bnxt_en: Updates.
Michael Chan
maintainercover bnxt_en: Updates.
This series includes simplification and improvement of NAPI polling logic in bnxt_poll_p5(). The improvements will prevent starving the async events from firmware if we are in continuous NAPI polling. The rest of the patches include cleanups, a better return code for firmware busy, and to clear devlink port type more properly.
Michael Chan (4):
bnxt_en: Handle all NQ notifications in bnxt_poll_p5().
bnxt_en: Simplify __bnxt_poll_cqs_done().
bnxt_en: Process the NQ under NAPI continuous polling.
bnxt_en: Clear DCB settings after firmware reset.
Vasundhara Volam (4):
bnxt_en: Remove unnecessary assignment of return code
bnxt_en: Modify some bnxt_hwrm_*_free() functions to void.
bnxt_en: Return -EAGAIN if fw command returns BUSY
bnxt_en: Call devlink_port_type_clear() in remove()
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 101 +++++++++------------- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 19 ++-- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 +- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 4 +- 4 files changed, 49 insertions(+), 80 deletions(-)
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 1/8 bnxt_en: Handle all NQ notifications in bnxt_poll_p5().
In bnxt_poll_p5(), the logic polls for up to 2 completion rings (RX and TX) for work. In the current code, if we reach budget polling the first completion ring, we will stop. If the other completion ring has work to do, we will handle it when NAPI calls us back.
This is not optimal. We potentially leave an unproceesed entry in the NQ. When we are finally done with NAPI polling and re-enable interrupt, the remaining entry in the NQ will cause interrupt to be triggered immediately for no reason.
Modify the code in bnxt_poll_p5() to keep looping until all NQ entries are handled even if the first completion ring has reached budget.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +4 -3
@@ -2438,6 +2438,9 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget) nqcmp = &cpr->nq_desc_ring[CP_RING (cons)][CP_IDX (cons)];if (!NQ_CMP_VALID (nqcmp, raw_cons)) { +if (cpr->has_more_work) +break ; +__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL , false); cpr->cp_raw_cons = raw_cons;
@@ -2459,13 +2462,11 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget) cpr2 = cpr->cp_ring_arr[idx]; work_done +=__bnxt_poll_work (bp, cpr2, budget - work_done); - cpr->has_more_work = cpr2->has_more_work; + cpr->has_more_work |= cpr2->has_more_work; }else {bnxt_hwrm_handler (bp, (struct tx_cmp *)nqcmp); } raw_cons =NEXT_RAW_CMP (raw_cons); -if (cpr->has_more_work) -break ; }__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ , true); cpr->cp_raw_cons = raw_cons;
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 2/8 bnxt_en: Simplify __bnxt_poll_cqs_done().
In reply to Michael ChanSimplify the function by removing tha 'all' parameter. In the current code, the caller has to specify whether to update/arm both completion rings with the 'all' parameter.
Instead of this, we can just update/arm all the completion rings that have been polled. By setting cpr->had_work_done earlier in __bnxt_poll_work(), we know which completion ring has been polled and can just update/arm all the completion rings with cpr->had_work_done set.
This simplifies the function with one less parameter and works just as well.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +7 -8
@@ -2162,6 +2162,7 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,struct tx_cmp *txcmp; cpr->has_more_work =0 ; + cpr->had_work_done =1 ;while (1 ) {int rc;
@@ -2175,7 +2176,6 @@ static int __bnxt_poll_work(struct bnxt *bp, struct bnxt_cp_ring_info *cpr,* reading any further. */ dma_rmb (); - cpr->had_work_done =1 ;if (TX_CMP_TYPE (txcmp) ==CMP_TYPE_TX_L2_CMP ) { tx_pkts++;/* return full budget so NAPI will complete. */
@@ -2392,7 +2392,7 @@ static int __bnxt_poll_cqs(struct bnxt *bp, struct bnxt_napi *bnapi, int budget) }static void __bnxt_poll_cqs_done (struct bnxt *bp,struct bnxt_napi *bnapi, -u64 dbr_type,bool all) +u64 dbr_type) {struct bnxt_cp_ring_info *cpr = &bnapi->cp_ring;int i;
@@ -2401,7 +2401,7 @@ static void __bnxt_poll_cqs_done(struct bnxt *bp, struct bnxt_napi *bnapi,struct bnxt_cp_ring_info *cpr2 = cpr->cp_ring_arr[i];struct bnxt_db_info *db; -if (cpr2 && (all || cpr2->had_work_done)) { +if (cpr2 && cpr2->had_work_done) { db = &cpr2->cp_db;writeq (db->db_key64 | dbr_type |RING_CMP (cpr2->cp_raw_cons), db->doorbell);
@@ -2425,10 +2425,10 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget) cpr->has_more_work =0 ; work_done =__bnxt_poll_cqs (bp, bnapi, budget);if (cpr->has_more_work) { -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ , false); +__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ );return work_done; } -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL , true); +__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL );if (napi_complete_done (napi, work_done))BNXT_DB_NQ_ARM_P5 (&cpr->cp_db, cpr->cp_raw_cons);return work_done;
@@ -2441,8 +2441,7 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget)if (cpr->has_more_work)break ; -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL , - false); +__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL ); cpr->cp_raw_cons = raw_cons;if (napi_complete_done (napi, work_done)) BNXT_DB_NQ_ARM_P5(&cpr->cp_db,
@@ -2468,7 +2467,7 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget) } raw_cons =NEXT_RAW_CMP (raw_cons); } -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ , true); +__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ ); cpr->cp_raw_cons = raw_cons;return work_done; }
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 3/8 bnxt_en: Process the NQ under NAPI continuous polling.
In reply to Michael ChanWhen we are in continuous NAPI polling mode, the current code in bnxt_poll_p5() will only process the completion rings and will not process the NQ until interrupt is re-enabled. Tis logic works and will not cause RX or TX starvation, but async events in the NQ may be delayed for the duration of continuous NAPI polling. These async events may be firmware or VF events.
Continue to handle the NQ after we are done polling the completion rings. This actually simplies the code in bnxt_poll_p5().
Acknowledge the NQ so these async events will not overflow.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +4 -9
@@ -2424,14 +2424,6 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget)if (cpr->has_more_work) { cpr->has_more_work =0 ; work_done =__bnxt_poll_cqs (bp, bnapi, budget); -if (cpr->has_more_work) { -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ ); -return work_done; - } -__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ_ARMALL ); -if (napi_complete_done (napi, work_done)) -BNXT_DB_NQ_ARM_P5 (&cpr->cp_db, cpr->cp_raw_cons); -return work_done; }while (1 ) { cons =RING_CMP (raw_cons);
@@ -2468,7 +2460,10 @@ static int bnxt_poll_p5(struct napi_struct *napi, int budget) raw_cons =NEXT_RAW_CMP (raw_cons); }__bnxt_poll_cqs_done (bp, bnapi,DBR_TYPE_CQ ); - cpr->cp_raw_cons = raw_cons; +if (raw_cons != cpr->cp_raw_cons) { + cpr->cp_raw_cons = raw_cons; +BNXT_DB_NQ_P5 (&cpr->cp_db, raw_cons); + }return work_done; }
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 4/8 bnxt_en: Clear DCB settings after firmware reset.
In reply to Michael ChanThe driver stores a copy of the DCB settings that have been applied to the firmware. After firmware reset, the firmware settings are gone and will revert back to default. Clear the driver's copy so that if there is a DCBNL request to get the settings, the driver will retrieve the current settings from the firmware. lldpad keeps the DCB settings in userspace and will re-apply the settings if it is running.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -0
@@ -8787,6 +8787,7 @@ static int bnxt_hwrm_if_change(struct bnxt *bp, bool up)bnxt_free_ctx_mem (bp);kfree (bp->ctx); bp->ctx =NULL ; +bnxt_dcb_free (bp); rc =bnxt_fw_init_one (bp);if (rc) {set_bit (BNXT_STATE_ABORT_ERR , &bp->state);
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 5/8 bnxt_en: Remove unnecessary assignment of return code
In reply to Michael ChanFrom: Vasundhara Volam <[email protected]>
As part of converting error code in firmware message to standard code, checking for firmware return code is removed in most of the places. Remove the assignment of return code where the function can directly return.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 37 ++++++++--------------- drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c | 19 ++++-------- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 5 ++- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 4 +-- 4 files changed, 21 insertions(+), 44 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +12 -25
@@ -5838,8 +5838,7 @@ bnxt_hwrm_reserve_pf_rings(struct bnxt *bp, int tx_rings, int rx_rings,if (bp->hwrm_spec_code <0x10601 ) bp->hw_resc.resv_tx_rings = tx_rings; - rc =bnxt_hwrm_get_rings (bp); -return rc; +return bnxt_hwrm_get_rings (bp); } static int
@@ -5860,8 +5859,7 @@ bnxt_hwrm_reserve_vf_rings(struct bnxt *bp, int tx_rings, int rx_rings,if (rc)return rc; - rc =bnxt_hwrm_get_rings (bp); -return rc; +return bnxt_hwrm_get_rings (bp); } static int bnxt_hwrm_reserve_rings(struct bnxt *bp, int tx, int rx, int grp,
@@ -6021,7 +6019,6 @@ static int bnxt_hwrm_check_vf_rings(struct bnxt *bp, int tx_rings, int rx_rings, {struct hwrm_func_vf_cfg_input req = {0 };u32 flags; -int rc;if (!BNXT_NEW_RM (bp))return 0 ;
@@ -6038,8 +6035,8 @@ static int bnxt_hwrm_check_vf_rings(struct bnxt *bp, int tx_rings, int rx_rings, flags |=FUNC_VF_CFG_REQ_FLAGS_RING_GRP_ASSETS_TEST ; req.flags =cpu_to_le32 (flags); - rc =hwrm_send_message_silent (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message_silent (bp, &req,sizeof (req), +HWRM_CMD_TIMEOUT ); } static int bnxt_hwrm_check_pf_rings(struct bnxt *bp, int tx_rings, int rx_rings,
@@ -6048,7 +6045,6 @@ static int bnxt_hwrm_check_pf_rings(struct bnxt *bp, int tx_rings, int rx_rings, {struct hwrm_func_cfg_input req = {0 };u32 flags; -int rc;__bnxt_hwrm_reserve_pf_rings (bp, &req, tx_rings, rx_rings, ring_grps, cp_rings, stats, vnics);
@@ -6066,8 +6062,8 @@ static int bnxt_hwrm_check_pf_rings(struct bnxt *bp, int tx_rings, int rx_rings, } req.flags =cpu_to_le32 (flags); - rc =hwrm_send_message_silent (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message_silent (bp, &req,sizeof (req), +HWRM_CMD_TIMEOUT ); } static int bnxt_hwrm_check_rings(struct bnxt *bp, int tx_rings, int rx_rings,
@@ -6539,8 +6535,8 @@ static int bnxt_hwrm_func_backing_store_cfg(struct bnxt *bp, u32 enables)__le64 *pg_dir;u32 flags =0 ;u8 *pg_attr; -int i, rc;u32 ena; +int i;if (!ctx)return 0 ;
@@ -6627,8 +6623,7 @@ static int bnxt_hwrm_func_backing_store_cfg(struct bnxt *bp, u32 enables)bnxt_hwrm_set_pg_attr (&ctx_pg->ring_mem, pg_attr, pg_dir); } req.flags =cpu_to_le32 (flags); - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); } static int bnxt_alloc_ctx_mem_blk(struct bnxt *bp,
@@ -7332,7 +7327,6 @@ int bnxt_hwrm_fw_set_time(struct bnxt *bp)static int bnxt_hwrm_port_qstats (struct bnxt *bp) { -int rc;struct bnxt_pf_info *pf = &bp->pf;struct hwrm_port_qstats_input req = {0 };
@@ -7343,8 +7337,7 @@ static int bnxt_hwrm_port_qstats(struct bnxt *bp) req.port_id =cpu_to_le16 (pf->port_id); req.tx_stat_host_addr =cpu_to_le64 (bp->hw_tx_port_stats_map); req.rx_stat_host_addr =cpu_to_le64 (bp->hw_rx_port_stats_map); - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_port_qstats_ext (struct bnxt *bp)
@@ -7498,7 +7491,6 @@ static void bnxt_hwrm_resource_free(struct bnxt *bp, bool close_path,static int bnxt_hwrm_set_br_mode (struct bnxt *bp,u16 br_mode) {struct hwrm_func_cfg_input req = {0 }; -int rc;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_FUNC_CFG ,-1 ,-1 ); req.fid =cpu_to_le16 (0xffff );
@@ -7509,14 +7501,12 @@ static int bnxt_hwrm_set_br_mode(struct bnxt *bp, u16 br_mode) req.evb_mode =FUNC_CFG_REQ_EVB_MODE_VEPA ; else return -EINVAL; - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_set_cache_line_size (struct bnxt *bp,int size) {struct hwrm_func_cfg_input req = {0 }; -int rc;if (BNXT_VF (bp) || bp->hwrm_spec_code <0x10803 )return 0 ;
@@ -7528,8 +7518,7 @@ static int bnxt_hwrm_set_cache_line_size(struct bnxt *bp, int size)if (size ==128 ) req.options =FUNC_CFG_REQ_OPTIONS_CACHE_LINESIZE_SIZE_128 ; - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int __bnxt_setup_vnic (struct bnxt *bp,u16 vnic_id)
@@ -8883,14 +8872,12 @@ int bnxt_hwrm_alloc_wol_fltr(struct bnxt *bp)int bnxt_hwrm_free_wol_fltr (struct bnxt *bp) {struct hwrm_wol_filter_free_input req = {0 }; -int rc;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_WOL_FILTER_FREE ,-1 ,-1 ); req.port_id =cpu_to_le16 (bp->pf.port_id); req.enables =cpu_to_le32 (WOL_FILTER_FREE_REQ_ENABLES_WOL_FILTER_ID ); req.wol_filter_id = bp->wol_filter_id; - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static u16 bnxt_hwrm_get_wol_fltrs (struct bnxt *bp,u16 handle)
drivers/net/ethernet/broadcom/bnxt/bnxt_dcb.c +6 -13
@@ -39,8 +39,8 @@ static int bnxt_queue_to_tc(struct bnxt *bp, u8 queue_id)static int bnxt_hwrm_queue_pri2cos_cfg (struct bnxt *bp,struct ieee_ets *ets) {struct hwrm_queue_pri2cos_cfg_input req = {0 }; -int rc =0 , i;u8 *pri2cos; +int i;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_QUEUE_PRI2COS_CFG ,-1 ,-1 ); req.flags = cpu_to_le32(QUEUE_PRI2COS_CFG_REQ_FLAGS_PATH_BIDIR |
@@ -56,8 +56,7 @@ static int bnxt_hwrm_queue_pri2cos_cfg(struct bnxt *bp, struct ieee_ets *ets) qidx = bp->tc_to_qidx[ets->prio_tc[i]]; pri2cos[i] = bp->q_info[qidx].queue_id; } - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_queue_pri2cos_qcfg (struct bnxt *bp,struct ieee_ets *ets)
@@ -93,8 +92,8 @@ static int bnxt_hwrm_queue_cos2bw_cfg(struct bnxt *bp, struct ieee_ets *ets, {struct hwrm_queue_cos2bw_cfg_input req = {0 };struct bnxt_cos2bw_cfg cos2bw; -int rc =0 , i;void *data; +int i;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_QUEUE_COS2BW_CFG ,-1 ,-1 );for (i =0 ; i < max_tc; i++) {
@@ -128,8 +127,7 @@ static int bnxt_hwrm_queue_cos2bw_cfg(struct bnxt *bp, struct ieee_ets *ets, req.unused_0 =0 ; } } - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_queue_cos2bw_qcfg (struct bnxt *bp,struct ieee_ets *ets)
@@ -236,7 +234,6 @@ static int bnxt_hwrm_queue_pfc_cfg(struct bnxt *bp, struct ieee_pfc *pfc)unsigned int tc_mask =0 , pri_mask =0 ;u8 i, pri, lltc_count =0 ;bool need_q_remap = false; -int rc;if (!my_ets)return -EINVAL ;
@@ -267,15 +264,11 @@ static int bnxt_hwrm_queue_pfc_cfg(struct bnxt *bp, struct ieee_pfc *pfc) }if (need_q_remap) - rc =bnxt_queue_remap (bp, tc_mask); +bnxt_queue_remap (bp, tc_mask);bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_QUEUE_PFCENABLE_CFG ,-1 ,-1 ); req.flags =cpu_to_le32 (pri_mask); - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -if (rc) -return rc; - -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_queue_pfc_qcfg (struct bnxt *bp,struct ieee_pfc *pfc)
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +2 -3
@@ -2606,7 +2606,7 @@ static int bnxt_set_phys_id(struct net_device *dev,struct bnxt_led_cfg *led_cfg;u8 led_state;__le16 duration; -int i, rc; +int i;if (!bp->num_leds ||BNXT_VF (bp))return -EOPNOTSUPP ;
@@ -2632,8 +2632,7 @@ static int bnxt_set_phys_id(struct net_device *dev, led_cfg->led_blink_off = duration; led_cfg->led_group_id = bp->leds[i].led_group_id; } - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }static int bnxt_hwrm_selftest_irq (struct bnxt *bp,u16 cmpl_ring)
drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +1 -3
@@ -138,7 +138,6 @@ static bool bnxt_is_trusted_vf(struct bnxt *bp, struct bnxt_vf_info *vf)static int bnxt_hwrm_set_trusted_vf (struct bnxt *bp,struct bnxt_vf_info *vf) {struct hwrm_func_cfg_input req = {0 }; -int rc;if (!(bp->fw_cap &BNXT_FW_CAP_TRUSTED_VF ))return 0 ;
@@ -149,8 +148,7 @@ static int bnxt_hwrm_set_trusted_vf(struct bnxt *bp, struct bnxt_vf_info *vf) req.flags =cpu_to_le32 (FUNC_CFG_REQ_FLAGS_TRUSTED_VF_ENABLE ); else req.flags = cpu_to_le32(FUNC_CFG_REQ_FLAGS_TRUSTED_VF_DISABLE); - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); -return rc; +return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); }int bnxt_set_vf_trust (struct net_device *dev,int vf_id,bool trusted)
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 6/8 bnxt_en: Modify some bnxt_hwrm_*_free() functions to void.
In reply to Michael ChanFrom: Vasundhara Volam <[email protected]>
Return code is not needed in some of these functions, as the return code from firmware message is ignored. Remove the unused rc variable and also convert functions to void.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 29 +++++++++++------------------ 1 file changed, 11 insertions(+), 18 deletions(-)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +11 -18
@@ -5060,10 +5060,8 @@ int bnxt_hwrm_vnic_cfg(struct bnxt *bp, u16 vnic_id)return hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); } -static int bnxt_hwrm_vnic_free_one (struct bnxt *bp,u16 vnic_id) +static void bnxt_hwrm_vnic_free_one (struct bnxt *bp,u16 vnic_id) { -u32 rc =0 ; -if (bp->vnic_info[vnic_id].fw_vnic_id !=INVALID_HW_RING_ID ) {struct hwrm_vnic_free_input req = {0 };
@@ -5071,10 +5069,9 @@ static int bnxt_hwrm_vnic_free_one(struct bnxt *bp, u16 vnic_id) req.vnic_id =cpu_to_le32 (bp->vnic_info[vnic_id].fw_vnic_id); - rc =hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); +hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); bp->vnic_info[vnic_id].fw_vnic_id =INVALID_HW_RING_ID ; } -return rc; }static void bnxt_hwrm_vnic_free (struct bnxt *bp)
@@ -5191,14 +5188,13 @@ static int bnxt_hwrm_ring_grp_alloc(struct bnxt *bp)return rc; } -static int bnxt_hwrm_ring_grp_free (struct bnxt *bp) +static void bnxt_hwrm_ring_grp_free (struct bnxt *bp) {u16 i; -u32 rc =0 ;struct hwrm_ring_grp_free_input req = {0 };if (!bp->grp_info || (bp->flags &BNXT_FLAG_CHIP_P5 )) -return 0 ; +return ;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_RING_GRP_FREE ,-1 ,-1 );
@@ -5209,12 +5205,10 @@ static int bnxt_hwrm_ring_grp_free(struct bnxt *bp) req.ring_group_id =cpu_to_le32 (bp->grp_info[i].fw_grp_id); - rc =_hwrm_send_message (bp, &req,sizeof (req), -HWRM_CMD_TIMEOUT ); +_hwrm_send_message (bp, &req,sizeof (req),HWRM_CMD_TIMEOUT ); bp->grp_info[i].fw_grp_id =INVALID_HW_RING_ID ; }mutex_unlock (&bp->hwrm_cmd_lock); -return rc; } static int hwrm_ring_alloc_send_msg(struct bnxt *bp,
@@ -6302,16 +6296,16 @@ int bnxt_hwrm_set_coal(struct bnxt *bp)return rc; } -static int bnxt_hwrm_stat_ctx_free (struct bnxt *bp) +static void bnxt_hwrm_stat_ctx_free (struct bnxt *bp) { -int rc =0 , i;struct hwrm_stat_ctx_free_input req = {0 }; +int i;if (!bp->bnapi) -return 0 ; +return ;if (BNXT_CHIP_TYPE_NITRO_A0 (bp)) -return 0 ; +return ;bnxt_hwrm_cmd_hdr_init (bp, &req,HWRM_STAT_CTX_FREE ,-1 ,-1 );
@@ -6323,14 +6317,13 @@ static int bnxt_hwrm_stat_ctx_free(struct bnxt *bp)if (cpr->hw_stats_ctx_id !=INVALID_STATS_CTX_ID ) { req.stat_ctx_id =cpu_to_le32 (cpr->hw_stats_ctx_id); - rc =_hwrm_send_message (bp, &req,sizeof (req), -HWRM_CMD_TIMEOUT ); +_hwrm_send_message (bp, &req,sizeof (req), +HWRM_CMD_TIMEOUT ); cpr->hw_stats_ctx_id =INVALID_STATS_CTX_ID ; } }mutex_unlock (&bp->hwrm_cmd_lock); -return rc; }static int bnxt_hwrm_stat_ctx_alloc (struct bnxt *bp)
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 7/8 bnxt_en: Return -EAGAIN if fw command returns BUSY
In reply to Michael ChanFrom: Vasundhara Volam <[email protected]>
If firmware command returns error code as HWRM_ERR_CODE_BUSY, which means it cannot handle the command due to a conflicting command from another function, convert it to -EAGAIN. If it is an ethtool operation, this error code will be returned to userspace.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 1 + 1 file changed, 1 insertion(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +1 -0
@@ -4161,6 +4161,7 @@ static int bnxt_hwrm_to_stderr(u32 hwrm_err)case HWRM_ERR_CODE_NO_BUFFER :return -ENOMEM ;case HWRM_ERR_CODE_HOT_RESET_PROGRESS : +case HWRM_ERR_CODE_BUSY :return -EAGAIN ;case HWRM_ERR_CODE_CMD_NOT_SUPPORTED :return -EOPNOTSUPP ;
Signature · 1 line
2.5.1
Michael Chan
maintainerPATCH 8/8 bnxt_en: Call devlink_port_type_clear() in remove()
In reply to Michael ChanFrom: Vasundhara Volam <[email protected]>
Similar to other drivers, properly clear the devlink port type when removing the device before unregistration.
--- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 2 ++ 1 file changed, 2 insertions(+)
drivers/net/ethernet/broadcom/bnxt/bnxt.c +2 -0
@@ -11429,6 +11429,8 @@ static void bnxt_remove_one(struct pci_dev *pdev)bnxt_sriov_disable (bp);bnxt_dl_fw_reporters_destroy (bp, true); +if (BNXT_PF (bp)) +devlink_port_type_clear (&bp->dl_port);pci_disable_pcie_error_reporting (pdev);unregister_netdev (dev);bnxt_dl_unregister (bp);
Signature · 1 line
2.5.1
David Miller
maintainerFrom: Michael Chan <[email protected]>
Date: Sun, 8 Mar 2020 18:45:46 -0400
Quoted 5 lines
This series includes simplification and improvement of NAPI polling logic in
bnxt_poll_p5(). The improvements will prevent starving the async events from firmware if we are in continuous NAPI polling. The rest of the patches include cleanups, a better return code for firmware busy, and to clear devlink port type more properly.
Series applied, thanks Michael.