arm: dts: lx2160aqds: Add FSPI node properties
PATCH v2 1/1 arm: dts: lx2160aqds: Add FSPI node properties
lx2160a-qds has 2 micron "mt35xu512aba" flashes of size 64M each connected on A0 and B1 i.e on CS0 and CS3. Since flashes are connected on different buses, only one flash can be probed at a time.
Add fspi node properties aligned with LX2160A-RDB fspi properties.
---
v2: Update flash nodes as per compatibles
arch/arm/dts/fsl-lx2160a-qds.dts | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
arch/arm/dts/fsl-lx2160a-qds.dts +15 -0
@@ -13,6 +13,9 @@ / { model = "NXP Layerscape LX2160AQDS Board"; compatible = "fsl,lx2160aqds", "fsl,lx2160a"; + aliases { + spi0 = &fspi; + }; }; &esdhc0 {
@@ -46,6 +49,18 @@ }; }; +&fspi { + status = "okay"; + + mt35xu512aba0: flash at 0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + }; +}; + &sata0 { status = "okay"; };
Signature · 1 line
2.7.4
PATCH v2 1/1 arm: dts: lx2160aqds: Add FSPI node properties
Quoted 8 lines
-----Original Message-----
From: U-Boot <[email protected]> On Behalf Of Kuldeep Singh
Sent: Monday, March 2, 2020 4:39 PM
To: u-boot at lists.denx.de
Cc: Priyanka Jain <[email protected]>; Kuldeep Singh <[email protected]>
Subject: [Patch v2] arm: dts: lx2160aqds: Add FSPI node properties
Quoted 8 lines
lx2160a-qds has 2 micron "mt35xu512aba" flashes of size 64M each connected on A0 and B1 i.e on CS0 and CS3. Since flashes are connected on different buses, only one flash can be probed at a time.
Add fspi node properties aligned with LX2160A-RDB fspi properties.
Signed-off-by Kuldeep Singh <[email protected]>---
Applied to u-boot-fsl-qoriq. Waiting upstream
Thanks
Priyanka