Changed all sensor values Thermal-zones node
Subsystems (4)
cover Changed all sensor values Thermal-zones node
Changes:
* changed threshold values to 110C
* changed trip point to critical
Rajeshwari (1):
arm64: dts: qcom: sc7180: Changed all sensor values Thermal-zones node
arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 26 deletions(-)
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
PATCH 1/1 arm64: dts: qcom: sc7180: Changed all sensor values Thermal-zones node
To enable kernel critical shutdown feature all sensors threshold values should be 110C to perform shutdown in orderly manner and changed trip point from hot to critical.
--- arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 26 deletions(-)
arch/arm64/boot/dts/qcom/sc7180.dtsi +26 -26
@@ -1952,9 +1952,9 @@ trips { aoss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2007,9 +2007,9 @@ trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2022,9 +2022,9 @@ trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2037,9 +2037,9 @@ trips { aoss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2052,9 +2052,9 @@ trips { cwlan_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2067,9 +2067,9 @@ trips { audio_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2082,9 +2082,9 @@ trips { ddr_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2097,9 +2097,9 @@ trips { q6_hvx_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2112,9 +2112,9 @@ trips { camera_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2127,9 +2127,9 @@ trips { mdm_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2142,9 +2142,9 @@ trips { mdm_dsp_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2157,9 +2157,9 @@ trips { npu_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
@@ -2172,9 +2172,9 @@ trips { video_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };
Signature · 2 lines
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
Re: [PATCH 1/1] arm64: dts: qcom: sc7180: Changed all sensor values Thermal-zones node
Quoted 4 lines · Rajeshwari
To enable kernel critical shutdown feature all sensors threshold values should be 110C to perform shutdown in orderly manner and changed trip point from hot to critical.
IMO, we should keep the hot trip at 90 so we can potentially use it for notifications via the ops->notify callback in the future.
Just add a new critical trip section to all these non-CPU thermal zones if you want to trigger the orderly shutdown when one of them reaches the threshold.
Quoted 169 lines
Signed-off-by Rajeshwari <[email protected]>--- arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 26 deletions(-)arch/arm64/boot/dts/qcom/sc7180.dtsi +26
-27@@ -1952,9 +1952,9 @@ trips { aoss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2007,9 +2007,9 @@ trips { gpuss0_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2022,9 +2022,9 @@ trips { gpuss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2037,9 +2037,9 @@ trips { aoss1_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2052,9 +2052,9 @@ trips { cwlan_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2067,9 +2067,9 @@ trips { audio_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2082,9 +2082,9 @@ trips { ddr_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2097,9 +2097,9 @@ trips { q6_hvx_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2112,9 +2112,9 @@ trips { camera_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2127,9 +2127,9 @@ trips { mdm_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2142,9 +2142,9 @@ trips { mdm_dsp_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2157,9 +2157,9 @@ trips { npu_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; };@@ -2172,9 +2172,9 @@ trips { video_alert0: trip-point0 { - temperature = <90000>; + temperature = <110000>; hysteresis = <2000>; - type = "hot"; + type = "critical"; }; }; }; --QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation