Skip to contentSkip to conversation

spi: sh-msiof: Do not redefine STR while compile testing

PATCH Superseded Krzysztof Kozlowski 2 participants 3 messages Jan 7, 2020 – Jan 8, 2020 SPI

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 spi: sh-msiof: Do not redefine STR while compile testing

STR is a well-known stringify macro so it should be avoided in drivers to avoid warnings like this (MIPS architecture while compile testing):

drivers/spi/spi-sh-msiof.c:76:0: warning: "STR" redefined
#define STR 0x40 /* Status Register */
arch/mips/include/asm/mipsregs.h:30:0: note: this is the location of the previous definition
#define STR(x) __STR(x)

---
 drivers/spi/spi-sh-msiof.c | 32 ++++++++++++++++----------------
 1 file changed, 16 insertions(+), 16 deletions(-)
drivers/spi/spi-sh-msiof.c +16 -16
index 8f134735291f..f36f0d5165f6 100644
@@ -73,7 +73,7 @@ struct sh_msiof_spi_priv {
 #define RSCR	0x22	/* Receive Clock Select Register (SH, A1, APE6) */
 #define CTR	0x28	/* Control Register */
 #define FCTR	0x30	/* FIFO Control Register */
-#define STR	0x40	/* Status Register */
+#define STATR	0x40	/* Status Register */
 #define IER	0x44	/* Interrupt Enable Register */
 #define TDR1	0x48	/* Transmit Control Data Register 1 (SH, A1) */
 #define TDR2	0x4c	/* Transmit Control Data Register 2 (SH, A1) */
@@ -161,19 +161,19 @@ struct sh_msiof_spi_priv {
 #define FCTR_RFUA_SHIFT	4
 #define FCTR_RFUA(i)	((i) << FCTR_RFUA_SHIFT)
 
-/* STR */
-#define STR_TFEMP	BIT(29) /* Transmit FIFO Empty */
-#define STR_TDREQ	BIT(28) /* Transmit Data Transfer Request */
-#define STR_TEOF	BIT(23) /* Frame Transmission End */
-#define STR_TFSERR	BIT(21) /* Transmit Frame Synchronization Error */
-#define STR_TFOVF	BIT(20) /* Transmit FIFO Overflow */
-#define STR_TFUDF	BIT(19) /* Transmit FIFO Underflow */
-#define STR_RFFUL	BIT(13) /* Receive FIFO Full */
-#define STR_RDREQ	BIT(12) /* Receive Data Transfer Request */
-#define STR_REOF	BIT(7)  /* Frame Reception End */
-#define STR_RFSERR	BIT(5)  /* Receive Frame Synchronization Error */
-#define STR_RFUDF	BIT(4)  /* Receive FIFO Underflow */
-#define STR_RFOVF	BIT(3)  /* Receive FIFO Overflow */
+/* STATR */
+#define STATR_TFEMP	BIT(29) /* Transmit FIFO Empty */
+#define STATR_TDREQ	BIT(28) /* Transmit Data Transfer Request */
+#define STATR_TEOF	BIT(23) /* Frame Transmission End */
+#define STATR_TFSERR	BIT(21) /* Transmit Frame Synchronization Error */
+#define STATR_TFOVF	BIT(20) /* Transmit FIFO Overflow */
+#define STATR_TFUDF	BIT(19) /* Transmit FIFO Underflow */
+#define STATR_RFFUL	BIT(13) /* Receive FIFO Full */
+#define STATR_RDREQ	BIT(12) /* Receive Data Transfer Request */
+#define STATR_REOF	BIT(7)  /* Frame Reception End */
+#define STATR_RFSERR	BIT(5)  /* Receive Frame Synchronization Error */
+#define STATR_RFUDF	BIT(4)  /* Receive FIFO Underflow */
+#define STATR_RFOVF	BIT(3)  /* Receive FIFO Overflow */
 
 /* IER */
 #define IER_TDMAE	BIT(31) /* Transmit Data DMA Transfer Req. Enable */
@@ -403,8 +403,8 @@ static void sh_msiof_spi_set_mode_regs(struct sh_msiof_spi_priv *p,
 
 static void sh_msiof_reset_str(struct sh_msiof_spi_priv *p)
 {
-	sh_msiof_write(p, STR,
-		       sh_msiof_read(p, STR) & ~(STR_TDREQ | STR_RDREQ));
+	sh_msiof_write(p, STATR,
+		       sh_msiof_read(p, STATR) & ~(STATR_TDREQ | STATR_RDREQ));
 }
 
 static void sh_msiof_spi_write_fifo_8(struct sh_msiof_spi_priv *p,
Signature · 1 line
2.7.4
#1 lore raw

Hi Krzysztof,

Quoted 9 lines · Krzysztof Kozlowski

STR is a well-known stringify macro so it should be avoided in drivers to avoid warnings like this (MIPS architecture while compile testing):

drivers/spi/spi-sh-msiof.c:76:0: warning: "STR" redefined
#define STR 0x40 /* Status Register */
arch/mips/include/asm/mipsregs.h:30:0: note: this is the location of the previous definition
#define STR(x) __STR(x)

Thanks for your patch!

drivers/spi/spi-sh-msiof.c struct sh_msiof_spi_priv { · line 76

Quoted 8 lines
drivers/spi/spi-sh-msiof.c +1 -1
@@ -73,7 +73,7 @@ struct sh_msiof_spi_priv {
 #define RSCR   0x22    /* Receive Clock Select Register (SH, A1, APE6) */
 #define CTR    0x28    /* Control Register */
 #define FCTR   0x30    /* FIFO Control Register */
-#define STR    0x40    /* Status Register */
+#define STATR  0x40    /* Status Register */

The datasheets call this register "SISTR", so I prefer to use that instead. Actually all registers have this "SI" ("Serial Interface"?) prefix. Shall I add this to my TODO-list?

Quoted 23 lines
drivers/spi/spi-sh-msiof.c +3 -13
 #define IER    0x44    /* Interrupt Enable Register */
 #define TDR1   0x48    /* Transmit Control Data Register 1 (SH, A1) */
 #define TDR2   0x4c    /* Transmit Control Data Register 2 (SH, A1) */
@@ -161,19 +161,19 @@ struct sh_msiof_spi_priv {
 #define FCTR_RFUA_SHIFT        4
 #define FCTR_RFUA(i)   ((i) << FCTR_RFUA_SHIFT)
 
-/* STR */
-#define STR_TFEMP      BIT(29) /* Transmit FIFO Empty */
-#define STR_TDREQ      BIT(28) /* Transmit Data Transfer Request */
-#define STR_TEOF       BIT(23) /* Frame Transmission End */
-#define STR_TFSERR     BIT(21) /* Transmit Frame Synchronization Error */
-#define STR_TFOVF      BIT(20) /* Transmit FIFO Overflow */
-#define STR_TFUDF      BIT(19) /* Transmit FIFO Underflow */
-#define STR_RFFUL      BIT(13) /* Receive FIFO Full */
-#define STR_RDREQ      BIT(12) /* Receive Data Transfer Request */
-#define STR_REOF       BIT(7)  /* Frame Reception End */
-#define STR_RFSERR     BIT(5)  /* Receive Frame Synchronization Error */
-#define STR_RFUDF      BIT(4)  /* Receive FIFO Underflow */
-#define STR_RFOVF      BIT(3)  /* Receive FIFO Overflow */
+/* STATR */
+#define STATR_TFEMP    BIT(29) /* Transmit FIFO Empty */
+#define STATR_TDREQ    BIT(28) /* Transmit Data Transfer Request */

drivers/spi/spi-sh-msiof.c struct sh_msiof_spi_priv { · line 176

Quoted 10 lines
drivers/spi/spi-sh-msiof.c +10 -0
+#define STATR_TEOF     BIT(23) /* Frame Transmission End */
+#define STATR_TFSERR   BIT(21) /* Transmit Frame Synchronization Error */
+#define STATR_TFOVF    BIT(20) /* Transmit FIFO Overflow */
+#define STATR_TFUDF    BIT(19) /* Transmit FIFO Underflow */
+#define STATR_RFFUL    BIT(13) /* Receive FIFO Full */
+#define STATR_RDREQ    BIT(12) /* Receive Data Transfer Request */
+#define STATR_REOF     BIT(7)  /* Frame Reception End */
+#define STATR_RFSERR   BIT(5)  /* Receive Frame Synchronization Error */
+#define STATR_RFUDF    BIT(4)  /* Receive FIFO Underflow */
+#define STATR_RFOVF    BIT(3)  /* Receive FIFO Overflow */

[...]

Gr{oetje,eeting}s,

Geert

Signature · 5 lines
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
#2 lore raw
Quoted 15 lines · Geert Uytterhoeven

Hi Krzysztof,

Quoted 9 lines · Krzysztof Kozlowski

STR is a well-known stringify macro so it should be avoided in drivers to avoid warnings like this (MIPS architecture while compile testing):

drivers/spi/spi-sh-msiof.c:76:0: warning: "STR" redefined
#define STR 0x40 /* Status Register */
arch/mips/include/asm/mipsregs.h:30:0: note: this is the location of the previous definition
#define STR(x) __STR(x)

Thanks for your patch!

Quoted 12 lines

drivers/spi/spi-sh-msiof.c struct sh_msiof_spi_priv { · line 76

Quoted 8 lines
drivers/spi/spi-sh-msiof.c +1 -1
@@ -73,7 +73,7 @@ struct sh_msiof_spi_priv {
 #define RSCR   0x22    /* Receive Clock Select Register (SH, A1, APE6) */
 #define CTR    0x28    /* Control Register */
 #define FCTR   0x30    /* FIFO Control Register */
-#define STR    0x40    /* Status Register */
+#define STATR  0x40    /* Status Register */

The datasheets call this register "SISTR", so I prefer to use that instead. Actually all registers have this "SI" ("Serial Interface"?) prefix. Shall I add this to my TODO-list?

I can send a v2 changing all register names there to SISTR-like names.

Best regards,
Krzysztof