Skip to contentSkip to conversation

Add Cortina Access basic DM drivers

PATCH New Alex Nemirovsky 2 participants 14 messages Jan 30, 2020 – Feb 8, 2020

Subsystems (5)
lore
Share & tools
lore
#0 lore raw

v4 cover Add Cortina Access basic DM drivers

Cortina Access management has decided that we want to add formal upstream support of u-boot going forward for our line of SoCs and evaluation boards.

Our line of SoC’s all begin with the “CA” designation followed by 4 digits. i.e. CAxxxx. The CAxxxx series supports both ARM and MIPS ISA based custom cores.

All our drivers have cross platform support for both CPU ISAs. They will be placed in the normal drivers tree in u-boot.

In addition, our SoCs and development boards share common Cortina specific features which are not driver related. Those changes will be maintained in board/cortina/common. While specific development boards will be in board/cortina/board_name.

We would like to have a git-mailrc alias of "cortina" to allow us to better maintain and support our boards and common features found in the board/cortina subtree.

Changes in v4:
- clean up presidio_asic.h per trini recommendations
- use autogen savedefconfig instead of manual maintained file

Changes in v3:
- Remove CA ARM and MIPS common subdirectories from board/cortina/common after further discussions with trini
- clean up comment blocks
- fix rmw of baud rate bitfield change
- fixed dts closing bracket indentation
- presidio.h: remove deadcode from presidio.h
- presidio.h: remove CA_REG_READ/CA_REG_WRITE wrapper macros
- presidio.h: remove CA77xx define replace use CA common Kconfig SoC selection instead
- select SOC_CA7774 via board's Kconfig
- select BIT64 via board's Kconfig instead of presidio.h

Changes in v2:
- Modified filepath for CA ARM and MIPS per trini's recommendation
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove Authorship as it is already recorded within Git and is redundant
- Replace printf() as debug()
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove authorship comment as it is already recorded within Git and is redundant
- Use setbits_32() for read-modify-write operation.
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove authorship comment as it is already recorded within Git and is redundant
- Merge serial_cortina.h reg defines into serial_cortina.c
- Modify ca_serial_pending() and API to get resource.

Alex Nemirovsky (2):
MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access
Inc.
board: presidio-asic: Add basic G3 engr. development board support

Jason Li (4):
gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCs
gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCs
watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs
serial: serial_cortina: add UART DM driver for CAxxxx SoCs

 MAINTAINERS                                  |  16 +++
 arch/arm/Kconfig                             |   5 +
 arch/arm/dts/Makefile                        |   2 +
 arch/arm/dts/ca-presidio-engboard.dts        |  69 +++++++++++
 arch/arm/include/asm/gpio.h                  |   2 +-
 arch/arm/mach-cortina/Makefile               |   5 +
 board/cortina/common/Kconfig                 |   6 +
 board/cortina/presidio-asic/Kconfig          |  18 +++
 board/cortina/presidio-asic/MAINTAINERS      |   6 +
 board/cortina/presidio-asic/Makefile         |   8 ++
 board/cortina/presidio-asic/lowlevel_init.S  |  87 ++++++++++++++
 board/cortina/presidio-asic/presidio.c       | 134 ++++++++++++++++++++++
 configs/cortina_presidio-asic-base_defconfig |  29 +++++
 doc/git-mailrc                               |   2 +
 drivers/gpio/Kconfig                         |   8 ++
 drivers/gpio/Makefile                        |   1 +
 drivers/gpio/cortina_gpio.c                  | 111 ++++++++++++++++++
 drivers/serial/Kconfig                       |   7 ++
 drivers/serial/Makefile                      |   2 +-
 drivers/serial/serial_cortina.c              | 164 +++++++++++++++++++++++++++
 drivers/watchdog/Kconfig                     |   8 ++
 drivers/watchdog/Makefile                    |   1 +
 drivers/watchdog/cortina_wdt.c               | 138 ++++++++++++++++++++++
 include/configs/presidio_asic.h              |  75 ++++++++++++
 24 files changed, 902 insertions(+), 2 deletions(-)
 create mode 100644 arch/arm/dts/ca-presidio-engboard.dts
 create mode 100644 arch/arm/mach-cortina/Makefile
 create mode 100644 board/cortina/common/Kconfig
 create mode 100644 board/cortina/presidio-asic/Kconfig
 create mode 100644 board/cortina/presidio-asic/MAINTAINERS
 create mode 100644 board/cortina/presidio-asic/Makefile
 create mode 100644 board/cortina/presidio-asic/lowlevel_init.S
 create mode 100644 board/cortina/presidio-asic/presidio.c
 create mode 100644 configs/cortina_presidio-asic-base_defconfig
 create mode 100644 drivers/gpio/cortina_gpio.c
 create mode 100644 drivers/serial/serial_cortina.c
 create mode 100644 drivers/watchdog/cortina_wdt.c
 create mode 100644 include/configs/presidio_asic.h
Signature · 1 line
2.7.4
#1 lore raw

PATCH v4 1/6 MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.

Assign Alex Nemirovsky as custodian for all
Cortina Access (CA) for ARM and MIPS based SoCs.

Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures.

---

Changes in v4: None
Changes in v3:
- Remove CA ARM and MIPS common subdirectories from board/cortina/common after further discussions with trini

Changes in v2:
- Modified filepath for CA ARM and MIPS per trini's recommendation

 MAINTAINERS                  | 16 ++++++++++++++++
 board/cortina/common/Kconfig |  6 ++++++
 doc/git-mailrc               |  2 ++
 3 files changed, 24 insertions(+)
 create mode 100644 board/cortina/common/Kconfig
MAINTAINERS +16 -0
index 438fb22..2a5f41d 100644
@@ -173,6 +173,14 @@ F:	doc/README.bcm7xxx
 F:	drivers/mmc/bcmstb_sdhci.c
 F:	drivers/spi/bcmstb_spi.c
 
+ARM CORTINA ACCESS CAxxxx
+M:	Alex Nemirovsky <[email protected]>
+S:	Supported
+F:	board/cortina/common/
+F:	drivers/gpio/cortina_gpio.c
+F:	drivers/watchdog/cortina_wdt.c
+F:	drivers/serial/serial_cortina.c
+
 ARM/CZ.NIC TURRIS MOX SUPPORT
 M:	Marek Behun <[email protected]>
 S:	Maintained
@@ -647,6 +655,14 @@ S:	Maintained
 T:	git https://gitlab.denx.de/u-boot/custodians/u-boot-mips.git
 F:	arch/mips/
 
+MIPS CORTINA ACCESS CAxxxx
+M:	Alex Nemirovsky <[email protected]>
+S:	Supported
+F:	board/cortina/common/
+F:	drivers/gpio/cortina_gpio.c
+F:	drivers/watchdog/cortina_wdt.c
+F:	drivers/serial/serial_cortina.c
+
 MIPS MSCC
 M:	Gregory CLEMENT <[email protected]>
 M:	Lars Povlsen <[email protected]>
board/cortina/common/Kconfig new file +6 -0
new file mode 100644
index 0000000..00c709e
@@ -0,0 +1,6 @@
+config CORTINA_PLATFORM
+       bool "Cortina-Access Platform"
+       default y
+       help
+         Select this option for Cortina-Access platforms
+	 to enables selection of CAxxxx drivers
doc/git-mailrc +2 -0
index d29416a..33d1814 100644
@@ -15,6 +15,7 @@ alias abrodkin       Alexey Brodkin <[email protected]>
 alias afleming       Andy Fleming <[email protected]>
 alias ag             Anatolij Gustschin <[email protected]>
 alias agraf          Alexander Graf <[email protected]>
+alias alexnemirovsky Alex Nemirovsky <[email protected]>
 alias alisonwang     Alison Wang <[email protected]>
 alias angelo_ts      Angelo Dureghello <[email protected]>
 alias bmeng          Bin Meng <[email protected]>
@@ -56,6 +57,7 @@ alias arc            uboot, abrodkin
 
 alias arm            uboot, trini
 alias at91           uboot, abiessmann
+alias cortina        uboot, alexnemirovsky
 alias davinci        ti
 alias imx            uboot, sbabic
 alias kirkwood       uboot, stroese
Signature · 1 line
2.7.4
#2 lore raw

PATCH v4 1/6 MAINTAINERS, git-mailrc: cortina: add Custodian for Cortina Access Inc.

Quoted 9 lines · Alex Nemirovsky

Assign Alex Nemirovsky as custodian for all
Cortina Access (CA) for ARM and MIPS based SoCs.

Currently Cortina Access CAxxxx family of SoCs support both ARM and MIPS ISA. Drivers have cross platform support for both architectures.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/666703b1/attachment.sig>
#3 lore raw

PATCH v4 2/6 gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCs

In reply to Alex Nemirovsky

From: Jason Li <[email protected]>

The Cortina CAxxxx GPIO driver maintains DM_GPIO support across different CPU ISA in the CAxxxx Soc Family; Not just ARM. Therefore, it is not desirable to split out and maintain separete gpio header file for each CPU architecture.

---

Changes in v4: None
Changes in v3: None
Changes in v2: None

 arch/arm/include/asm/gpio.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/include/asm/gpio.h +1 -1
index 6ff5f42..10af1e1 100644
@@ -3,7 +3,7 @@
 	!defined(CONFIG_ARCH_BCM63158) && !defined(CONFIG_ARCH_ROCKCHIP) && \
 	!defined(CONFIG_ARCH_LX2160A) && !defined(CONFIG_ARCH_LS1028A) && \
 	!defined(CONFIG_ARCH_LS2080A) && !defined(CONFIG_ARCH_LS1088A) && \
-	!defined(CONFIG_ARCH_ASPEED)
+	!defined(CONFIG_ARCH_ASPEED) && !defined(CONFIG_CORTINA_PLATFORM)
 #include <asm/arch/gpio.h>
 #endif
 #include <asm-generic/gpio.h>
Signature · 1 line
2.7.4
#4 lore raw

PATCH v4 2/6 gpio: do not include <asm/arch/gpio.h> for Cortina CAxxxx SoCs

Quoted 10 lines · Alex Nemirovsky

From: Jason Li <[email protected]>

The Cortina CAxxxx GPIO driver maintains DM_GPIO support across different CPU ISA in the CAxxxx Soc Family; Not just ARM. Therefore, it is not desirable to split out and maintain separete gpio header file for each CPU architecture.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/0f417b53/attachment.sig>
#5 lore raw

PATCH v4 3/6 gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCs

In reply to Alex Nemirovsky

From: Jason Li <[email protected]>

DM_GPIO based GPIO controller driver for CAxxxx SoCs. This driver support multiple CPU architectures and Cortina Access SoC platforms.

---

Changes in v4: None
Changes in v3: None
Changes in v2:
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove Authorship as it is already recorded within Git and is redundant
- Replace printf() as debug()

 drivers/gpio/Kconfig        |   8 ++++
 drivers/gpio/Makefile       |   1 +
 drivers/gpio/cortina_gpio.c | 111 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 120 insertions(+)
 create mode 100644 drivers/gpio/cortina_gpio.c
drivers/gpio/Kconfig +8 -0
index 1de6f52..8a7aa5a 100644
@@ -59,6 +59,14 @@ config BCM6345_GPIO
 	help
 	  This driver supports the GPIO banks on BCM6345 SoCs.
 
+config CORTINA_GPIO
+	bool "Cortina-Access GPIO driver"
+	depends on DM_GPIO && CORTINA_PLATFORM
+	help
+	  Enable support for the GPIO controller in Cortina CAxxxx SoCs.
+	  This driver supports all CPU ISA variants supported by Cortina
+	  Access CAxxxx SoCs.
+
 config DWAPB_GPIO
 	bool "DWAPB GPIO driver"
 	depends on DM && DM_GPIO
drivers/gpio/Makefile +1 -0
index 449046b..ceae612 100644
@@ -17,6 +17,7 @@ endif
 obj-$(CONFIG_AT91_GPIO)	+= at91_gpio.o
 obj-$(CONFIG_ATMEL_PIO4)	+= atmel_pio4.o
 obj-$(CONFIG_BCM6345_GPIO)	+= bcm6345_gpio.o
+obj-$(CONFIG_CORTINA_GPIO)      += cortina_gpio.o
 obj-$(CONFIG_INTEL_GPIO)	+= intel_gpio.o
 obj-$(CONFIG_INTEL_ICH6_GPIO)	+= intel_ich6_gpio.o
 obj-$(CONFIG_INTEL_BROADWELL_GPIO)	+= intel_broadwell_gpio.o
drivers/gpio/cortina_gpio.c new file +111 -0

111 lines not on this page · raw message

Signature · 1 line
2.7.4
#6 lore raw

PATCH v4 3/6 gpio: cortina_gpio: add DM_GPIO driver for CAxxxx SoCs

Quoted 9 lines · Alex Nemirovsky

From: Jason Li <[email protected]>

DM_GPIO based GPIO controller driver for CAxxxx SoCs. This driver support multiple CPU architectures and Cortina Access SoC platforms.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/b0d2bc85/attachment.sig>
#7 lore raw

PATCH v4 4/6 watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs

In reply to Alex Nemirovsky

From: Jason Li <[email protected]>

Add support for hardware watchdog timer on all Cortina Access CAxxxx family of SoCs.

---

Changes in v4: None
Changes in v3: None
Changes in v2:
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove authorship comment as it is already recorded within Git and is redundant
- Use setbits_32() for read-modify-write operation.

 drivers/watchdog/Kconfig       |   8 +++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/cortina_wdt.c | 138 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 147 insertions(+)
 create mode 100644 drivers/watchdog/cortina_wdt.c
drivers/watchdog/Kconfig +8 -0
index 8c16d69..2f7dedb 100644
@@ -99,6 +99,14 @@ config WDT_CDNS
 	   Select this to enable Cadence watchdog timer, which can be found on some
 	   Xilinx Microzed Platform.
 
+config WDT_CORTINA
+	bool "Cortina Access CAxxxx watchdog timer support"
+	depends on WDT
+	help
+	  Cortina Access CAxxxx watchdog timer support.
+	  This driver support all CPU ISAs supported by Cortina
+          Access CAxxxx SoCs.
+
 config WDT_MPC8xx
 	bool "MPC8xx watchdog timer support"
 	depends on WDT && MPC8xx
drivers/watchdog/Makefile +1 -0
index 955caef..87f92a4 100644
@@ -20,6 +20,7 @@ obj-$(CONFIG_WDT_SANDBOX) += sandbox_wdt.o
 obj-$(CONFIG_WDT_ARMADA_37XX) += armada-37xx-wdt.o
 obj-$(CONFIG_WDT_ASPEED) += ast_wdt.o
 obj-$(CONFIG_WDT_BCM6345) += bcm6345_wdt.o
+obj-$(CONFIG_WDT_CORTINA) += cortina_wdt.o
 obj-$(CONFIG_WDT_ORION) += orion_wdt.o
 obj-$(CONFIG_WDT_CDNS) += cdns_wdt.o
 obj-$(CONFIG_WDT_MPC8xx) += mpc8xx_wdt.o
drivers/watchdog/cortina_wdt.c new file +138 -0

138 lines not on this page · raw message

Signature · 1 line
2.7.4
#8 lore raw

PATCH v4 4/6 watchdog: cortina_wdt: add support for HW WDT on CAxxxx SoCs

Quoted 9 lines · Alex Nemirovsky

From: Jason Li <[email protected]>

Add support for hardware watchdog timer on all Cortina Access CAxxxx family of SoCs.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/3059ea58/attachment.sig>
#9 lore raw

PATCH v4 5/6 serial: serial_cortina: add UART DM driver for CAxxxx SoCs

In reply to Alex Nemirovsky

From: Jason Li <[email protected]>

Add serial UART driver support for all Cortina Access CAxxxx family of SoCs.

---

Changes in v4: None
Changes in v3:
- clean up comment blocks
- fix rmw of baud rate bitfield change

Changes in v2:
- Rename driver in DT namespace for consistency between all CA drivers.
- Remove blank line after SPDX identifier
- Remove authorship comment as it is already recorded within Git and is redundant
- Merge serial_cortina.h reg defines into serial_cortina.c
- Modify ca_serial_pending() and API to get resource.

 drivers/serial/Kconfig          |   7 ++
 drivers/serial/Makefile         |   2 +-
 drivers/serial/serial_cortina.c | 164 ++++++++++++++++++++++++++++++++++++++++
 3 files changed, 172 insertions(+), 1 deletion(-)
 create mode 100644 drivers/serial/serial_cortina.c
drivers/serial/Kconfig +7 -0
index ece7d87..9f76596 100644
@@ -539,6 +539,13 @@ config BCM6345_SERIAL
 	help
 	  Select this to enable UART on BCM6345 SoCs.
 
+config CORTINA_UART
+	bool "Cortina UART support"
+	depends on DM_SERIAL
+	help
+	  Select this to enable UART support for Cortina-Access UART devices
+	  found on CAxxxx SoCs.
+
 config FSL_LINFLEXUART
 	bool "Freescale Linflex UART support"
 	depends on DM_SERIAL
drivers/serial/Makefile +1 -1
index 06ee306..c8f2db4 100644
@@ -28,13 +28,13 @@ obj-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
 obj-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 obj-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
 endif
-
 obj-$(CONFIG_ALTERA_UART) += altera_uart.o
 obj-$(CONFIG_ALTERA_JTAG_UART) += altera_jtag_uart.o
 obj-$(CONFIG_AR933X_UART) += serial_ar933x.o
 obj-$(CONFIG_ARM_DCC) += arm_dcc.o
 obj-$(CONFIG_ATMEL_USART) += atmel_usart.o
 obj-$(CONFIG_BCM6345_SERIAL) += serial_bcm6345.o
+obj-$(CONFIG_CORTINA_UART) += serial_cortina.o
 obj-$(CONFIG_EFI_APP) += serial_efi.o
 obj-$(CONFIG_LPC32XX_HSUART) += lpc32xx_hsuart.o
 obj-$(CONFIG_MCFUART) += mcfuart.o
drivers/serial/serial_cortina.c new file +164 -0

164 lines not on this page · raw message

Signature · 1 line
2.7.4
#10 lore raw

PATCH v4 5/6 serial: serial_cortina: add UART DM driver for CAxxxx SoCs

Quoted 8 lines · Alex Nemirovsky

From: Jason Li <[email protected]>

Add serial UART driver support for all Cortina Access CAxxxx family of SoCs.

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/757bc776/attachment.sig>
#11 lore raw

PATCH v4 6/6 board: presidio-asic: Add basic G3 engr. development board support

In reply to Alex Nemirovsky

Add basic Presidio G3 engineering board support

---

Changes in v4:
- clean up presidio_asic.h per trini recommendations
- use autogen savedefconfig instead of manual maintained file

Changes in v3:
- fixed dts closing bracket indentation
- presidio.h: remove deadcode from presidio.h
- presidio.h: remove CA_REG_READ/CA_REG_WRITE wrapper macros
- presidio.h: remove CA77xx define replace use CA common Kconfig SoC selection instead
- select SOC_CA7774 via board's Kconfig
- select BIT64 via board's Kconfig instead of presidio.h

Changes in v2: None

 arch/arm/Kconfig                             |   5 +
 arch/arm/dts/Makefile                        |   2 +
 arch/arm/dts/ca-presidio-engboard.dts        |  69 ++++++++++++++
 arch/arm/mach-cortina/Makefile               |   5 +
 board/cortina/presidio-asic/Kconfig          |  18 ++++
 board/cortina/presidio-asic/MAINTAINERS      |   6 ++
 board/cortina/presidio-asic/Makefile         |   8 ++
 board/cortina/presidio-asic/lowlevel_init.S  |  87 +++++++++++++++++
 board/cortina/presidio-asic/presidio.c       | 134 +++++++++++++++++++++++++++
 configs/cortina_presidio-asic-base_defconfig |  29 ++++++
 include/configs/presidio_asic.h              |  75 +++++++++++++++
 11 files changed, 438 insertions(+)
 create mode 100644 arch/arm/dts/ca-presidio-engboard.dts
 create mode 100644 arch/arm/mach-cortina/Makefile
 create mode 100644 board/cortina/presidio-asic/Kconfig
 create mode 100644 board/cortina/presidio-asic/MAINTAINERS
 create mode 100644 board/cortina/presidio-asic/Makefile
 create mode 100644 board/cortina/presidio-asic/lowlevel_init.S
 create mode 100644 board/cortina/presidio-asic/presidio.c
 create mode 100644 configs/cortina_presidio-asic-base_defconfig
 create mode 100644 include/configs/presidio_asic.h
arch/arm/Kconfig +5 -0
index 36c9c2f..6d95cde 100644
@@ -1638,6 +1638,10 @@ config TARGET_DURIAN
 	  Support for durian platform.
 	  It has 2GB Sdram, uart and pcie.
 
+config TARGET_PRESIDIO_ASIC
+	bool "Support Cortina Presidio ASIC Platform"
+	select ARM64
+
 endchoice
 
 config ARCH_SUPPORT_TFABOOT
@@ -1782,6 +1786,7 @@ source "board/Marvell/gplugd/Kconfig"
 source "board/armadeus/apf27/Kconfig"
 source "board/armltd/vexpress/Kconfig"
 source "board/armltd/vexpress64/Kconfig"
+source "board/cortina/presidio-asic/Kconfig"
 source "board/broadcom/bcm23550_w1d/Kconfig"
 source "board/broadcom/bcm28155_ap/Kconfig"
 source "board/broadcom/bcm963158/Kconfig"
arch/arm/dts/Makefile +2 -0
index 0127a91..81db1e6 100644
@@ -849,6 +849,8 @@ dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
 
 dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb
 
+dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
+
 targets += $(dtb-y)
 
 # Add any required device tree compiler flags here
arch/arm/dts/ca-presidio-engboard.dts new file +69 -0

69 lines not on this page · raw message

arch/arm/mach-cortina/Makefile new file +5 -0
new file mode 100644
index 0000000..ffb8692
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 Cortina Access Inc.
+#
+obj-y += lowlevel_init.o
board/cortina/presidio-asic/Kconfig new file +18 -0
new file mode 100644
index 0000000..8e6f6cf
@@ -0,0 +1,18 @@
+if TARGET_PRESIDIO_ASIC
+config BIT64
+       bool
+       default y
+
+select SOC_CA7774
+
+config SYS_BOARD
+	default "presidio-asic"
+
+config SYS_VENDOR
+	default "cortina"
+
+config SYS_CONFIG_NAME
+	default "presidio_asic"
+
+source "board/cortina/common/Kconfig"
+endif
board/cortina/presidio-asic/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..9db17bd
@@ -0,0 +1,6 @@
+Cortina Presidio ASIC G3 Engineering BOARD
+M:	Alex Nemirovsky <[email protected]>
+S:	Supported
+F:	board/cortina/presidio-asic/
+F:	include/configs/presidio_asic.h
+F:	configs/cortina_presidio-asic*defconfig
board/cortina/presidio-asic/Makefile new file +8 -0
new file mode 100644
index 0000000..d167a15
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# (C) Copyright 2020 Cortina-Access.Inc.
+#
+#
+
+obj-y	:= presidio.o
+obj-y	+= lowlevel_init.o
board/cortina/presidio-asic/lowlevel_init.S new file +87 -0

87 lines not on this page · raw message

board/cortina/presidio-asic/presidio.c new file +134 -0

134 lines not on this page · raw message

configs/cortina_presidio-asic-base_defconfig new file +29 -0
new file mode 100644
index 0000000..ec64bd2
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_DM_GPIO=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0"
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
include/configs/presidio_asic.h new file +75 -0

75 lines not on this page · raw message

Signature · 1 line
2.7.4
#12 lore raw

PATCH v4 6/6 board: presidio-asic: Add basic G3 engr. development board support

Hello Tom and Daniel,

This v4 of patch 6/6 in the series is the only one which yield feedback in the prior v3. All other are in “Reviewed-By” state. We hope that v4 sent out a week ago has addressed those issues.

Let us know if there is anything else holding up the series acceptance.

BR
-AN

Quoted 569 lines · Alex Nemirovsky

Add basic Presidio G3 engineering board support

---

Changes in v4:
- clean up presidio_asic.h per trini recommendations
- use autogen savedefconfig instead of manual maintained file

Changes in v3:
- fixed dts closing bracket indentation
- presidio.h: remove deadcode from presidio.h
- presidio.h: remove CA_REG_READ/CA_REG_WRITE wrapper macros
- presidio.h: remove CA77xx define replace use CA common Kconfig SoC selection instead
- select SOC_CA7774 via board's Kconfig
- select BIT64 via board's Kconfig instead of presidio.h

Changes in v2: None

arch/arm/Kconfig                             |   5 +
arch/arm/dts/Makefile                        |   2 +
arch/arm/dts/ca-presidio-engboard.dts        |  69 ++++++++++++++
arch/arm/mach-cortina/Makefile               |   5 +
board/cortina/presidio-asic/Kconfig          |  18 ++++
board/cortina/presidio-asic/MAINTAINERS      |   6 ++
board/cortina/presidio-asic/Makefile         |   8 ++
board/cortina/presidio-asic/lowlevel_init.S  |  87 +++++++++++++++++
board/cortina/presidio-asic/presidio.c       | 134 +++++++++++++++++++++++++++
configs/cortina_presidio-asic-base_defconfig |  29 ++++++
include/configs/presidio_asic.h              |  75 +++++++++++++++
11 files changed, 438 insertions(+)

create mode 100644 arch/arm/dts/ca-presidio-engboard.dts create mode 100644 arch/arm/mach-cortina/Makefile create mode 100644 board/cortina/presidio-asic/Kconfig create mode 100644 board/cortina/presidio-asic/MAINTAINERS create mode 100644 board/cortina/presidio-asic/Makefile create mode 100644 board/cortina/presidio-asic/lowlevel_init.S create mode 100644 board/cortina/presidio-asic/presidio.c create mode 100644 configs/cortina_presidio-asic-base_defconfig create mode 100644 include/configs/presidio_asic.h

arch/arm/Kconfig +4 -0
index 36c9c2f..6d95cde 100644
@@ -1638,6 +1638,10 @@ config TARGET_DURIAN
 	  Support for durian platform.
 	  It has 2GB Sdram, uart and pcie.
 
+config TARGET_PRESIDIO_ASIC
+	bool "Support Cortina Presidio ASIC Platform"
+	select ARM64
+

endchoice

config ARCH_SUPPORT_TFABOOT

arch/arm/Kconfig +0 -0
@@ -1782,6 +1786,7 @@ source "board/Marvell/gplugd/Kconfig"

source "board/armadeus/apf27/Kconfig"
source "board/armltd/vexpress/Kconfig"
source "board/armltd/vexpress64/Kconfig"
+source "board/cortina/presidio-asic/Kconfig"
source "board/broadcom/bcm23550_w1d/Kconfig"
source "board/broadcom/bcm28155_ap/Kconfig"
source "board/broadcom/bcm963158/Kconfig"

arch/arm/dts/Makefile +0 -0
index 0127a91..81db1e6 100644
@@ -849,6 +849,8 @@ dtb-$(CONFIG_TARGET_VEXPRESS_CA15_TC2) += vexpress-v2p-ca15_a7.dtb
 

dtb-$(CONFIG_TARGET_DURIAN) += phytium-durian.dtb

arch/arm/dts/Makefile +2 -0
+dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
+

targets += $(dtb-y)

# Add any required device tree compiler flags here

arch/arm/dts/ca-presidio-engboard.dts new file +69 -0
new file mode 100644
index 0000000..c03dacc
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2020, Cortina Access Inc.
+ */
+
+/dts-v1/;
+
+/ {
+   #address-cells = <2>;
+   #size-cells = <1>;
+
+	mmc0: mmc at f4400000 {
+		compatible = "snps,dw-cortina";
+		reg = <0x0 0xf4400000 0x1000>;
+		bus-width = <4>;
+		io_ds = <0x77>;
+		fifo-mode;
+		sd_dll_ctrl = <0xf43200e8>;
+		io_drv_ctrl = <0xf432004c>;
+	};
+
+	gpio0: gpio-controller at 0xf4329280  {
+		compatible = "cortina,ca-gpio";
+		reg = <0x0 0xf4329280 0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "okay";
+	};
+	gpio1: gpio-controller at 0xf43292a4  {
+		compatible = "cortina,ca-gpio";
+		reg = <0x0 0xf43292a4 0x24>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		status = "disabled";
+	};
+
+	watchdog: watchdog at 0xf432901c {
+		compatible = "cortina,ca-wdt";
+		reg = <0x0 0xf432901c 0x34>,
+		      <0x0 0xf4320020 0x04>;
+		status = "okay";
+	};
+
+	uart0: serial at 0xf4329148  {
+		u-boot,dm-pre-reloc;
+		compatible = "cortina,ca-uart";
+		reg = <0x0 0xf4329148 0x30>;
+		status = "okay";
+	};
+
+	i2c: i2c at f4329120 {
+		compatible = "cortina,ca-i2c";
+		reg = <0x0 0xf4329120 0x28>;
+		clock-frequency = <400000>;
+	};
+
+	sflash: sflash-controller at f4324000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "cortina,ca-sflash";
+		reg = <0x0 0xf4324000 0x50>;
+		reg-names = "sflash-regs";
+		flash at 0 {
+			compatible = "jedec,spi-nor";
+			spi-rx-bus-width = <1>;
+			spi-max-frequency = <108000000>;
+		};
+	};
+};
arch/arm/mach-cortina/Makefile new file +5 -0
new file mode 100644
index 0000000..ffb8692
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2020 Cortina Access Inc.
+#
+obj-y += lowlevel_init.o
board/cortina/presidio-asic/Kconfig new file +18 -0
new file mode 100644
index 0000000..8e6f6cf
@@ -0,0 +1,18 @@
+if TARGET_PRESIDIO_ASIC
+config BIT64
+       bool
+       default y
+
+select SOC_CA7774
+
+config SYS_BOARD
+	default "presidio-asic"
+
+config SYS_VENDOR
+	default "cortina"
+
+config SYS_CONFIG_NAME
+	default "presidio_asic"
+
+source "board/cortina/common/Kconfig"
+endif
board/cortina/presidio-asic/MAINTAINERS new file +6 -0
new file mode 100644
index 0000000..9db17bd
@@ -0,0 +1,6 @@
+Cortina Presidio ASIC G3 Engineering BOARD
+M:	Alex Nemirovsky <[email protected]>
+S:	Supported
+F:	board/cortina/presidio-asic/
+F:	include/configs/presidio_asic.h
+F:	configs/cortina_presidio-asic*defconfig
board/cortina/presidio-asic/Makefile new file +8 -0
new file mode 100644
index 0000000..d167a15
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier:	GPL-2.0+
+#
+# (C) Copyright 2020 Cortina-Access.Inc.
+#
+#
+
+obj-y	:= presidio.o
+obj-y	+= lowlevel_init.o
board/cortina/presidio-asic/lowlevel_init.S new file +87 -0
new file mode 100644
index 0000000..4450a5d
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Cortina-Access
+ *
+ */
+
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <linux/linkage.h>
+#include <asm/macro.h>
+#include <asm/armv8/mmu.h>
+
+	.globl lowlevel_init
+lowlevel_init:
+	mov	x29, lr			/* Save LR */
+
+#if defined(CONFIG_SOC_CA7774)
+	/* Enable SMPEN in CPUECTLR */
+	mrs     x0, s3_1_c15_c2_1
+	tst     x0, #0x40
+        b.ne    skip_smp_setup
+	orr     x0, x0, #0x40
+	msr     s3_1_c15_c2_1, x0
+skip_smp_setup:
+#endif
+
+#if defined(CONFIG_SOC_CA8277B)
+	/* Enable CPU Timer */
+	ldr x0, =CONFIG_SYS_TIMER_BASE
+	mov x1, #1
+	str w1, [x0]
+#endif
+
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+	branch_if_slave x0, 1f
+#ifndef CONFIG_TARGET_VENUS
+	ldr	x0, =GICD_BASE
+	bl	gic_init_secure
+#endif
+1:
+#if defined(CONFIG_GICV3)
+	ldr	x0, =GICR_BASE
+	bl	gic_init_secure_percpu
+#elif defined(CONFIG_GICV2)
+	ldr	x0, =GICD_BASE
+	ldr	x1, =GICC_BASE
+	bl	gic_init_secure_percpu
+#endif
+#endif
+
+#ifdef CONFIG_ARMV8_MULTIENTRY
+	branch_if_master x0, x1, 2f
+
+	/*
+	 * Slave should wait for master clearing spin table.
+	 * This sync prevent salves observing incorrect
+	 * value of spin table and jumping to wrong place.
+	 */
+#if defined(CONFIG_GICV2) || defined(CONFIG_GICV3)
+#ifdef CONFIG_GICV2
+	ldr	x0, =GICC_BASE
+#endif
+	bl	gic_wait_for_interrupt
+#endif
+
+	/*
+	 * All slaves will enter EL2 and optionally EL1.
+	 */
+	adr	x4, lowlevel_in_el2
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el2
+
+lowlevel_in_el2:
+#ifdef CONFIG_ARMV8_SWITCH_TO_EL1
+	adr	x4, lowlevel_in_el1
+	ldr	x5, =ES_TO_AARCH64
+	bl	armv8_switch_to_el1
+
+lowlevel_in_el1:
+#endif
+
+#endif /* CONFIG_ARMV8_MULTIENTRY */
+
+2:
+	mov	lr, x29			/* Restore LR */
+	ret
board/cortina/presidio-asic/presidio.c new file +134 -0
new file mode 100644
index 0000000..b4fa01f
@@ -0,0 +1,134 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 - Cortina Access Inc.
+ *
+ */
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <configs/presidio_asic.h>
+#include <linux/psci.h>
+#include <asm/psci.h>
+#include <cpu_func.h>
+#include <asm/armv8/mmu.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CA_PERIPH_BASE                  0xE0000000UL
+#define CA_PERIPH_SIZE                  0x20000000UL
+#define CA_GLOBAL_BASE                  0xf4320000
+#define CA_GLOBAL_JTAG_ID               0xf4320000
+#define CA_GLOBAL_BLOCK_RESET           0xf4320004
+#define CA_GLOBAL_BLOCK_RESET_RESET_DMA BIT(16)
+#define CA_DMA_SEC_SSP_BAUDRATE_CTRL    0xf7001b94
+#define CA_DMA_SEC_SSP_ID               0xf7001b80
+
+int print_cpuinfo(void)
+{
+	printf("CPU:   Cortina Presidio G3\n");
+	return 0;
+}
+
+static struct mm_region presidio_mem_map[] = {
+	{
+	.virt = DDR_BASE,
+	.phys = DDR_BASE,
+	.size = PHYS_SDRAM_1_SIZE,
+	.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+		 PTE_BLOCK_OUTER_SHARE
+	},
+	{
+	.virt = CA_PERIPH_BASE,
+	.phys = CA_PERIPH_BASE,
+	.size = CA_PERIPH_SIZE,
+	.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+		 PTE_BLOCK_NON_SHARE
+	},
+	{
+	/* List terminator */
+	0,
+	}
+};
+
+struct mm_region *mem_map = presidio_mem_map;
+
+static noinline int invoke_psci_fn_smc(u64 function_id, u64 arg0, u64 arg1,
+				       u64 arg2)
+{
+	asm volatile("mov x0, %0\n"
+		    "mov x1, %1\n"
+		    "mov x2, %2\n"
+		    "mov x3, %3\n"
+		    "smc	#0\n"
+		    : "+r" (function_id)
+		    : "r" (arg0), "r" (arg1), "r" (arg2)
+		    );
+
+	return function_id;
+}
+
+int board_early_init_r(void)
+{
+	dcache_disable();
+	return 0;
+}
+
+int board_init(void)
+{
+	unsigned int reg_data, jtag_id;
+
+	/* Enable timer */
+	writel(1, CONFIG_SYS_TIMER_BASE);
+
+	/* Enable snoop in CCI400 slave port#4 */
+	writel(3, 0xF5595000);
+
+	jtag_id = readl(CA_GLOBAL_JTAG_ID);
+
+	/* If this is HGU variant then do not use
+	 * the Saturn daughter card ref. clk
+	 */
+	if (jtag_id == 0x1010D8F3) {
+		reg_data = readl(0xF3100064);
+		/* change multifunc. REF CLK pin to
+		 * a simple GPIO pin
+		 */
+		reg_data |= (1 << 1);
+		writel(reg_data, 0xf3100064);
+	}
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	unsigned int ddr_size;
+
+	ddr_size = readl(0x111100c);
+	gd->ram_size = ddr_size * 0x100000;
+	return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+	invoke_psci_fn_smc(PSCI_0_2_FN_SYSTEM_RESET, 0, 0, 0);
+}
+
+#ifdef CONFIG_LAST_STAGE_INIT
+int last_stage_init(void)
+{
+	u32 val;
+
+	val = readl(CA_GLOBAL_BLOCK_RESET);
+	val &= ~CA_GLOBAL_BLOCK_RESET_RESET_DMA;
+	writel(val, CA_GLOBAL_BLOCK_RESET);
+
+	/* reduce output pclk ~3.7Hz to save power consumption */
+	writel(0x000000FF, CA_DMA_SEC_SSP_BAUDRATE_CTRL);
+
+	return 0;
+}
+#endif
configs/cortina_presidio-asic-base_defconfig new file +29 -0
new file mode 100644
index 0000000..ec64bd2
@@ -0,0 +1,29 @@
+CONFIG_ARM=y
+# CONFIG_SYS_ARCH_TIMER is not set
+CONFIG_TARGET_PRESIDIO_ASIC=y
+CONFIG_SYS_TEXT_BASE=0x04000000
+CONFIG_DM_GPIO=y
+CONFIG_ENV_SIZE=0x20000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SHOW_BOOT_PROGRESS=y
+CONFIG_BOOTDELAY=3
+CONFIG_USE_BOOTARGS=y
+CONFIG_BOOTARGS="earlycon=serial,0xf4329148 console=ttyS0,115200 root=/dev/ram0"
+CONFIG_BOARD_EARLY_INIT_R=y
+CONFIG_SYS_PROMPT="G3#"
+CONFIG_CMD_WDT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_TIMER=y
+CONFIG_CMD_SMC=y
+CONFIG_OF_CONTROL=y
+CONFIG_OF_LIVE=y
+CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
+# CONFIG_NET is not set
+CONFIG_DM=y
+CONFIG_CORTINA_GPIO=y
+# CONFIG_MMC is not set
+CONFIG_DM_SERIAL=y
+CONFIG_CORTINA_UART=y
+CONFIG_WDT=y
+CONFIG_WDT_CORTINA=y
include/configs/presidio_asic.h new file +75 -0
new file mode 100644
index 0000000..023092e
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2020 Cortina Access Inc.
+ *
+ * Configuration for Cortina-Access Presidio board.
+ */
+
+#ifndef __PRESIDIO_ASIC_H
+#define __PRESIDIO_ASIC_H
+
+#define CONFIG_REMAKE_ELF
+
+#define CONFIG_SUPPORT_RAW_INITRD
+
+#define CONFIG_SYS_INIT_SP_ADDR		0x00100000
+#define CONFIG_SYS_BOOTM_LEN		0x00c00000
+
+/* Generic Timer Definitions */
+#define COUNTER_FREQUENCY		25000000
+#define CONFIG_SYS_TIMER_RATE		COUNTER_FREQUENCY
+#define CONFIG_SYS_TIMER_COUNTER	0xf4321008
+
+/* note: arch/arm/cpu/armv8/start.S which references GICD_BASE/GICC_BASE
+ * does not yet support DT. Thus define it here.
+ */
+#define CONFIG_GICV2
+#define GICD_BASE			0xf7011000
+#define GICC_BASE			0xf7012000
+
+#define CONFIG_SYS_MEMTEST_SCRATCH	0x00100000
+#define CONFIG_SYS_MEMTEST_START	0x05000000
+#define CONFIG_SYS_MEMTEST_END		0x0D000000
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (8 << 20))
+
+#define CONFIG_SYS_TIMER_BASE		0xf4321000
+
+/* Use external clock source */
+#define PRESIDIO_APB_CLK		125000000
+#define CORTINA_PER_IO_FREQ		PRESIDIO_APB_CLK
+
+/* Cortina Serial Configuration */
+#define CORTINA_UART_CLOCK		(PRESIDIO_APB_CLK)
+#define CORTINA_SERIAL_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
+					 (void *)CONFIG_SYS_SERIAL1}
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_SERIAL0		PER_UART0_CFG
+#define CONFIG_SYS_SERIAL1		PER_UART1_CFG
+
+/* BOOTP options */
+#define CONFIG_BOOTP_BOOTFILESIZE
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LOAD_ADDR		(DDR_BASE + 0x10000000)
+#define CONFIG_LAST_STAGE_INIT
+
+/* SDRAM Bank #1 */
+#define DDR_BASE			0x00000000
+#define PHYS_SDRAM_1			DDR_BASE
+#define PHYS_SDRAM_1_SIZE		0x80000000 /* 2GB */
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+/* max command args */
+#define CONFIG_SYS_MAXARGS		64
+#define CONFIG_EXTRA_ENV_SETTINGS	"silent=y\0"
+
+#endif /* __PRESIDIO_ASIC_H */
Signature · 1 line
2.7.4
#13 lore raw

PATCH v4 6/6 board: presidio-asic: Add basic G3 engr. development board support

In reply to Alex Nemirovsky
Quoted 3 lines · Alex Nemirovsky

Add basic Presidio G3 engineering board support

Applied to u-boot/master, thanks!

Signature · 8 lines
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.denx.de/pipermail/u-boot/attachments/20200207/6a8f63c4/attachment.sig>