drm: Parse Colorimetry data block from EDID
Subsystems (3)
PATCH 1/1 drm: Parse Colorimetry data block from EDID
From: Uma Shankar <[email protected]>
CEA 861.3 spec adds colorimetry data block for HDMI. Parsing the block to get the colorimetry data from panel.
This was posted by Uma Shankar at
https://patchwork.kernel.org/patch/10861327/
Modified by Abhinav Kumar:
- Use macros to distinguish the bit fields for clarity
--- drivers/gpu/drm/drm_edid.c | 54 +++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 3 +++ include/drm/drm_edid.h | 11 +++++++++ 3 files changed, 68 insertions(+)
drivers/gpu/drm/drm_edid.c +54 -0
@@ -3136,6 +3136,7 @@ static int drm_cvt_modes(struct drm_connector *connector,#define VIDEO_BLOCK 0x02#define VENDOR_BLOCK 0x03#define SPEAKER_BLOCK 0x04 +#define COLORIMETRY_DATA_BLOCK 0x5#define HDR_STATIC_METADATA_BLOCK 0x6#define USE_EXTENDED_TAG 0x07#define EXT_VIDEO_CAPABILITY_BLOCK 0x00
@@ -4199,6 +4200,57 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) mode->clock = clock; } +static bool cea_db_is_hdmi_colorimetry_data_block (const u8 *db) +{ +if (cea_db_tag (db) !=USE_EXTENDED_TAG ) +return false; + +if (db[1 ] !=COLORIMETRY_DATA_BLOCK ) +return false; + +if (cea_db_payload_len (db) <2 ) +return false; + +return true; +} + +static void +drm_parse_colorimetry_data_block (struct drm_connector *connector,const u8 *db) +{ +struct drm_hdmi_info *info = &connector->display_info.hdmi; + +/* As per CEA 861-G spec */ +/* Byte 3 Bit 0: xvYCC_601 */ +if (db[2 ] &BIT (0 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_601; +/* Byte 3 Bit 1: xvYCC_709 */ +if (db[2 ] &BIT (1 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_709; +/* Byte 3 Bit 2: sYCC_601 */ +if (db[2 ] &BIT (2 )) + info->colorimetry |= DRM_EDID_CLRMETRY_sYCC_601; +/* Byte 3 Bit 3: ADBYCC_601 */ +if (db[2 ] &BIT (3 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADBYCC_601 ; +/* Byte 3 Bit 4: ADB_RGB */ +if (db[2 ] &BIT (4 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADB_RGB ; +/* Byte 3 Bit 5: BT2020_CYCC */ +if (db[2 ] &BIT (5 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_CYCC ; +/* Byte 3 Bit 6: BT2020_YCC */ +if (db[2 ] &BIT (6 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_YCC ; +/* Byte 3 Bit 7: BT2020_RGB */ +if (db[2 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_RGB ; +/* Byte 4 Bit 7: DCI-P3 */ +if (db[3 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_DCI_P3 ; + +DRM_DEBUG_KMS ("Supported Colorimetry 0x%x\n" , info->colorimetry); +} +static bool cea_db_is_hdmi_hdr_metadata_block (const u8 *db) {if (cea_db_tag (db) !=USE_EXTENDED_TAG )
@@ -4877,6 +4929,8 @@ static void drm_parse_cea_ext(struct drm_connector *connector,drm_parse_vcdb (connector, db);if (cea_db_is_hdmi_hdr_metadata_block (db))drm_parse_hdr_metadata_block (connector, db); +if (cea_db_is_hdmi_colorimetry_data_block (db)) +drm_parse_colorimetry_data_block (connector, db); } }
include/drm/drm_connector.h +3 -0
@@ -207,6 +207,9 @@ struct drm_hdmi_info {/** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + +/* @colorimetry: bitmap of supported colorimetry modes */ +u16 colorimetry; };/**
include/drm/drm_edid.h +11 -0
@@ -224,6 +224,17 @@ struct detailed_timing { DRM_EDID_YCBCR420_DC_36 | \ DRM_EDID_YCBCR420_DC_30) +/* Supported Colorimetry from colorimetry data block */ +#define DRM_EDID_CLRMETRY_xvYCC_601 (1 << 0) +#define DRM_EDID_CLRMETRY_xvYCC_709 (1 << 1) +#define DRM_EDID_CLRMETRY_sYCC_601 (1 << 2) +#define DRM_EDID_CLRMETRY_ADBYCC_601 (1 << 3) +#define DRM_EDID_CLRMETRY_ADB_RGB (1 << 4) +#define DRM_EDID_CLRMETRY_BT2020_CYCC (1 << 5) +#define DRM_EDID_CLRMETRY_BT2020_YCC (1 << 6) +#define DRM_EDID_CLRMETRY_BT2020_RGB (1 << 7) +#define DRM_EDID_CLRMETRY_DCI_P3 (1 << 15) +/* ELD Header Block */ #define DRM_ELD_HEADER_BLOCK_SIZE 4
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 5 lines · Abhinav Kumar
From: Uma Shankar <[email protected]>
CEA 861.3 spec adds colorimetry data block for HDMI. Parsing the block to get the colorimetry data from panel.
Why?
Quoted 137 lines
This was posted by Uma Shankar at
https://patchwork.kernel.org/patch/10861327/Modified by Abhinav Kumar:
- Use macros to distinguish the bit fields for claritySigned-off-by Uma Shankar <[email protected]>Signed-off-by Abhinav Kumar <[email protected]>--- drivers/gpu/drm/drm_edid.c | 54 +++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 3 +++ include/drm/drm_edid.h | 11 +++++++++ 3 files changed, 68 insertions(+)drivers/gpu/drm/drm_edid.c +54
-0@@ -3136,6 +3136,7 @@ static int drm_cvt_modes(struct drm_connector *connector,#define VIDEO_BLOCK 0x02#define VENDOR_BLOCK 0x03#define SPEAKER_BLOCK 0x04 +#define COLORIMETRY_DATA_BLOCK 0x5#define HDR_STATIC_METADATA_BLOCK 0x6#define USE_EXTENDED_TAG 0x07#define EXT_VIDEO_CAPABILITY_BLOCK 0x00@@ -4199,6 +4200,57 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) mode->clock = clock; } +static bool cea_db_is_hdmi_colorimetry_data_block (const u8 *db) +{ +if (cea_db_tag (db) !=USE_EXTENDED_TAG ) +return false; + +if (db[1 ] !=COLORIMETRY_DATA_BLOCK ) +return false; + +if (cea_db_payload_len (db) <2 ) +return false; + +return true; +} + +static void +drm_parse_colorimetry_data_block (struct drm_connector *connector,const u8 *db) +{ +struct drm_hdmi_info *info = &connector->display_info.hdmi; + +/* As per CEA 861-G spec */ +/* Byte 3 Bit 0: xvYCC_601 */ +if (db[2 ] &BIT (0 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_601; +/* Byte 3 Bit 1: xvYCC_709 */ +if (db[2 ] &BIT (1 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_709; +/* Byte 3 Bit 2: sYCC_601 */ +if (db[2 ] &BIT (2 )) + info->colorimetry |= DRM_EDID_CLRMETRY_sYCC_601; +/* Byte 3 Bit 3: ADBYCC_601 */ +if (db[2 ] &BIT (3 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADBYCC_601 ; +/* Byte 3 Bit 4: ADB_RGB */ +if (db[2 ] &BIT (4 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADB_RGB ; +/* Byte 3 Bit 5: BT2020_CYCC */ +if (db[2 ] &BIT (5 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_CYCC ; +/* Byte 3 Bit 6: BT2020_YCC */ +if (db[2 ] &BIT (6 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_YCC ; +/* Byte 3 Bit 7: BT2020_RGB */ +if (db[2 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_RGB ; +/* Byte 4 Bit 7: DCI-P3 */ +if (db[3 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_DCI_P3 ; + +DRM_DEBUG_KMS ("Supported Colorimetry 0x%x\n" , info->colorimetry); +} +static bool cea_db_is_hdmi_hdr_metadata_block (const u8 *db) {if (cea_db_tag (db) !=USE_EXTENDED_TAG )@@ -4877,6 +4929,8 @@ static void drm_parse_cea_ext(struct drm_connector *connector,drm_parse_vcdb (connector, db);if (cea_db_is_hdmi_hdr_metadata_block (db))drm_parse_hdr_metadata_block (connector, db); +if (cea_db_is_hdmi_colorimetry_data_block (db)) +drm_parse_colorimetry_data_block (connector, db); } }include/drm/drm_connector.h +3
-0@@ -207,6 +207,9 @@ struct drm_hdmi_info {/** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + +/* @colorimetry: bitmap of supported colorimetry modes */ +u16 colorimetry; };/** include/drm/drm_edid.h +11
-0@@ -224,6 +224,17 @@ struct detailed_timing { DRM_EDID_YCBCR420_DC_36 | \ DRM_EDID_YCBCR420_DC_30) +/* Supported Colorimetry from colorimetry data block */ +#define DRM_EDID_CLRMETRY_xvYCC_601 (1 << 0) +#define DRM_EDID_CLRMETRY_xvYCC_709 (1 << 1) +#define DRM_EDID_CLRMETRY_sYCC_601 (1 << 2) +#define DRM_EDID_CLRMETRY_ADBYCC_601 (1 << 3) +#define DRM_EDID_CLRMETRY_ADB_RGB (1 << 4) +#define DRM_EDID_CLRMETRY_BT2020_CYCC (1 << 5) +#define DRM_EDID_CLRMETRY_BT2020_YCC (1 << 6) +#define DRM_EDID_CLRMETRY_BT2020_RGB (1 << 7) +#define DRM_EDID_CLRMETRY_DCI_P3 (1 << 15) +/* ELD Header Block */ #define DRM_ELD_HEADER_BLOCK_SIZE 4Signature · 6 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project _______________________________________________ dri-devel mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/dri-devel
Signature · 2 lines
Ville Syrjälä Intel
Hi Ville
Quoted 8 lines · Ville Syrjälä
Quoted 5 lines · Abhinav Kumar
From: Uma Shankar <[email protected]>
CEA 861.3 spec adds colorimetry data block for HDMI. Parsing the block to get the colorimetry data from panel.
Why?
[Abhinav] The display driver for MSM chipsets still replies on the drm_edid.c for the parsing of CEA extension blocks. Primarily we are using this information to know the supported colorspaces of the sink (BT2020/DCI-P3) for use-cases such as HDR. The parts of the MSM display driver which use this block shall be posted upstream a little bit later when our changes are ready to be posted.
Hence we would like drm_edid.c to be capable of parsing this block.
Thanks.
Quoted 136 lines
Quoted 136 lines
This was posted by Uma Shankar at
https://patchwork.kernel.org/patch/10861327/Modified by Abhinav Kumar:
- Use macros to distinguish the bit fields for claritySigned-off-by Uma Shankar <[email protected]>Signed-off-by Abhinav Kumar <[email protected]>--- drivers/gpu/drm/drm_edid.c | 54 +++++++++++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 3 +++ include/drm/drm_edid.h | 11 +++++++++ 3 files changed, 68 insertions(+)drivers/gpu/drm/drm_edid.c +1
-0@@ -3136,6 +3136,7 @@ static int drm_cvt_modes(struct drm_connector *connector,#define VIDEO_BLOCK 0x02#define VENDOR_BLOCK 0x03#define SPEAKER_BLOCK 0x04 +#define COLORIMETRY_DATA_BLOCK 0x5#define HDR_STATIC_METADATA_BLOCK 0x6#define USE_EXTENDED_TAG 0x07#define
EXT_VIDEO_CAPABILITY_BLOCK0x00drivers/gpu/drm/drm_edid.c +51
-0@@ -4199,6 +4200,57 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) mode->clock = clock; } +static bool cea_db_is_hdmi_colorimetry_data_block (const u8 *db) +{ +if (cea_db_tag (db) !=USE_EXTENDED_TAG ) +return false; + +if (db[1 ] !=COLORIMETRY_DATA_BLOCK ) +return false; + +if (cea_db_payload_len (db) <2 ) +return false; + +return true; +} + +static void +drm_parse_colorimetry_data_block (struct drm_connector *connector,const u8 *db) +{ +struct drm_hdmi_info *info = &connector->display_info.hdmi; + +/* As per CEA 861-G spec */ +/* Byte 3 Bit 0: xvYCC_601 */ +if (db[2 ] &BIT (0 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_601; +/* Byte 3 Bit 1: xvYCC_709 */ +if (db[2 ] &BIT (1 )) + info->colorimetry |= DRM_EDID_CLRMETRY_xvYCC_709; +/* Byte 3 Bit 2: sYCC_601 */ +if (db[2 ] &BIT (2 )) + info->colorimetry |= DRM_EDID_CLRMETRY_sYCC_601; +/* Byte 3 Bit 3: ADBYCC_601 */ +if (db[2 ] &BIT (3 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADBYCC_601 ; +/* Byte 3 Bit 4: ADB_RGB */ +if (db[2 ] &BIT (4 )) + info->colorimetry |=DRM_EDID_CLRMETRY_ADB_RGB ; +/* Byte 3 Bit 5: BT2020_CYCC */ +if (db[2 ] &BIT (5 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_CYCC ; +/* Byte 3 Bit 6: BT2020_YCC */ +if (db[2 ] &BIT (6 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_YCC ; +/* Byte 3 Bit 7: BT2020_RGB */ +if (db[2 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_BT2020_RGB ; +/* Byte 4 Bit 7: DCI-P3 */ +if (db[3 ] &BIT (7 )) + info->colorimetry |=DRM_EDID_CLRMETRY_DCI_P3 ; + +DRM_DEBUG_KMS ("Supported Colorimetry 0x%x\n" , info->colorimetry); +} +static bool cea_db_is_hdmi_hdr_metadata_block (const u8 *db){
drivers/gpu/drm/drm_edid.c +2
-0if (cea_db_tag (db) !=USE_EXTENDED_TAG )@@ -4877,6 +4929,8 @@ static void drm_parse_cea_ext(structdrm_connector *connector,drm_parse_vcdb (connector ,db );if (cea_db_is_hdmi_hdr_metadata_block (db))drm_parse_hdr_metadata_block (connector, db); +if (cea_db_is_hdmi_colorimetry_data_block (db)) +drm_parse_colorimetry_data_block (connector, db); } }include/drm/drm_connector.h +3
-0@@ -207,6 +207,9 @@ struct drm_hdmi_info {/** @y420_dc_modes: bitmap of deep color support index */ u8 y420_dc_modes; + +/* @colorimetry: bitmap of supported colorimetry modes */ +u16 colorimetry; };/** include/drm/drm_edid.h +11
-0@@ -224,6 +224,17 @@ struct detailed_timing { DRM_EDID_YCBCR420_DC_36 | \ DRM_EDID_YCBCR420_DC_30) +/* Supported Colorimetry from colorimetry data block */ +#define DRM_EDID_CLRMETRY_xvYCC_601 (1 << 0) +#define DRM_EDID_CLRMETRY_xvYCC_709 (1 << 1) +#define DRM_EDID_CLRMETRY_sYCC_601 (1 << 2) +#define DRM_EDID_CLRMETRY_ADBYCC_601 (1 << 3) +#define DRM_EDID_CLRMETRY_ADB_RGB (1 << 4) +#define DRM_EDID_CLRMETRY_BT2020_CYCC (1 << 5) +#define DRM_EDID_CLRMETRY_BT2020_YCC (1 << 6) +#define DRM_EDID_CLRMETRY_BT2020_RGB (1 << 7) +#define DRM_EDID_CLRMETRY_DCI_P3 (1 << 15) +/* ELD Header Block */ #define DRM_ELD_HEADER_BLOCK_SIZE 4
Quoted 7 lines
Quoted 7 lines
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
_______________________________________________
dri-devel mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoting Abhinav Kumar (2020-01-23 14:40:45)
Quoted 20 lines
drivers/gpu/drm/drm_edid.c +12
-0@@ -4199,6 +4200,57 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) mode->clock = clock; } +static bool cea_db_is_hdmi_colorimetry_data_block (const u8 *db) +{ +if (cea_db_tag (db) !=USE_EXTENDED_TAG ) +return false; + +if (db[1 ] !=COLORIMETRY_DATA_BLOCK ) +return false; + +if (cea_db_payload_len (db) <2 ) +return false; + +return true;
drivers/gpu/drm/drm_edid.c static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) · line 4224
Quoted 10 lines
drivers/gpu/drm/drm_edid.c +10
-0+} + +static void +drm_parse_colorimetry_data_block (struct drm_connector *connector,const u8 *db) +{ +struct drm_hdmi_info *info = &connector->display_info.hdmi; + +/* As per CEA 861-G spec */ +/* Byte 3 Bit 0: xvYCC_601 */ +if (db[2 ] &BIT (0 ))
Why not use the defines added in drm_edid.h in this patch? Then the comments can be removed because the code would look like
if (db[2] & DRM_EDID_CLRMETRY_xvYCC_601)
Hi Stephen
Quoted 37 lines · Stephen Boyd
Quoting Abhinav Kumar (2020-01-23 14:40:45)
Quoted 22 lines
drivers/gpu/drm/drm_edid.c +13
-0@@ -4199,6 +4200,57 @@ static void fixup_detailed_cea_mode_clock(struct drm_display_mode *mode) mode->clock = clock; } +static bool cea_db_is_hdmi_colorimetry_data_block (const u8 *db) +{ +if (cea_db_tag (db) !=USE_EXTENDED_TAG ) +return false; + +if (db[1 ] !=COLORIMETRY_DATA_BLOCK ) +return false; + +if (cea_db_payload_len (db) <2 ) +return false; + +return true; +}drivers/gpu/drm/drm_edid.c static void · line 4226
Quoted 10 lines
drivers/gpu/drm/drm_edid.c +9
-0+ +static void +drm_parse_colorimetry_data_block (struct drm_connector *connector,const u8 *db) +{ +struct drm_hdmi_info *info = &connector->display_info.hdmi; + +/* As per CEA 861-G spec */ +/* Byte 3 Bit 0: xvYCC_601 */ +if (db[2 ] &BIT (0 ))Why not use the defines added in
drm_edid.hin this patch? Then the comments can be removed because the code would look like
Quoted 1 line
if (db[2] & DRM_EDID_CLRMETRY_xvYCC_601)
[Abhinav] Sure, will make the change and upload a v2