Skip to contentSkip to conversation

ASoC: Add MediaTek MT6660 Speaker Amp Driver

PATCH In review Jeff Chang 2 participants 2 messages Jan 16, 2020 – Jan 21, 2020

Subsystems (3)
lore
Share & tools
lore

Jeff Chang

author
#0 lore raw

PATCH v7 1/1 ASoC: Add MediaTek MT6660 Speaker Amp Driver

From: Jeff Chang <[email protected]>

The MT6660 is a boosted BTL class-D amplifier with V/I sensing. A built-in DC-DC step-up converter is used to provide efficient power for class-D amplifier with multi-level class-G operation. The digital audio interface supports I2S, left-justified, right-justified, TDM and DSP A/B format for audio in with a data out used for chip information like voltage sense and current sense, which are able to be monitored via DATAO through proper

---
 sound/soc/codecs/Kconfig  |  10 +
 sound/soc/codecs/Makefile |   2 +
 sound/soc/codecs/mt6660.c | 509 ++++++++++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/mt6660.h |  77 +++++++
 4 files changed, 598 insertions(+)
 create mode 100644 sound/soc/codecs/mt6660.c
 create mode 100644 sound/soc/codecs/mt6660.h

changelogs between v7 & v6
- remove blank line.
- remove unused structure
- use regmap instead of raw access.

changelogs between v6 & v5
- remove parse DT and apply function about Chip INIT SETTING.
- remove DT binding Documentation.

changelogs between v5 & v4
- remove redundant initialization.
- use packed structures.
- remove useless switch case.
- take care of memory allocation failures.

changelogs between v4 & v3
- remove unnecessary kcontrols.
- modify copy right header.
- use dev_dbg instead of dev_info.
- add necessary debug message.
- add DT binding documentation.
- add space before } at every table.

changelogs between v3 & v2

- modify MT6660 Kconfig, remove unnecessary selection.
- remove my own debug io interface. use standard regmap for debugging.
- remove regmap volatile ops, we do not use cache.
- remove component io read/write function, use snd_soc_component_init_regmap.
- remove init setting write code. Using parsing dts to set them.
- remove unnecessary pr_info log message.
- remove mt6660_component_put_volsw. Using snd_soc_get_volsw.

sound/soc/codecs/Kconfig +10 -0
index 229cc89..2f627cf 100644
@@ -122,6 +122,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ML26124 if I2C
 	select SND_SOC_MT6351 if MTK_PMIC_WRAP
 	select SND_SOC_MT6358 if MTK_PMIC_WRAP
+	select SND_SOC_MT6660 if I2C
 	select SND_SOC_NAU8540 if I2C
 	select SND_SOC_NAU8810 if I2C
 	select SND_SOC_NAU8822 if I2C
@@ -1465,6 +1466,15 @@ config SND_SOC_MT6358
 	  Enable support for the platform which uses MT6358 as
 	  external codec device.
 
+config SND_SOC_MT6660
+	tristate "Mediatek MT6660 Speaker Amplifier"
+	depends on I2C
+	help
+	  MediaTek MT6660 is a smart power amplifier which contain
+	  speaker protection, multi-band DRC, equalizer functions.
+	  Select N if you don't have MT6660 on board.
+	  Select M to build this as module.
+
 config SND_SOC_NAU8540
        tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
        depends on I2C
sound/soc/codecs/Makefile +2 -0
index c498373..2b6814c 100644
@@ -119,6 +119,7 @@ snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
 snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o
 snd-soc-mt6351-objs := mt6351.o
 snd-soc-mt6358-objs := mt6358.o
+snd-soc-mt6660-objs := mt6660.o
 snd-soc-nau8540-objs := nau8540.o
 snd-soc-nau8810-objs := nau8810.o
 snd-soc-nau8822-objs := nau8822.o
@@ -403,6 +404,7 @@ obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
 obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o
 obj-$(CONFIG_SND_SOC_MT6351)	+= snd-soc-mt6351.o
 obj-$(CONFIG_SND_SOC_MT6358)	+= snd-soc-mt6358.o
+obj-$(CONFIG_SND_SOC_MT6660)	+= snd-soc-mt6660.o
 obj-$(CONFIG_SND_SOC_NAU8540)   += snd-soc-nau8540.o
 obj-$(CONFIG_SND_SOC_NAU8810)   += snd-soc-nau8810.o
 obj-$(CONFIG_SND_SOC_NAU8822)   += snd-soc-nau8822.o
sound/soc/codecs/mt6660.c new file +509 -0

509 lines not on this page · raw message

sound/soc/codecs/mt6660.h new file +77 -0

77 lines not on this page · raw message

Signature · 1 line
2.7.4
maintainer
#1 lore raw

Applied "ASoC: Add MediaTek MT6660 Speaker Amp Driver" to the asoc tree

The patch

ASoC: Add MediaTek MT6660 Speaker Amp Driver

has been applied to the asoc tree at

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.6

All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying to this mail.

Thanks,
Mark

From f289e55c6eeb4391101a42334e8c69bf8c9fe987 Mon Sep 17 00:00:00 2001
From: Jeff Chang <[email protected]>
Date: Thu, 16 Jan 2020 13:46:37 +0800
Subject: [PATCH] ASoC: Add MediaTek MT6660 Speaker Amp Driver

The MT6660 is a boosted BTL class-D amplifier with V/I sensing. A built-in DC-DC step-up converter is used to provide efficient power for class-D amplifier with multi-level class-G operation. The digital audio interface supports I2S, left-justified, right-justified, TDM and DSP A/B format for audio in with a data out used for chip information like voltage sense and current sense, which are able to be monitored via DATAO through proper

---
 sound/soc/codecs/Kconfig  |  10 +
 sound/soc/codecs/Makefile |   2 +
 sound/soc/codecs/mt6660.c | 509 ++++++++++++++++++++++++++++++++++++++
 sound/soc/codecs/mt6660.h |  77 ++++++
 4 files changed, 598 insertions(+)
 create mode 100644 sound/soc/codecs/mt6660.c
 create mode 100644 sound/soc/codecs/mt6660.h
sound/soc/codecs/Kconfig +10 -0
index de3f13dafc3c..52c51a9c5505 100644
@@ -125,6 +125,7 @@ config SND_SOC_ALL_CODECS
 	select SND_SOC_ML26124 if I2C
 	select SND_SOC_MT6351 if MTK_PMIC_WRAP
 	select SND_SOC_MT6358 if MTK_PMIC_WRAP
+	select SND_SOC_MT6660 if I2C
 	select SND_SOC_NAU8540 if I2C
 	select SND_SOC_NAU8810 if I2C
 	select SND_SOC_NAU8822 if I2C
@@ -1573,6 +1574,15 @@ config SND_SOC_MT6358
 	  Enable support for the platform which uses MT6358 as
 	  external codec device.
 
+config SND_SOC_MT6660
+	tristate "Mediatek MT6660 Speaker Amplifier"
+	depends on I2C
+	help
+	  MediaTek MT6660 is a smart power amplifier which contain
+	  speaker protection, multi-band DRC, equalizer functions.
+	  Select N if you don't have MT6660 on board.
+	  Select M to build this as module.
+
 config SND_SOC_NAU8540
        tristate "Nuvoton Technology Corporation NAU85L40 CODEC"
        depends on I2C
sound/soc/codecs/Makefile +2 -0
index 751f2b4d095b..7bd87a6371cf 100644
@@ -123,6 +123,7 @@ snd-soc-msm8916-analog-objs := msm8916-wcd-analog.o
 snd-soc-msm8916-digital-objs := msm8916-wcd-digital.o
 snd-soc-mt6351-objs := mt6351.o
 snd-soc-mt6358-objs := mt6358.o
+snd-soc-mt6660-objs := mt6660.o
 snd-soc-nau8540-objs := nau8540.o
 snd-soc-nau8810-objs := nau8810.o
 snd-soc-nau8822-objs := nau8822.o
@@ -419,6 +420,7 @@ obj-$(CONFIG_SND_SOC_MSM8916_WCD_ANALOG) +=snd-soc-msm8916-analog.o
 obj-$(CONFIG_SND_SOC_MSM8916_WCD_DIGITAL) +=snd-soc-msm8916-digital.o
 obj-$(CONFIG_SND_SOC_MT6351)	+= snd-soc-mt6351.o
 obj-$(CONFIG_SND_SOC_MT6358)	+= snd-soc-mt6358.o
+obj-$(CONFIG_SND_SOC_MT6660)	+= snd-soc-mt6660.o
 obj-$(CONFIG_SND_SOC_NAU8540)   += snd-soc-nau8540.o
 obj-$(CONFIG_SND_SOC_NAU8810)   += snd-soc-nau8810.o
 obj-$(CONFIG_SND_SOC_NAU8822)   += snd-soc-nau8822.o
sound/soc/codecs/mt6660.c new file +509 -0

509 lines not on this page · raw message

sound/soc/codecs/mt6660.h new file +77 -0

77 lines not on this page · raw message

Signature · 1 line
2.20.1