Skip to contentSkip to conversation

Track loadavg changes during full nohz

PATCH Applied Scott Wood 3 participants 6 messages Jan 11, 2020 – Jan 29, 2020

Subsystems (2)
lore
Share & tools
lore

Scott Wood

author
#0 lore raw

v2 cover Track loadavg changes during full nohz

v2: drop the first couple patches that appear unnecessary

Peter Zijlstra (Intel) (1):
timers/nohz: Update nohz load in remote tick

Scott Wood (1):
sched/core: Don't skip remote tick for idle cpus

 include/linux/sched/nohz.h |  2 ++
 kernel/sched/core.c        | 22 +++++++++++++---------
 kernel/sched/loadavg.c     | 33 +++++++++++++++++++++++----------
 3 files changed, 38 insertions(+), 19 deletions(-)
Signature · 1 line
1.8.3.1
author
#1 lore raw

PATCH v2 1/2 sched/core: Don't skip remote tick for idle cpus

This will be used in the next patch to get a loadavg update from nohz cpus. The delta check is skipped because idle_sched_class doesn't update se.exec_start.

---
 kernel/sched/core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
kernel/sched/core.c +10 -8
index 90e4b00ace89..dfb8ea801700 100644
@@ -3668,22 +3668,24 @@ static void sched_tick_remote(struct work_struct *work)
 	 * statistics and checks timeslices in a time-independent way, regardless
 	 * of when exactly it is running.
 	 */
-	if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu))
+	if (!tick_nohz_tick_stopped_cpu(cpu))
 		goto out_requeue;
 
 	rq_lock_irq(rq, &rf);
 	curr = rq->curr;
-	if (is_idle_task(curr) || cpu_is_offline(cpu))
+	if (cpu_is_offline(cpu))
 		goto out_unlock;
 
 	update_rq_clock(rq);
-	delta = rq_clock_task(rq) - curr->se.exec_start;
 
-	/*
-	 * Make sure the next tick runs within a reasonable
-	 * amount of time.
-	 */
-	WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
+	if (!is_idle_task(curr)) {
+		/*
+		 * Make sure the next tick runs within a reasonable
+		 * amount of time.
+		 */
+		delta = rq_clock_task(rq) - curr->se.exec_start;
+		WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
+	}
 	curr->sched_class->task_tick(rq, curr, 0);
 
 out_unlock:
Signature · 1 line
1.8.3.1
merge bot Applied
#2 lore raw

[tip: sched/core] sched/core: Don't skip remote tick for idle CPUs

The following commit has been merged into the sched/core branch of tip:

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     488603b815a7514c7009e6fc339d74ed4a30f343
Gitweb:        https://git.kernel.org/tip/488603b815a7514c7009e6fc339d74ed4a30f343
Author:        Scott Wood <[email protected]>
AuthorDate:    Sat, 11 Jan 2020 04:53:38 -05:00
Committer:     Ingo Molnar <[email protected]>
CommitterDate: Tue, 28 Jan 2020 21:36:16 +01:00

sched/core: Don't skip remote tick for idle CPUs

This will be used in the next patch to get a loadavg update from nohz cpus. The delta check is skipped because idle_sched_class doesn't update se.exec_start.

---
 kernel/sched/core.c | 18 ++++++++++--------
 1 file changed, 10 insertions(+), 8 deletions(-)
kernel/sched/core.c +10 -8
index fc1dfc0..cf8b33d 100644
@@ -3669,22 +3669,24 @@ static void sched_tick_remote(struct work_struct *work)
 	 * statistics and checks timeslices in a time-independent way, regardless
 	 * of when exactly it is running.
 	 */
-	if (idle_cpu(cpu) || !tick_nohz_tick_stopped_cpu(cpu))
+	if (!tick_nohz_tick_stopped_cpu(cpu))
 		goto out_requeue;
 
 	rq_lock_irq(rq, &rf);
 	curr = rq->curr;
-	if (is_idle_task(curr) || cpu_is_offline(cpu))
+	if (cpu_is_offline(cpu))
 		goto out_unlock;
 
 	update_rq_clock(rq);
-	delta = rq_clock_task(rq) - curr->se.exec_start;
 
-	/*
-	 * Make sure the next tick runs within a reasonable
-	 * amount of time.
-	 */
-	WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
+	if (!is_idle_task(curr)) {
+		/*
+		 * Make sure the next tick runs within a reasonable
+		 * amount of time.
+		 */
+		delta = rq_clock_task(rq) - curr->se.exec_start;
+		WARN_ON_ONCE(delta > (u64)NSEC_PER_SEC * 3);
+	}
 	curr->sched_class->task_tick(rq, curr, 0);
 
 out_unlock:
author
#3 lore raw

PATCH v2 2/2 timers/nohz: Update nohz load in remote tick

In reply to Scott Wood

From: "Peter Zijlstra (Intel)" <[email protected]>

The way loadavg is tracked during nohz only pays attention to the load upon entering nohz. This can be particularly noticeable if full nohz is entered while non-idle, and then the cpu goes idle and stays that way for a long time.

Use the remote tick to ensure that full nohz cpus report their deltas within a reasonable time.

[swood: added changelog and removed recheck of stopped tick]
---
 include/linux/sched/nohz.h |  2 ++
 kernel/sched/core.c        |  4 +++-
 kernel/sched/loadavg.c     | 33 +++++++++++++++++++++++----------
 3 files changed, 28 insertions(+), 11 deletions(-)
include/linux/sched/nohz.h +2 -0
index 1abe91ff6e4a..6d67e9a5af6b 100644
@@ -15,9 +15,11 @@ static inline void nohz_balance_enter_idle(int cpu) { }
 
 #ifdef CONFIG_NO_HZ_COMMON
 void calc_load_nohz_start(void);
+void calc_load_nohz_remote(struct rq *rq);
 void calc_load_nohz_stop(void);
 #else
 static inline void calc_load_nohz_start(void) { }
+static inline void calc_load_nohz_remote(struct rq *rq) { }
 static inline void calc_load_nohz_stop(void) { }
 #endif /* CONFIG_NO_HZ_COMMON */
 
kernel/sched/core.c +3 -1
index dfb8ea801700..2e4a505e48af 100644
@@ -3676,6 +3676,7 @@ static void sched_tick_remote(struct work_struct *work)
 	if (cpu_is_offline(cpu))
 		goto out_unlock;
 
+	curr = rq->curr;
 	update_rq_clock(rq);
 
 	if (!is_idle_task(curr)) {
@@ -3688,10 +3689,11 @@ static void sched_tick_remote(struct work_struct *work)
 	}
 	curr->sched_class->task_tick(rq, curr, 0);
 
+	calc_load_nohz_remote(rq);
 out_unlock:
 	rq_unlock_irq(rq, &rf);
-
 out_requeue:
+
 	/*
 	 * Run the remote tick once per second (1Hz). This arbitrary
 	 * frequency is large enough to avoid overload but short enough
kernel/sched/loadavg.c +23 -10
index 28a516575c18..de22da666ac7 100644
@@ -231,16 +231,11 @@ static inline int calc_load_read_idx(void)
 	return calc_load_idx & 1;
 }
 
-void calc_load_nohz_start(void)
+static void calc_load_nohz_fold(struct rq *rq)
 {
-	struct rq *this_rq = this_rq();
 	long delta;
 
-	/*
-	 * We're going into NO_HZ mode, if there's any pending delta, fold it
-	 * into the pending NO_HZ delta.
-	 */
-	delta = calc_load_fold_active(this_rq, 0);
+	delta = calc_load_fold_active(rq, 0);
 	if (delta) {
 		int idx = calc_load_write_idx();
 
@@ -248,6 +243,24 @@ void calc_load_nohz_start(void)
 	}
 }
 
+void calc_load_nohz_start(void)
+{
+	/*
+	 * We're going into NO_HZ mode, if there's any pending delta, fold it
+	 * into the pending NO_HZ delta.
+	 */
+	calc_load_nohz_fold(this_rq());
+}
+
+/*
+ * Keep track of the load for NOHZ_FULL, must be called between
+ * calc_load_nohz_{start,stop}().
+ */
+void calc_load_nohz_remote(struct rq *rq)
+{
+	calc_load_nohz_fold(rq);
+}
+
 void calc_load_nohz_stop(void)
 {
 	struct rq *this_rq = this_rq();
@@ -268,7 +281,7 @@ void calc_load_nohz_stop(void)
 		this_rq->calc_load_update += LOAD_FREQ;
 }
 
-static long calc_load_nohz_fold(void)
+static long calc_load_nohz_read(void)
 {
 	int idx = calc_load_read_idx();
 	long delta = 0;
@@ -323,7 +336,7 @@ static void calc_global_nohz(void)
 }
 #else /* !CONFIG_NO_HZ_COMMON */
 
-static inline long calc_load_nohz_fold(void) { return 0; }
+static inline long calc_load_nohz_read(void) { return 0; }
 static inline void calc_global_nohz(void) { }
 
 #endif /* CONFIG_NO_HZ_COMMON */
@@ -346,7 +359,7 @@ void calc_global_load(unsigned long ticks)
 	/*
 	 * Fold the 'old' NO_HZ-delta to include all NO_HZ CPUs.
 	 */
-	delta = calc_load_nohz_fold();
+	delta = calc_load_nohz_read();
 	if (delta)
 		atomic_long_add(delta, &calc_load_tasks);
 
Signature · 1 line
1.8.3.1
#4 lore raw

[tip: sched/core] timers/nohz: Update NOHZ load in remote tick

The following commit has been merged into the sched/core branch of tip:

The following commit has been merged into the sched/core branch of tip:

Commit-ID:     ebc0f83c78a2d26384401ecf2d2fa48063c0ee27
Gitweb:        https://git.kernel.org/tip/ebc0f83c78a2d26384401ecf2d2fa48063c0ee27
Author:        Peter Zijlstra (Intel) <[email protected]>
AuthorDate:    Sat, 11 Jan 2020 04:53:39 -05:00
Committer:     Ingo Molnar <[email protected]>
CommitterDate: Tue, 28 Jan 2020 21:36:44 +01:00

timers/nohz: Update NOHZ load in remote tick

The way loadavg is tracked during nohz only pays attention to the load upon entering nohz. This can be particularly noticeable if full nohz is entered while non-idle, and then the cpu goes idle and stays that way for a long time.

Use the remote tick to ensure that full nohz cpus report their deltas within a reasonable time.

[ swood: Added changelog and removed recheck of stopped tick. ]

---
 include/linux/sched/nohz.h |  2 ++
 kernel/sched/core.c        |  4 +++-
 kernel/sched/loadavg.c     | 33 +++++++++++++++++++++++----------
 3 files changed, 28 insertions(+), 11 deletions(-)
include/linux/sched/nohz.h +2 -0
index 1abe91f..6d67e9a 100644
@@ -15,9 +15,11 @@ static inline void nohz_balance_enter_idle(int cpu) { }
 
 #ifdef CONFIG_NO_HZ_COMMON
 void calc_load_nohz_start(void);
+void calc_load_nohz_remote(struct rq *rq);
 void calc_load_nohz_stop(void);
 #else
 static inline void calc_load_nohz_start(void) { }
+static inline void calc_load_nohz_remote(struct rq *rq) { }
 static inline void calc_load_nohz_stop(void) { }
 #endif /* CONFIG_NO_HZ_COMMON */
 
kernel/sched/core.c +3 -1
index cf8b33d..4ff03c2 100644
@@ -3677,6 +3677,7 @@ static void sched_tick_remote(struct work_struct *work)
 	if (cpu_is_offline(cpu))
 		goto out_unlock;
 
+	curr = rq->curr;
 	update_rq_clock(rq);
 
 	if (!is_idle_task(curr)) {
@@ -3689,10 +3690,11 @@ static void sched_tick_remote(struct work_struct *work)
 	}
 	curr->sched_class->task_tick(rq, curr, 0);
 
+	calc_load_nohz_remote(rq);
 out_unlock:
 	rq_unlock_irq(rq, &rf);
-
 out_requeue:
+
 	/*
 	 * Run the remote tick once per second (1Hz). This arbitrary
 	 * frequency is large enough to avoid overload but short enough
kernel/sched/loadavg.c +23 -10
index 28a5165..de22da6 100644
@@ -231,16 +231,11 @@ static inline int calc_load_read_idx(void)
 	return calc_load_idx & 1;
 }
 
-void calc_load_nohz_start(void)
+static void calc_load_nohz_fold(struct rq *rq)
 {
-	struct rq *this_rq = this_rq();
 	long delta;
 
-	/*
-	 * We're going into NO_HZ mode, if there's any pending delta, fold it
-	 * into the pending NO_HZ delta.
-	 */
-	delta = calc_load_fold_active(this_rq, 0);
+	delta = calc_load_fold_active(rq, 0);
 	if (delta) {
 		int idx = calc_load_write_idx();
 
@@ -248,6 +243,24 @@ void calc_load_nohz_start(void)
 	}
 }
 
+void calc_load_nohz_start(void)
+{
+	/*
+	 * We're going into NO_HZ mode, if there's any pending delta, fold it
+	 * into the pending NO_HZ delta.
+	 */
+	calc_load_nohz_fold(this_rq());
+}
+
+/*
+ * Keep track of the load for NOHZ_FULL, must be called between
+ * calc_load_nohz_{start,stop}().
+ */
+void calc_load_nohz_remote(struct rq *rq)
+{
+	calc_load_nohz_fold(rq);
+}
+
 void calc_load_nohz_stop(void)
 {
 	struct rq *this_rq = this_rq();
@@ -268,7 +281,7 @@ void calc_load_nohz_stop(void)
 		this_rq->calc_load_update += LOAD_FREQ;
 }
 
-static long calc_load_nohz_fold(void)
+static long calc_load_nohz_read(void)
 {
 	int idx = calc_load_read_idx();
 	long delta = 0;
@@ -323,7 +336,7 @@ static void calc_global_nohz(void)
 }
 #else /* !CONFIG_NO_HZ_COMMON */
 
-static inline long calc_load_nohz_fold(void) { return 0; }
+static inline long calc_load_nohz_read(void) { return 0; }
 static inline void calc_global_nohz(void) { }
 
 #endif /* CONFIG_NO_HZ_COMMON */
@@ -346,7 +359,7 @@ void calc_global_load(unsigned long ticks)
 	/*
 	 * Fold the 'old' NO_HZ-delta to include all NO_HZ CPUs.
 	 */
-	delta = calc_load_nohz_fold();
+	delta = calc_load_nohz_read();
 	if (delta)
 		atomic_long_add(delta, &calc_load_tasks);
 
maintainer
#5 lore raw
In reply to Scott Wood
Quoted 5 lines · Scott Wood

v2: drop the first couple patches that appear unnecessary

Peter Zijlstra (Intel) (1):
timers/nohz: Update nohz load in remote tick

Quoted 7 lines

Scott Wood (1):
sched/core: Don't skip remote tick for idle cpus

 include/linux/sched/nohz.h |  2 ++
 kernel/sched/core.c        | 22 +++++++++++++---------
 kernel/sched/loadavg.c     | 33 +++++++++++++++++++++++----------
 3 files changed, 38 insertions(+), 19 deletions(-)

Thanks, I've queued them.