Skip to contentSkip to conversation

nvmem: mxs-ocotp: Use devm_add_action_or_reset() for cleanup

PATCH In review Anson Huang 2 participants 2 messages Mar 14, 2020 – Mar 18, 2020

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 nvmem: mxs-ocotp: Use devm_add_action_or_reset() for cleanup

Use devm_add_action_or_reset() for cleanup to call clk_unprepare(), which can simplify the error handling in .probe, and .remove callback can be dropped.

---
 drivers/nvmem/mxs-ocotp.c | 30 +++++++++++-------------------
 1 file changed, 11 insertions(+), 19 deletions(-)
drivers/nvmem/mxs-ocotp.c +11 -19
index 8e4898d..588ab56 100644
@@ -130,6 +130,11 @@ static const struct of_device_id mxs_ocotp_match[] = {
 };
 MODULE_DEVICE_TABLE(of, mxs_ocotp_match);
 
+static void mxs_ocotp_action(void *data)
+{
+	clk_unprepare(data);
+}
+
 static int mxs_ocotp_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -160,39 +165,26 @@ static int mxs_ocotp_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = devm_add_action_or_reset(&pdev->dev, mxs_ocotp_action, otp->clk);
+	if (ret)
+		return ret;
+
 	data = match->data;
 
 	ocotp_config.size = data->size;
 	ocotp_config.priv = otp;
 	ocotp_config.dev = dev;
 	otp->nvmem = devm_nvmem_register(dev, &ocotp_config);
-	if (IS_ERR(otp->nvmem)) {
-		ret = PTR_ERR(otp->nvmem);
-		goto err_clk;
-	}
+	if (IS_ERR(otp->nvmem))
+		return PTR_ERR(otp->nvmem);
 
 	platform_set_drvdata(pdev, otp);
 
 	return 0;
-
-err_clk:
-	clk_unprepare(otp->clk);
-
-	return ret;
-}
-
-static int mxs_ocotp_remove(struct platform_device *pdev)
-{
-	struct mxs_ocotp *otp = platform_get_drvdata(pdev);
-
-	clk_unprepare(otp->clk);
-
-	return 0;
 }
 
 static struct platform_driver mxs_ocotp_driver = {
 	.probe = mxs_ocotp_probe,
-	.remove = mxs_ocotp_remove,
 	.driver = {
 		.name = "mxs-ocotp",
 		.of_match_table = mxs_ocotp_match,
Signature · 7 lines
2.7.4


_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
#1 lore raw
Quoted 9 lines · Anson Huang

Use devm_add_action_or_reset() for cleanup to call clk_unprepare(), which can simplify the error handling in .probe, and .remove callback can be dropped.

---
  drivers/nvmem/mxs-ocotp.c | 30 +++++++++++-------------------
  1 file changed, 11 insertions(+), 19 deletions(-)

Applied thanks,

srini