryBackend *backend =MEMORY_BACKEND (obj); -if (backend->force_prealloc) { -if (value) { -error_setg (errp, -"remove -mem-prealloc to use the prealloc property" ); -return ; - } - } -if (!host_memory_backend_mr_inited (backend)) { backend->prealloc = value;return ;
@@ -288,8 +280,6 @@ static void host_memory_backend_init(Object *obj)/* TODO: convert this compat properties */ backend->merge =machine_mem_merge (machine); backend->dump =machine_dump_guest_core (machine); - backend->prealloc = mem_prealloc; - backend->prealloc_threads =1 ; }static void host_memory_backend_post_init (Object *obj)
exec.c +0 -11
@@ -1802,8 +1802,6 @@ static void *file_ram_alloc(RAMBlock *block,bool truncate, Error **errp) { - Error *err = NULL; -MachineState *ms =MACHINE (qdev_get_machine ()); void *area; block->page_size =qemu_fd_getpagesize (fd);
@@ -1859,15 +1857,6 @@ static void *file_ram_alloc(RAMBlock *block,return NULL ; } -if (mem_prealloc) { -os_mem_prealloc (fd, area, memory, ms->smp.cpus, &err); -if (err) { -error_propagate (errp, err); -qemu_ram_munmap (fd, area, memory); -return NULL ; - } - } - block->fd = fd;return area; }
vl.c +2 -1
@@ -140,7 +140,6 @@ enum vga_retrace_method vga_retrace_method = VGA_RETRACE_DUMB;int display_opengl;const char * keyboard_layout =NULL ;ram_addr_t ram_size; -int mem_prealloc =0 ;/* force preallocation of physical target memory */ bool enable_mlock = false;bool enable_cpu_pm = false;int nb_nics;
@@ -2868,6 +2867,7 @@ int main(int argc, char **argv, char **envp)const char *mem_path =NULL ;BlockdevOptionsQueue bdo_queue =QSIMPLEQ_HEAD_INITIALIZER (bdo_queue);QemuPluginList plugin_list =QTAILQ_HEAD_INITIALIZER (plugin_list); +int mem_prealloc =0 ;/* force preallocation of physical target memory */ os_set_line_buffering ();
@@ -3968,6 +3968,7 @@ int main(int argc, char **argv, char **envp)if (mem_prealloc) {static GlobalProperty p[] = { {"memory-backend" ,"prealloc-threads" ,NULL }, + {"memory-backend" ,"prealloc" ,"on" }, }; p[0 ].value =g_strdup_printf ("%d" , current_machine->smp.cpus);
Signature · 1 line
2.7.4
PATCH 82/86 numa: forbid '-numa node, mem' for 5.0 and newer machine types
In reply to Igor MammedovDeprecation period is ran out and it's a time to flip the switch introduced by cd5ff8333a.
Disable legacy option for new machine types and amend documentation.
--- hw/arm/virt.c | 2 +- hw/core/numa.c | 6 ++++++ hw/i386/pc.c | 1 - hw/i386/pc_piix.c | 1 + hw/i386/pc_q35.c | 1 + hw/ppc/spapr.c | 2 +- qemu-deprecated.texi | 16 ---------------- qemu-options.hx | 8 ++++---- 8 files changed, 14 insertions(+), 23 deletions(-)
hw/arm/virt.c +1 -1
@@ -2049,7 +2049,6 @@ static void virt_machine_class_init(ObjectClass *oc, void *data) hc->pre_plug = virt_machine_device_pre_plug_cb; hc->plug = virt_machine_device_plug_cb; hc->unplug_request = virt_machine_device_unplug_request_cb; - mc->numa_mem_supported = true; mc->auto_enable_numa_with_memhp = true; mc->default_ram_id ="mach-virt.ram" ; }
@@ -2153,6 +2152,7 @@ DEFINE_VIRT_MACHINE_AS_LATEST(5, 0)static void virt_machine_4_2_options (MachineClass *mc) {compat_props_add (mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); + mc->numa_mem_supported = true; }DEFINE_VIRT_MACHINE (4 ,2 )
hw/core/numa.c +6 -0
@@ -116,6 +116,12 @@ static void parse_numa_node(MachineState *ms, NumaNodeOptions *node, }if (node->has_mem) { +if (!mc->numa_mem_supported) { +error_setg (errp,"Parameter -numa node,mem is not supported by this" +" machine type. Use -numa node,memdev instead" ); +return ; + } + numa_info[nodenr].node_mem = node->mem;if (!qtest_enabled ()) { warn_report("Parameter -numa node,mem is deprecated,"
hw/i386/pc.c +0 -1
@@ -1948,7 +1948,6 @@ static void pc_machine_class_init(ObjectClass *oc, void *data) hc->unplug = pc_machine_device_unplug_cb; mc->default_cpu_type =TARGET_DEFAULT_CPU_TYPE ; mc->nvdimm_supported = true; - mc->numa_mem_supported = true; mc->default_ram_id ="pc.ram" ; object_class_property_add(oc, PC_MACHINE_DEVMEM_REGION_SIZE, "int",
hw/i386/pc_piix.c +1 -0
@@ -436,6 +436,7 @@ static void pc_i440fx_4_2_machine_options(MachineClass *m)pc_i440fx_5_0_machine_options (m); m->alias =NULL ; m->is_default =0 ; + m->numa_mem_supported = true;compat_props_add (m->compat_props, hw_compat_4_2, hw_compat_4_2_len);compat_props_add (m->compat_props, pc_compat_4_2, pc_compat_4_2_len); }
hw/i386/pc_q35.c +1 -0
@@ -364,6 +364,7 @@ static void pc_q35_4_2_machine_options(MachineClass *m) {pc_q35_5_0_machine_options (m); m->alias =NULL ; + m->numa_mem_supported = true;compat_props_add (m->compat_props, hw_compat_4_2, hw_compat_4_2_len);compat_props_add (m->compat_props, pc_compat_4_2, pc_compat_4_2_len); }
hw/ppc/spapr.c +1 -1
@@ -4385,7 +4385,6 @@ static void spapr_machine_class_init(ObjectClass *oc, void *data)* in which LMBs are represented and hot-added */ mc->numa_mem_align_shift =28 ; - mc->numa_mem_supported = true; mc->auto_enable_numa = true; smc->default_caps.caps[SPAPR_CAP_HTM ] =SPAPR_CAP_OFF ;
@@ -4467,6 +4466,7 @@ static void spapr_machine_4_2_class_options(MachineClass *mc) {spapr_machine_5_0_class_options (mc);compat_props_add (mc->compat_props, hw_compat_4_2, hw_compat_4_2_len); + mc->numa_mem_supported = true; } DEFINE_SPAPR_MACHINE(4_2, "4.2", false);
qemu-deprecated.texi +0 -16
@@ -89,22 +89,6 @@ error in the future. The @code{-realtime mlock=on|off} argument has been replaced by the @code{-overcommit mem-lock=on|off} argument. -@subsection -numa node,mem=@var{size} (since 4.1) - -The parameter @option{mem} of @option{-numa node} is used to assign a part of -guest RAM to a NUMA node. But when using it, it's impossible to manage specified -RAM chunk on the host side (like bind it to a host node, setting bind policy, ...), -so guest end-ups with the fake NUMA configuration with suboptiomal performance. -However since 2014 there is an alternative way to assign RAM to a NUMA node -using parameter @option{memdev}, which does the same as @option{mem} and adds -means to actualy manage node RAM on the host side. Use parameter @option{memdev} -with @var{memory-backend-ram} backend as an replacement for parameter @option{mem} -to achieve the same fake NUMA effect or a properly configured -@var{memory-backend-file} backend to actually benefit from NUMA configuration. -In future new machine versions will not accept the option but it will still -work with old machine types. User can check QAPI schema to see if the legacy -option is supported by looking at MachineInfo::numa-mem-supported property. - @subsection -numa node (without memory specified) (since 4.1) Splitting RAM by default between NUMA nodes has the same issues as @option{mem}
qemu-options.hx +4 -4
@@ -214,10 +214,10 @@ For example: -numa cpu,node-id=0,socket-id=0 -numa cpu,node-id=1,socket-id=1 @end example -@samp{mem} assigns a given RAM amount to a node. @samp{memdev} -assigns RAM from a given memory backend device to a node. If -@samp{mem} and @samp{memdev} are omitted in all nodes, RAM is -split equally between them. +Legacy @samp{mem} assigns a given RAM amount to a node (not supported for 5.0 +and newer machine types). @samp{memdev} assigns RAM from a given memory backend +device to a node. If @samp{mem} and @samp{memdev} are omitted in all nodes, RAM +is split equally between them. @samp{mem} and @samp{memdev} are mutually exclusive. Furthermore, if one node uses @samp{memdev}, all of them have to use it.
Signature · 1 line
2.7.4
PATCH 83/86 tests:numa-test: make top level args dynamic and g_autofree(cli) cleanups
In reply to Igor MammedovUse GString to pass argument to make_cli() so that it would be easy to dynamically change test case arguments from main(). The follow up patch will use it to change RAM size options depending on target.
While at it cleanup 'cli' freeing, using g_autofree annotation.
---
PS:
make as separate patch so it won't clutter follow up testcase changes.
--- tests/numa-test.c | 38 ++++++++++++++------------------------ 1 file changed, 14 insertions(+), 24 deletions(-)
tests/numa-test.c +14 -24
@@ -14,16 +14,16 @@#include "qapi/qmp/qdict.h" #include "qapi/qmp/qlist.h" -static char *make_cli (const char *generic_cli,const char *test_cli) +static char *make_cli (const GString *generic_cli,const char *test_cli) { -return g_strdup_printf ("%s %s" , generic_cli ? generic_cli :"" , test_cli); +return g_strdup_printf ("%s %s" , generic_cli->str, test_cli); }static void test_mon_explicit (const void *data) { -char *s; -char *cli;QTestState *qts; + g_autofree char *s = NULL; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 8 " "-numa node,nodeid=0,cpus=0-3 "
@@ -33,17 +33,15 @@ static void test_mon_explicit(const void *data) s =qtest_hmp (qts,"info numa" );g_assert (strstr (s,"node 0 cpus: 0 1 2 3" ));g_assert (strstr (s,"node 1 cpus: 4 5 6 7" )); -g_free (s);qtest_quit (qts); -g_free (cli); }static void test_mon_default (const void *data) { -char *s; -char *cli;QTestState *qts; + g_autofree char *s = NULL; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 8 -numa node -numa node" ); qts =qtest_init (cli);
@@ -51,17 +49,15 @@ static void test_mon_default(const void *data) s =qtest_hmp (qts,"info numa" );g_assert (strstr (s,"node 0 cpus: 0 2 4 6" ));g_assert (strstr (s,"node 1 cpus: 1 3 5 7" )); -g_free (s);qtest_quit (qts); -g_free (cli); }static void test_mon_partial (const void *data) { -char *s; -char *cli;QTestState *qts; + g_autofree char *s = NULL; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 8 " "-numa node,nodeid=0,cpus=0-1 "
@@ -71,10 +67,8 @@ static void test_mon_partial(const void *data) s =qtest_hmp (qts,"info numa" );g_assert (strstr (s,"node 0 cpus: 0 1 2 3 6 7" ));g_assert (strstr (s,"node 1 cpus: 4 5" )); -g_free (s);qtest_quit (qts); -g_free (cli); }static QList *get_cpus (QTestState *qts,QDict **resp)
@@ -87,11 +81,11 @@ static QList *get_cpus(QTestState *qts, QDict **resp)static void test_query_cpus (const void *data) { -char *cli;QDict *resp;QList *cpus;QObject *e;QTestState *qts; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 8 -numa node,cpus=0-3 -numa node,cpus=4-7" ); qts =qtest_init (cli);
@@ -120,16 +114,15 @@ static void test_query_cpus(const void *data)qobject_unref (resp);qtest_quit (qts); -g_free (cli); }static void pc_numa_cpu (const void *data) { -char *cli;QDict *resp;QList *cpus;QObject *e;QTestState *qts; + g_autofree char *cli = NULL; cli =make_cli (data,"-cpu pentium -smp 8,sockets=2,cores=2,threads=2 " "-numa node,nodeid=0 -numa node,nodeid=1 "
@@ -174,16 +167,15 @@ static void pc_numa_cpu(const void *data)qobject_unref (resp);qtest_quit (qts); -g_free (cli); }static void spapr_numa_cpu (const void *data) { -char *cli;QDict *resp;QList *cpus;QObject *e;QTestState *qts; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 4,cores=4 " "-numa node,nodeid=0 -numa node,nodeid=1 "
@@ -220,16 +212,15 @@ static void spapr_numa_cpu(const void *data)qobject_unref (resp);qtest_quit (qts); -g_free (cli); }static void aarch64_numa_cpu (const void *data) { -char *cli;QDict *resp;QList *cpus;QObject *e;QTestState *qts; + g_autofree char *cli = NULL; cli =make_cli (data,"-smp 2 " "-numa node,nodeid=0 -numa node,nodeid=1 "
@@ -264,7 +255,6 @@ static void aarch64_numa_cpu(const void *data)qobject_unref (resp);qtest_quit (qts); -g_free (cli); }static void pc_dynamic_cpu_cfg (const void *data)
@@ -329,11 +319,11 @@ static void pc_dynamic_cpu_cfg(const void *data)int main (int argc,char **argv) { -const char *args =NULL ; +g_autoptr (GString) args =g_string_new ("" );const char *arch =qtest_get_arch ();if (strcmp (arch,"aarch64" ) ==0 ) { - args ="-machine virt" ; +g_string_append (args," -machine virt" ); }g_test_init (&argc, &argv,NULL );
Signature · 1 line
2.7.4
PATCH 84/86 tests:numa-test: use explicit memdev to specify node RAM
In reply to Igor MammedovFollow up patches will remove automatic RAM distribution between nodes and will make default machine types require "memdev" option instead of legacy "mem" option.
Make tests to follow new rules and add an additional test for legacy "mem" option on old machine type, to make sure it won't regress in the future.
--- tests/numa-test.c | 52 ++++++++++++++++++++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 14 deletions(-)
tests/numa-test.c +38 -14
@@ -25,9 +25,8 @@ static void test_mon_explicit(const void *data) g_autofree char *s = NULL; g_autofree char *cli = NULL; - cli =make_cli (data,"-smp 8 " -"-numa node,nodeid=0,cpus=0-3 " -"-numa node,nodeid=1,cpus=4-7 " ); + cli =make_cli (data,"-smp 8 -numa node,nodeid=0,memdev=ram,cpus=0-3 " +"-numa node,nodeid=1,cpus=4-7" ); qts =qtest_init (cli); s =qtest_hmp (qts,"info numa" );
@@ -37,13 +36,13 @@ static void test_mon_explicit(const void *data)qtest_quit (qts); } -static void test_mon_default (const void *data) +static void test_def_cpu_split (const void *data) {QTestState *qts; g_autofree char *s = NULL; g_autofree char *cli = NULL; - cli =make_cli (data,"-smp 8 -numa node -numa node" ); + cli =make_cli (data,"-smp 8 -numa node,memdev=ram -numa node" ); qts =qtest_init (cli); s =qtest_hmp (qts,"info numa" );
@@ -53,6 +52,23 @@ static void test_mon_default(const void *data)qtest_quit (qts); } +static void test_pc_legacy_mem (const void *data) +{ +QTestState *qts; + g_autofree char *s = NULL; + g_autofree char *cli = NULL; + + cli =make_cli (data,"-M pc-i440fx-4.2 -smp 8 " +"-numa node,mem=64M -numa node,mem=64M" ); + qts =qtest_init (cli); + + s =qtest_hmp (qts,"info numa" ); +g_assert (strstr (s,"node 0 size: 64 MB" )); +g_assert (strstr (s,"node 1 size: 64 MB" )); + +qtest_quit (qts); +} +static void test_mon_partial (const void *data) {QTestState *qts;
@@ -60,7 +76,7 @@ static void test_mon_partial(const void *data) g_autofree char *cli = NULL; cli =make_cli (data,"-smp 8 " -"-numa node,nodeid=0,cpus=0-1 " +"-numa node,nodeid=0,memdev=ram,cpus=0-1 " "-numa node,nodeid=1,cpus=4-5 " ); qts =qtest_init (cli);
@@ -87,7 +103,8 @@ static void test_query_cpus(const void *data)QTestState *qts; g_autofree char *cli = NULL; - cli =make_cli (data,"-smp 8 -numa node,cpus=0-3 -numa node,cpus=4-7" ); + cli =make_cli (data,"-smp 8 -numa node,memdev=ram,cpus=0-3 " +"-numa node,cpus=4-7" ); qts =qtest_init (cli); cpus =get_cpus (qts, &resp);g_assert (cpus);
@@ -125,7 +142,7 @@ static void pc_numa_cpu(const void *data) g_autofree char *cli = NULL; cli =make_cli (data,"-cpu pentium -smp 8,sockets=2,cores=2,threads=2 " -"-numa node,nodeid=0 -numa node,nodeid=1 " +"-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,socket-id=0 " "-numa cpu,node-id=0,socket-id=1,core-id=0 " "-numa cpu,node-id=0,socket-id=1,core-id=1,thread-id=0 "
@@ -178,7 +195,7 @@ static void spapr_numa_cpu(const void *data) g_autofree char *cli = NULL; cli =make_cli (data,"-smp 4,cores=4 " -"-numa node,nodeid=0 -numa node,nodeid=1 " +"-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=0,core-id=0 " "-numa cpu,node-id=0,core-id=1 " "-numa cpu,node-id=0,core-id=2 "
@@ -223,7 +240,7 @@ static void aarch64_numa_cpu(const void *data) g_autofree char *cli = NULL; cli =make_cli (data,"-smp 2 " -"-numa node,nodeid=0 -numa node,nodeid=1 " +"-numa node,nodeid=0,memdev=ram -numa node,nodeid=1 " "-numa cpu,node-id=1,thread-id=0 " "-numa cpu,node-id=0,thread-id=1" ); qts =qtest_init (cli);
@@ -263,13 +280,14 @@ static void pc_dynamic_cpu_cfg(const void *data)QDict *resp;QList *cpus;QTestState *qs; + g_autofree char *cli = NULL; - qs =qtest_initf ("%s -nodefaults --preconfig -smp 2" , - data ? (char *)data :"" ); + cli =make_cli (data,"-nodefaults --preconfig -smp 2" ); + qs =qtest_init (cli);/* create 2 numa nodes */ g_assert (!qmp_rsp_is_err (qtest_qmp (qs,"{ 'execute': 'set-numa-node'," -" 'arguments': { 'type': 'node', 'nodeid': 0 } }" ))); +" 'arguments': { 'type': 'node', 'nodeid': 0, 'memdev': 'ram' } }" )));g_assert (!qmp_rsp_is_err (qtest_qmp (qs,"{ 'execute': 'set-numa-node'," " 'arguments': { 'type': 'node', 'nodeid': 1 } }" )));
@@ -325,10 +343,15 @@ int main(int argc, char **argv)if (strcmp (arch,"aarch64" ) ==0 ) {g_string_append (args," -machine virt" ); } +if (!strcmp (arch,"ppc64" )) { +g_string_append (args," -object memory-backend-ram,id=ram,size=512M" ); + }else { +g_string_append (args," -object memory-backend-ram,id=ram,size=128M" ); + }g_test_init (&argc, &argv,NULL ); -qtest_add_data_func ("/numa/mon/default" , args, test_mon_default); +qtest_add_data_func ("/numa/mon/cpus/default" , args, test_def_cpu_split);qtest_add_data_func ("/numa/mon/cpus/explicit" , args, test_mon_explicit);qtest_add_data_func ("/numa/mon/cpus/partial" , args, test_mon_partial);qtest_add_data_func ("/numa/qmp/cpus/query-cpus" , args, test_query_cpus);
@@ -336,6 +359,7 @@ int main(int argc, char **argv)if (!strcmp (arch,"i386" ) || !strcmp (arch,"x86_64" )) {qtest_add_data_func ("/numa/pc/cpu/explicit" , args, pc_numa_cpu);qtest_add_data_func ("/numa/pc/dynamic/cpu" , args, pc_dynamic_cpu_cfg); +qtest_add_data_func ("/numa/pc/legacy/mem" , args, test_pc_legacy_mem); }if (!strcmp (arch,"ppc64" )) {
Signature · 1 line
2.7.4