Skip to contentSkip to conversation

patch "serial: 8250_exar: add support for ACCES cards" added to tty-linus

PATCH [email protected] 1 participant 1 message Mar 5, 2020

Subsystems (2)
Stable branch TTY layer and serial drivers
lore
Share & tools
lore

[email protected]

author maintainer Applied
#0 lore raw

This is a note to let you know that I've just added the patch titled

serial: 8250_exar: add support for ACCES cards

to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.

The patch will show up in the next release of the linux-next tree (usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the next -rc kernel release.

If you have any questions about this process, please let me know.

From 10c5ccc3c6d32f3d7d6c07de1d3f0f4b52f3e3ab Mon Sep 17 00:00:00 2001
From: Jay Dolan <[email protected]>
Date: Thu, 5 Mar 2020 06:05:04 -0800
Subject: serial: 8250_exar: add support for ACCES cards

Add ACCES VIDs and PIDs that use the Exar chips

Signed-off-by Jay Dolan <[email protected]>
Cc stable <[email protected]>
Link https://lore.kernel.org/r/[email protected] open here
Signed-off-by Greg Kroah-Hartman <[email protected]>
---
 drivers/tty/serial/8250/8250_exar.c | 33 +++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)
drivers/tty/serial/8250/8250_exar.c +33 -0
index 91e9b070d36d..d330da76d6b6 100644
@@ -25,6 +25,14 @@
 
 #include "8250.h"
 
+#define PCI_DEVICE_ID_ACCES_COM_2S		0x1052
+#define PCI_DEVICE_ID_ACCES_COM_4S		0x105d
+#define PCI_DEVICE_ID_ACCES_COM_8S		0x106c
+#define PCI_DEVICE_ID_ACCES_COM232_8		0x10a8
+#define PCI_DEVICE_ID_ACCES_COM_2SM		0x10d2
+#define PCI_DEVICE_ID_ACCES_COM_4SM		0x10db
+#define PCI_DEVICE_ID_ACCES_COM_8SM		0x10ea
+
 #define PCI_DEVICE_ID_COMMTECH_4224PCI335	0x0002
 #define PCI_DEVICE_ID_COMMTECH_4222PCI335	0x0004
 #define PCI_DEVICE_ID_COMMTECH_2324PCI335	0x000a

@@ -677,6 +685,22 @@ static int __maybe_unused exar_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(exar_pci_pm, exar_suspend, exar_resume);
 
+static const struct exar8250_board acces_com_2x = {
+	.num_ports	= 2,
+	.setup		= pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_4x = {
+	.num_ports	= 4,
+	.setup		= pci_xr17c154_setup,
+};
+
+static const struct exar8250_board acces_com_8x = {
+	.num_ports	= 8,
+	.setup		= pci_xr17c154_setup,
+};
+
+
 static const struct exar8250_board pbn_fastcom335_2 = {
 	.num_ports	= 2,
 	.setup		= pci_fastcom335_setup,

@@ -745,6 +769,15 @@ static const struct exar8250_board pbn_exar_XR17V8358 = {
 	}
 
 static const struct pci_device_id exar_pci_tbl[] = {
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_2S, acces_com_2x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_4S, acces_com_4x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_8S, acces_com_8x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM232_8, acces_com_8x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_2SM, acces_com_2x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_4SM, acces_com_4x),
+	EXAR_DEVICE(ACCESSIO, ACCES_COM_8SM, acces_com_8x),
+
+
 	CONNECT_DEVICE(XR17C152, UART_2_232, pbn_connect),
 	CONNECT_DEVICE(XR17C154, UART_4_232, pbn_connect),
 	CONNECT_DEVICE(XR17C158, UART_8_232, pbn_connect),
Signature · 1 line
2.25.1