Skip to contentSkip to conversation

patch "USB: misc: iowarrior: add support for the 28 and 28L devices" added to usb-linus

PATCH [email protected] 1 participant 1 message Feb 12, 2020

Subsystems (2)
Stable branch USB
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

USB: misc: iowarrior: add support for the 28 and 28L devices

to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 5f6f8da2d7b5a431d3f391d0d73ace8edfb42af7 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <[email protected]>
Date: Tue, 11 Feb 2020 20:04:22 -0800
Subject: USB: misc: iowarrior: add support for the 28 and 28L devices

Add new device ids for the 28 and 28L devices. These have 4 interfaces instead of 2, but the driver binds the same, so the driver changes are minimal.

Cc Christoph Jung <[email protected]>
Cc stable <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/usb/misc/iowarrior.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)
drivers/usb/misc/iowarrior.c +13 -2
index 990acbe14852..d20b60acfe8a 100644
@@ -33,6 +33,9 @@
 #define USB_DEVICE_ID_CODEMERCS_IOWPV2	0x1512
 /* full speed iowarrior */
 #define USB_DEVICE_ID_CODEMERCS_IOW56	0x1503
+/* fuller speed iowarrior */
+#define USB_DEVICE_ID_CODEMERCS_IOW28	0x1504
+#define USB_DEVICE_ID_CODEMERCS_IOW28L	0x1505
 
 /* OEMed devices */
 #define USB_DEVICE_ID_CODEMERCS_IOW24SAG	0x158a

@@ -139,6 +142,8 @@ static const struct usb_device_id iowarrior_ids[] = {
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW24SAG)},
 	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW56AM)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28)},
+	{USB_DEVICE(USB_VENDOR_ID_CODEMERCS, USB_DEVICE_ID_CODEMERCS_IOW28L)},
 	{}			/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, iowarrior_ids);

@@ -379,6 +384,8 @@ static ssize_t iowarrior_write(struct file *file,
 		break;
 	case USB_DEVICE_ID_CODEMERCS_IOW56:
 	case USB_DEVICE_ID_CODEMERCS_IOW56AM:
+	case USB_DEVICE_ID_CODEMERCS_IOW28:
+	case USB_DEVICE_ID_CODEMERCS_IOW28L:
 		/* The IOW56 uses asynchronous IO and more urbs */
 		if (atomic_read(&dev->write_busy) == MAX_WRITES_IN_FLIGHT) {
 			/* Wait until we are below the limit for submitted urbs */

@@ -777,7 +784,9 @@ static int iowarrior_probe(struct usb_interface *interface,
 	}
 
 	if ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
-	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)) {
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+	    (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)) {
 		res = usb_find_last_int_out_endpoint(iface_desc,
 				&dev->int_out_endpoint);
 		if (res) {

@@ -791,7 +800,9 @@ static int iowarrior_probe(struct usb_interface *interface,
 	dev->report_size = usb_endpoint_maxp(dev->int_in_endpoint);
 	if ((dev->interface->cur_altsetting->desc.bInterfaceNumber == 0) &&
 	    ((dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56) ||
-	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM)))
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW56AM) ||
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28) ||
+	     (dev->product_id == USB_DEVICE_ID_CODEMERCS_IOW28L)))
 		/* IOWarrior56 has wMaxPacketSize different from report size */
 		dev->report_size = 7;
Signature · 1 line
2.25.0